IDOCs error in Production System

Hi Gurus,
In Production system, there is a CRM oppertunities process chain is running on hourly basis, the data was updated to DSO successfully, but for the past one week it was not updating to further processing InfoCube, there is an error.
error: Idoc Ready to be transferred to application.
Please update me step by step procedure.
Thanks

Hi,
Check the DataSource in RSA3, if it is working fine and able to see the data in RSA3, there is no problem in DS level, then checl the Mappings and any routines in BW for that DS, if this is also fine then check the below options.
See Dumps in ST22, SM21 also.
Check RFC Connection between ECC and BW systems, i.e. RSA1-->Source System->Right Click on Source system and Check.
You must have the following profiles to BWREMOTE or ALEREMOTE users.So add it. Bcoz either of these two users will use in background to get extract the data from ECC, so add these profiels in BW.
S_BI-WHM_RFC, S_BI-WHM_SPC, S_BI-WX_RFC
And also check the following things.
1.Connections from BW to ECC and ECC to BW in SM59
2.Check Port,Partner Profiles,and Message Types in WE20 in ECC & BW.
3.Check Dumps in ST22, and SM21.
4.If Idocs are stuck i.e see the OLTP Idoc numbers in RSMO Screen in (BW) detials tab see in bottom, you can see OLTP Idoc number and take the Idoc numbers and then goto to ECC see the status in WE05 or WE02, if error then check the log else goto to BD87 in ECC and give the Idoc numbers and execute manually and see in RSMO and refresh.
5.Check the LUWs struck in SM58,User Name = * (star) and run it and see Strucked LUWs and select our LUW and execute manually and see in RSMO in BW.
See in SDN
Re: Loading error in the production system
Thanks
Reddy

Similar Messages

Hierarchy loading Error in Production system

Hi All,
I am loading Hierarchy file, the file is there in application server(AL11), in external tab i gave same path. but when i try to load it is showing below Error message.
Invalid entry, hierarchy 0XMK4PVWO05BM4GP5KVEFQ9L4 does not exist.
Diagnosis
Hierarchy 0XMK4PVWO05BM4GP5KVEFQ9L4 does not exist.
Procedure
If the underlying InfoObject supports hierarchies create the hierarchy and try again.
If hierarchies are not supported, select another InfoSource or change the definition of the InfoObject.
That means Hierarchy file problem (OR) In Info package I selected Hierarchy selection problem?
Kidnly help on this issue.
Cheers,
Srikanth.
Edited by: srikanth on Apr 21, 2009 11:49 AM

Is this only happening in your production system? Have you tried loading the hierarchy file to your development or acceptance system?
I've seen this error occur when the authorizations are not set up for loading hierarchies (i.e. maybe they can only be loaded via process chains under the remote ID used for process chains, and not using your own ID). That's why I was suggesting you try to load the same file to your dev and acc systems and see if you get the same error. Sometimes this error is thrown for other reasons and does not really have to do with the file being loaded or the hierarchy missing.
Also, if you're loading from the App Server, double-check that you have the Application Server radio button selected on the tab where you select the file path.
Good luck!

IDOC error in production server

Hi everyone,
I'm getting this error, when users trigger an Idoc:
Error while writing IDoc to file
Message no. EA084
Diagnosis
The IDoc was to be written to file
cocca3301\interface\output_idocs\1120549.txt
That was not possible because no authorization for writing to this file.
Procedure
Please inform your system administration.
Anyone has seen this before? in development and quality servers didn't happen this...
Thanks in advance. Helpful answers will be rewarded.

Not at all, I was talking with basis administrators about this problem for a long time. I'm pretty sure that it's all about folder permission. I think it's a matter of system, not SAP. But they said that's not the problem... I'm not 100% confident with that answer.
But, in order to keep idocs running, i found program RBDAGAIN, that reprocess the failed idocs. I put it into a job every 30 minutes. That solves my problem "temporary", until i solve the real problem.
I advice you to talk with your system administrator and/or basis, and check the group permission for the folder you are trying to put your files. If it works, please let me know.

