IDoc To JMS Scenario

Hi,
My Scenario is to recieve IDocs from SAP Backend System and send it to MQ queue via JMS Adapter.
When recieving the IDoc messages in XI from SAP Backend system I get the following error message in transaction SXMB_MONI:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.ConfigException: ConfigException in XI protocol handler. Failed to determine a receiver agreement for the given message. Root cause: com.sap.aii.af.service.cpa.impl.exception.CPALookupException: Couldn't retrieve outbound binding for the given P/S/A values: FP=;TP=;FS=KMD_SAPR3_Z52002;TS=KMD_MQ;AN=IA_XITEST;ANS=http://kmd.dk/gfx/vl906/LoadTest/SingleClient/MQ;</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
I have checked that receiver agreement has been set up correctly.
Hope that someone can help.
Regards,
Morten

Hi,
Check the receiver agreement is properly configured and edit it then save and activate and try it out
Regards
Agasthuri Doss

Similar Messages

IDOC acknowlegment IDOC-PI-JMS Scenario

Hi,
I have a IDOC-PI-JMS scenario. (With msg branching, PI 7.1 EHP1)
The message are processing but it seems that there is no acknolegment sent back to the ECC system; the outbound IDOC remains in status 03.
By turning acknologement off in IDX_NOALE everything is OK except the IDOC remaining in status 03.
I found this how-to document for the IDOC-PI-IDOC scenario, but I need to configure IDOC acknowlegment for IDOC-PI-JMS scenario, someone can point to some guide/how-to? Do I need to still do all the ALE Audit configuration?
http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f6d2d790-0201-0010-9382-b50b499b3fbe
Thanks,
Martin

Hi Martin,
Please go this article [http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f6d2d790-0201-0010-9382-b50b499b3fbe?quicklink=index&overridelayout=true] and [http://help.sap.com/saphelp_nwpi71/helpdata/EN/ab/bdb13b00ae793be10000000a11402f/frameset.htm] for information about How to handle the Idocs acknowledgements.
Regards,
Kalpana.

Idoc-xi-jms scenario

Hi
I want sender service name in the receiver payload header. How should we go abt ? I am talking abt the scenario like idoc-xi-jms.
thanks
kumar

have a look at the following
http://help.sap.com/saphelp_nw04/helpdata/en/43/c4cdfc334824478090739c04c4a249/frameset.htm
Thanx
Aamir

Character Encoding for IDOC to JMS scenario with foreign characters

Dear Experts,
The scenario is desribed as follows:
Issue Description:
There is an IDOC which is created after extracting data from different countries (but only one country at a time). So, for instance first time the data is picked in Greek and Latin and corresponding IDOC is created and sent to PI, the next time plain English and sent to PI and next Chinese and so on. As of now every time this IDOC reaches PI ,it comes with UTF-8 character encoding as seen in the IDOC XML.
I am converting this IDOC XML into single string flat file (currently taking the default encoding UTF-8) and sending it to receiver JMS Queue (MQ Series). Now when this data is picked up from the end recepient from the corresponding queue in MQ Series, they see ? wherever there is a Greek/latin characters (may be because that should be having a different encoding like ISO-8859_7). This is causing issues at their end.
My Understanding
SAP system should trigger the IDOC with the right code page i.e if the IDOC is sent with Greek/Latin code page should be ISO-8859_7, if this same IDOC is sent with Chinese characters the corresponding code page else UTF-8 or default code page.
Once this is sent correctly from SAP, Java Mapping should have to use the correct code page when righting the bytes to outputstream and then we would also need to set the right code page as JMS Header before putting the message in the JMS queue so that receiver can interpret it.
Queries:
1. Is my approach for the scenario correct, if not please guide me to the right approach.
2. Does SAP support different code page being picked for the same IDOC based on different data set. If so how is it achieved.
3. What is the JMS Header property to set the right code page. I think there should be some JMS Header defined by MQ Series for Character Encoding which I should be setting correctly) I find that there is a property to set the CCSID in JMS Receiver Adapter but that only refers to Non-ASCII names and doesn't refer to the payload content.
I would appreciate if anybody can give me pointers on how to resolve this issue.
Thanks,
Pratik

