IDOC settings from sap r/3 to sap pi7.3

Hi Guru,
actual problem when i am triggering the idoc from ERP,it is trigeering to the abap stack in sap pi.but i am using idoc_aae adapter at sender side,the message is flowing from sap ERP to file but the message is seen in sxmb_moni,but actually it is not seen in moni .
Please if any one have the idoc setting from sap erp to sap pi7.3. and iam using ICO configuration.
Please help me
Regards
Reddy

Hi,
Please go through the below link :
http://wiki.sdn.sap.com/wiki/display/XI/ALE-Idocconfiguration-+%28R3XIFile%29
Also in your software component version please check whether import of IDocs and RFCs are allowed
from your respective ECC system, and check the ECC system parameters are correctlt maintained or not.
Try out once.

Similar Messages

  • IDOC import from CRM 7.0 to SAP PI 7.0 fails: unable to read segments

    Hello,
    We want to import an Idoc from a CRM 7.0 system to SAP PI 7.0.
    The import fails with the message ""unable to read segments".
    The issue is related to ALL Idocs, standard and customer defined.
    The result of any import is that we can see the object in the import folder, but the structure is missing.
    Importing any RFC from the same CRM system is no problem.
    Any ideas?
    Your help is appreciated.
    Regards
    Dirk

    Hi Peter,
    Thank you for your answer.
    But we need to find out what the reason for this import error is.
    Our customer will not be very pleased to see that all IDocs from CRM system cannot be found in the IDOC folder.
    IDX2 import of metadata is no issue.
    We were successful for standard and customer Idocs here.
    Additional information:
    We are already importing Idocs from a SAP ECC 6.0 system into PI in another SWCV
    successfully. So this is a CRM system specific issue in our environment.
    Regards
    Dirk
    Edited by: Meinhard Dirk on Aug 27, 2010 10:30 AM

  • Reg : Idoc Transfer From SAP R/3 to Gentran

    Hi Floks /
    Any body can transfer SAP R/3 idoc to external Sterling Gentran intgration suite . what are process steps required to sending and what are the transaction codes are available in Gentran and Sap .
    can u please help me out.
    thanks
    suresh

    HI,
    See the below links
    In Gentran
    XI with Gentran
    XI vs Gentran for EDI
    SAP ECC 5.0 Upgrade questions with Gentran, BDC, screens
    Gentran EDI ?
    Interuppting/debugging response from Gentran
    Gentran and XI 3.0 question
    Interuppting/debugging response from Gentran
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d53af8ca-0801-0010-08b0-dce9e02130a8
    In R3 IDocs
    /people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters - IDoc to File
    IDOc testing - /people/suraj.sr/blog/2005/12/29/generate-test-case-for-an-idoc-scenario
    /people/ravikumar.allampallam/blog/2005/06/24/convert-any-flat-file-to-any-idoc-java-mapping - Any flat file to any Idoc
    /people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm - Collection of IDoc to Single File
    /people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters - IDoc to File
    File-XI-IDoc Scenario - File to Idoc
    idoc settings /people/ravikumar.allampallam/blog/2005/02/23/configuration-steps-required-for-posting-idocsxi
    idoc erros - http://help.sap.com/saphelp_nw04s/helpdata/en/6a/e6194119d8f323e10000000a155106/content.htm
    idocs - /people/sravya.talanki2/blog/2005/08/24/do-you-like-to-understand-147correlation148-in-xi
    idoc mapping - /people/james.guanzon/blog/2006/03/23/how-to-support-industry-standards-in-xi-part-ii-of-iii--mapping
    IDoc erros troubleshooting - /people/raja.thangamani/blog/2007/07/19/troubleshooting-of-ale-process
    /people/sravya.talanki2/blog/2006/12/27/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-iii
    see the below links to get more details about IDocs
    ALE/ IDOC/ XML
    Troubleshooting of ALE Process - /people/raja.thangamani/blog/2007/07/19/troubleshooting-of-ale-process
    http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
    http://www.thespot4sap.com/Articles/SAP_XML_Business_Integration.asp
    http://help.sap.com/saphelp_srm30/helpdata/en/72/0fe1385bed2815e10000000a114084/content.htm
    IDOC Convertion
    /people/kevin.wilson2/blog/2005/12/07/changing-fields-in-an-idoc-segment
    Please check this online document for ALE and IDoc.
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEIO/BCMIDALEIO.pdf
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEPRO/BCMIDALEPRO.pdf
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFAALEQS/CABFAALEQS.pdf
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDISC/CAEDISCAP_STC.pdf
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDI/CAEDI.pdf
    serialization /people/alessandro.guarneri/blog/2006/11/26/content-based-serialization-dynamic-queue-name-in-xi
    http://www.sapgenie.com/sapedi/idoc_abap.htm
    http://www.henrikfrank.dk/abapexamples/IDOC/gl_postings2.htm
    http://searchsap.techtarget.com/ sDefinition/0,,sid21_gci852485,00.html - 45k - Cached - Similar pages
    Process codes in IDOC
    http://help.sap.com/saphelp_erp2005/helpdata/en/dc/6b806743d711d1893e0000e8323c4f/frameset.htm
    http://edi.stylusstudio.com/msg04418.htm
    Check this link to find out the difference b/w ALE,IDOC and BAPI
    http://www.sap-img.com/abap/ale-bapi.htm
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/sapR3%28Idocs%29ToXI--Steps+Summarized&
    /people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
    ---Split messages :
    /people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
    /people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure
    Regards
    Chilla