IDX2 and Idoc metadata in production system

As explained my Michal & SAP note - 767091, I ran program IDX_GET_CONFIG in production, pointed rfc dest to source where the config is located. It loaded the data but the metadata in the tables are pointing to the XI development (DEV) target system port and not production (PRD)landscape....meaning
XI0 sending data to SAPDEV port
XC0 sending data to SAPTST port
XP0 sending Idoc data to SAPPRD port
Now all my entries in xp0 is pointing to SAPDEV port
How do I fix this. I don't want to create a SAPPRD port in XI0 and load metadata from SAPPRD into Xi0...its would not be SOX complaint.
IDoc Adapter: Configuration Data Transfer
 17 Entries for table IDXSLOAD
 0 Entries for table IDXIDOCINB
 1 Entries for table IDXNOALE
 0 Entries for table IDXQUEUE
 9 Entries for table IDXPORSM59
 492 Entries for table IDXIDOCSYN
Please Help!
 4470 Entries for table IDXEDSAPPL
 636 Entries for table IDXEDISDEF

hi,
just like I said you need to do it manually
I gave you note 767091 just to consider
(the note is for system copy not for DEV-PRD)
also Naveen told you the same
you only need to be careful and read what we write
now just delete IDX1 entries in PRD and create new
manually - just like we said
Regards,
michal

Ora-00472 PMON process terminated with error on production system

Hi,
I am getting the above error when I shutdown the database after a power outage. Alert log file shows " ora-00130 Invalid listener address when I bring up the database...." Nothing has changed between prior to the power outage and after that.
RDBMS 9i.
Help please!!
A/A

This is what the listener status shows
Alias                     FINPROD
Version                   TNSLSNR for HPUX: Version 9.2.0.6.0 - Production
Start Date                26-JUL-2010 13:45:15
Uptime                    0 days 2 hr. 9 min. 22 sec
Trace Level               off
Security                  OFF
SNMP                      OFF
Listener Parameter File   /d01/finprod/product/9i/network/admin/listener.ora
Listener Log File         /d01/finprod/product/9i/network/admin/finprod.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROCFINPROD)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=hp3.nfpc.com)(PORT=1521)))
Services Summary...
Service "FINPROD" has 1 instance(s).
Instance "FINPROD", status UNKNOWN, has 1 handler(s) for this service...
Service "FINPROD.nfpc.com" has 1 instance(s).
Instance "FINPROD", status READY, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully

