IDOC send step not running with exception in BPM?

Hello,
hope this is a simple question, but we are running with a problem here which is not answered well in SAP help or sdn. Possibly I didn´t find the right blog.
Situation:
We created a BPM with a send step (IDOC receiver) in a block (after a receive step starting the BPM) (That´s simple so far!).
The send step (async IDOC) in the block is connected in its attributes in field "system error" to an exception branch defined in the same block.
In this except.branch the process should send back to sender system a message via RFC and the last step in this exception branch is to interrupt the proces.
But now we tried to do a test. In this test we modified the receiver address of the send step (IDOC reciver) so that the receiver could not be reached, which results in a system error in SXMB_MONI (Service unavailable).
But this doesn´t work. The BPM starts the send step to the unavailable receiver, SXMB_MONI shows a system error step, but then the BPM continues with the next step after the block without starting the exception branch.
Any idea why the exception branch is not called?
Best regards
Dirk

Hello again,
we are one step further now.
We did the same with an RFC instead of the IDOC send step.
Same result:
The service is not reachable. So the step results in an system error.
But as we could see in the monitoring SXMB_MONI the block with the exception and this send step (RFC) is passed before the step gives back this error!
So it looks like connection problems do not trigger an exception?
Any help is welcome!
Best regards
Dirk

Similar Messages

HT1925 After failed update of itunes yesterday, now will not run with error message "MSVCR80.dll can't be found, APSDaemon.exe not running". Windows 7.

After failed update of itunes yesterday, now will not run with error message "MSVCR80.dll not found" APSDaemon.exe will not run. itunes will not now run.

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

HTMLDB_MAIL.SEND does not work with 11g

Hi Guys,
I have a simple application that uses HTMLDB_MAIL.SEND. I am running APEX 3.0 against an 11g database. When run against a 10g DB all is good. But with 11g I get
ORA-24247: network access denied by access control list (ACL)
I looked up the error which recommends altering ACL stuff, which I know nothing about. Is there a simple way to get rid of this error.
O.

Hi,
I have the same problem as you.
Colud you please explain me how did you resolve it.
Thanks
HTMLDB_MAIL.SEND does not work with 11g

Add does not run with sql server 2008

Hi all,
My add on in the development environment does not run with SQL SERVER 2008. It ran well with SQL Server 2005 and sap b1 2207 B.
On executing the project file system throws an error "YOU ARE NOT CONNECTED TO THE COMPANY"
we are trying this scenario on a test machine where SAP B1 2007B with temporary license for one month and SQL server 2008
is installed.
Help needed.
Thanking you
Pradnya

Hi Use this
Dim i as integer
i=oCompany.Connect()
if i<> 0 Then
msgbox(ocompany.GetLastErrorDescription ())
end if
the you will get the error description also use try catch wherever necessary
Alternatively you can use
Dim SboGuiApi As SAPbouiCOM.SboGuiApi
Dim sConnectionString As String
Set SboGuiApi = New SAPbouiCOM.SboGuiApi
sConnectionString = Command
SboGuiApi.Connect sConnectionString
Set SBO_Application = SboGuiApi.GetApplication()
Set ocompany = New SAPbobsCOM.Company 'initialate DI company object
ocompany = SBO_Application.Company.GetDICompany
HTH,
Atul

Task does not run with transaction currency

Dear All,
When i am executing IU AR/AP elimination, I am getting error " Task does not run with transaction currency ("per TC" option reset) "
Message no. UCF5104
Diagnosis
The present task is configured so that no values are analyzed in transaction currency. However, the option "per transaction currency" is selected in the method definition. This only makes sense if you also want to analyze the values in transaction currency.
System response
The task is being executed without the option "per transaction currency".
Please advise me how to resolve the issue.
Regards,
Malani

Dear Dan,
I would like to know what will be the effect if we remove o-Per Currency option in Method.
I would like to know, in the document also in properties tab - in Key figures - Check box - Transaction Currency. If i select the warning message not coming. So kindly let me know what exactly check box -Transaction currency is used in Document type and whether it is interlinked with Method.
Thanks
Malani

