Idoc WHSORD for inbound delivery

Hello,
We want to send inbound deliveries to an external WMS (not SAP WM) by using an output in the inbound delivery.
I tried to use idoc WHSORD (basic type DELVRY01) as for Outbound delivery.
I obtained an error message when processing the output : "The message record of the message control contains a partner role with a partner type LS that cannot be used here. Only the 'KU' and 'LI' partner types are allowed."
<u>Configuration done</u> (same as outbound delivery) :
Output : Medium "6 EDI" / Partner type LS
Partner profile (WE20) : Partner type LS / Partner role LS /Message control : Application E1 / process code DELV.
Finally, I've been able to generate one idoc from the inbound delivery by using medium "A ALE" and partner type LI "vendor". But I need to do it for a LS partner as we do want to maintain partner profile for each vendor.
Is this due to some missing configuration linked to application E1 (i.e allow partner type LS ?) ?
How can we solve this ?
Thanks a lot for your help

Hi zhiqiang,
In order to test inbound idocs, you can use transaction WE19 to create manually idocs.
As pre-requisite, you have to maintain ALE configuration : port and partner profiles.
Then in WE19, you can create an idoc from message type : fill all the fields you need to and delete unuse segments. Then click on "Standard inbound" and your idoc will be received in your SAP system.
Check the status in transaction BD87.
To fill correctlly your idoc :
1. You can find documentation on message type in transaction WE60 (when you go in this transaction, check the documention is "active" => Goto => user settings => "Documentation output" and "field value output" must be ticked)
2. In WE19, for some fields, if you press F4, you will get list of possible values.
Good luck,
JP

Similar Messages

  • Mandatory fields for inbound delivery idocs

    hi all
    i want to generate inbound idocs for inbound delivery ASN
    i am using message type DESADV and idoc type /AFS/DELVRY03
    in order to generate inbound idoc what are mandatory values i have to pass to the idocs
    thanks
    Anil

    HI,
    I created inbound idoc for ASN Inbound delivery in test mode we19
    i got idoc with status 62, when i am trying to process the idoc in bd87, its allowing me
    is there any other way to process the idocs , so that status will be 53
    thanks

  • Create an output for Inbound Delivery

    Hello,
    How do I generate an output (print output or IDoc) when an Inbound Delivery is created in my ECC system using Output Control?
    I need an output to be generated when Inbound Delivery is created/ changed/ deleted.
    What are the standard configurations available to achieve this?
    Thanks and Regards,
    Ashwin Bhat

    Hi,
    Go thru these links:
    [Maintain Output Determination for Inbound Deliveries|http://help.sap.com/saphelp_470/helpdata/en/6f/c5a3f28d7711d5b2c80050dadf6bf7/content.htm]
    [Assigning Output Determination Procedures|http://help.sap.com/saphelp_crm60/helpdata/en/9d/af3e429bc2aa04e10000000a1550b0/content.htm]
    Hope this helps!
    Reetesh

  • SAP System inconsistency for Inbound delivery / MIGO and a "sap note"

    Hello Friends ,
    After following SAP instruction on how to remove the inconsistency between posting GR through MIGO (Inv. mang.) and the reflection of the goods movement status in the inbound delivery document - done that using sap note 570991
    the problem is that the system start behaving in a weird way throwing unjustified Error messages for any suggested goods receipt using MIGO with reference to inbound
    for example after creating an inbound delivery document and trying to post it via migo , an error will pop up
    - Inbound delivery storage location cannot be changed to here Message no. VLA316
    the thing is i didn't even maintain any storage location entry up to that point and yet i cannot post any stock !!
    also another error  like
    - Inbound delivery batch cannot be changed to *** here
    which doesn't make any sense because there is not batches in the inbound document !!
    i think this behavior is coming from the "Document Flow Update for Stock Postings" inbound  indicator  at the shipping parameter at client level customization
    i need help on  how to overcome this annoying SAP Bug/Problem specially i am in a post go live critical situation

    Hi,
       The messages you mentioned were introduced to avoid inconsistency between inbound delivery and IM, through the note:  1050944 - GR for inbound delivery using inventory mgmt as of ECC 6.00
       If the messages are issued incorrectly, then you may check for SAP notes (I couldnt find anything relevant) or raise an OSS ticket to SAP.
    Regards,
    AKPT

  • New Condition TAble for Inbound Delivery

    Hello
    i want to maintain a new Condition table for the Inbound delivery picking with the combination of _Delivery type/Plant
    so that the Inbound created for the particular plant alone uses the particular output type.
    Where in IMG can i configure the new Condition table for this combination for the Inbound delivery ?