I got the time out error in production system how can i rectity

TYPES : BEGIN OF TY_FINAL_IDEL,
 IEDD(10),
 IEDD LIKE AFRU-IEDD,
 MATNR LIKE AFPO-MATNR,
 AUFNR LIKE AFPO-AUFNR,
 PERNR LIKE AFRU-PERNR,
 BUDAT(10),
 GRUND LIKE AFRU-GRUND,
 MATKL LIKE MARA-MATKL,
 MENGE LIKE MSEG-MENGE,
 PSMNG LIKE AFPO-PSMNG,
 PSAMG LIKE AFPO-PSAMG,
 XMNGA LIKE AFRU-XMNGA,
 STPRS LIKE MBEW-STPRS,
 NETPR LIKE EKPO-NETPR,
 TC LIKE MBEW-STPRS,
 GRDTX LIKE TRUGT-GRDTX,
 ARBPL LIKE CRHD-ARBPL,
 MAKTX LIKE MAKT-MAKTX,
 END OF TY_FINAL_IDEL.
TYPES : BEGIN OF TY_MARA_IDEL,
 MATNR LIKE MARA-MATNR,
 MATKL LIKE MARA-MATKL,
 MATNR LIKE MAKT-MATNR,
 MAKTX LIKE MAKT-MAKTX,
 MENGE LIKE MSEG-MENGE,
 STPRS LIKE MBEW-STPRS,
 NETPR LIKE EKPO-NETPR,
 END OF TY_MARA_IDEL.
TYPES : BEGIN OF TY_AFPO_IDEL,
 AUFNR LIKE AFPO-AUFNR,
 PSMNG LIKE AFPO-PSMNG,
 MATNR LIKE AFPO-MATNR,
 PSAMG LIKE AFPO-PSAMG,
 BUDAT LIKE AFRU-BUDAT,
 ARBID LIKE AFRU-ARBID,
 XMNGA LIKE AFRU-XMNGA,
 GRUND LIKE AFRU-GRUND,
 PERNR LIKE AFRU-PERNR,
 AUFNR LIKE AFRU-AUFNR,
 IEDD LIKE AFRU-IEDD,
 AUFNR LIKE AFRU-AUFNR,
 AUFPL LIKE AFRU-AUFPL,
 APLZL LIKE AFRU-APLZL,
 VORNR LIKE AFRU-VORNR,
 GRDTX LIKE TRUGT-GRDTX,
 END OF TY_AFPO_IDEL.
 TYPES : BEGIN OF TY_CRHD_IDEL,
 OBJID LIKE CRHD-OBJID,
 ARBPL LIKE CRHD-ARBPL,
 AUFPL LIKE V_QAPO-AUFPL,
 VORGLFNR LIKE V_QAPO-VORGLFNR,
 VORNR LIKE V_QAPO-VORNR,
 ARBID LIKE V_QAPO-ARBID,
 END OF TY_CRHD_IDEL.
TYPES : BEGIN OF TY_TRUGT_IDEL,
 SPRAS LIKE TRUGT-SPRAS,
 GRUND LIKE TRUGT-GRUND,
 GRDTX LIKE TRUGT-GRDTX,
 END OF TY_TRUGT_IDEL.
TYPES : BEGIN OF TY_AFRU_IDEL,
 AUFNR LIKE AFRU-AUFNR,
 END OF TY_AFRU_IDEL.
*& VARIABLE DECLARATION *
DATA : R_WERKS LIKE AFRU-WERKS,
 R_MATNR LIKE AFPO-MATNR,
 R_MATKL LIKE MARA-MATKL,
 R_AUFNR LIKE AFPO-AUFNR,
 R_ISDD LIKE AFRU-ISDD,
 R_IEDD LIKE AFRU-IEDD.
*& INTERNAL TABLE DECLARATION *
DATA : IT_FINAL_IDEL TYPE STANDARD TABLE OF TY_FINAL_IDEL WITH HEADER LINE INITIAL SIZE 100 WITH DEFAULT KEY.
DATA : IT_AFPO_IDEL TYPE STANDARD TABLE OF TY_AFPO_IDEL WITH HEADER LINE INITIAL SIZE 100 WITH DEFAULT KEY.
DATA : IT_MARA_IDEL TYPE STANDARD TABLE OF TY_MARA_IDEL WITH HEADER LINE INITIAL SIZE 100 WITH DEFAULT KEY.
DATA : IT_CRHD_IDEL TYPE STANDARD TABLE OF TY_CRHD_IDEL WITH HEADER LINE INITIAL SIZE 100 WITH DEFAULT KEY.
DATA : IT_TRUGT_IDEL TYPE STANDARD TABLE OF TY_TRUGT_IDEL WITH HEADER LINE INITIAL SIZE 100 WITH DEFAULT KEY.
DATA : IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV.
DATA : WA_FIELDCAT_LN LIKE LINE OF IT_FIELDCAT.
DATA : IT_EVENTCAT TYPE SLIS_T_EVENT.
DATA : WA_EVENTCAT_LN LIKE LINE OF IT_EVENTCAT.
DATA : IT_LAYOUT TYPE SLIS_LAYOUT_ALV.
DATA: S_COL_POS TYPE I.
*& SELECTION SCREEN DECLARATION *
SELECTION-SCREEN BEGIN OF BLOCK : BLOCK WITH FRAME.
SELECT-OPTIONS: S_WERKS FOR AFRU-WERKS DEFAULT 'IN01' NO INTERVALS NO-EXTENSION , "Plant
 S_MATNR FOR AFPO-MATNR, "Material Code
 S_MATKL FOR MARA-MATKL NO INTERVALS NO-EXTENSION, "Material Group
 S_AUFNR FOR AFPO-AUFNR, "Order Number
 S_IEDD FOR AFRU-IEDD OBLIGATORY. "Confirmed date for execution finish
*NO INTERVALS NO-EXTENSION
SELECTION-SCREEN END OF BLOCK BLOCK.
AT SELECTION SCREEN *
AT SELECTION-SCREEN ON S_WERKS.
SELECT SINGLE WERKS FROM AFRU INTO R_WERKS WHERE WERKS IN S_WERKS.
IF SY-SUBRC <> 0.
 MESSAGE E001(ZIN01_RDPR).
ENDIF.
AT SELECTION-SCREEN ON S_MATNR.
SELECT SINGLE MATNR FROM AFPO INTO R_MATNR WHERE MATNR IN S_MATNR.
IF SY-SUBRC <> 0.
 MESSAGE E002(ZIN01_RDPR).
ENDIF.
