IDOCS in 03 status - Transfer Idoc Immediately?
How do I get these to process in SAP so they can be sent to XI?
Thank-You! Looks like it was trying to send to XIP-prod not XIQ-QAS. We are integration testing and we had a refresh last week of prod to QAS that is probably the issue.
Thanks Again!
Similar Messages
-
IDOC status 30 even if I set transfer IDoc immediately in we20
Hi All,
I am creating Bommat IDocs using 'MASTER_IDOC_DISTRIBUTE' .I am getting the 30 status instead of getting status 3.
Even if I set transfer IDoc immediately in we20.
Please let me know how to resolve this.
Thanks,
Vinay.Hi Vinay parakala
Schedule back ground job to program RSEOUT00 regularly to process the 30 status idoc....
Your program generates the idoc ... and RSEOUT00 will process you idocs which are in 30 status...
i hope above info helps you
Note: enter Message type BOMMAT in program RSEOUT00
Thanks
Ramesh -
Idoc not recive while sending using program & SEND IDOC IMMEDIATELY in we20
<b>i am sending idoc using program</b> - with function master dat distribute function,
now if i set SEND IDOC IMMEDIATELY in outbound message in we20 'partner profile' than idoc get status 03 but at reciver end idoc not found with any status.
if select collect idoc immideatly than work properly.
what precaution needed while sendig idoc throug send idoc immideatly with Program,
regards,
r p.Hi rp,
when using SEND IDOC IMMEDIATELY in outbound messge, the packet size should be 1 and use start subsystem option.
Thanks,
Rajeev Gupta
Message was edited by:
RAJEEV GUPTA -
Possible to trigger HRMD_A IDoc immediately
Hi experts,
Can you please let me know if it is possible to trigger an Outbound HRMD_A IDoc immediately i.e. as soon as someone creates a new record for any of the infotypes associated with this IDoc the IDoc is sent; without having to schedule PFAL or BD21.
Thanks and regards,
BrendonCan you please let me know if it is possible to trigger an Outbound HRMD_A IDoc
immediately i.e. as soon as someone creates a new record for any of the infotypes
associated with this IDoc the IDoc is sent; without having to schedule PFAL or BD21.
Well I think some confusion out here, PFAL or BD21 does not have any control on when the IDOC
is sent they will just read the infotype data and create IDOCs. WE20 Partner Config has got the
setting to tell system whether COLLECT the IDOCs in ready state or dispatch as soon as they
gets creates (PFAL/WE21) Without scheduling BD21/ PFAL you will not have IDOCs itself
triggering comes later.
Hope this clarifies. -
Program/task which created Transfer order immediately
Hello All,
I want to create transfer order immediately after quality usage decision (QA32/QA11), movement type-321. I have done the required settings in WM-IM interface to create transfer order immediately and it is working perfectly fine.
Now my requirement is, I want to specify source bin by my own logic in transfer order. So can anyone guide me, how I can find which background program or job or FM or tcode gets called for immediate transfer order creation.
BR
KamalHi Kamal
you can ask your developer to use below mentioned user exit
MWMTO001 Update own data after TO creation
Since you are doing Quality decision which means transferring the stock from Quality to unrestricted i hope the FM being called will be
L_TO_CREATE_POSTING_CHANGE to create the transfer order -
Hi,
I am trying to create activities in CRM 5.0 using CRMXIF_ORDER_SAVE message type(via LSMW). But I am unsuccessful in creating user statuses and results for it.
all customizing is set up properly - to my assessment
What segments of th eaforementioned message should be used for status transfer? I am using Subject(fields - catalog, code group and code) and Status(fields filled - object status, field named "txt04" with reason in it, active) segments so far.
Can u pinpoint any fields that should defenitely be filled or segments that shuld be used in order to tranfer statuses and results successfully???