  • Move IDOC Configuration from one sap system to other sap system

    Hi All,
    I have a scenario where in we need to move the SAP Configuration including Port,partner funtions details etc to other Sap system .As per my knowledge we have some SAP Standard tables which stores all the SAP Config data .So my thought is that if we move those table entries from sorce sap system to target sap system the task will be completed however i dont know which table entries i need to move.Kindly suggest.
    Venu

    Many of these IDoc settings are not asking for transport requests, since they are considered master data (table class A). They are to be done directly in each system, because the are often linked to information that is or might be specific, like master data, logical system names, path names, etc...
    Please also search for previous discussions, you are probably not the first one encountering this issue.
    Thomas

  • Idoc lost from SAP R/3 to XI

    Hi experts,
    I have the following problem:
    sometimes an idoc fired from SAP (not through WE19) does not reach XI (I cannot see it in SXI_MONITOR). I've checked the following facts:
    1. SAP R/3 status of the idoc is 03 (direction outbound).
    2. SM58 produces no result.
    3. IDX5 produces no result for that idoc.
    4. 99,9% idocs of the same type fired in the same day work fine.
    Resending manually the same Idoc using WE19 gives no problem and the idoc reaches XI.
    any idea?
    Thanks a lot,
    Daniele

    You must see this in WE05 or BD87. Just release the idoc and have a look at we05 or bd87 and limit down the time where to search. in sm58 you can only see the idoc ith the system can not log on to the remote system. Did you check sm58 in the target system? did you check bd87 in the target system?

  • IDoc Packaging from XI/PI to SAP instance - possible?

    Hello,
    I'm looking for a way to package IDocs into a single tRFC call from XI/PI to a SAP instance, has anyone done something similar previously? So far all I've been able to find are solutions for the IDoc Sender Adapter (SAP to XI/PI).
    Messages are sent into PI via the XI protocol one at a time, then mapped and sent to an SAP instance - I do not want to introduce ccBPM into my scenario and we are not at a sufficent SP level to use message packaging. Any ideas?
    Many thanks,
    - Ian

    Hi,
    ahh sorry then:)  then it's even easier this works in standard with any SP:)
    have a look at my blog:
    /people/michal.krawczyk2/blog/2005/12/04/xi-idoc-bundling--the-trick-with-the-occurance-change
    also described in my book with screenshots:
    http://www.sap-press.com/product.cfm?account=&product=H1935
    this approach is very easy
    Regards,
    Michal Krawczyk

  • Urgent: Sending order05 IDOC from R/3 to ICH (SAP SCM) through SAP XI

    Hi All
    I have requirement where I have to send Order05 IDOC from SAP R/3 (ECC 6) to ICH (SAP SCM 5) through SAP XI (PI 7).
    I came to know that there is one standard scenario in SAP SCM Basis content in integration repository.
    I never done any XI development, please guide me with the useful links or whole step by step process. I will be very thankful for your inputs.
    Please reply asap.
    Regards,
    Amol

    Hi !
    Check this note:
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bc_xi/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d383336323030%7d
    Regards,
    Matias.

  • IDoc Acknowledgement from SAP PI to SAP R/3 Server

    Hi Experts,
                  I am sending an IDOC from sap r/3 to SAP PI. After receiving the IDoc I need to send back one acknowledgement to the sap r/3 server, without reaching the target side. Could you guys please help me?
    Thanks
    Dipankar

    it can send back an acknowledgement IDoc (ALEAUDIT) back to R/3 system
    This configuration works for sending ACK message back to the Source system from the Target System and should not be mistaken to enable PI to generate the ACK and send back to the Source system.
    What can be done is include the source system as receiver in the receiver determination (SAP system is both at the source and target....alongwith the existing FILE target service)......configure different ID objects for this Source > PI> Source ACK flow .... map required data in the mapping.....depending on your need you can use the target structure IDOC/ PROXY/ RFC.
    Regards,
    Abhishek.