*AT SELECTION-SCREEN ON S_MATKL.
SELECT SINGLE MATKL FROM MARA INTO R_MATKL WHERE MATKL IN S_MATKL.
IF SY-SUBRC <> 0.
 MESSAGE E003(ZIN01_RDPR).
ENDIF.
AT SELECTION-SCREEN ON S_AUFNR.
SELECT SINGLE AUFNR FROM AFPO INTO R_AUFNR WHERE AUFNR IN S_AUFNR.
IF SY-SUBRC <> 0.
 MESSAGE E004(ZIN01_RDPR).
ENDIF.
AT SELECTION-SCREEN ON S_IEDD.
SELECT SINGLE IEDD FROM AFRU INTO R_IEDD WHERE IEDD IN S_IEDD.
IF SY-SUBRC <> 0.
 MESSAGE E005(ZIN01_RDPR).
ENDIF.
IF S_IEDD-LOW IS INITIAL OR S_IEDD-HIGH IS INITIAL.
 MESSAGE E005(ZIN01_RDPR).
 ENDIF.
SELECT SINGLE IEDD FROM AFRU INTO R_IEDD WHERE IEDD IN S_IEDD.
IF SY-SUBRC <> 0.
MESSAGE E006(ZIN01_RDPR).
ENDIF.
START OF SELECTION *
START-OF-SELECTION.
PERFORM SELECT_DATA.
*PERFORM MAIN_DATA.
PERFORM BUILD_FIELDCATALOG.
PERFORM DATA_DISPLAY.
FORM TO SELECT DATA INTO INTERNAL TABLE
FORM SELECT_DATA.
SELECT FAUFNR FPSMNG FMATNR GBUDAT GARBID GXMNGA GGRUND GPERNR GIEDD GAUFNR GAUFPL GAPLZL G~VORNR INTO CORRESPONDING FIELDS OF TABLE IT_AFPO_IDEL
 FROM AFPO AS F
 INNER JOIN AFRU AS G ON FAUFNR = GAUFNR
 WHERE F~AUFNR IN S_AUFNR AND
 F~MATNR IN S_MATNR AND
 G~WERKS = 'IN01' AND
 G~XMNGA <> 0 AND
 G~IEDD IN S_IEDD .
 G~WERKS IN S_WERKS AND
 IF SY-SUBRC <> 0.
 MESSAGE E006(ZIN01_RDPR).
 ENDIF.
IF SY-SUBRC = 0.
SELECT GRUND GRDTX INTO CORRESPONDING FIELDS OF TABLE IT_TRUGT_IDEL FROM TRUGT
 FOR ALL ENTRIES IN IT_AFPO_IDEL
 WHERE GRUND = IT_AFPO_IDEL-GRUND .
ENDIF.
SELECT HOBJID HARBPL IAUFPL IVORGLFNR IVORNR IARBID INTO CORRESPONDING FIELDS OF TABLE IT_CRHD_IDEL
 FROM CRHD AS H
 INNER JOIN V_QAPO AS I ON HOBJID = IARBID
 FOR ALL ENTRIES IN IT_AFPO_IDEL
 WHERE VORGLFNR = IT_AFPO_IDEL-APLZL AND
 ARBID = IT_AFPO_IDEL-ARBID AND
 OBJID = IT_AFPO_IDEL-ARBID .
IF SY-SUBRC = 0.
SELECT BMATNR BMAKTX BSPRAS DMATNR D~STPRS INTO CORRESPONDING FIELDS OF TABLE IT_MARA_IDEL
 FROM MAKT AS B
 INNER JOIN MBEW AS D ON BMATNR = DMATNR
 FOR ALL ENTRIES IN IT_AFPO_IDEL
 WHERE DMATNR = IT_AFPO_IDEL-MATNR AND BSPRAS = 'EN'.
 ENDIF.
END OF SELECTION
DATA : PEDATE(10),
 POSDATE(10).
LOOP AT IT_AFPO_IDEL.
CONCATENATE IT_AFPO_IDEL-IEDD6(2) IT_AFPO_IDEL-IEDD4(2) IT_AFPO_IDEL-IEDD+0(4)
 INTO PEDATE SEPARATED BY '.'.
IT_FINAL_IDEL-IEDD = PEDATE.
 CONCATENATE IT_AFPO_IDEL-BUDAT6(2) IT_AFPO_IDEL-BUDAT4(2) IT_AFPO_IDEL-BUDAT+0(4)
 INTO POSDATE SEPARATED BY '.'.
IT_FINAL_IDEL-BUDAT = POSDATE.
IT_FINAL_IDEL-PERNR = IT_AFPO_IDEL-PERNR.
IT_FINAL_IDEL-MATNR = IT_AFPO_IDEL-MATNR.
IT_FINAL_IDEL-AUFNR = IT_AFPO_IDEL-AUFNR.
IT_FINAL_IDEL-PSMNG = IT_AFPO_IDEL-PSMNG.
IT_FINAL_IDEL-XMNGA = IT_AFPO_IDEL-XMNGA.
IT_FINAL_IDEL-GRUND = IT_AFPO_IDEL-GRUND.
READ TABLE IT_TRUGT_IDEL WITH KEY GRUND = IT_AFPO_IDEL-GRUND.
IT_FINAL_IDEL-GRDTX = IT_TRUGT_IDEL-GRDTX.
READ TABLE IT_CRHD_IDEL WITH KEY VORGLFNR = IT_AFPO_IDEL-APLZL AUFPL = IT_AFPO_IDEL-AUFPL.
IT_FINAL_IDEL-ARBPL = IT_CRHD_IDEL-ARBPL.
READ TABLE IT_MARA_IDEL WITH KEY MATNR = IT_AFPO_IDEL-MATNR.
IF SY-SUBRC = 0.
IT_FINAL_IDEL-MAKTX = IT_MARA_IDEL-MAKTX.
IT_FINAL_IDEL-STPRS = IT_MARA_IDEL-STPRS.
IT_FINAL_IDEL-TC = IT_AFPO_IDEL-XMNGA * IT_MARA_IDEL-STPRS.
ENDIF.
how can i rectify that one
in b5t run fine
but brp i got time_out error
how to rectify
give me a solution ,its very very urgent
Regards
ds
APPEND IT_FINAL_IDEL.
CLEAR : IT_FINAL_IDEL,IT_AFPO_IDEL,IT_MARA_IDEL,IT_CRHD_IDEL.
CLEAR : IT_TRUGT_IDEL-GRDTX,IT_FINAL_IDEL-TC,IT_FINAL_IDEL-MATNR,IT_FINAL_IDEL-MAKTX, IT_FINAL_IDEL-PSMNG, IT_FINAL_IDEL-STPRS.
ENDLOOP.

