Idoc Occurance help rquired.

Hi Experts
mine is a file to Idoc scenerio. The file I have has several equipmnet numbers . The occurance of the equipment in the source structure is 0:1 .
The target is an idoc structure, Idoc occurance is 0: 999999 and equipment occurance is 0.1 .
My requirement is , as different equipment numbers acn come in the source information, hw do i make , a single IDOC , at the target for each new equipment in the source???
Is my question clear, please help me out with this, and revrt back if you have any queries!!
Regards,
Arnab.

Hi Arnab,
as per my understanding, you have different equipment number under single equiment which is 0.1, and you need different IDOCs for different Equipment number, if this is the case, then you can map ur equipment number to the target IDOC using the node function "SPLITBYVALUE", and the property for this node function you have to choose "VALUECHANGE".
equipment no -
> SPLITBYVALUE -
> IDOC
(ValueChange)
which will create different IDOCs for each new equipment number.(If my assumption is not wrong)....
Regards
Venkat

Similar Messages

Hi guru's what is RSEOUT00 in ale idocs plz help me

hi guru's what is RSEOUT00 in ale idocs plz help me

Hi,
Check this link u will find ur answer
sap.ittoolbox.com/groups/technical-functional/sap-interfaces/idoc-status-remains-at-30-427371
sap.ittoolbox.com/groups/technical-functional/sap-wf/idoc-process-509096
www.erpgenie.com/sap/sapedi/operations.htm
Hope it is answered....
Regards,
sana.
reward if useful....

Adobe Fireworks cs6 is not opening .Saying internal eror occured help me please

Adobe Fireworks cs6 is not opening .Saying internal eror occured help me please :

For me the Fireworks stopped when it got to "Intializing Tab Windows", then a crashed and displayed "Could not complete your request. an error occurred" and would never load. Basically dead. I couldn't use it at all. My whole workfow came to a stand still.
BACKGROUND
Just before this happened, I was trying a new feature from within Dreamweaver. While inside Dreamweaver, I could double-click an image file and it opened in my Fireworks to be edited. I thought . . . Wow, this is really cool. I edited that image and closed it and continued on my work. Since then, that "Connection" between applications has become permanent. Fireworks "THINKS" it is still connected to Dreamweaver. Later Fireworks would NOT open/load at. I would always get the above error.
PARTIAL SOLUTION
BTW: I had to do this twice, because the first time, I missed a file somewhere.
I had to completely uninstall all ADOBE applications. I mean everything! I had CS3 & CS4 and Adobe Readers on my system.
Since I'm on the mac, I went through the "Application Support" both user and system and the "Preferences" for both user and system and deleted everything that had either "adobe" or "macromedia" in it. There was also a file in the "Launch Agent & Daemons".
I emptied the trash and did a power off restart. Then I reinstalled CS6. Now Fireworks at least loads and I can use it again, but it still isn't the same.
OBSERVATION
Fireworks and Dreamweaver are still "Connected". It won't save an existing PNG file as itself, it displays an error, "That file is open in another application", which is NOT true. I have to use the "Save As" option, and use the Finder to rename that file. I also notice an extra file labeled ex:0000056 which looks like the file I tried to save.
So at least I can use my Fireworks again although it is irritating. I don't know how to "CUT" the connection between applications. Uninstalling & reinstalling did NOT reset this, the only option left would be a backup, wipe and fresh install of my entire laptop. I just don't have time to do that right now. Hope that helps someone else.
Arlene

Error Posting IDOC: need help in understanding the following error

Hi ALL
Can you please, help me understand the following error encountered while the message was trying to post a IDOC.
where SAP_050 is the RFC destination created to post IDOCs
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_IDOC_RUNTIME</SAP:Code>
<SAP:P1>FM NLS_GET_LANGU_CP_TAB: Could not determine code page with SAP_050 Operation successfully executed FM NLS_GET_LANGU_CP_TAB</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error: FM NLS_GET_LANGU_CP_TAB: Could not determine code page with SAP_050 Operation successfully executed FM NLS_GET_LANGU_CP_TAB</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Your help is greatly appreciated.............Thank you!

