IDOC message type or bapi to create CRM Product hierarchy

hi all,
I tried to tranfer the Product hierarchy to CRM using LSMW, it could not transftered by batch input and I could not find any IDOC message type or bapi to create Product hierarchy. it seemed that I could not using LSMW?
i also found that many BAPIs in CRM were not related with ALE message.so we can not use LSMW using IDOC or BAPI to transfer data? i will very appreciate anyone who can tell me to solve such problem, especially tranfer data to CRM. thanks so much!

hi Ramgopal,
u can check the bapi-BUS1112 for cost center, and from the methods what ever u want u can take based upon requirement
if u find it useful plz mark the points.
check the IDOC method with message type COSMAS and basic type COSMAS1
it should workout now
Regards,
Naveen
Message was edited by: NAVEENKUMAR GUDURI

Similar Messages

CRM: IDOC Message Type: CRMXIF_PARTNER_REL_SAVE_M

Hi,
I'm currently working on a CRM data migration project. I'm using the IDOC Message Type: CRMXIF_PARTNER_REL_SAVE_M to map data into contact relationship structures.
The problem I am having is the above interface works with SAP standard BUR001 type contact relationships. But a copy was taken of BUR001(is contact person for) => ZUR001 (former contact person of). This allows you to add a date range: DATE_TO - DATE_FROM. Using the above interface I am able to map these dates to the ZUR001 type relationships.
All the other data I try and map i.e Function, Telephone No, Fax No ect.. will not map. I'm at a loss as to why not?
note: running CRM 4.0
Any help with this would be greatly appreciated.
Regards,
Philip Johannesen

Thanks Saquib, the OSS note was very informative.
Do you know where I can find " In addition, you can find DXWB/LSMW examples under service.sap.com/CRM-Integration which you can install in a CRM system and use as models."?
I've looked under the new link "service.sap.com/crm-netweaver". But have been unable to find any examples.
I've awarded points as promised.
Regards,
Philip Johannesen

IDoc Message Type to create Inbound Delivery + Confirm + GR

Hi Experts,
I need IDoc message type which can create Inbound Delivery / Confirm / Create GR with Inbound Delivery as reference and i dont want to use DELVRY05
because I need to create Inbound Delivery / PICK / Confirm but not with Transfer Order Creation means Unnecessarily we dont want to create Transfer Orders. We need to exclude Transfer Orders and create GR.
Please do the needful.

Dear Kishore,
It's possible via writing code in enhancement spots of transaction code VL31N, MIGO_GR/MB01.
R,
Amala

Several deliveries are created through IDOC message type DESADV.

Hi Gurus,
Do you happen to know why in IDOC, message type DESADV, FM BORES_IDOC_INPUT_DESADV1, several inbound deliveries are created? What could have been tha reason for the split? One strange thing is, we tried to create an inbound delivery manually using the same material or data in idoc but only one delivery were created. No split occurred.
I tried to investigate and i found out that Idoc uses FM GN_DELIVERY_CREATE while manual creation uses GN_DELIVERY_CREATE_FOR_DIALOG. Do they have difference?
I hope someone can help me on this.
Thanks in advance!

Hi
Answer is pure assumption.
LIKP-ZUKRL is the field used for delivery split, pls check whether you are passing any value for the same
Regards
Madhan D

Idoc/message type related to su01 tcode fields?

hi experts,
when i create a user in su01,an idoc should get triggered.
are there any standard idoc / message type having fields related to this.
thanks,
charu
Edited by: charudevrani on Jan 11, 2012 7:38 AM

Hi Charu,
You can use one of following IDoc types, depending on the action you want to perform on the user master record:
USERCHANGE     Change user
USERCLONE     Create User with Template in Another System
USERCREATE     BAPI to Create a User
Regards,
Marcin

IDOC message type LOIPLO not triggering

Hi Friends
Our client want to send firmed planned orders to External system through outbound IDOC LOIPLO
So we are using MF50 to firm the planned orders.
The idoc message type LOIPLO is not triggering.
How to trigger IDOC message type LOIPLO . What are the settings we have to do.
Regards,
Srihari.M

dear friend,
Message Type : LOIPLO
Basic Type : LOIPLO01
You need not create any custom IDOC type as we are having a standard IDOC type available within SAP, but you need to write a custom function module to read the data from the IDOC segments and then call the below BAPI to post the Planned Order.
Check the input parameters of BAPI and gothrough the documentation of the Basic Type in WE60 transactions, whether all the necessary input parameters of the BAPI are covered in the standard IDOC type, if not then we need to customize the standard basic type to meet the requirements.
Bapi which needs to be used is BAPI_PLANNEDORDER_CREATE
good luck!