    Hi,
    Go to SPRO > Logistics Execution > Shipping > Basic Shipping Functions > Output Control > Output Determination > Maintain Output Determination for Inbound Deliveries > Here perform following;
    - Define Condition Table for Inbound Delivery
    - Define Output Types for Inbound Delivery
    - Define Access Sequence for Inbound Delivery
    - Maintain Output Determination Procedure
    - Assign Output Determination Procedures

  • Issue at the time of creation of transfer order for inbound delivery

    Hello,
    I am facing one issue at the time of creation of transfer order for inbound delivery.
    If I create inbound delivery for purchase order with account assignment as 'M' (Ind. cust. w/o KD-CO), inbound delivery is not updated. Also document flow for inbounde delivery s not updated. I can create N number of transfer orders for on inbound delivery. Need help to resolve issue.
    If I create inbound delivery for purchase order with account assignment other than 'M' (Ind. cust. w/o KD-CO), inbound delivery and document flow is updated.
    Thanks and Regards,
    Nikhil

    Hi
    In OMS2 t-code
    for your material type and  plant ,you have to mark value based and qunaity based updation mark
    Regards
    kailas Ugale

  • Goods Receipt for Inbound Delivery before Transfer Order

    Hello Experts,
    Below is the normal process in case of GR via inbound delivery.
    PO -> Inbound Delivery -> TO -> Confirm TO -> Post Goods Receipt in Delivery.
    My client wants as per the normal Purchase Order cycle as below.
    PO -> Inbound Delivery -> Post goods receipt in Delivery -> TO - > Confirm TO.
    I have found some config for this as per below path.
    Logistics - General -> Handling Unit Management -> Basics -> Delivery -> Define Sequence of Transfer Order - Goods Receipt.
    I have done these settings but still it is not working.
    I have couple of questions here.
    1. Are there some more settings required?
    2. Why SAP has designed this process in such a way for inbound delivery.
    Thanks in advance for your help.
    Navin

    Hi,
    I am working with non HU managed storage location. Can I still use this settings & process for inbound delivery?
    I am stuck with one more question. SAP is not allowing me to create Inbound delivery for QM active materials.
    The message it is saying is ....
    Material CH-1440 1000 cannot be used in inbound delivery because QM is active
    Message no. L9528
    Diagnosis
    QM is active for material CH-1440 in plant 1000. As a result, the material cannot be used in an inbound delivery item because the item is relevant for picking and because WM is active for the item.
    This process is not supported in the current release.
    Procedure
    Execute the putaway using a goods receipt posting with subsequent
    putaway in the Warehouse Management system.
    Can you please help me with this one also?

  • Creation of Transfer Order for Inbound Delivery

    Hi,
    I am using L_TO_CREATE_DN for creation of a TO for Inbound Delivery.
    I am getting this message."""Item 180000166 000010 does not exist or is not relevant for picking"""
    The delivery is having Ware House number so i think it is relevent for picking... It is having an item 10 also. I dont know why this message is coming.
    Can anyone please let me know how to get rid of this error and create a TO for the inbound delivery.
    Regards
    Rakesh

    Hi Rakesh,
        Pad the delivery number with a 0 in front and check.
    like, instead of 180000166, pass 0180000166.
    Regards,
    Ravi