Hi Pratik,
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/502991a2-45d9-2910-d99f-8aba5d79fb42?quicklink=index&overridelayout=true
This link might help.
regards
Anupam

Idoc to jms scenario issue

Hi All,
I have a scenario where I have PAYEXT IDocs and EUPEXR Idocs coming to XI which needs to be delivered to same target JMS queue.
I have used two mapping as they are two different IDocs. The target message structure is same for both.
Now at runtime I receive IDocs in random order, what I need to ensure is for a set of PAYEXT IDocs I have a following 1 EUPEXR IDoc. So I need to first guarantee that all PAYEXT IDocs have been sent then I can sent the EUPEXR IDoc for that set.
There is a relation between PAYEXT and EUPEXR where for a set of messages coming to XI, for number of PAYEXT there will be one EUPEXR and the EUPEXR.E1EDRD1 contains all the IDoc numbers of PAYEXT.
Thanks in advance.
Ravijeet

Ravijeet,
As you mentioned earlier you both messages are relevant. You have two options..
1. Create BPM so that you can decide which message need to send first.
2. Or as suggested by michael at SAR R/3 level make sure you send PAYEXT before EUPEXR . However SAP XI side you need to assign one single dedicated queue so that all messages will be queue in one single Message queue. You can set dedicated queue to your interface ( SXMB_ADM-->Manage Queues) so that the messages willl be process in the sequence they have received.
Hope this will help.
Thanks,
Nilesh

IDOC TO JMS CONFIGURATION

Hello ,
can any help me "HOW TO CONFIGURE THE IDOC TO JMS "
plz send the screen shots for idoc to file
thanking u

in case of IDOCs involved you need to consider the following;
Sent/Receive IDOC:
you need to do the following:
In XI
SM59 - R3 connection pointing to R3
IDX1 - define the port with the above dest.
In R3
SM59 - R3 connection pointing to XI
WE21 - define the port with the above dest.
WE20 - Partner profile type outbound/Inbound
IDOC -> File
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
At the JMS end, ref:
https://websmp205.sap-ag.de/~form/sapnet?_SHORTKEY=01200252310000071155&_SCENARIO=01100035870000000202
There are many how to guides on JMS here.
Go through Following Weblogs its very helpful in implementing you IDOC to JMS scenario.
/people/william.li/blog/2006/11/13/how-to-use-saps-webas-j2ees-jms-queue-in-exchange-infrastructure
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f02d12a7-0201-0010-5780-8bfc7d12f891
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5059f110-0d01-0010-7c8b-fdc983be70c0
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/cdded790-0201-0010-6db8-beb9bb2b2660
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
/people/raja.thangamani/blog/2007/07/19/troubleshooting-of-ale-process

IDOC-XI-JMS Adapter

Hi
I have to build interface for scenario IDOC-XI-JMS adapter and legacy syetem is MQ-series. All the jar files has been deployed which is the pre-requisite to use JMS adapter.
Can anyone tell me if I should send data in file or as message.
Also if you can tell me the steps to build this interface. Please refer to some relevant blogs but would appriciate if you can explain me steps.
Points will be rewarded for the appropirate replies.
Regards

Hi,
>IDOC-XI-JMS adapter
Sender Side IDOC Adapter, Hence No Need Sender Agreement, Import the IDOC in XI System , Declare the Data Type for the Receiver side..Message Type..Message Interface as Ingoung..Do Message Mapping..Interface Mapping..In Configuratio Receiver JMS Adapter. Mention the Driver Information,User ID & Password and go ahead and test it
Regards
Agasthuri Doss

Need information regarding IDOC to JDBC Scenarios.