In your END-OF-SELECTION, you are doing a number of table reads without the binary search option. This will cause the entire tables to be read for each read. Therefore, change this portion of the code to:
DATA : pedate(10),
posdate(10).
SORT: it_trugt_idel BY grund,
 it_crhd_idel BY vorglfnr aufpl,
 it_mara_idel BY matnr,
 loop at it_afpo_idel.
CONCATENATE it_afpo_idel-iedd+6(2) it_afpo_idel-iedd+4(2)
 it_afpo_idel-iedd+0(4) INTO pedate SEPARATED BY '.'.
it_final_idel-iedd = pedate.
CONCATENATE it_afpo_idel-budat+6(2) it_afpo_idel-budat+4(2)
it_afpo_idel-budat+0(4) INTO posdate SEPARATED BY '.'.
it_final_idel-budat = posdate.
it_final_idel-pernr = it_afpo_idel-pernr.
it_final_idel-matnr = it_afpo_idel-matnr.
it_final_idel-aufnr = it_afpo_idel-aufnr.
it_final_idel-psmng = it_afpo_idel-psmng.
it_final_idel-xmnga = it_afpo_idel-xmnga.
it_final_idel-grund = it_afpo_idel-grund.
READ TABLE it_trugt_idel WITH KEY
 grund = it_afpo_idel-grund
 BINARY SEARCH.
it_final_idel-grdtx = it_trugt_idel-grdtx.
READ TABLE it_crhd_idel WITH KEY
 vorglfnr = it_afpo_idel-aplzl
 aufpl = it_afpo_idel-aufpl.
binary search.
it_final_idel-arbpl = it_crhd_idel-arbpl.
READ TABLE it_mara_idel WITH KEY
 matnr = it_afpo_idel-matnr
 BINARY SEARCH.
IF sy-subrc = 0.
 it_final_idel-maktx = it_mara_idel-maktx.
 it_final_idel-stprs = it_mara_idel-stprs.
 it_final_idel-tc = it_afpo_idel-xmnga * it_mara_idel-stprs.
ENDIF.
APPEND it_final_idel.
* CLEAR : IT_FINAL_IDEL,IT_AFPO_IDEL,IT_MARA_IDEL,IT_CRHD_IDEL.
CLEAR : it_trugt_idel-grdtx,it_final_idel-tc,it_final_idel-matnr,
it_final_idel-maktx, it_final_idel-psmng, it_final_idel-stprs.
ENDLOOP.
Rob