Hi Patrick,
Check the authorizations assigned to the user which you used in the RFC destinations, If there is no enough authorizations then it is not possible to post the idocs.
Also Refer this Note 747322
Regards,
Prakash

Problem in importing idoc? help needed

Hi all,
I am trying the file-xi- idoc scenario.I have created logical system,port,pprofile, rfc destination( using XIAPPLUSER id and password) in respective
sap system.
In sap xi side, using transaction idx1, created rfc destination to sap system and created a port.
In i.repository, when i tried to import the idoc type, i am getting the error like 'unable to establish connection to R/3 system'. I have defined the receiver sap system in SLD asboth technical and as well as business sytem.
Any help???
Rgds,
SR.

Hello SR,
There could be various reasons ... one of them could be your definition in the Integration Repository. Check if you have given correct server address & Group name etc on the screen where you create NameSpace. Also check that the user has sufficient authorization in the SAP system from where you are importing the IDoc schema.
Let me know how it goes.
Regards,
Homiar.

Question w/ mapping header text fields from the ORDERS05 idoc - Need help!!

My mapping seems to be combining two header texts categories(IDs) and putting in into the XML target field. That's the first issue.
The 2nd issue is trying to figure out how to only use only a part of the tdline.
The idoc value is: <TDLINE>232828-0 06/25/2009 EDI Vendor Confirmed</TDLINE> .
I only want to use the first part: 232828-0 and ignore the rest(
06/25/2009 EDI Vendor Confirmed).
Would someone have 30 mins to help a newbie out.
I can send screen shots of the idoc coming into PI and the XML file going out as well as my mapping for the field.
Thanks,
Jeff
jschreiber@ballhort .com

Jeff,
I have sent a test email pl send me screenshots.
Issue 2: Did you try to use standard function for texts i.e "substring". Open the mapping in editing mode and all the way down you can see "Function" from where you can choose std functions.
-Sid

HRMD_A IDoc Serialization Help

Hi,
I have a client that wants to activate IDoc serialization for HRMD_A. They have a global system that sends HR master data to multiple regional systems, MDM and SRM.
The requirement is to serialize the IDocs for all regional systems, but not for MDM or SRM.
My understanding is that we would need to activate both outbound and inbound serialization through SALE->Modelling and Implementing Business Processes->Configure Predefined ALE Business Processes->Human Resources->Master Data Distribution->Serialize HR Master Data.
We would activate outbound in the global sending system, and inbound in each regional target system, but not in MDM or SRM.
By activating serialization, will it activate for HRMD_A only, or for HRMDA_ABA as well?
We would then need to make sure that the serialization counters are all initialized in both source and target systems. We can do this with transactions RE_RHALE_HRMDRGOUT and RE_RHALE_HRMDRGIN.
Please correct me if any of the above is incorrect?
Once serialization is activated, how will this effect the system? If for example an IDoc is sent with 100 objects, and one fails, then what status will the IDoc go into? Will all other objects process correctly? How would the error object affect subsequent IDocs?
What steps need to be taken in order to resolve the following potential IDoc errors:
- Change for person xxxxxxxx extends too far into past
Delete IDoc? What to do with counters?
- Object 01 ,z ,xxxxxxxx does not exist: infotype 1001 cannot be created.
Resend missing objects with PFAL and then reprocess IDoc?
- Relationship starting from 01 y xxxxxxxx impossible u2013 01 w zzzzzzzz does not exist/is not active.
Resend missing objects with PFAL and then reprocess IDoc?
- Personnel number xxxxxxxx is locked
Will this sort itself out, or do we need to manually reprocess the Idoc?
- Payroll area yy is locked for master data maintenance.
Reprocess the IDoc after payroll areas is unlocked?
Thanks very much for your help
Edited by: David Bann on Sep 22, 2011 4:52 PM