IDoc Message Type for VL09

Hi,
Is there an IDoc message type for VL09 (Reverse Goods Issue) for Delivery. Do let me know please.
We are using an ECC 6.0 system (WebAS 700)
Regards,
Aditya

Hi,
You can use this message type MBGMCA, IDoc type MBGMCA01 and process code BAPI.
This process code will call FM IDOC_INPUT_MBGMCA to reverse good movements with MB_CANCEL_GOODS_MOVEMENT.
Regards,
Ferry Lianto

ALE-IDoc : Outbound message control for MIRO,IDoc message type for INVOIC

Dear Experts,
                    I am using the IDoc message type INVOIC. For that i have created the new output type. Then i assinged the the Program RSNASTED and form routine ALE_PROCESSING.
                    But when i am saving the transaction in MIRO i am getting the Update Error like VN 056: Processing log for program RSNASTED
                    Please help me to rectify this problem

Hi Dharmendiran,
We also have the same requirement to send status acconf messages on Inbound INVOIC idoc posting..
Can you let me know how you went about creating new output type..did you mean new output type in NACE for application MR?
Thanks.

Contract creation in Backend with Idoc message type BLAORD

Hello,
We are creating Backend contracts from the Bidding engine functionality. We only want to create backend contracts and did the necesary configuration.
We activated BADI: BBP_DETERMINE_LOGSYS
Method CONTRACT_LOGSYS_DETERMINE.
We did not yet implement BADI:
BBP_CTR_BE_CREATE in SRM 5.0
In SAP R/3 Backend system (Version 46C) we see SAP is trying to create a contract via Idoc message Type: BLAORD.
In the trx BD87 in the backend we get status 51 :
Mesage number: 00 055
"Make an entry in all required fields"
In the segments of the Idoc however we do not see which field is missing!
How can we best analise this problem. Or maybe anyone can give us a a hint what is missing.
Thanks for any reply.
Aart

Hello RRK,
In ref. to your mentioning to change the backend configuration from WKK to MKK might not be as easy to do for organizations. As those configurations effect the overall creation of purchasing document types in R/3.
The Key issue is why the "Target Value" in the Header of the SRM GOA does not get transferred to the R/3 contract. That's why the issue is still there.
Were you guys able to figure out why that was missing? In the BLAORD IDoc the Target Value seems to not get transferred from SRM - its 0.00 if the IDoc is reviewed in WE19. This seems to be the problem.
Just wanted to know if you see the same issue in ur system.
Thanks.
Sunny.

How link customize IDOC message type with FM ?

Hi,
I have created new IDOC message type ZCOST and FM ZMASTERIDOC_CREATE_COST. (Outbound).
Please advise how link the message type and FM ? so everytime i am executing BD21 with message type ZCOST the program always calling FM ZMASTERIDOC_CREATE_COST to generate the IDOC.
Thank You and Best Regards
Fernand

HI,
You need to link Mssage type, IDOC type and the FM (also extension idoc type if exits) in TCODE: WE57 --> go to change mode
--> then new entries --> even you need to gove the direction inbound/outbound.
Also you need to create a outbound custom process code in WE41. and link the FM to the process code.
This process code shold be assigned to the partner profile in we20 in outbound parameters -> so you FM will be picked up qutomatically.
regards,
Nazeer
Edited by: N a z e e r on Jul 14, 2010 3:14 PM

Docu of Idoc message type CRMXIF_ORDER_SAVE_M02 for service request

Hi,
We are using the customer interaction center / service desk in CRM 7.0 and want to send service calls from other systems to our CRM service desk.
I've found that this should be possible via IDOC CRMXIF_ORDER_SAVE_M02.
Does someone has more documentation of this idoc message type (meaning of the fields, obligatory fields, ...) ?
Thank you,
Stefan

