IDOC status not changed
SAP support
I am not able to change the IDOC status...
I have also processed the IDOCs many times..
Guidance required...
Kamal
Dear Kamal
Please check your entry in SM12 an delete it and again reprocess it with the help of Tcode Bd87
Thanks
Amit Shivhare
Similar Messages
-
Status Profile : Status not changing in CRM
Hi Gurus
Created order with header status as as " In process" , item status is defaulted to " open" and order replicatd to ECC , billed aswell . But when I checked in CRM still status not changing to completed but retains with In process at header level & open at item level.
I would expect order status should be completed at header level & Item level.
Is there any thing wrong with status profile settings at header & Item level? , I have created status profiles with following settings.
I have copied standard status profile " CRMORDER" and assigned to trasaction type and made following settings:
Under Open : following transactional contorl selected
To be distributed : Selected options "Forbidden " & No active
Under In process:
In process : Selected options " Allowed " & Set
Undo Rejection : Selected options " No infulence " & Set
Under Completed:
Complete : Selected options " Allow " & Set
Created status profile for Item i.e. copied standard CRMORD_i and made following changes:
Under Open : No transaction control selected
Under In Process :
Edit : Seleted options " No influence" & Set
Undo Rejection : Selected options " No Influence & Set
Under Completed:
Completed : Selected options " Allowed & Set"
Rejected : Selected options " Allowed & Set"
Actually we are using material which is non deliverable but should be billed, while creating order , I can see staus at item level is open and remains open even after billed in ECC. And also we are mapping Business activity reasons to order reasons in ECC.
Is any thing i am selecting wrong options in status profile at header level & item level? Much appricieated for solution.
Thanks
shashHi Gurus
Created order with header status as as " In process" , item status is defaulted to " open" and order replicatd to ECC , billed aswell . But when I checked in CRM still status not changing to completed but retains with In process at header level & open at item level.
I would expect order status should be completed at header level & Item level.
Is there any thing wrong with status profile settings at header & Item level? , I have created status profiles with following settings.
I have copied standard status profile " CRMORDER" and assigned to trasaction type and made following settings:
Under Open : following transactional contorl selected
To be distributed : Selected options "Forbidden " & No active
Under In process:
In process : Selected options " Allowed " & Set
Undo Rejection : Selected options " No infulence " & Set
Under Completed:
Complete : Selected options " Allow " & Set
Created status profile for Item i.e. copied standard CRMORD_i and made following changes:
Under Open : No transaction control selected
Under In Process :
Edit : Seleted options " No influence" & Set
Undo Rejection : Selected options " No Influence & Set
Under Completed:
Completed : Selected options " Allowed & Set"
Rejected : Selected options " Allowed & Set"
Actually we are using material which is non deliverable but should be billed, while creating order , I can see staus at item level is open and remains open even after billed in ECC. And also we are mapping Business activity reasons to order reasons in ECC.
Not sure whether i am selecting wrong options in status profile at header level & item level?
Plz help me on this.
Thanks
shash -
Preference status not changed for the processed products
Hello All,
While Aggregating the vendor declaration, I am getting the message as below
Preference status not changed for the processed products
Could you please help me to resolve this issue.
Thanks & Regards
RahulHello Rahul,
aggregation is not changing status on LTVD. (Possibly LTVD has been already agregated). Newly maintained LTVD is not changing status of the product, its remaining negative whatsoever.
Kr,
Gabriel. -
Presence status not changed when using Lync 2010 Remote Call Control
Hello,
I'm currently testing the Remote Call Control functionality of Lync 2010. Call management works fine but I'm surprised that my presence status does not change to "In a Call" when the call is established.
OriginatedEvent, DeliveredEvent and EstablishedEvent are forwarded correctly to Lync Client 2010. All responses are "200 OK".
Is there something more to send to Lync Server 2010 so the status of the Lync Client gets correctly updated to "In a Call" ? Or is a plugin for the Lync Client necessary to achieve this ?
Thank you in advance,
MartinI think there's something missing from your scenario and I don't believe you would need a plugin for this. It's been forever since I've set up RCC with Lync 2010 however. I know this isn't what you're looking for, but I've used this product in
the past to configure Lync and RCC with third party PBXs that don't support Lync/RCC but do have a TAPI interface.
http://www.estos.com/products/drivers-middleware/callcontrolgateway400.html I've been able to get a free trial before and it worked like a charm for an old 3COM phone system. If you can get a trial it might help you compare apples to apples provided
you have a TAPI driver for your PBX.