Thanks!Hi,
We are creating quotation ZPQT in CRM which is then get replicated to ECC on saving it on “Accepted” status. In ECC we then create sales order of type ZPOR. Sales order gets replicated in CRM and also updates document flow. This sales order is called as “Project Sales Order”. PS team assigns WBS element to this order and does billing later on. Upon billing document is created sales order status in ECC changes to “Completed”. This is system status. But the issue is status of order ZPOR is CRM remains in status “Inprocess”. We want it to change to “Completed”.
We have similar scenario with order type ZOR. In this order after delivery and billing ECC assigns status “Completed” to sale order and same gets replicated to CRM.
In CRM for user status Completed we have assigned system status as FINI. Both ZPOR and ZOR has same status profile assigned at header and item level.
Our concern is if status is changing back in CRM for ZOR then why not for ZPOR. What is stopping system to do so? -
Which invoice validation status transfer to next period or future period.
Dear All
can any one explain which invoice validation status transfer to next period or future period.
The validation status can be 1) Validated 2) Needs revalidation 3) cancelled 4) Approved 5) never validated.
can i know which validation status moves to next open period and which can be to future open period.
Regards
Shaizy
Edited by: user11298424 on 10 Aug, 2012 2:51 AMHi ,
I have run the query given by you. it shows Y for posted. but when I query JE_BATCH_ID from AP_INVOICE_DISTRIBUTIONS_ALL, it shows null JE_BATCH_ID.
How can I get corresponding GL Batch and journals for these invoices?
JE_BATCH_ID ACCOUNTING_DATE PERIOD_NAME POSTED_FLAG ACCRUAL_POSTED_FLAG
3/28/2012 MAR-12 Y Y
3/28/2012 MAR-12 Y Y
3/28/2012 MAR-12 Y Y
3/28/2012 MAR-12 Y Y
3/28/2012 MAR-12 Y Y
3/28/2012 MAR-12 Y Y
3/28/2012 MAR-12 Y Y
3/28/2012 MAR-12 Y Y
3/28/2012 MAR-12 Y Y
3/28/2012 MAR-12 Y Y
3/28/2012 MAR-12 Y Y
3/28/2012 MAR-12 Y Y
3/28/2012 MAR-12 Y Y
3/28/2012 MAR-12 Y Y
3/28/2012 MAR-12 Y Y
3/28/2012 MAR-12 Y Y
3/28/2012 MAR-12 Y Y
3/28/2012 MAR-12 Y Y
3/28/2012 MAR-12 Y Y
3/28/2012 MAR-12 Y Y
3/28/2012 MAR-12 Y Y -
Print Transfer Order Immediately
Hi,
We are creating a transfer order immediately in background with the posting of every material document.
Along with TO , we would also like to print TO immediately based on movement type.
Could anybody please help with the configuration for immediate TO print.
Regards
KaranHi Karan,
In setting Logistic Execution> WM>Interface>Inventory mgt>Define mvt type, Set link for IM movement type to WM referance movement type. Next setting .."LE-WM interface to IM", here set link among Warehouse no. referance movement type to WM movement type, here set indicator for create TO immediatly to "A" . Prerequisites for this is WM movement types are configured.
To have TO print, OMLV configuration needs to be done. Assign print code to movement type. Assign forms ( standered or customised) to print code, assign correct spool code here. Assign printer to warehouse movement.
Hope this will help.
Regards,
Sudhir -
Problem with automatic sending of IDOC immediately
Hi guys,
We are having probme with IDOC that is not being sent immediately... it is configured to send immediately, however it is sitting in Status 30...
Is there anything wrong with it? Is there any workflow that was not activated?
Thanks a lot!
Rgds,
markI think the processing mode in partner profiles is still set to "Collect IDocs" then IDocs will be in status 30 on creation and have to be dispatched to the receiver via a scheduled program using i.e. RESOUT00. please check the RESOUT00 is scheduled in the background?
