IDOC Partner Profile for Sales Orders
What kind of Partner Profile should i create to receive Sales Orders by IDOC from external non-SAP system by RFC?
I created Partner Profile type KU (Customer) with name AAA001.
AAA001 is customer, created in VD01.
Added to inbound parameters:
- Message type - ORDERS
- Process code - ORDE
- Trigger immediately
Testing in WE19:
E1EDK01-RECIPNT_NO = AAA001
E1EDKA1-PARVW = AG, E1EDKA1-PARTN = AAA001
Sales Order is not created.
IDOC has following status:
EDI: Partner profile not available
Message no. E0 332
Diagnosis
A partner profile could not be found with the following key:
/0000000000/ /
This involves the key fields of the table EDPP1:
-PARNUM partner number
-PARTYP partner type
Procedure
Please check the EDI partner profiles.
Edited by: S S on Dec 21, 2008 4:51 PM
Similar Messages
-
What is the IDOC Basic Type for sales order creation
Hi Experts,
Can anyone tell me Idoc Basic type for sales order creation.
Thanks
PrashantHi,
The basic types for creating the order are:
1.Orders01
2.Orders02
3.Orders03
4.Orders04
5.Orders05.
The basic type for SIS order is:
SISCSO01.
Regards,
Krishna. -
CRMXIF_ORDER_SAVE_M01-IDoc Sample data for sales order in CRM.
Hi Friends ,
I am usig the IDoc CRMXIF_ORDER_SAVE_M01,I could able to save the Order in CRM,but the values of partners, Sales area,PO Category,Customer Po details and the material detail are not available in the created Sales order,though I am pasing them.
Are there any mandatory fields/qualifiers I am missing
E101CRMXIF_ACTIVITY - for the PO Category
E101CRMXIF_PARTNER - for the Partners
E101CRMXIF_ORGMAN - for the Sales Area
E101CRMXIF_SALES - for the Customer Po details
E101CRMXIF_BUSTRANS_ITEM - for the Material details
Can any one share a sample IDoc segment fields with the data.
I greately appreciate your early help.
Thanks
VJHi Vijay,
Here what I would do to analyse this further. Please try to create the saem order directly in CRM with the
same masterdata and test the result. There might be a partner procredure or accesses which cna interfere.
If this is not helpful please let me know the error message ID and number you are getting in CRM as well.
Best regards
Christophe -
How to restrict status profile for sales order.
Dear Friends,
Pl suggest me for follwoing scenario
► As per business process for tender/ institutional sales and exports, the order is complete once the complete delivery and invoicing for the same has been performed.
► It was also observed that a sales order may be modified (material, quantity, price etc) even after complete invoicing of the same has been performed in SAP.
The requirement is Possibility to enable a control to restrict any amendments to the sales order after complete delivery and invoicing will be explored as per business requirements.
Is there any solution above scenario without writing any code.
Regards,
Atul
Edited by: atul thakur on Oct 28, 2009 5:09 AMMr Atul,
My understanding is, you don't want your user to be able to change the pricing and order quantity once the order is complete, i.e Delivered and Shipped.
The status profile will not help you in the above scenario, Price/Quantity changes will not come up as Business transactions that can be controlled at Status profile.
Standard SAP restricts the price changes to a completed item of the order, so no need to worry about this.
But order quantity can be increased any time.
So to restrict the user to increase the order quantity you need to use the User-Exits that SAP provided.
Use the MV45AFZB user-exit program and form FORM userexit_check_vbap to code this.
Hope this helps you.
Regards,
Aj. -
Status profiles for sales order
Dear all:
I use status profiles to do sales order approve(BS02)
who can tell me which business transaction can settle Sales Order can or not make to MD04?
the standard business transcation:
Acct. assignment order/project
Activate final billing doc.
Actual activity allocation
Actual overhead (periodic)
Actual settlement
Automat. WIP/results analysis
Change configuration data
Complete
Confirm order
Create billing document
Create changeable copy
Create delivery
Create inquiry
Thanks a lot .hi,Imran and rohit rathi
thank you very much for you help,
maybe I have't depict the problem,
I use user status profiles to do sales order approve, i have defined a status profiles and assigned it to sales document type , i have defined two statuses A00 and B00 in the status profiles .