  • Goods Receipt for Inbound Delivery through MIGO

    Hi All,
    Can anyone pl. explain me in steps the process of GR for Inbound Delivery from MIGO transaction.
    Also I need the process of reversing this goods receipt done.
    For certain inbound deliveries a dump occurs in the program SAPLIE01 in 'EQUIPMENT_ADAPT_BUSVIEWS' fn module.
    I need to analyse the reason for the dump. Here is the extract from the dump
    <b>IF WA_EQUI IS INITIAL
      keine Equidaten vorhanden => EXCEPTION
    --->       RAISE ERR_ADAPT_BUSVIEWS . ENDIF.                     </b>                                          
    Advance Thanks

    Hi Sanjay and Srikanth,
    Thank you for the correction. I was just wondering over this number.
    Sanjay, regd the release level, it is 0017 for SAP_APPL.
    In brief, when GR is done for an inbound delivery, a fn moudle equipment_adapt_busviews is called, in which if the equipment data of the material (wa_equi) is initial, it gives dump.
    1. This fn module is called 3 or 4 times while the posting is done through MIGO
    2. In the 4th call, the parameter wa_equi is initial - which gives the dump.
    3. While debugging, when I reach this point,if I restart the debugging, I find that the posting is completed !!!! (so something happening after posting of GR gives the dump)
    4. I have to reverse this GR for replicating the same again.
    Any further clues !!
    Regards
    Aadarsh

  • Function Module / BAPI for Inbound Delivery from Purchase Order

    Hi,
    I need to create an inbound delivery from Purchase Order items and am looking out for some Function Module or BAPI for the same.
    The requirement is that i should be able to specify selected line items from PO for delivery.
    I tried the BDC method for VL31N , but the particular item selection is problem, since by default it shows all the items of PO and i want only selected items.
    Do reply.
    Thanks in advance.

    check these and their documentations.
    BAPI_INB_DELIVERY_CHANGE       Change inbound delivery
    BAPI_INB_DELIVERY_CONFIRM_DEC  BAPI for inbound delivery verification from a decentralized system
    BAPI_INB_DELIVERY_SAVEREPLICA  BAPI Function Module for Replication of Inbound Deliveries
    Regards
    Prabhu

  • Standard IDoc Type for Inbound NonPO Vendor Invoices - FB60

    What should be the perfect standard IDoc Type for Inbound NonPO Vendor Invoice posting. Tcode FB60.
    I found IDoc Type FIDCCP02 but the Function Module 'IDOC_INPUT_FIDCC2' for FIDCCP02 is not released.
    In the same way many other standard function modules like - IDOC_INPUT_ACLPAY, IDOC_INPUT_FIDCCH, IDOC_INPUT_ACC_INVOICE_RECEIPT and few more are not released.
    My question : If at all I have to use standard IDoc Type, Message type and Function module (Released) for Inbound NonPO Vendor Invoices, then what should be the solution from SAP ?
    Thanks,
    Veeru.

    Hi,
    IDOC_INPUT_FIDCC2 for FIDCCP02 works for us in ECC6.0
    If you want Automatic tax calculation functionality using FIDCCP02.. then FIDCC2 is not correct message type for you. In that case you should probably go for :
    Msg: INVOIC
    Basic type: INVOIC02
    FM: IDOC_INPUT_INVOIC_FI
    Process code: INVF
    Thanks,
    Kumar

  • When idoc failes for inbound sales orders then how to trigger a mail notifi

    Hi All,
    When idoc failes for inbound sales orders in SAP then i would like to send an email notificaiton to particular user id. Could you please let me know the settings for this requirement.
    Thanks in advance..

    Closing thread as there are no replies

  • Use WS_DELIVERY_UPDATE_2 for Inbound Delivery HU Update?