Hi,
If change pointers are to be written for custom fields then the change document flag at the domain level should be checked for that field. Then maintain an entry for this field in transaction BD52. Object name will be the same as the original fields. Changes to custom fields will be only picked if the change document for such fields is maintained in table BDCP.
Try now!
Reddy

Creating Inbound IDoc - IDOC_INBOUND_SINGLE Help needed

Hi all,
I am using IDOC_INBOUND_SINGLE to create inbound IDoc. Its creating the IDoc and processing successfully.
But this FM only returns IDoc number and not the processing errors if there are any. Any way to get processing errors also?
Your help would be highly appreciated.
Thanks,
Sagar

Hi
I am not sure
Pls check this function module 'IDOC_READ_COMPLETELY'
Regards
Madhan

Exception occurred - help me please

Hi,
I am compiling some applets from Eclipse, I arrived to my last applet and I tested it in another PC with a MSVM ver 1.1.4 after sign it with my security certificate. These applets work with Sun VM but when I open just my last applet with the version 1.1.4 de MS the follow message appears:
Exception occurred during event dispatching:
java.lang.NullPointerException
 at com/ms/awt/WToolkit.checkScrImage
 at com/ms/awt/WToolkit.checkImage
 at java/awt/Component.checkImage
 at java/awt/ImageMediaEntry.getStatus
 at java/awt/MediaTracker.statusAll
 at java/awt/MediaTracker.waitForAll
 at java/awt/MediaTracker.waitForAll
 at ImageEditor/bo.<init>
 at ImageEditor/cw.L
 at ImageEditor/cw.m
 at ImageEditor/bh.a
 at ImageEditor/bh.mouseReleased
 at java/awt/Component.processMouseEvent
 at java/awt/Component.processEvent
 at java/awt/Component.dispatchEventImpl
 at java/awt/Component.dispatchEvent
 at com/ms/awt/ZComponentPeer.processEvent
 at java/awt/Component.dispatchEventImpl
 at java/awt/Container.dispatchEventImpl
 at java/awt/Component.dispatchEvent
 at java/awt/EventDispatchThread.run
And the error comes when I try to pass to my 2nd window applet.
Anybody could give me an idea why it is happening please?
Thank you
Panchitopro

Dear, turingcomplete :
Thanks for your help, I was changed the thread in my code, my problem was moved.
thank you again
sincerely
yours Urey

Need IDoc Related Help

Hi Folks,
I need an urgent help on IDOC issue for COR3 Transaction.
We have one legacy system from where data is coming for a particular Process Order. Now in Process Order display transaction COR3 when we go to Good Receipt Tab, and double click on batch, it displays the batch characteristics. Now Batch Detail's classification tab there are characteritics values. These characteristic values are suppose to store multiple values. We have changed in configuration.
Now when I execute the IDOC it stores only current value. It is kind of that it overwrites the previous value and keeps the new value in it's place and i want to retain all the values from the very beginning to the end. Please help me with the same.
Siddarth.

Try a hard reset.Disconnect all external devices first.
1-remove power cord and battery
2-press power button for 30 seconds
3-reinstall only power cord for first startup.
4-power on
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

IDOC Configuration Help

hello,
i have just started learning concepts of IDOC and ALE.
And found some docuemnts for the same.
WE have 2 clients in our dev server. 700 & 600.
I want to test idoc concepts on these clients of same servers.
Firstly i checked logical systems on client 700.
Have a look.
here 600 client is not shown but it exists in our system.
Moreover , 400 client is shown..but it does not exists in our system.
Here is the view of table T000
Please tell me...what this is all about.
Whether i need to create a new logical system or assign client to existing logical system
or nothing.In order to run idoc's?