My office professional will not run with windows 8.1

my office professional will not run with windows 8.1 It ran fine on 7 and 8 but not 8.1

Microsoft Windows 8.1 officially supports all currently supported Microsoft Office versions including Office 2013 / 2010 / 2007 / 2003 , and may be even earlier versions unofficially. I use Microsoft Office Professional Plus on my Windows 8.1 and it runs fine with no issues. Could you try what has already been suggested by others including Big_Dave and reinstall Microsoft Office with complete reboot/restart between uninstall/new installation <restart, not shut down and start over>. If this doesn't work, please post again if installation went fine, what exactly is the error code (if any), what is the problem exactly, any screenshots ?

Can not run with Lingos

can not run with Lingos!!!!

Sorry, but my mind-reading abilities are malfunctioning. What is it that cannot run with whatever? What happens when you try? Any error messages that are not state secrets?

B2B scenario with IDocs, sender system not in SLD

Hello all
When sending a purchase order IDoc (ORDERS05) out of SAP ECC 6.0 I get the following error in SM58:
No service for system SAPPEE, client 200 in Integr ation Directory
Message no. SR053
Until now I did not register the SAP ECC 6.0 system in the SLD. Is this absolutely mandatory?
The RFC-Destinations work like a charm, the user (type C) and authorizations (for now SAP_ALL) should be ok (same settings in XI and SAP ECC system).
In the integration directory I defined a partner "IDOC_SENDER" with the following identifiers:
Agency = http://sap.com/xi/XI
Scheme = XIParty
Name = IDOC_SENDER
Agency = PEE_200 (SID with client from customers system)
Scheme = ALE#LI#LF
Name = 0000601140 (this is the vendor id from customers point of view)
Agency = AEE_200 (SID with client from vendors system)
Scheme = ALE#KU
Name = 0000001011 (this is the customer id from vendors point of view)
Within this partner "IDOC_SENDER" I defined a business service "Order" and assigned ORDERS.ORDERS05 as allowed outbound-interfaces.
Within this business service "Order" I defined a sender communication channel "Order_send_IDOC" with adapter type IDoc.
Based on this I created a receiver determination, interface determination, etc.
I also configured things in IDX1, IDX2. The metadata (structure info of idoc type ORDERS05) was successfully loaded.
Did I miss something? What to do to eliminate this error:
No service for system SAPPEE, client 200 in Integr ation Directory
Message no. SR053
Any help would be greatly appreciated!
Thanks in advance
Renaud

I think there are some mis-configurations:
defined a business service "Order" and assigned ORDERS.ORDERS05 as allowed outbound-interfaces.
You do not define a business service when IDOC/ RFC/ PROXY is sender/ receiver
It should be Business System and it has to be defined in SLD and then imported in ID. (search on SDN for How to create Business System )
defined a sender communication channel "Order_send_IDOC" with adapter type IDoc.
You do not create Sender channel when IDOC/ PROXY is sender.
I would suggest that you follow steps mentioned in this wiki: http://wiki.sdn.sap.com/wiki/display/XI/SAPR3%28Idocs%29ToXI--Steps+Summarized
Regards,
Abhishek.

IDOC Negative acknowledge not triggering system Exception

Hi guys,
I've a send step in my BPM which sends an IDOC and waits for the application acknowledge. After watching several threads, and specially SAP Note 837285, we can read that:
"Permanent negative acknowledgements: If the BPE receives a
permanent negative system or application acknowledgment, the
asynchronous send step waiting for it triggers a system error for
which you can define an exception handling."
Well, in my send step I've placed a system exception for handling this negative acknowledges but eventough I'm getting the negative application acknowlege from R3 (in SXMB_MONI I get the ack figure with a red cross indicating 'Ackonwledgment contains applic. errors'), the BPE doesn't trigger the system exception. Instead it enters in my deadline branch after quite a long time, ending the process....
Can you guys give me a hand?