  • How we can import an IDOC structure from one SAP system to another w/o ALE

    Hi Gurus,
    How we can import an IDOC structure from one SAP system to another? we're not able to use ALE tech, these two sap systems are isolated.
    Any response will be awarded!
    Thanks a lot.
    Samson

    hi,
    1.One is by change pointer concept i.e by executing the RBDMIDOC.We can generate the idoc and automatically to the inbound System.
    2.By executable program also like bd10 and bd11.
    Regards,
    SHIVA(reward if helpful).

  • How we can import an IDOC structure from one SAP system to another

    Hi Gurus,
    How we can import an IDOC structure from one SAP system to another? If we're using ALE, how can we do that? Please can someone give me the process and necessary t codes.
    Any response will be awarded!
    Thanks a lot.
    Samson

    hi!
    Define the logical system names in both the systems.
    Logical system names :SAP001
    SAP002
    SAP001 FOR 001 CLIENT
    SAP002 FOR 002 CLIENT
    These two logical system definitions should be present in both the systems.
    Assign the logical systems to the client. (in both the systems)
    Assign SAP001 to 001 CLIENT
    Assign SAP002 to 002 CLIENT
    you can See these in transaction SALE.
    After this define the rfc DESTINATION IN sm59. (in both the systems)
    In 001 client create the RFC destination name SAP002
    In the tab log on security, give the user name and password and client of the 002 client and save it.
    Similarly do the reverse in the 002 Client.
    In 001 client create the port.(Transaction WE21)
    Specify the RFC destination name as SAP002.
    Now you can define the ports, (both the systems)
    Create the partner profile for partner(ie gve logical system name of partner) , so give as SAP002.
    partner profile in both the systems.
    Now create the distribution model in BD64 and goto edit>model view>distribute.
    The same model view will be visible n distributed to the partner system also..which in this case is sap002.
    U may trigger the idoc from we19 and chk its status in we05.
    Please let me know if you need further info on this.

  • How to trigger IDOC'S from SAP

    Hi All,
    How to trigger IDOC's from SAP(ECC 6)..where can we check this in mii 11.5 weather it is fail/success
    Thanks,
    Abhi

    You can trigger LOIPRO, LOIPLO and a few others manually from POIT (SAP Txn).  Master Data related to orders can be triggered from POIM.  Depending on which IDocs you which to generate, there are other transactions to trigger different IDocs.
    You can also use Triggers from MII to generate IDocs in SAP using CLOI_DOWNLOAD_TRIGGER_MDAT (POIM equivalent) and CLOI_DOWNLOAD_TRIGGER_TRANS (POIT equivalent).
    There is also a rather nice post which detailed the process of using change pointers to automate the IDoc generation and download, but I am having trouble finding it.  Will continue to look and will post link when I find it.
    Regards,
    Mike
    I couldn't find the post I was looking for, but there is an informative note 390635 which may help.
    Edited by: Michael Appleby on May 5, 2009 1:29 PM

  • How to send IDocs from a non-SAP system to a SAP system

    Hi everyone i am new to SAP R/3 System.
    Currently i am required to send IDocs from a non-SAP system to a SAP R/3 System.
    There is a guide on Cost-Effective and Quick Communication between SAP and 3rd Party Systems using IDOC HTTP XML Interface. But its from a SAP system to a non-SAP system and i am able to do that.
    Is there any step by step guide where they teaches you how to send IDocs from a non-SAP system to SAP system via similar method?
    Thank You!

    Hi,
    I hope this link may help you......
    http://publib.boulder.ibm.com/infocenter/iisinfsv/v8r1/index.jsp?topic=/com.ibm.swg.im.iis.ds.entpak.sapr3.use.doc/topics/c_pack_r3_Introduction.html

  • How to check the Idocs sent from SAP system

    How to check the outbound Idocs sent from SAP system to target systems.
    How to know the message types and target systems.