Hi Abhishek,
Refer the steps below and let me know if it helped.
ALE configuration normally involves the seven basic steps which are:
1. Creating users for ALE Transfer
2. Creating Logical system and assign the client
3. Creating the RFC
4. Configuring Distribution Model
5. Configuring and checking the port
6. Configuring and checking the partner profile
7. Creating the message type
The steps to configure and use it is mentioned below:
Notes: 105 is Sender and 800 Receiver System in the example below:
1. Create Users for ALE transfer in both receiving and sending client/systems.
Create users in both the client/systems giving the same user name and proper authorizations. We need to use these user ids to logon through the remote connection and perform the IDOC transfers.
2. Creating Logical Systems
o       Create logical systems for both sending and receiving systems in both systems.
o       Login to Client 105 (SENDER)
o       Go to T. Code SALE
o       Expand Sending and Receiving Systems
o       Expand Logical Systems
o       Click on Define Logical System
o       Click on New Entries
o       Create Logical Systems with naming convention 'system name'+'CLNT'+client no . For example for sending system ex: SSPCLNT105
o       Create Logical Systems with naming convention 'system name'+'CLNT'+client no ex: example for receiving system ex SEDCLNT800
o       Save and come back
o       Click on Assign client 105 to Logical system SSPCLNT105
o       Now, logon to client 800, repeat the same above process to create logical systems SEDCLNT800 and SSPCLNT105
o       Save and come back
o       Click on Assign client 800 to Logical system SEDCLNT800
3. Creating the RFCs
o       In client 105, Go to T. Code SM59
o       Expand R/3 Connections
o       Enter RFC Name as SSPCLNT105 (give this name same as that of logical name created in step1 so that the ports are automatically created)
o       Connection Type as 3
o       Language as EN
o       Give the logon details for client 800 (usually, we create a new user with proper authorizations for this ALE data transfer)
o       Click on Remote logon button to test the RFC
o       Now, go to client 800 and repeat the same process to create the RFC connection to client 105, giving logon credentials to client 105
4. Creating Customer Distribution Model
(we usually create this in the original system(sending system) and then distribute it to other systems. The actual creation of the model requests that you mention a technical name for the model (unique identifier in the systems landscape), a sender system, a receiver system and message types to exchange between those systems.)
o In Client 105, Go to T. Code BD64
o       Click on change and Create model view button
o       Enter the short text and Technical name as ZSSP_SED
o       Select the model and click on Add Message Type Button,
o       Give the Sender as SSPCLNT105, Receiver as SEDCLNT800,
o       Give Message type as required, Ex: 'HRMD_A' for HR Module.(usually Message types given by SAP are available for a particular module, see this using tcode WE81, if not create a message type first)
o       Note: If we are performing this data transfer task for all modules at a Customer site, then we will need to use the appropriate message type and create a new Distribution model.
o       Select the above model view and click on Environment -> Generate Partner Profiles
o       Select Transfer IDOC Immediately and Trigger Immediately radio buttonsF
o       Click on Execute
o       You should get a list in green color which means it executed successfully.
o       Back to main screen, select the model view
o       Click Edit->Model view->Distribute
o       Click on continue
o       You should get a list saying model view is distributed successfully.
5. Checking the Port
o       In client 105, Go to T. Code WE21
o       Expand Transactional RFC
o       Find the port from the list which is created using BD64 for SEDCLNT800 (Receiving system) RFC Destination.
6. Checking the Partner Profiles.
o       In client 105, Go to T. Code WE20
o       Expand Partner Type LS
o       Select the Partner profile SEDCLNT800
o       Double click on Message Type (For Ex: In HR Module, HRMD_A in Outbound parameters.)
o       Check Receiver Port is assigned correctly
o       Check the Basic type as your Basic IDOC object.
o       In the sending system, select the option to transfer IDOCs immediately.
o       By default, in the receiving system IDOCS are bunched together and received.
7. Creating the Message Type
o       Message type defines the 'meaning' of data. It is just a logical entity that gets connected to the Idoc type (in tcode we82) or gets connected to the distribution model (in tcode BD64)
o       If necessary create a new message type. In client 105, go to tcode we81.
o       Click on change, continue
o       Click on New Entries button
o      Give message type in customer namespace Z* and description
o     Save and back
This should be helpful for ALE configurations.
Thanks,
Anupam

Sending Project as an idoc pls help!!