Hi Ravi,
What is happening is:
After the idoc reaches R3, the Send step begins waiting for the ALEAUD ack from R3. I've got a System Exception for handling negative acks and a deadline branch for communication errors during the sending step... Meanwhile, the negative ack reaches XI (I can see it on the SXMB_MONI of XI) but the send step still waits for the ack. Of course, after the timeframe which was set for the deadline branch, the bpm will be completed because it jumps to that branch.
I can't figure it out why isn't the BPM catching the negative acknowledges..... :S If the acknowledge is error-free, the send step catches it and proceeds to the next step....
Any ideas? suggestions....? crazy attempts....?
The only point possible is the acknowledge received not being a permanent negative ack but a transient negative ack.... How can I check this IMPORTANT point.... ?
Message was edited by:
Gonçalo Mouro Vaz

LabVIEW VI with Report Generation Toolkit elements in a TestStand sequence does not run with a LabVIEW 8.5 Run-Time Engine

Hi all,
I am using LabVIEW 8.5.1 and TestStand 4.1. I have done a TestStand sequence with a VI in it, which uses Report Generation Toolkit elements. On my machine I am using LabVIEW and TestStand with a Development System license. On the other machine I am using TestStand with a Base Deployment license and I have chosen the LabVIEW 8.5 Run-Time Engine in the Adapter Configuration. Everything is running well except of this VI with Report Generation Toolkit elements. The error message is showing that the VI is not executable. It works well only after I have installed LabVIEW with an Evaluation license and chosen LabVIEW 8.5 Development System in the Adapter Configuration.
I have found other posts and a document in the KnowledgeBase with a similar problem: http://digital.ni.com/public.nsf/allkb/8A0E6274D9BD7B1986256F62006AD402?OpenDocument But I am not using EXE files in my sequence, so I don't know how to solve mine. Anybody has an idea?
Solved!
Go to Solution.

Hello guys,
thank you very much for your answers!
@Ruediger:
I tried to follow the instruction for Method 2 in the mentioned document: http://digital.ni.com/public.nsf/allkb/F3DC40A6E3F3B25B862570AD005D1D3D?OpenDocument, but the steps on my machine are different starting from step 4. After I click "Continue..." in step 3, I dont get a window, the system just makes a new folder with the same VI.
To be honest, I am new to LabVIEW and have some difficulties at this time. What I understood from your reply is, that I need to make a LLB-File, where the files from Report Generation Toolkit are in!?
@GovBob:
I was following the instruction in the document: http://digital.ni.com/public.nsf/allkb/9E00E7EFE0635E678625734600779EFE, but it wasnt working. Can you please tell me how I can check if the VI Server is installed and running on the machine?
I am using LabVIEW 8.5.1 and TestStand 4.1 on my machine, on the deploy machine there is TestStand 4.1.1. The version of my Report Generation Toolkit is 1.1.2.
Kind regards, Roman

BPM send step not executed in BPM (after Message split)

Hello everybody,
we use BPM:
We have a paralell Block which should send the rows of a multiline element. In SXMB_BPE_MONI the send step is not executed?
Any idea?
Thanks lot, regards Mario

HI,
Go to SXMB_MONI_BPE->and check the workflow log (technical details).and go to SXI_CACHE and check the return code of the Integration Process. It should be zero. If not try to activate the same
If there is no error then go with like this-
Also check the Syntax in Integration Repository with F7. Change the IP and activate it. If there is no syntax errors.
Then reimport the IP into Directory and then test your scenario
Regards,
Moorthy

SAP PI FTP sender adapter not working with SAP ECC over Itanium

Hi,
We have been running normally SAP PI 7.0 SP14 with no issue for a while.
We are now in the process of migrate the SAP ECC system from PA risc to IA platform. We are performing some tests between SAP PI and SAP ECC to check that the platform migration is not affecting us in any way and we have found that FTP adapter sender is not working anymore (receiver is working as usual).
We place some files in the new ECC system and when PI goes to retreive the files it is like it can not read anything. It gives no error but it does not pick any file. This is not happening with the old platform.
Does anyone have any idea?
Thanks a lot for your help
Diana

Hi,
I am using FTP connection and for the receiver it is working fine.
Thanks
Diana

Cisco Connect does not run with Mac OSX Mountain Lion (10.8.2)