Error while extracting the data in R/3 production system,

Hi Team,
We got the following error while extracting the data in R/3 production system,
Error 7 When Sending an IDoc R3 3
No Storage space available for extending the inter 44 R3 299
No storage space available for extending the inter R3 299
Error in Source System RSM 340
Please guide us to fix the issue

It´s very difficult to help you without knowing
- what is going to be transferred
- where you get this error
- system configuration
- actual memory usage
- operating system
- database and configuration etc. etc.etc. etc.
I suggest you open an OSS call and let the support have a look on your system. It´s much easier if one has system access to find out the cause for that problem.
Markus

Stopping idocs coming into XI production system

Hi Frndz,
We have XI production for the maintenance purpose, we have to stop only the idocs coming into and going out of the SAPXI system.
So how to stop the idocs coming into the system keeping SAPXI system running(other traffic related FILE, JDBC, JMS etc....) ???
<removed by moderator>
Regards
Sai Ganesh
Edited by: Mike Pokraka on Jul 24, 2008 1:17 PM

Hi,
Adding to the Michal post, You can also do
If you dont want to Push the Idocs to XI in future means, In R/3 We20--Change the Port( create dummy file port and assign it)
If u want to post the Idocs to Xi means follow Michal Reply
And also In reverse case while posting the Idocs to R/3, change the RFC Destination name in IDoc Receiver Adapter.The messages will be stay in XI in Errored state
Afterwards if u want to push the Idocs From XI to R/3 means, change the RFC Destination name in Idoc receiver adapter and say Restart.
Regards
Seshagiri