This program would change the status of the IDocs from 30 to 03.
a® -
Process IDOC immediately Problem
Hello,
Have this problem where we have a partner profile set where we use a bespoke message type and the message type uses process code ORDE (we have the trigger immediately radio button on).
We get inbound orders coming into SAP and stopping at status 64 this has only started in the last month or so and as a result and seems weird because the trigger immediately was working fine, as part of the inbound order processing we are using the function module EDI_DATA_INCOMING
has anyone else encounter problems using either EDIE_DATA_INCOMING lately ? or Docs stopping at status 64
Regards,
Conor.hi,
we have ever encountered problem that process job not started, checking with sm37 job 'BI_PROCESS_TRIGGER' or 'BI_PROCESS_DROPINDEX' has status 'scheduled' and can't be changed, message job incomplete something... after authorization granted, and run again process chain works fine.
try to check the job 'BI_PROCESS_DROPINDEX'. -
User status transfer for sales orders from ECC to CRM
Hi,
We use business process with CRM sales orders that are transfer to ERP.
Users can change user status in the sales orders in ERP.
How we can replicate custom user status from ECC Sales Order to CRM Sales Order?
What is the steps to do this for CRM 7.0?
DenisHi,
We are creating quotation ZPQT in CRM which is then get replicated to ECC on saving it on “Accepted” status. In ECC we then create sales order of type ZPOR. Sales order gets replicated in CRM and also updates document flow. This sales order is called as “Project Sales Order”. PS team assigns WBS element to this order and does billing later on. Upon billing document is created sales order status in ECC changes to “Completed”. This is system status. But the issue is status of order ZPOR is CRM remains in status “Inprocess”. We want it to change to “Completed”.
We have similar scenario with order type ZOR. In this order after delivery and billing ECC assigns status “Completed” to sale order and same gets replicated to CRM.
In CRM for user status Completed we have assigned system status as FINI. Both ZPOR and ZOR has same status profile assigned at header and item level.
Our concern is if status is changing back in CRM for ZOR then why not for ZPOR. What is stopping system to do so? -
Smart-Collection (metadata status) not updated immediately
Hi
I created a smart-collection that matches photos where their metadata status has changed on file system. So I changed the date with ExifToolGui (*click*). Closed the ExifTool and waited in LR 5.6 to see the smart-collection populated. But nothing happens. Photos only were added to this collection if I navigated to them in the library. Only the visible ones were added, so if I scrolled down, more photos were added. That's not really useful. And now, not even with navigating to them will put them in to that collection.
Other smart-collection for metadata changes in LR works like a charme.
Restarting LR doesn't help.
Windows 8.1 64bit
Does someone have an idea or can reproduce that behavior?Try this:
- In the left-hand Catalog pane, select All Photographs.
- Do Edit > Select All to select all photos.
- Do Library > Find All Missing Photos.
When I had somewhat related issue with slow update of metadata status, that command seemed to sometimes speed it up. -
IDOC status at 30, but in we05 it is 03
Hello Gurus!!
My program generates an IDOC and as soon as the idoc is generated it the status is 03 then i have todo something else.
Within the program when i am cheking the status is 30 but actually in transaction we05 the status is 03.
I have cheked the partner profiles and transfer_idocs_immeadiately has already been selected.
I have already gone thru the forum but no valid solution was given,
There is no need to change any ALE configurations / port configurations because everything just work fine. It is only that within the program i am not able to catch the status 03. the proram is not waiting untill the idoc status is 03. it is capturing only the status 30.
Is there any thing that i can do within the program? should i capture the idoc number and then check the idoc status from EDID4?
Please answer o this questions ASAP.
Regards.Initially when you create the outbound idocs then status is 30. then you have to run the program RSEOUT00 to process the idoc then after the processing the status changes to 03.
But the Program RSEOUT00 is optional. In the partner profile (WE20) If you select the option 'Collect Idocs', then you have to schedule the program RSEOUT00 to process the Idocs otherwise if you have choose the option 'Transfer idoc immediately', you don't need to do anything.