Hi ,
I am working on Project Systems Module . Can anyone please tell me how to send a project from one R/3 SAP system to another ? Is there any standard program to send an project as an idoc ?? What is the procedure to send the project to antoher system.
Thank you

Hi Alisha,
Instead of using idoc use BAPI_PROJECT_MAINTAIN.
However if u really wanna use Idoc then there is a message type called project however in the distribution model you will have to add bapi, object type and method.
This message type only helps you to transfer project data
like project definition and wbs elements ,in order to transfer the entire master data you will have to either create a custom Idoc or enhance the existing one.
Hope this helps you.
Thanks & Regards,
Vanita

File1-RFC-File2-IDOC design help

Hi,
Here is the business requirement. Please help with design options.
There are two files(Business Partner.XML & Vendor.xml) on FTP server.
Pick up BP.XML file, call RFC(BAPI) to post the data in R/3(ECC).
If BAPI return code is success, then pick up 2nd file(Vendor.xml) and post corresponding record(vendor#) as the IDOC(CREMAS) in R/3.
If BAPI retrun code is failed, then do not post the IDOC(corresponding record in 2nd file).
Both files has vendor number as the key field.
File1 & File2 may have upto 10 records in each file.
Thanks in advance

Hi Mallik,
You can have both the files processed at the same time using two different interfaces.
1. File ->RFC and
2. File ->IDOC.
Now for the IDOC in the receiver system, partner profile make sure that for the message type CREMAS, the IDOC configuration is to be collected..
In the first scenario RFC, make sure that if the business partner posting have been done successfully then submit the program RBDMON00(t-code is BD87) with the IDOC type and IDOCs having the status 64.
Cheers
JK

Generate mutiple datarecord if source segment of idoc occur multiple times

Hi all,
        I am doing an idoc to file scenario .In that an idoc segment E!FSEG is occuring five times totally and 3 time with two fields "eibeln"and sgtxt.I have to generate data record 3 times when the field eibelen and sgtxt both are persent in the segment.
                        I mapped my target datarecord with segment E!FSEG with if conditon that if both field r persent then map E!FSEG wtih data record but data record is getting created 5 times instead of 3.Plz guide me as its very urgent
Regards
Neha

Neha,
Try the below option and let us know.
eibeln[change context to one level upper] --->Exist
                                                                           > AND-> Createif Target
sgtxt[change context to one level upper] -
>Exist
Best regards,
raj.

"A Serious Error has Occurred", HELP

So I have a project with a Monday deadline. I'm using Adobe Premiere Pro CC 2014. Just got to picture lock with the director and I was doing some minor tweaks to the audio. I got the dreaded "A serious error has occurred", restarted permiere tried to load the recovered file, and it crashes with the same error. "No big deal" I think, and then I tried to open the original file, and it does the same thing. Once all the media is connected if I try to move the scroll bar next to my time line the error pops up.
So I'm starting to worry and freak out. I cannot lose this project file.
Tech Specs on the machine:
MacBook Pro (15-inch, Mid 2010)
2.8 GHz Intel Core i7
8 GB 1067 MHz DDR3
NVIDIA GeForce GT 330M 512 MB
Running Yosemite 10.10.1
Adobe Premiere Pro CC 2014 8.0.0 (169) Build

Update:
So after resetting permissions for Adobe across the board on my computer. Then uninstalling and Premiere with the adobe cleaning tool, then reinstalling the latest version via CC, the issue still persisted.
Every time I tried to zoom out of my timeline it would crash. All my media would connect though, so I knew it had to be some sort of minor bug. In the meantime since we were already at picture lock I was able to save an XML to give to the colorist, and export my audio tracks separately (vo and music) as ACC files. So at least I could tweak the mix that way.
After all that, this morning, I had an epiphany moment. PP only started crashing when I had my audio tracks expanded so I could see the waveform and set points to rubber band the volume. So I collapsed the audio tracks, and bam! I was able to zoom out without crashing. So there must be something up with a bug in the timeline code.
Is there a fast command to collapse all tracks in the timeline? Audio and Video?

Idoc Occurance help rquired.

Similar Messages

Maybe you are looking for