Error message while transporting SapScript to productive system

Hi,
I have tried to transport an order sapscript form (modified Medruck) into the productive system. But I got errors in transaction stms.
The error message is displayed like this:
R3TRFORMZMEDRUCKN was repaired in this system
Message no. TW 104
Diagnosis
Object R3TRFORMZMEDRUCKN is in repair status. Therefore, it cannot be imported.
System Response
The object is not imported.
Procedure
If you still want to import the object, release the relevant repair andrepeat the import.
Does anybody know something about that problem?
Cheers

Hi,
maybe somebody has already create your form in the productive system. Now you would like to create something already created.
Maybe, you have to check in the TADIR table (key R3TR / FORM / name of the form) if the form already exist. What is the system source for the form. (in the PROD)
And finaly, you can go to the SE03, select the first line and execute (to find object R3TR FORM ..) in all the request order. That will show you who has play with this form, and if a request was lost between DEV & PROD. (in the DEV)
Rgd
Frédric
Message was edited by: Frédéric Girod

Error while transporting ADDRESS to production system

Hi all,
We are in the process of a new rollout and we have created new plants and company codes. the same have been transported to quality and pre-production systems without any issues. however when we transport the same to Production, we face an error
The object TDAT ADDRESS_4.6 has not yet been imported successfully into client 100
The object
R3TR TDAT ADDRESS_4.6*
has not yet been imported into client 100 without error.
the objects are getting transported with same address number as in development which in production points to a different address.
as far as i know the system should generate a new address number and assign it to the object during transport.
Any suggestion wud be great

the log is
 Post-import methods for change/transport request: MEDK909182
 on the application server: ITMISAPGW2
 Post-import method AFTER_IMP_CUST_ADDRESS started for ADDRESS_4.6 T, date and time: 20090714144548
 Post-processing taking place in client 100
 The object TDAT ADDRESS_4.6 has not yet been imported successfully into client 100
 The object TDAT ADDRESS_4.6 has not yet been imported successfully into client 100
 The object TDAT ADDRESS_4.6 has not yet been imported successfully into client 100
 Post-import method AFTER_IMP_CUST_ADDRESS completed for ADDRESS_4.6 T, date and time: 20090714144548
 Post-import methods of change/transport request MEDK909182 completed
 Start of subsequent processing ... 20090714144547
 End of subsequent processing... 20090714144548
 Execute reports for change/transport request: MEDK909182
 on the application server: ITMISAPGW2
 Reports for change/transport request MEDK909182 have been executed
 Start of................ 20090714144548
 End of.................. 20090714144548
 Execution of programs after import (XPRA)
 End date and time : 20090714144548
 Ended with return code: ===> 8 <===
regards,
Tarun
Edited by: Tarun Bahal on Jul 16, 2009 9:41 PM

Error while posting idoc in the receiving system.

i have processed idoc in the same system( sending and receiving idoc in the same system ) by creating a dummy logical sys and uploading a text file for customer details.The outbound processing is succesful and it shows a status message 3. But duriing the inbound processing it shows status as 51 with error as 'ENTER VALID VALUE'. but when testing using we19 it is posted sucessfully without any error..is there anything that i have to configure to process inbound idoc sucessfully?? can any suggest me the correct method for doing this.. suggestions please..
thanks
vidya sagar

Hi,
you need to make sure that in WE20 inbound processing parameters for you LS is maintained propperly. You need to give correct function module and enter whether IDoc should be processed immediately or IDocs should be collected and processed as batch. Also you may check whether the distribution model (BD64) is maintained correctly for the specific message type in the system for inbound processing.
Regards,
Kai

Sales Order Error Message 'Product does not exist in system'

Hi Gurus,
we recently upgraded from CRM 4 to 7.0. There is a ECC attached (which was also upgraded from 4.7 to 6.0 before).
Scenario: materials are replicatd from ECC to CRM. All mandatory customizing objects were initially loaded succesfully.
Because of the upgrade we already have "old" products in CRM. We requested a single product from ECC, the bdoc went through with green. The product can be found via commpr01 and also on database in comm_product. But when try to add the product to an sales order e.g. quotation, it gives the error message "product does not exist in the system.
We then tried to delete that product using the report com_product_delete_single. When entered the selection criteria for that report, we used the f4-valuehelp to enter the product. We found the product and then executed the report. But gives the message 'product not found'.
We also created a product for testing purposes directly in crm, but it shows the same behaviour in sales orders and for the deletion report.
Please help me with that issue. Your help will be highly appreciated!!!
Kind regards
Hannes