I hope if the sales order in status A00,it'can make to MD04,when the sales order approved to status B00,It can make to MD04.
but I don't know which business transaction shoud I choose when defining the profiles' status A00 by t-code BS02.
thanks and Best wishes.
zeng
Edited by: zeng zeng on May 31, 2008 11:37 AM -
How to maintain the settlement profile for sales orders types
Hi experts,
When i try to create a Sales order it gives an error as maintain settlement profile where can i maintain this settings...plz help me in this
Thanks,
Edited by: pandu123 on May 13, 2011 2:17 PMfollow this link for get hints
Error in Rework order settlement
Reg
NAr -
Settlement Profile for Sales Order make to Order Production.
Hi
This is the first time I am working for CO and I do have a very basic question:
When our settlement process is complete (production order and sales order both settled to COPA), there is a balance remaining on the sales order cost report which is equal to the manufacturing variance.
It seems that the manufacturing variance is posting from the production order to the sales order, but is not being assigned to the PSEG and flowing to COPA.
I do have all the screen shot and logical flow charts and I could e-mail to you for a quick glance.
ThanksI will take a look at your documentation - my email is on my profile business card.
althea -
Rounding Profile for Sales Order Quantity
Hi ALl,
we want to set up sales order such that order can be logged in for min. qty of 100 and further in multiples of 50 . So we created a rounding profile in PP->MRP->planning->lot size calculation. But the profile created here is not available for selection in material master sales org. 1 view.
Where do we need to maintaion this rounding profile in order to be able to select in sales 1 view of material master.
Prashantfirstly, setup the field Rounding permitted of item category you used in S/O.
secondly, setup the field RoundingProfile in material master data.
thirdly, check the value in transaction OWD1, Maintain Control Profiles for Quantity Optimizng, Assign Control Profiles. -
Customer partner block for Sales order message error
HI Friends,
I am trying to get error message while creating Sales order, for a Partner (ZA) who is blocked in XD05.
I did blocking reasons and assigned it to Sales order type, but while creating sales order i am getting pop up of all ZA partners assigned in Customer master, but while selecting one of blocked customer system doesn't gives any message and allowes me to save the order.
How to get any message or error please suggest.
Regards,
Anil AgrawalHi Friends,
If i am doing same customisation for (SH) Ship tp party it is working but if for any ZA partner it is not can anyone suggest how to do it for ZA also.
Regards,
Anil Agrawal -
Status Profile for Sales Order
Can anyone send step by step process for configuring Status Profile?
Dear Anupa
Being a senior member, dont you aware of the forum rules. I am sorry to say that the informations you exchanged personally is definitely condemnable and we as a Moderator can ask the concerned panel to delete all your points. But since I come across as a first instance, I dont want to do this.
Please try to maintain the forum rules and also advise newbies to go in line with the guidelines. Dont spoon feed them.
thanks
G. Lakshmipathi -
Change of partner analyse in sales orders
Hello,
I changed the partner analyse for sales orders and added a new mandatory partnerrole.
In new documents the partner analyse works fine, but in the existed sales documents I cant´t see, that a mandotory role is missing.
How can I see that this role is missing in the exsting documents???
Thanks for info
NicoleYou can create a custom report but there is no standard way to do this.
When a document is created in SAP, it is a "snapshot" of that configuration, master data, and information as it exists when the document is created. On the SD side there are a few things you can influence, for example, SAP contains some standard tools for mass updating of pricing information. Most of the document exists in its unchanged state though.
You *may* be able to use VA05 and do this (although I doubt it, no system in front of me right now). Other than that transaction or a custom report there really aren't a lot of options.
If you are familiar enough with the tables, you can do a "quick view" or an ABAP Query to get the info. However the SAP partner table is recursive so to avoid getting lots and lots of duplicates you will either have to add some code to a full query, or do offline manipulation of the data.
If you're looking for soild SAP experience to help through some of these hurdles, please contact me.
Bill Wood - President
R3Now Consulting
http://www.r3now.com SAP thought leadership!
Platinum SAP Solutions
(704) 905 - 5175
http://www.linkedin.com/in/billwood -
How to include a new Z Partner Function in Sales order header drop down lis
Hello SAP experts,
We have come up with a new requirement to include a custom Partner Function-ZI in dropdown of SO header-Partners field.
Current scenario- Presently we are maintaining this partner function ( Say ZI- Institute ) in customer master data-Sales area tab.There could be more than one partners under this PF in master data. While entering sales Order, all partners associated are displayed in Header- partners tab, where only SP, SH, BP, PY partner functions are displayed.
Requirement- 1. Is to provide Drop down of this ZI-Institute partner function (which I did not find presently) in SO header-partners field and user should be able to provide one of partner function as available in Customer master ( as there are more than one partners that can be set in Customer master data but user need to be able to provide ONE of this ZI partner fucntion in DROPDOWN of PF tab in SO header ).