When I first installed Cisco Connect that came with my E1500 router, I was running Mac OSX Snow Leopard (10.7) and it worked fine. I upgraded my OSX to Mountain Lion and now when I start Cisco Connect, I get:
Unsupported operating system
The router software supports these operating systems:
- Mac OS X 10.5.8 or later
- Mac OS X 10.6.1 or later
- Mac OS X 10.7 or later
I saw some other thread/info/download on Cisco Connect with Lion (10.7) but nothing for Moutain Lion (10.8) - is there a fix forthcoming?
Thanks
Gary

All i want to do is disable the guest function through cisco. i live in an apartment and everyone logs into my guest account. i was at my neighbours and they were laughing saying they done need to subscribe for the internet cause they just log onto local wi fi. and mine is one of them. i dont know if that'll slow down my internet with so many people using it. but all i want to do is just avoid it all together and get rid of it. but in this case i am having the same problem as all of you. to disable the guest function you need to go through cisco connect and it is not compatible with mac osx mountain lion. grrrrrrr

HT5268 Just purchased Imac and Macbook pro and upgrades to Mountain Lion. Java will not run with one important site where my Grandson is in Kindergarten out of state with in room camera. What to do. This is very disappointing and non of apple geniuses kno

My new IMac and Macbook Pro are each loaded with Mountain Lion. Have Office for Mac also
When I try to see my Grandson on webcam out of state the login will not activate. For PC use I needed Java and Active X to let it run. My Java is checked as ready to go but nothing happens. Otherwise these are great computers. Please help me through the process. The Geniuses at my apple store can't understand what to do.
[email protected] or [email protected]

By default, OS X does NOT come with Java installed nowadays. You need to open the Java Preferences app found in Utilities; when you do that the first time, it will inform you of the fact and offer to install the product for you.
Afterwards, due to a major security issue we had back in the first quarter of the year, the plugin is disabled by default. You need to revisit the Preferences and enable manually. It will auto-disable if unused in awhile.
Lastly, you may have to adjust which Java instance is being used, the 32-bit or the 64-bit. Default is 64-bit, but some applets crash & burn or outright refuse to run in such a platform. You can prioritize which version you prefer by dragging on top in the Preferences.

Java 6 update 3 not running with Vista

Previously I have had not problems with getting Java applets to work, but I just got a new computer with a Vista operating system and I cannot get any applets to work. I tried uninstalling and reinstalling the lastest JRE from Java's website many times. I also went through their help and made sure the configureations matched that of IE7 which I am using. I have tried older version and even update 4, but I cannot even get the java test machine to work. There is just a red X that eventually shows up after a long wait. Currently, I have update JRE 6 update 4. I have not made any major changes to my computer as it is only a few days old, so I figure that it must be something that is not compatible with Vista. Below is what my Java Console reads after it fails to run when I test my VM on Java's website at http://www.java.com/en/download/help/testvm.xml :
load: class testvmDynamicJavaCom.class not found.
java.lang.ClassNotFoundException: testvmDynamicJavaCom.class
     at sun.applet.AppletClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadCode(Unknown Source)
     at sun.applet.AppletPanel.createApplet(Unknown Source)
     at sun.plugin.AppletViewer.createApplet(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Caused by: java.io.IOException: open HTTP connection failed.
     at sun.applet.AppletClassLoader.getBytes(Unknown Source)
     at sun.applet.AppletClassLoader.access$100(Unknown Source)
     at sun.applet.AppletClassLoader$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     ... 10 more

I have a similar post on this subject goto "gordon freeman" java 1.6.0_06 will not run in Vista.
On my system there is a workaround if you open control panel/user accounts, then turn user account control on or off, untick user acccount control and restart the machine then goto website www.javatester.com to test if appelets run! I leave user account control on until I have to goto java website and then disable visit site and then renable this requires 2 restarts everytime I visit a java site. The problem is some sort of permissions issue created by either corruption of the registry by remnants of previous versions or configurations of previous versions it goint ot take me years to work it out. None of the turkeys at Sun have got any idea how to fix this I now am working with Microsoft in an effort to have this problem fixed!

IDOC send step not running with exception in BPM?

Similar Messages

Maybe you are looking for