    Hello all,
    I have used WS_DELIVERY_UPDATE_2 to successfully update Handling units to Outbound delivery and also perform batch split.
    Can the same FM be used to update Inbound delivery with Handling units. I will be uploading the HU's through excel file.
    Please advice.
    Thanks,
    Subba

    Hi,
    Below is code for Inbound Delivery With HU, it worked for me.
      gs_head-DELIV_DATE = sy-datum.
    gs_head-DELIV_TIME = sy-uzeit.
    gs_item-DELIV_ITEM = p_item1.
    gs_item-MATERIAL = p_matnr1.
    gs_item-DELIV_QTY = p_quan.
    gs_item-UNIT = 'EA'.
    gs_item-PO_NUMBER = p_po.
    gs_item-PO_ITEM = 10.
    APPEND gs_item TO gt_item.
    CLEAR:gs_item.
    CALL FUNCTION 'BBP_INB_DELIVERY_CREATE'
      EXPORTING
        IS_INB_DELIVERY_HEADER = gs_head
      IMPORTING
        EF_DELIVERY            = gv_vbeln
      TABLES
        IT_INB_DELIVERY_DETAIL = gt_item
        RETURN                 = gt_ret1.
    gs_refobj-OBJECT = 03.
    gs_refobj-OBJKEY = gv_vbeln.
    gs_humain-vhilm = p_matnr2.
    GS_HUMAIN-HU_STATUS_INIT = 'A'.
    gs_humain-STATUS = '0010'.
    gs_itempr1-VELIN = 1.
    gs_itempr1-QUANTITY = p_quan.
    gs_itempr1-meins = 'EA'.
    gs_itempr1-matnr = p_matnr1.
    gs_itempr1-werks = p_plant.
    CALL FUNCTION 'PROCESS_HU_INBOUND_DLVRY'
      EXPORTING
        I_HU_ID               = gv_huid (Blank)
        I_NEW_HU              = 'X'
        I_UPDATE_DB           = 'X'
        I_CREATE_HU           = 'X'
        I_REFERENCE_OBJECT    = gs_refobj
        I_HU_HEADER_MAIN      = gs_humain
        I_SAVE_STEP           = 'ITEM'
        I_PACK_ACTIVITY       = 'MAT'
        I_DELIVERY_TYPE       = '7'
        I_PACKING_ACTIVITY    = 'PACK'
        I_PACK_TYPE           = 'MAT'
        IS_ITEM_PROPOSAL      = gs_itempr1
      IMPORTING
        O_HU_REF_ID           = gs_erefid
        O_HU_HEADER           = gt_eheader
        O_HU_ITEMS            = gt_eitem
        O_HU_MESSAGES         = gt_emsg[]
      TABLES
        ET_CREATED_HUS        = gt_ehus[]
      EXCEPTIONS
        INPUT_MISSING         = 1
        NOT_POSSIBLE          = 2
        HEADER_ERROR          = 3
        ITEM_ERROR            = 4
        SERIAL_NR_ERROR       = 5
        FATAL_ERROR           = 6
        OPERATION_FAILED      = 7
        DELIVERY_UPDATE_ERROR = 8
        OTHERS                = 9.
    IF SY-SUBRC EQ 0.
      CLEAR:gs_vekp.
      SELECT SINGLE * FROM vekp INTO gs_vekp WHERE VPOBJKEY = GV_VBELN.
      ls_vbkok_wa-vbeln_vl  = gv_vbeln.
      ls_vbkok_wa-vbeln = gv_vbeln.
      ls_vbkok_wa-VBTYP_VL = 7.
      ls_vbkok_wa-wabuc = 'X'.
      ls_vbkok_wa-spe_auto_gr = 'X'.
      ls_vbkok_wa-kzebu = 'X'.
      lt_verko-exidv = gs_vekp-exidv.
      lt_verko-exida = 'E'.
      lt_verko-magrv = 'YB01'.
      lt_verko-werks = p_plant.
      lt_verko-STATUS = '0010'.
      APPEND lt_verko.
      lt_verpo-venum = gs_vekp-venum.
      lt_verpo-exidv_ob = gs_vekp-exidv.
      lt_verpo-exidv = gs_vekp-exidv.
      lt_verpo-velin = '1'.
      lt_verpo-vbeln = gv_vbeln.
      lt_verpo-POSNR = p_item1 .
      lt_verpo-TMENG = p_quan.
      lt_verpo-VRKME = 'EA'.
      lt_verpo-MATNR = p_matnr1.
      lt_verpo-werks = p_plant.
      APPEND lt_verpo.
      lt_vbpok-vbeln_vl = gv_vbeln.
      lt_vbpok-posnr_vl = p_item1.
      lt_vbpok-vbeln = gv_vbeln.
      lt_vbpok-posnn = p_item1.
      lt_vbpok-pikmg = p_quan.
      lt_vbpok-matnr = p_matnr1.
      lt_vbpok-werks = p_plant.
      lt_vbpok-pstyv = 'ELP'.
      APPEND lt_vbpok.
      lt_repack-SOURCEHU = gs_vekp-exidv.
      lt_repack-DESTHU = gs_vekp-exidv.
      lt_repack-PACK_QTY = p_quan.
      lt_repack-BASE_UOM = 'EA'.
      lt_repack-MATERIAL = p_matnr1.
      lt_repack-PLANT = p_plant.
      lt_repack-DELIV_NUMB = gv_vbeln.
      lt_repack-DELIV_ITEM = p_item1.
      APPEND lt_repack.
      CALL FUNCTION 'WS_DELIVERY_UPDATE_2'
        EXPORTING
          VBKOK_WA               = ls_vbkok_wa
          DELIVERY               = gv_vbeln
          update_picking         = 'X'
          no_messages_update_1   = 'X'
          synchron               = 'X'
          commit                 = ' '
          NICHT_SPERREN_1        = 'Y'
          if_database_update_1   = '1'
          if_error_messages_send = 'X'
        TABLES
          PROT                   = lt_prot
          VERKO_TAB              = lt_verko
          VERPO_TAB              = lt_verpo
          IT_REPACK = lt_repack.
      COMMIT WORK and WAIT.
    Thanks,
    Shankar Darbha