Hi,
Kindly help me with the pre-requisites inorder to start with a scenario of IDOC to JDBC and also the scenario of JDBC to IDOC.
Regards,
Sreedhar, Av

Hello Sreedhar,
While we working in JDBC or JMS Adapters we should deploy the Drivers..
Go through this links,
/people/varadharajan.krishnasamy/blog/2007/02/27/configuring-jdbc-connector-service-to-perform-database-lookups
http://searchsap.techtarget.com/tip/0,289483,sid21_gci1246926,00.html
To install JDBC driver follow the how to guide.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/xi-how-to-guides/how%20to%20install%20and%20configure%20external%20drivers%20for%20jdbc%20and%20jms%20adapters.pdf
Configuration of JDBC Adapter for SQL Server
JDBC Driver = com.microsoft.jdbc.sqlserver.SQLServerDriver
Connection = jdbc:microsoft:sqlserver://hostname:<port>;DatabaseName=<DBName>
UserID and Password.
If the connection is not working find the correct port number.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40b92770-db81-2a10-8e91-f747188d8033
JDBC- X I - R/3 Scenario
/people/bhavesh.kantilal/blog/2006/07/03/jdbc-receiver-adapter--synchronous-select-150-step-by-step
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30
Please check the driver path as mentioned below.
JDBC Driver : sun.jdbc.odbc.JdbcOdbcDriver
Connection:jdbc:odbc:Driver={Microsoft Access Driver (*.mdb)};DBQ=//location of DB table.mdb;
No JDBC driver required.
Receiver JDBC scenario MS access - /people/sameer.shadab/blog/2005/10/24/connecting-to-ms-access-using-receiver-jdbc-adapter-without-dsn
follow this thread
Re: Problem when connecting to MS Access through JDBC Adapter.
SAP Note 850116 has details
2) While we working in IDOC Adapters we should do ALE Config of IDOC Settings .
Do these configurations in R/3 and in XI...
SAP XI
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (IDX1)
a) Select create new button
b) Enter the port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Load Meta Data for IDOC (IDX2)
a) Create new
b) IDOC Message Type
c) Enter port created in IDX1.
SAP R/3
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (We21)
a) First Select Transactional RFC and then click create button
b) Enter the destination port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Create Partner Profile (WE20)
a) Create New
b) Create the Partner no. name as same the logical system name of the destination system.
c) Select Partner type LS
d) Enter details for Type: US/USER, Agent, and Lang.
e) Click on the + button to select the message type.
f) Select Partner no. and LS which ever create above.
g) Select Message type
h) Select Process code related to the Message type.
I) save.
Here in IDOC to JDBC interface we need not to config sender Adapter..
1) The main usage of a sender adapter is to convert the input format into the XI supported XML format.
Once the conversion is completed the sender agreement appends the header with the sender details.
In case of these adapters we wont require sender agreement and sender communicationchannel for the
following reasons.
Sender agreement is associated with a namespace when we shoot an idoc frm r/3 if already contains its standard sap namespace. so those is need of sender agreement
The sender communication channel use is to identify the sending system and adapter, as the idoc header contains the details there is no need to sender.
These adapters resides on ABAP stack here the integration server takes care of IDOC/HTTP to XML conversion without requirement of adapter.
The business system that is sending the adapter has already been assigned to a techinical system which normally acts as an integration server...
IDOC to xi links
/people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
/people/venugopalarao.immadisetty/blog/2007/01/24/troubleshooting-file-to-idoc-scenario-in-xi
Hope this explanation is useful to u..
Thanks,
Satya Kumar
Edited by: SATYA KUMAR AKKARABOYANA on Jun 3, 2008 9:57 AM

Idoc-xi-file scenario. how to display file in html format

I am not sure whether this is a valid question.........but want to confirm as it was asked by somebody
In idoc-xi-file scenario....... how to display file in html format ??
Thanks in advance
Kumar

Hi Vijayakumar,
Thanks for your reply !! You mean to say I got to use XSLT mapping and also .htm and .html extension together to produce the html file ?? or it is sufficient to use any one of them to produce the html file ??
Regards
Kumar

In idoc to file scenario, if XI system is down where do idocs pile up?

In idoc to file scenario, if XI system is down where do idocs pile up (get stuck)
what tcode can I use to reprocess it?