2. In addition, How can I link this new partner function in related sales reports against that particulat order and invoice?
Kindly suggest your valuable inputs as what should be the procedure to get this.
Many thanks in advance.Hi,
Go to partner determination by VOPA
OR
IMG >> SD >> Basic function >> Set up partner functions >> set up partner function for sales document header
click on partner function and Maintain partner function ZI and back
Then select your existing partner determination procedure (Standard is TA) and click on PARTNER FUNCTIONS IN PROCEDURE and add partner function. and make it mandatory so even user forget to mention then at the time of saving system can remind user
Then double click on PARTNER DETERMINATION PROCEDURE ASSIGNMENT
Assign partner procedure to sales document
Now when you creating sales order go to header partner tab and enter you institute partner number
For sales order and invoice report
Execute this report by selecting partner function ZI in VA05N and VF05 respectively
kapil -
Partner function for sales contract
Hi
I have to extract Sales related data from SAP R/3 to BW.
Facing issue if someone just changes partner function for Sales contract as they are not captured in any of the standard extractors.
If there is change in partner function for Sales order then it gets captured in 11 vascl but if its for contract then it doesnt get capture.
Any solution ?
Regards,
monikaHi ! Ivy
I guess there is a option.
Try this out. Use the menu path IMG> Sales & Distribution> Sales> Lists> Set updating of partner index
In the resulting screen, click on 'New Entries' make entries 0 - for sales orders and 4 - for contracts as transaction group. Under the column 'partner function' ener the partner function for which you want the report and save your entries.
Now when you go for executing your report, click on the push button 'Partner functions' ( Say in VA05) , you will have the option for selecting the new partner functions , select and execute your report.
Provide your feedback.
Regards,
PATHIK -
Urgent: Creating ALE IDOC for SALES ORDER
hi
please tell me <b>step by step procedure to create ALE IDOC for SALES ORDER?</b>
reward for sure
regards
ravishHi,
ALE IDOC
Sending System(Outbound ALE Process)
Tcode SALE ? for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 ? Create Model View
Tcode BD82 ? Generate partner Profiles & Create Ports
Tcode BD64 ? Distribute the Model view
Message Type MATMAS
Tcode BD10 ? Send Material Data
Tcode WE05 ? Idoc List for watching any Errors
Receiving System(Inbound ALE )
Tcode SALE ? for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 ? Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 ? Idoc List for inbound status codes
ALE IDOC Steps
Sending System(Outbound ALE Process)
Tcode SALE ?3 for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 !V Create Model View
Tcode BD82 !V Generate partner Profiles & Create Ports
Tcode BD64 !V Distribute the Model view
This is Receiving system Settings
Receiving System(Inbound ALE )
Tcode SALE ?3 for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 !V Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 !V Idoc List for inbound status codes
Message Type MATMAS
Tcode BD10 !V Send Material Data
Tcode WE05 !V Idoc List for watching any Errors
1)a Goto Tcode SALE
Click on Sending & Receiving Systems-->Select Logical Systems
Here Define Logical Systems---> Click on Execute Button
go for new entries
1) System Name : ERP000
Description : Sending System
2) System Name : ERP800
Description : Receiving System
press Enter & Save
it will ask Request
if you want new request create new Request orpress continue for transfering the objects
B) goto Tcode SALE
Select Assign Client to Logical Systems-->Execute
000--> Double click on this
Give the following Information
Client : ERP 000
City :
Logical System
Currency
Client role
Save this Data
Step 2) For RFC Creation
Goto Tcode SM59-->Select R/3 Connects
Click on Create Button
RFC Destination Name should be same as partner's logical system name and case sensitive to create the ports automatically while generating the partner profiles
give the information for required fields
RFC Destination : ERP800
Connection type: 3
Description
Target Host : ERP000
System No:000
lan : EN
Client : 800
User : Login User Name
Password:
save this & Test it & RemortLogin
3)
Goto Tcode BD64 -- click on Change mode button
click on create moduleview
short text : xxxxxxxxxxxxxx
Technical Neme : MODEL_ALV
save this & Press ok
select your just created modelview Name :'MODEL_ALV'.