For more details on what happens behind the scenes, you might have some better luck in the MSDN dev forums:
http://social.msdn.microsoft.com/Forums/en-US/home?category=uc
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications
This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
Task status not changing in UWL
Task status is not changed in UWL when the task is executed from UWL . workitems transfered from R/3 by executing a workflow .SAP says real time refresh not supports in this UWL version.
please let me know any workaround to solve this issue.
Thanks
Saraththats right.
UWL does not refresh immediately. You need to refresh the UWL again.
As I saw over internet, the Real-time Refresh feature for Universal Worklist is available in SAP NetWeaver 702 SP02 and above, and SAP NetWeaver CE 7.20 SP01 and above.
Thanks
Krishna -
Partititon1,2,3 in group ODS,FAC status not change after data redistribute
Hello,
first thanks for your help. By now the db2 data redistribute has been sucessful. but another issue occurs , could you give me some suggestion?
1. run Tcode dbacockpit-->db2 for linux, unix, and windows database > configuration>database partiton group
i found the stutus in db partion group NGRP_FAC_AB7 and NGRP_ODS_AB7 and partion 1,2.3. is partion not in partitioning map containers created. I know if we want to change the status from this to partion in partioning map status , we should do a redistribute.
i have made a redistribute action like this
1. double click what i want to distribute
2. select the relevant partition , for example partition 0001
3 click the execute immediatelly button .
when i finished , the status is not changed . so i change the redistribute log located in /db2/db2ab7/sqllib/redist/ AB7.NGRP_FACT_AB7.2008022808582 .
the log message is
Data Redistribution cannot be continued.
Error: Redistribution failed with SQLCODE=-6047 (rc=-2145779603).
the SQL 6047 detail information is like the following. I don't know what happens.
it's a SAP bug just like the previous issue ? Could you give me some suggestion ? Thanks
db2 => ? sql6047
SQL6047N Database partition group cannot be redistributed
because table "<name>" does not have a partitioning
key.
Explanation:
At least one table in the single-node database partition does not
have a partitioning key. All tables in the single-node database
must have a partitioning key before the database partition group
can be redistributed to a multiple-node database partition
group.
The operation was not performed.
User Response:
Use the ALTER TABLE command to specify partitioning keys for
tables that do not have one. Then try the request againBefore redistribution, do your tables reside on only one partition? Does the error message you get list the table or tables that do not have a partitioning key?
All fact tables, ODS tables and PSA tables are created with a partitioning key in a SAP BI system. However, in the FACT and ODS tablespace, there are a few BI management tables (name starting with 'RS') that do not get a partitioning key by default if created in a tablespace on only one partition. The BI data distribution wizard in the DBA Cockpit takes care of some of these tables, for example RSDMFACTAB and RSDMODSTAB. Maybe there are some additional ones.
Please list the names of the tables without partitioning key. If the error message does not contain them, you can get them with the following SQL statement:
select varchar(tabname,30)
from syscat.tables a
where tbspace='<your_tablespace>'
and not exists (select partkeyseq from syscat.columns b
where a.tabschema=b.tabschema and a.tabname=b.tabname
and b.partkeyseq > 0)
Brigitte -
Status not changing to Available after sleep?
Just recently got my wife a MacBook (white). I got her setup with iChat and it's working well except for the status. When she wakes it from sleep, it logs her back into iChat, but keeps a status of "Away". I did change the option in Prefs to "Set me as Available" when coming back or something like that.
What am I doing wrong? Anyone?Hi,
In the General Section of the iChat Preferences you can set one of three option on "Returning to my Computer" which normally refers to Waking from Sleep or coming back from the Screen saver.
One of the options as you say, is to set the Status to Available (If it was set to Away before).
Like you I find it does not work.
I have also tried the sub-options in the Menu Bar Icon bit about Logging out of AIM if I quit (Which Sleep will be considered as the same thing).
Basically I was trying to find if this setting over-rides the lower one.
I Set it to At User Login set my Status to Available which I know works on Start up. But from Sleep this does not over-ride the Status Message when it is set to Away.
If the above setting is not set the same thing happens (it stays as Away when I wake the computer.
Whether I have it set to Set Me as Off Line when I Quit (paraphrased) or not also does not change the Status Message on waking the computer.
Not even turning Off Auto-Reply with Away message made any difference.
That leaves two things.
Does this setting have anything to do with Sleep of Screen Saver ? (is it something else ?)
Is it a bug ?
iChat help has this on Setting the Status.