Solved with the help of SAP.
Keywords: COM_PRODUCT
COM_PRODUCT_GUID_GET_INTERNAL
CONVERSION_EXIT_PRID1_INPUT
CRM_ORDERADM_I 501
Relevant notes:
Note 1449146 - Dump While Creation IP via WebUI
Note 1445079 - Unable to add products to contract
The notes do not exactly described our issue but the code corrections were still relevent for us.

Error in target system : iDOC -XI-iDOC

We are getting this error in smq2 when we are processing bulk idocs thru XI "Error in target system " . The setting on receiving system is trigger by background program .
Manish

Hi Manish,
If so, can you control the number of idocs sending to XI box. This is workaround
Is this may be because of number of work process . I am not sure here. So you can increase the work process.
But you can seek help from SAP to audit on this provided if you are able to reproduce the error..
This is just my views~
Regards,
moorthy

Error In Production XI system URGENT

Hi Experts,
Its very URGENT.
I have one problem in Production XI system.
we have one interface which is running fine for india.
In this they are using multi mapping to split the messages according to the company codes and are sending to the same FTP server ie INDIA.
Here in the input file have only INDIA data.( Initially there is no BPM in this interface) .
Now they are sending UK and INDIA data in the same input file.
Now we need to send UK data to UK FTP server and INDIA data to INDIA FTPserver.
For this we have used BPM to route the messages.
NOw in receiver determinaion we have configured two receivers one for UK data and also we have used XPath condition to the UK company codes.
If no records are with the UK data then it has to route to the INDIA FTP server.
For this we have used that if NO receiver found then it has to continue message processing with the INDIA FTP server ( Here at RCVR Detemination we have used 3rd radio button).
Plz help me its URGENT.
Points shouldbe rewarded
regards
sreeni

Continue for the ABOVE message.
Here We got one error, that in the 3rd radio button at RCVR Determination in production system, QA and Integration system also the same business system BSD_XX is coming.
But actually it is as follows.
INT--> it sholud be BSI_XX
Qa--> it sholud be BSQ_XX
Prod--> it sholud be BSP_XX
plz keep posting to clarify this issue.
thanks in advance
regards
sreeni

IDOC error - same client same system

Hi guru,
i have a requiremnt to generate the IDOC for the same and same client. actually i have to get the data from application server and i have to generate the IDOC.
for this i have created a Zreport and passed the data from application server to segment and i called the
FM "MASTER_IDOC_DISTRIBUTE". after executing the Zreport, IDOC is generated and show the error
status as 29.i.e. Receiver of IDoc is its own logical system.
my logic is as follows.
MOVE 'LS' TO w_edidc-rcvprt.
MOVE 'SBECLNT130' TO w_edidc-rcvprn.
MOVE 'ISU_MR_UPLOAD' TO w_edidc-mestyp.
MOVE 'ISU_MR_UPLOAD01' TO w_edidc-idoctp.
pls let me know the solution for this problem.
Regards,
Balu

Hi,
To send an IDoc from the SAP system to the external system, you must define outbound parameters for the message type and all relevant partners. This is valid even if your receiving system is same as sending systems.
For more information, see Interfaces ® External Systems ® Configure Warehouse Management ® Communication R/3 -> External System ® Maintain Partner Profile in the Implementation Guide for Warehouse Management.
If the system cannot find the partner (that is, the connected partner system) for sending the IDocs, proceed as follows:
Define the missing partner profile.
Resend all existing IDocs, which the system has not yet been able to send.
What is the partner profile of your system ?
Check your partner profiles in WE20 and maintain your message type in Outbound and Inbound parameter for the system.
KR Jaideep,

IDOCs error in Production System

Similar Messages

Maybe you are looking for