Thanks,
Srinivas -
STPPOD Idoc creation status : Error in ALE Service
Experts,
I am trying to send GR from MM to SUS in MM-SUS Classic Scenario on ECC 6.0 Server. I have also configured Goods REceipt Notifications Functionality to sending GR from MM to SUS.
When i am trying to send GR Idoc is generated (STDPOD) but i am getting the Error whose status - 29 in WE02 t-code :
Status Message for Selected IDoc
Status Text: IDoc: 0000000000211243 Status: Error in ALE service
T100 Text: Entry in outbound table not found
While i have properly configured Partner Profile for Message Type STPPOD :
Partner Role Basic Type Receiver Port Application Output Mode
LS DELVRY03 A000000018 (XI port) GRN Transfer Idoc Immediately
When i try WE19 t-code for this idoc, i found the error "Port '' does not exist in the table of port descriptions"
while i have already defined port (A000000018)in WE21 t-code and this port also working fine for other messages.
Please suggest.
Thanks.
Regards,
Pawan KeshwaniNikhil,
Issue is resolved it was the wiered error. As i removed LS from the field Partner Role in STPPOD message at partner profile(WE20) for SUS Client in ECC. Now the message STPPOD outbound message working fine.
Thanks.
Regards,
Pawan Keshwani -
Want to transfer data via idocs from one R/3 to different R/3
Hi!!
May i hav nay step by step pdf which gives the complete flow of how to transfer idocs from from one R/3 to different R/3.
Though i have the basics steps but some where I m stuck.
Also I have two doubts::
1.Is thr Any relation bw port name and Logical System name?Can they be same.??I hav kept Logical System name as SAPE60 AND PORT name also as SAPE60(in e60) and SAPEI6(in ei6) servers respectively.
2.Should the Logical System names be maintained same in both the servers??
Kindly respond .
Helpful answers will be rewarded points!!!Hi Deepika ,
See the Example scenarios
MASTER DATA TRANSFERMATION BETWEEN 2 DIFF CLIENTS
For this scenario Client 800 is the Sender and 810 is the receiving system
1. Creating Logical Systems
o Login using 800 client
o Go to T. Code SALE
o Expand Sending and Receiving Systems
o Expand Logical Systems
o Click on Define Logical System
o Click on New Entries
o Create STUD_S, STUD_R Logical Systems
o Save and come back
o Assign the STUD_S Logical System to client 800
o Assign the STUD_R Logical System to client 810
2. Creating the RFCs
o Go to T. Code SM59
o Expand R/3 Connections
o Enter RFC Name as STUD_S
o Connection Type as 3
o Language as EN
o Client as 800
o User as SAPUSER
o PWD as abap
o Target host as sap
o Click on Remote logon button to test the RFC
o Enter RFC Name as STUD_R
o Connection Type as 3
o Language as EN
o Client as 800
o User as SATISH
o PWD as abap
o Target host as sap
o Click on Remote logon button to test the RFC
3. Creating the Message Type
o Go to T. Code WE81
o Click on change, continue
o Click on New Entries button
o Give message type as ZBAPI_STUD_MAS and description
o Save and back
4. Creating the Segment
o Go to T. Code WE31
o Give segment name as ZBAPI_STUD_SEG
o Enter Short Text
o Enter the Field Name and Data Element in the text boxes
o Save, continue,
o Click on Edit -> Set Release.