If you are away from your computer for a time, your status is displayed as “Idle.” Messages that arrive while you’re away wait on your screen
This implies the former. i.e. if you have set the Status as Away and physically leave the computer and the Idle time kicks in before Sleep or Screen Saver then iChat will change you Status to Idle (Although it can not actually display this varient of Idle).
Also there is not setting if I am Idle change my status to Away either.
The Idle time is preset at 600 seconds (10 mins)
My Screen Saver kicks in earlier than this and may over-ride this.
Right this minute I do not have 10 ins to do something else or wait until the Idle time kicks in.
Summary.
This issue seems to be something based on what Away means in this context.
I suggest it refers to the Idle time (which is hidden from your Buddies if you have set Away as the Status).
Hope this helps.
9:56 PM Wednesday; February 18, 2009 -
HU status not changing after GR
Hi All,
For a stock transfer order we create outbound delivery and create HU and then do PGI and at the receiving site we do GR via HU in MIGO transaction.
however the status of the HU changes after it is created and after it is PGI ,,, but after doin GR the status does not change.
Please help me with this ,,,
Regards,
Samuelhi,
I am doing GR in MIGO transaction with respect to outbound delivery via HU, I am not creating inbound delivery.
Regards,
Samuel -
Service Order status Not Changing From Resloved to Closed status
The service order Status not automatically moving from Resolved to closed after 30days.
Observation
We Revived program Z program ,seems to be fine.
I am set the program in debugging mode for testing the Service orders by reduce the time duraion for staus resolved to closed, am getting the getting the Error Test determination procedure is not evaluated .
Point of dout
1) Is there any relation between Test Determination Procedure and Z program.
2) while am checking for Text Customing for Consistency I found an error Log.
3) While creating Service Order Test field was Mandatory
for that have dout about is there any relation between for this program
Thanks in Advance
Regards
Raju.........Solved ...
BD75 (RBDMOIND ) is T-Code and report name ...
need to schedule ... -
IDOC status is changed to '03' in the weekends.
Hi,
The IDOC'S which remains in 30 status for the whole week is being picked by some autosys job and changed to '03' status.I want to know the program which changes this IDOC.I have checked the change time of the idoc and checked with the jobs which run in that particular time.But dint get any relevant job.
can any one help me in finding the program which changes these IDOCS.
Thanks in advance.Hi,
The IDOC'S which remains in 30 status for the whole week is being picked by some autosys job and changed to '03' status.I want to know the program which changes this IDOC.I have checked the change time of the idoc and checked with the jobs which run in that particular time.But dint get any relevant job.
can any one help me in finding the program which changes these IDOCS.
Thanks in advance. -
Sales order status not changed
Even after all line items Delivered and Accounting document cleared, sales order's status is "Being Processed".
SO is still showing open order list in VA05..There are not much changes done in SO...What could be the reason...Just check the customer master in Sales Area data Shipping tab - Partial delivery per item. It should be set as D - No limit to subsequent deliveries. Change it to some other value as per the business requirement, and check with new order. It will not show the status Being Processed.
Master data plays a major role in any such conditions.
Thanks/Sheetal -
Status Not changed in Activity Screen
Helo Experts
In activity screen MORE menu, i have option SET TO COMPLETED. If i click on it then the STATUS textbox should change to COMPLETED (either from OPEN / INPROCESS). But thats not happening..... i have the following code for it. Kindly go through and can let me know whats the problem.
Set to Completed button
ls_button-text = cl_wd_utilities=>get_otr_text_by_alias( 'CRM_UIU_BT_ACTIVITY/SETTOCOMPLETED' ).
ls_button-on_click = 'COMPLETED'.
ls_button-tooltip = ls_button-text.
ls_button-page_id = me->component_id.
if lv_status eq 'E0003'.
ls_button-enabled = abap_false.
else.
ls_button-enabled = abap_true.
endif.
append ls_button to rt_buttons.
clear ls_button.
ls_button-text = cl_wd_utilities=>get_otr_text_by_alias( 'CRM_UIU_BT_ACTIVITY/PDFAFS' ).
ls_button-on_click = 'CREATE_FACT_SHEET'.
ls_button-tooltip = ls_button-text.
ls_button-page_id = me->component_id.
lv_activity_guid = ls_btadminh-guid.
call method cl_crm_uiu_activity_tools=>check_pdfafs_allowed
exporting
iv_activity_guid = lv_activity_guid
iv_pdfafs_create = 'X'
IV_PDFAFS_SAVE =
importing
ev_pdfafs_allowed = lv_pdfafs_allowed
ES_ORDERADM_H =
if lv_pdfafs_allowed eq 'X'.
ls_button-enabled = abap_true.
else.
ls_button-enabled = abap_false.
endif.
append ls_button to rt_buttons.
clear ls_button.