Sender System ,Check BD87 .. you will see alll the IDOCs in Yellow state ..
You can reprocess all the IDOCs in go from there .. if only they are in yellow state ...
regards
PS

FIle Content Conversion Problem in IDOC-XI-File Scenario

Dear All,
I am doing IDOC-XI-FILE scenario.
I am facing one problem related to File Content Coversion.My requirement was to generate a dynamic file like %store_code%_%current_date%_sitemaster.xml , I have completed the dynamic generation successfully .
Now there is slight change in the requirement ,we have to suppress the current_date node of the xml content . i have tried to suppress the current_date using these DATE.fieldFixedLengths 0 , Date.fixedLengthTooShortHandling Cut , But I am unable to suppress it Can some body provide me the details on this .
The output xml version generated by Reciever file adapter is as below :
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_SITE_MASTER xmlns:ns0="http://sample-xitest.com/sitemaster">
- <SITE_DATA>
<STORE_CODE>N002</STORE_CODE>
<TITLE_MEDI>Company</TITLE_MEDI>
<STORE_NAME>Mount Road</STORE_NAME>
<STREET>Chennai</STREET>
<COUNTRY>IN</COUNTRY>
<SALES_TAX_NO>12345678910</SALES_TAX_NO>
</SITE_DATA>
</ns0:MT_SITE_MASTER>
Plz provide me the code I have to write in the file content conversion .
Thanks in advance
Regards
Prabhat

If u see my earlier reply, I mentioned that u can not suppress the field from the one node.i.e Form SITE_DATA data type u can not suppress the field called CURRENT_DATE.
My suggestion is that , modify the Data type in such a way that you will be having two nodes as I have mentioned earlier. Then use the Suppress Logic for the Current Date.
So it will look like this-
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_SITE_MASTER xmlns:ns0="http://sample-xitest.com/sitemaster">
- <SITE_DATA>
<STORE_CODE>N002</STORE_CODE>
<TITLE_MEDI>Company</TITLE_MEDI>
<STORE_NAME>Mount Road</STORE_NAME>
<STREET>Chennai</STREET>
<COUNTRY>IN</COUNTRY>
<SALES_TAX_NO>12345678910</SALES_TAX_NO>
</SITE_DATA>
<CURR_DATE>
<CURRENT_DATE>20051105</CURRENT_DATE>
</CURR_DATE>
</ns0:MT_SITE_MASTER>
So ur SITE_DATA is not having a field called CURRENT_DATE. This field is in separate node (segment ) called CURR_DATE. Now u can use the Suppress Logic for the same like this.
CURR_DATE.fieldFixedLengths - 0
CURR_DATE.fixedLengthTooShortHanling - Cut
And in your Variable Substitution you can use the date from the other segment called CURR_DATE.
Hope this solves ur problem.
Regards,
Moorthy

Error/Doubts in Idoc-XI-File scenario

Dear All,
I am doing one scenario in which DELIVERY idoc is posted from R/3 to XI and then from XI that idoc is to be sent as flat file to one local folder.
For this scenario, I have done all ALE settings and I am able to see the idoc in XI in cXML format.Now I want to sent it as flat file.
Now, for doing this I created 2 BS & 2 TS. 1 BS & TS of type Third Party for receiver & 1 BS & TS are of type Web as ABAP for sender. Then I have created one namespace in IR. I have not created any DT, MT, MI, MM becoz the structure of source and target file are same. Now, I created one IM in which I specified specified Type as "ABAP Class" & Mapping program name as one of the Z function module as specified in one of the SAP Guides.
Then in ID, I created 2 Parties ie. one for Sender & one for receiver. Sender is having a communication channel of type Idoc & receiver is having communication channel of type File. And thn further Receiver Agreement, Inetrface Determination, Sender Agreement & Receiver Agreement are configured.
In my system there is one scenario already configured which is using Delivery idoc so I have used party in my scenario for both sender & receiver.
Now, when I am sending the idoc from R/3, I am able to see cXML in SXMB_MONI but it is taking receiver as the one which is defined for the already existing scenario but not the receiver defined by me.
Can anybody guide if I have followed the correct steps & where I am doing the error.
Warm Regards,
N.Jain

Hi ,
Plese refer the following blogs ,
IDoc to File
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
You have to do all this settings mentioned in the docuemnt:
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/sapR3%28Idocs%29ToXI--Steps+Summarized&
Also can you check this weblogs on the same:
/people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi
/people/venugopalarao.immadisetty/blog/2007/01/24/troubleshooting-file-to-idoc-scenario-in-xi
/people/michal.krawczyk2/blog/2005/03/29/xi-error--unable-to-convert-the-sender-service-to-an-ale-logical-system
/people/ravikumar.allampallam/blog/2005/02/23/configuration-steps-required-for-posting-idocsxi
/people/saravanakumar.kuppusamy2/blog/2005/01/20/configuration-tips-for-a-business-serviceintegration-process-to-send-back-ale-audit-idoc
Thanks ,
Suvarna
Award pts if it helps .