Hi,
Go to we19 t-code, there give messgae type CRMXIF_ORDER_SAVE_M and then execute.
Next screein beside EEIDC double click and give send and receiver port.
After that clcck CRMXIF_BUSTRANS popup will open. Fill required fields.
Then expand CRMXIF_BUSTRANSA do the same for all.
After that click start oubound processing.
For more information go to SPRO->CRM->CRM middleware and related componets->exchange data with external components->XIF adapters then click OVERVIEW documentation help. Then click CRMXIF_ORDER_SAVE.
You will get the information on outbond as well as inobound.
Regards
Srinu
Edited by: sreenivasulareddy eragamreddy on Jul 10, 2009 7:45 PM

Attribute extension generation to IDOC message type CRMXIF_IBASE_SAVE_M

Various attributes have been defined and assigned to a set type using tcode COMM_ATTRSET. The set type includes an entry in field CDB Table CDBD_ATTRVAL. The Create API Append has been checked when including in a transport which generated the API append structure for the set type. The set type has been assigned to a Category via tcode COMM_HIERARCHY.
We are planning to use IDOC message type CRMXIF_IBASE_SAVE_M for the legacy data migration. How do we include the new attributes?

You have to use TCode BDFG to generate a new Message Type . This will create a new Message type and a new Idoc type and will include the new Atributes.
we have used to create a new Message type for our new fields in ACTIVITY_H ( extended through EEWB )
Make sure , you refer to some OSS Note , which will tell you the steps to do so , As for first time user of BDFG its very tricky.

How can I display the IDOC message type descriptions

I've been asked to provide a listing of all the IDOC message types and it's associated description.
Does anyone know what table holds this information or a t-code that will allow me to create a file listing the message tpyes and descriptions?

Hi Timothy,
The correct table to get this information is from SAP table EDIMSGT. You can view/download the contents of this table via transaction SE16.
Hope this helps and please don't forget to reward points.
Cheers,
Sougata.

How to chang the idoc message type

Hi,
I want to change the idoc message type...because the idoc has the status 51...pls advice how to change
I have tried it from we81 .......but i cant open the msg type ...when i double click on it.
Regards,
Somenath

Hi,
This may help u
Steps To Create Custom IDOC
1.Create Segment Type (WE31)
Go to Transaction code WE31
Enter Segment type, click on Create
Give Description
Enter the Necessary Fields & Data Elements for those Fields.
Save the Changes.
2.Create Idoc Type (WE30)
Go to transaction code WE30
Enter the Object Name, select Basic type and click Create icon
Select the create new option and enter a description for your basic IDOC type and press enter
Select the IDOC Name and click Create icon
The system prompts us to enter a segment type and its attributes
Choose the appropriate values and press Enter
The system transfers the name of the segment type to the IDOC editor.
Follow these steps to add more number of segments to Parent or as Parent-child relation
Save it and go back
Go to Edit -> Set release
3.Create Message Type (WE81)
Go to transaction code WE81
Change the details from Display mode to Change modenAfter selection, the system will give this message u201CThe table is cross-client (see Help for further info)u201D. Press EnternClick New Entries to create new Message Type
Fill details
Save it and go back
4.Assign Idoc Type to Message Type (WE82)
Go to transaction code WE82
Change the details from Display mode to Change moden After selection, the system will give this message u201CThe table is cross-client (see Help for further info)u201D. Press Enter.
Click New Entries to create new Message Type.
Fill details
Save it and go back
Regards
Seshagiri

IDOC message type for "Site" in SAP Retail module?

Hi All,
We have the need to transfer master data (through master data change pointers) of Retail Sites within the SAP Retail module (transaction: WB01, WB02). Does anyone know if there's an IDOC message/type already associated with this? Thanks in advance for your help!
Cheers,
Matt

Hi,
please read SAP notes 892103 and 551035.
The correct IDOC type should be FIDCC1 / FIDCC2.
Best regards,
Andreas

IDOC message type or bapi to create CRM Product hierarchy

Similar Messages

Maybe you are looking for