Thanks in advance
Rohan
Hi Experts
Waiting for your Inputs.
Thanks & Regards
Rohan
Edited by: Rohan M on Nov 7, 2008 3:10 PMHi Rohan,
I can suggest you an approach for this. Try the steps below.
1) Move the button definition to the GET_BUTTONS method of the view controller class. Leave the DO_PREPARE_OUTPUT method as clean as possible. Make sure that the event name is in the same case in the button-on_click parameter and the event handler name (you can check the event handler name in DO_HANDLE_EVENT).
2) As you know there would be NEW STATUS dropdown available to change the status. Go to the getter and setter methods of this attribute. From there there should be an BOL Action which will be triggered. This action takes the status which is set. This is the place where the status change mechanism starts.
3) Try to call the same BOL Action in your event handler COMPLETED. If you want to commit the change to the database, you can call the transaction manager class commit method. You can refer SAVE method of your view impl class.
Hope this helps.
Regards,
Vinay -
IDoc does not change from state 30 to 03
Hello,
I am trying to send out an IDoc via tRFC Port. The IDoc in some cases is transferred successfully trough the port. In some cases it stays in state 30 on sender side. I tried to post-process the IDoc via transaction BD87 and via report RSEOUT00. Nevertheless the IDoc stays in state 30. I do not receive an error message. The only message that is displayed by a popup window tells that 1 IDoc has been selected.
Btw, I am using IDocs of version 3.0/3.1. The sending system is ECC6.0.
Can anyone help me? Thanks a lot in advance!Hi Ron,
just to add to what was already said, please not that when sending idoc in queue mode from ECC, if the idoc is generated from WE19 it will always be stuck in WEOUTQUEUE Until you will activate it there and release it.
Note that for EOIO Idoc stuck in the inbound queue of ECC instead you have WEINBQUEUE.
Additionally note that status 03 is a temporary status that does not mean that the idoc was delivered to the target system but only passed to the port.
The final status is 12, you can get it scheduling the report RBDMOIND that updates the status.
Regards,
Sergio -
PR status not changed ..?
Hi experts
Can anybody give some inputs for below issue
1.PR has been created , same PR conevertd into PO.
2.After creating PO with reference to PR, the status of PR should change .
3.Here PR status is showing as not edited..? After converted to PO.
4.How to change the PR status as PO created with PO no, ?
Deal all pour some inputs and rectification points from ur side.
Thanks
MM groupDear ,
Kindly check if PO created with ref to PR is correct PR Number or not...
Same you can see under Status Tab of PR...
Check whether it is showing any PO number or not.
Regards
Utsav -
SHC status not changing to - PO created
Hi Gurus,
I am facing an issue with SHC status. It is working perfectly fine in Dev but not in integration.
I have the setting- "Sourcing never carried out" . So, when a shopping cart is created, it should create a PO in held mode.
When I create a SHC with no approval workflow WS10000060, the shopping cart status remains as approved. It doesn't change to Follow on document created.
Regards
KapilPrinter did not exist so, error in PO creation
Maybe you are looking for
-
TS3899 I changed from an Iphone to a Android. I can't get my email from other Iphones
I changed from an Iphone to a Android. Now I can't recieve emails from other Iphones.
-
Mac OS 9 needed on Powerbook with OS 10.3.3 only
I have just purchased a used (immaculate) 17 inch Powerbook with OS 10.3.3 installed. When installing Photoshop I have to put in 5.5 first then upgrade CD to install Photoshop 7. Photoshop 5.5 apparently requires OS 9 to install. When I put the CD in
-
Nano charging via in car Griffin's firewire "powerpod"
I have a Griffin powerpod fireware charger in my car that I used for years on my 20gb ipod. I'm wondering if it will charge my ipod nano. I realized the nano is USB, etc etc...but am curious if the powerpod will deliver power to charge the battery an
-
3D: Create Painting Overlay for a single element?
This relates to the 3D painting tools. Specifically it relates to cases in which the model file has one material assigned to many individual elements. I see that I can create a template for the file as a whole (all elements listed in the 3D tab) usin
-
ORA-12705 Invalid or unknown NLS_LANG parameter value specified
Hi, I am trying to connect to a remote Oracle 8i database using TOAD.I have Oracle 8i and 9i installed on Windows XP Professional.I am able to connect via SQL*PlUS and OEM.Initially I was able to connect with TOAD.Then I changed the environment varia