goto add message type
Model Name : MODEL_ALV
sender : ERP000
Receiver : ERP800
Message type :MATMAS
save & Press Enter
4) Goto Tcode BD82
Give Model View : MODEL_ALV
Partner system : ERP800
execute this by press F8 Button
it will gives you sending system port No :A000000015(Like)
5) Goto Tcode BD64
seelct the modelview
goto >edit>modelview-->distribute
press ok & Press enter
6)goto Tcode : BD10 for Material sending
Material : mat_001
Message Type : MATMAS
Logical System : ERP800
and Execute
7)goto Tcode : BD11 for Material Receiving
Material : mat_001
Message Type : MATMAS
and Execute --> 1 request idoc created for message type Matmas
press enter
Here Master Idoc set for Messge type MATMAS-->press Enter
1 Communication Idoc generated for Message Type
this is your IDOC
Change Pointers
I know how to change the description of a material using ALE Change Pointers.
I will give the following few steps
1) Tcode BD61---> check the change pointers activated check box
save and goback.
2) Tcode BD50---> check the MATMAS check box save and comeback.
3) Tcode BD51---> goto IDOC_INPUT_MATMAS01 select the checkbox save and comeback.
4) Tcode BD52---> give message type : matmas press ok button.
select all what ever you want and delete remaining fields.
save & come back.
5) 5) go to Tcode MM02 select one material and try to change the description and save it
it will effects the target systems material desciption will also changes
6) goto Tcode SE38 give program Name is : RBDMIDOC and Execute
give Message type : MATMAS and Executte
ALE/IDOC Status Codes/Messages
01 Error --> Idoc Added
30 Error --> Idoc ready for dispatch(ALE Service)
then goto SE38 --> Execute the Program RBDMIDOC
29 Error --> ALE Service Layer
then goto SE38 --> Execute the Program RSEOUT00
03 Error --> Data Passed to Port ok
then goto SE38 --> Execute the Program RBDMOIND
12 Error --> Dispatch ok
Inbound Status Codes
50 Error --> It will go for ALE Service Layer
56 Error --> Idoc with Errors added
51 Error --> Application Document not posted
65 Error --> Error in ALE Service Layer
for 51 or 56 Errors do the following steps
goto WE19 > give the IDOC Number and Execute>
Press on Inbound function Module
for 65 Error --> goto SE38 --> Execute the Program RBDAPP01 then your getting 51 Error
Regards -
Partner profile for INBOUND IDOC
Dear experts,
Need your help to define partner profile for inbound idoc to R/3 system. There is a third party (Non SAP) based application from which idocs need to be sent to the R/3 system. There is no need to send an outbound idoc from the R/3 system. Can some one please suggest what are the steps to be taken to b configure the partner profile in the R/3 system for the inbound idoc?
Thanks,
PriyankaHi
This is not the right location to post this question.
You got to post this query in Data transfers section of SDN ABAP Development forums
Now regarding your question,
You need to create a Logical System with the help of the transaction SALE.
Assign the created LS to the client with the help of same transaction
Go to WE20 and create the partner with the same Logical System name
Now..as you are recieving the Inbound Idoc from external Non-SAP System, you need to maintain the message type in the Inbound Parameters by clicking on ADD Icon over there.
Before doing the above step, you got to create the connection between SAP and Non-SAP System.
Use transaction SM59 to do this. Type of connection would be R/3 I guess
Thanks
Hope it helps.
Maybe you are looking for
-
Guys, a have one big problem..My customer brought me a macbook with windows 7 installed to do a format and reinstallation, but she is no longer the OSX Lion, and do not know how to install the sound drivers, "touchpad", among other drivers, how to so
-
Just purchased a Moto L7c with Verizon, and am very disappointed it will not sync with my Macbook Pro. Does anyone think Apple will do what it takes to make syncing with this phone possible anytime soon?
-
ColdFusion Archives option is missing
Hi, I have a CF7 Standard installed on Windows 2003 Server with IIS 5.1. I noticed that under Packaging and Deployment menu in Coldfusion Administrator, the only option listed is J2EE archives. ColdFusion Archives option is missing. Any idea as why C
-
Cannot find Photo Stream on Mac / No iLifeAssetManagement folder
I want to access my Photo Stream without iPhoto. Supposedly, these photos are located in the folder found at: ~Library/Application Support/iLifeAssetManagement/assets/sub. However, I do not have an iLifeAssetManagement folder -- and it is *not* becau
-
Publish to PDF options - Can they be modified?
I use Captivate 5.5, and often use the publish to PDF option. My question is "Are there any publish to PDF options that I can manipulate to cause the resulting PDF file to open in the manner that I need? For instance, if I wanted the PDF to open in