Pass system ack of JDBC adapter to ERP in IDoc - XI - JDBC scenario

Dear all,
i have an IDoc -> XI -> JDBC scenario (without using ccBPM). In the standard way the ERP system, sending the IDoc waits for an application acknowledgement. However the JDBC adapter is only capeable to send system acknowledgements.
Is there a way to pass these acknowledgements to the IDoc status record?
In help.sap.com (http://help.sap.com/saphelp_nwpi71/helpdata/en/ab/bdb13b00ae793be10000000a11402f/frameset.htm) under "IDoc Processing with the IDoc Adapter " there is a table that maps XI system/applic acknowledgement to IDoc status. So in my opinion the status record of my IDoc should at least chenge to the corresponding status for the system ack.
Can anyone tell, if this is really working? What if I deactivate the acknowledgement request in the NOALE programm?
In any case, can I achieve to transfer the system ack to the IDoc status without using a ccBPM?
Many thanks and best regards
Florian

Is there a way to pass these acknowledgements to the IDoc status record?
Without BPM, No.
So in my opinion the status record of my IDoc should at least chenge to the corresponding status for the system ack.
The ack referred here is related to idoc status whether it is properly reached till XI or not and not related to the JDBC ack.
What if I deactivate the acknowledgement request in the NOALE programm?
Then u won't have any ALEAUD message at sender R3.
In any case, can I achieve to transfer the system ack to the IDoc status without using a ccBPM?
No
Regards,
Prateek

Integration server as logical system in IDoc to file scenario

Hi,
Will we configure integration server as logical system in IDoc to file scenario or the RFC destination related to the port will be suffice?
For which logical system will the outbound partner profile configured?
Regards,
Gajendra.

Hello,
I feel that the RFC destination linked to the port is the key here.
Because the scenario (IDoc to File) works in both the cases:
Case 1: Used the logical system as Integration server
Case 2: Used the logical system related to the file (third party) in the SLD.
In both the above cases the RFC destination points to the integration server.
Is this the case that in the XI scenarios (where IDoc are sent) the logical system name in the partner profile is just dummy and has not much significance??
It is the port that matters and once the Idoc reaches XI the routing takes place based on the configuration in ID.
Thanks.
Regards,
Gajendra.

How to suppress the Acknowledgement Error in IDOC to File scenario?

Hi -
I got the status in SXMB_MONI as 'Processed Successfully' for the IDOC to File scenario but the Acknoledgement status throws an error saying 'Acknowledgement not possible'.
I read one of the documents in the forums on how to suppress the acknowledgement using a table on R/3 side using IDXNOALE,
i tried that option but i still get the 'Acknowledgement not possible' error.
Is there any other way to suppress this error?
Thanks,
Tirumal

Hi Tirumal,
Receiver adapters that run on the Adapter Engine support system acknowledgments if they are requested by the sender. Acknowledgements are triggered when a message is successfully processed by the adapter or if an error occurs while it is being processed. Receiver adapters do not support application acknowledgments. The RNIF and CIDX adapters are exceptions to this rule, since they also support scenario-dependent application acknowledgments. Sender adapters of the Adapter Engine do not request any acknowledgments.
This means, JDBC adapter does only send system acks, however IDoc adapter is requesting application acks. Therefore as mentioned by the previous poster, you have to disable acks for this scenario using report IDX_NOALE.
Also go through these documents for any further help:
http://sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/xi-how-to-guides/how to handle acknowledgments for idoc.pdf
http://help.sap.com/saphelp_nw04/helpdata/en/6a/e6194119d8f323e10000000a155106/content.htm
Regards,
abhy

IDoc To JMS Scenario

Similar Messages

Maybe you are looking for