  • BAPI For Inbound Delivery using Purchase Order Number

    Hi All,
    Is there any BAPI for posting Inbound Delivery (VL31N) using Purchase Order as reference.
    thanks
    bobby

    Not sure what it has to do with enhancements and modifications, but there is no such BAPI:
    http://tech.groups.yahoo.com/group/ABAP/message/38307
    http://sap.ittoolbox.com/groups/technical-functional/sap-log-mm/bapi-for-inbound-delivery-creation-and-update-vl31n-1201265
    FYI all BAPIs may be viewed in BAPI transaction.

  • Trigger IDoc DELVRY03 after Inbound Delivery create

    Hi,
    Inbound delivery is created through an Inbound IDoc and I want to trigger an outbound DELVRY03 IDoc when the Inbound Delivery is created.
    How do I trigger this?
    Regards,
    Sneha

    You have to setup output control,let me say one example
    when you create delivery ,then immeditely output type will trigger LD00,you need to set up partner profile ,according to that outbound idoc will trigger.

Maybe you are looking for

  • How do I create an auto reply for one person in my buddy list?

    I want to be able to have an automatic reply to one person in my buddy list whenever they IM me so that i dont have to reply myself. I dont want to block them but i sometimes want to be able to just avoid them and so does anyone know any applescript

  • LaserJet Pro MFP M177FW - Touch Screen not working

    I have a LaserJet Pro MFP M177FW and the touch screen wont work it displays the hp logo and the energy star logo.. all of the buttons are lit up including a red X but touching the screen does nothing the power button works but when it comes back on i

  • PO Creation Using IDOC ORDERS05 - Inbound Issue

    Hi Experts, I am new to the ALE/IDOCs. I am trying to create a PO in one client and trasnferring it to another client using the IDOC extension. I am using Message type ORDERS and Basic type ORDERS05 (Extended). I have craeted Partner Profile for both

  • How to save the files to a USB memory plugged into the EVS-1463RT

    I am trying to collect images with EVS-1463RT by running a vi. The EVS has LV Real Time v13.0.1 installed. The vi runs well and save images to a folder ('C:\Images\') in the development PC. But, when I deploy the vi to EVS-1463RT, the vi cannot find

  • No of days left

    Dear Folks, Here my requirement is I need to create exception base on the following conditons on date fields. if (current date-statistical date) field is >180 then generate Exception. For above I have created a Formual between two date functions for