    Hi,
    In Addition with the above mentioned transaction code(WE02), u can check out idocs in these table - EDIDC, EDID4, EDIDS.  Depending on different status you can differentiate them as Inbound or Outbound Idocs...
    Cheers...
    Santosh.
    <i><b>Mark All Usefull Answers...</b></i>

  • Steps of EDI is used to transfer IDOC from R3 system to non sap system

    Hi Experts,
    Can you provide me Steps to configure EDI is used to transfer IDOC from R3 system to non sap system?
    Full points will be assigned.
    Thanks in advance!
    Sapna

    Hello,
             The EDI Configuration required to be done for Transfering IDoc to non SAP System is.
    1. First of all, we need to identify the Transaction Data which is required to be Transfered to external System.(Ex: Sales Order Data or Shipment Data or Delivery Related Data).
    2. Secondly, Identify the IDoc Type & Message Type. IDoc Type can be found in Transaction WE30 & Message Type Can be explored in Transaction WE81.
    3. After that, assign the IDoc Type to Message Type in WE82.
    4. Identify the Selection Program (Outbound) which is generally a Function Module in the Form of IDOC_OUTPUT_<Message Type>. Example, if the Message Type is ORDERS, the FM will be IDOC_OUTPUT_ORDERS.
    5. Assign the Function Module to a Process Code in WE41 (Process Code for Outbound).
    6. Configure Port Definitions in WE21 for which the RFC destinations are to be maintained in Transaction SM59.
    7. Maintain Partner Profiles for the Outbound Message Processing in WE20.
    8. Last, but not the Least, we need to Focus Mainly on Message Control Configuration which is nothing but maintaining the Output Type for the Outbound IDoc to be Triggered for the Sales Order Application or Delivery Application.
       i. In Message Control Configuration, we'll maintain
          a. Condition Tables
          b. Access Sequences
          c. Output Types
       ii. To Create the above elements, we can go to SPRO Transaction and do the same depending on the Application Area such as Sales / Shipping / Logistics Execution etc.
       iii. For Output Types & Access Sequences, we can go to the Transaction NACE or VK01 in which we'll maintain the Output Types / Access Sequences & Condition Records.
       Please note that all the above steps may not be needed if we are using some of the Standard Elements provided by SAP such as Message Type, Process Code, IDoc Type & Selection Program as many of the Standard SAP Applications have their own Elements for different Application Areas.
       For example, if you want to send an Order Confirmation IDoc when the Sales Order is saved, you can use the Message Type ORDRSP, IDoc Type ORDERS05 & Selection Program as IDOC_OUTPUT_ORDRSP.
       However, Message Control Configuration is the Key Factor and is required for all the Applications as per the Customer's / Client's Requirements.
    Hope the above procedure was clear.
    Thanks and Regards,
    Venkat Phani Prasad Konduri

  • PPPI - Process Management - activating standard settings from SAP

    System data ECC 5.0
    I am trying to use process message category PI_ORDCO. The destination is not assigned. I think the destination should be PI14. PI14 is not listed in the dropdown list.
    My guess is the system does not have the current standard settings from SAP "activated". Please help with activating SAP predefined destinations, characteristics, categories, instructions, etc.
    Thanks.
    (moved by to what I hope is the appropriate forum to get an answer to this)
    Message was edited by: Marilyn Pratt

    Hi
    Please try this ->
    <b>http://help.sap.com/saphelp_srm50/helpdata/en/56/54f137a5e6740ae10000009b38f8cf/frameset.htm
    http://help.sap.com/saphelp_srm50/helpdata/en/bb/6c0e3b02616a42e10000000a11402f/frameset.htm
    http://help.sap.com/saphelp_srm50/helpdata/en/62/fb7d3cb7f58910e10000000a114084/frameset.htm
    http://help.sap.com/saphelp_srm50/helpdata/en/5e/88ef3bc8821d0de10000000a114084/frameset.htm</b>
    Regards
    - Atul

Maybe you are looking for

  • Broken connector pin on my ipod

    Hi everyone, i was trying to charge my ipod (4th generation, 64GB) yesterday but it didn't work. I've noticed that one pin is folded/broken on the bottom: the charger doesn't fit. I bought the ipod on amazon from Apple... Is it going to be expensive

  • Can`t install JRE to AMD64

    i`m trying to install: Windows AMD64 Platform - J2SE(TM) Runtime Environment 5.0 Update 4 -Windows AMD64 executable i have amd64 processor + winXP pro (32bit) and get error message: [Computer processor not support this installing packet Take contact

  • Sub-Total Issue

    Is there anyway i can update subtotal KZWI6 with a value, becasuse of a configuration mistake in the pricing procedure the system took zero value into the sub-total for certain invoices.

  • Need a simple html theme

    Hello everybody, i need a simple just html, no script or flash theme, for doing my photo albums. I have some veryyyy important people (gf and brother :)) than can't see those beacouse they do it on the corporate laptop and all the "bad stuff" are dis

  • Where to find xrpcc?

    Hi all I have downloaded the jwsdp-1.3 and in the pdf tutorial, I couldn't find the <installation>/tutorial directory and I have seen some posts here saying the xrpcc is under the <installation>/tutorial/jaxrpc/bin/ directory. Has the directory chang