5. Creating the Basic IDOC Object
o Go to T. code WE30
o Give obj. name as ZBAPI_STUD_IDOC
o Click on create
o Select create new radio button, give description and continue
o Select the IDOC obj name and click on create button
o Enter the segment name which is create earlier
o Select the check box if you want to make the segment mandatory
o Enter 1 in minimum number 99999 in maximum number, continue
o Save and back
o Click on Edit -> Set Release
6. Creating Customer Distribution Model
o Go to T. Code BD64
o Click on change and Create model view button
o Enter the short text and Technical name as ZSTUDENT
o Select the model and click on Add Message Type Button
o Give the Sender as STUD_S,
o Receiver as STUD_R,
o Message Type as ZBAPI_STUD_MAS
o Select the model view & click on Environment -> Generate Partner Profiles
o Select Transfer IDOC Immediately and Trigger Immediately radio buttons
o Click on Execute
o You should get a list in green color which means it executed successfully.
o Back to main screen, select the model view
o Click Edit->Model view->Distribute
o Click on continue
o You should get a list saying model view is distributed successfully.
7. Checking the Port
o Go to T. Code WE21
o Expand Transactional RFC
o Find the port from the list which is created using BD64 for STUD_R (Receiving system) RFC Destination.
8. Checking the Partner Profiles.
o Go to T. Code WE20
o Expand Partner Type LS
o Select the Partner profile STUD_R
o Double click on Message Type ZBAPI_STUD_MAS in Outbound parmtrs.
o Check Receiver Port is assigned correctly
o Check the Basic type as your Basic IDOC object.
9. Assigning the Message Type to Basic IDOC Object
o Go to T. Code WE82
o Click on Change & continue, New Entries button
o Give the Message type as ZBAPI_STUD_MAS
o Give Basic Type as ZBAPI_STUD_IDOC
o Release as 46C
o Save and back
10. Creating Inbound Function Module (Posting Program)
o Go to T. Code SE37
o Create a function Module IDOC_INPUT_ZBAPI_STUD_MAS
o Set the Processing type as Remote Enabled Module and mode as start immed, in Attributes Tab.
o Import Parameters
INPUT_METHOD LIKE BDWFAP_PAR-INPUTMETHD
MASS_PROCESSING LIKE BDWFAP_PAR-MASS_PROC
NO_APPLICATION_LOG LIKE SY-DATAR
MASSSAVEINFOS LIKE MASSSAVINF
o Export Parameters
WORKFLOW_RESULT LIKE BDWF_PARAM-RESULT
APPLICATION_VARIABLE LIKE BDWF_PARAM-APPL_VAR
IN_UPDATE_TASK LIKE BDWFAP_PAR-UPDATETASK
CALL_TRANSACTION_DONE LIKE BDWFAP_PAR-CALLTRANS
o Tables
IDOC_CONTRL LIKE EDIDC
IDOC_DATA LIKE EDIDD
IDOC_STATUS LIKE BDIDOCSTAT
RETURN_VARIABLES LIKE BDWFRETVAR
SERIALIZATION_INFO LIKE BDI_SER
o Exceptions
WRONG_FUNCTION_CALLED
o Source Code
DATA: FIRST_TRANC LIKE MARA_UEB-TRANC,
ZBAPI_STUD_SEG like zbapi_stud.
DATA: ZBAPI_STUD LIKE ZBAPI_STUD.
DATA: I_ZBAPI_STUD LIKE ZBAPI_STUD.
DATA: C_TRUE VALUE 'X'.
DATA: C_FALSE VALUE ' '.
DATA: BEGIN OF T_IDOC_ROLLNO OCCURS 0,
DOCNUM LIKE EDIDC-DOCNUM,
ROLLNO LIKE ZBAPI_STUD-ROLLNO,
END OF T_IDOC_ROLLNO.
DEFINE APPEND_RESFIELDS.
PERFORM APPEND_RES_FIELDS TABLES T_MFIELDRES
T_RES_FIELDS
USING &1
COUNTER-D_IND.
END-OF-DEFINITION.
DATA: I_MARA_UEB LIKE MARA_UEB.
DATA: I_ZSTUD_UEB LIKE ZBAPI_STUD.
DATA: I_MAKT_UEB LIKE MAKT_UEB.
DATA: I_MARC_UEB LIKE MARC_UEB.
DATA: I_MARD_UEB LIKE MARD_UEB.
DATA: I_MFHM_UEB LIKE MFHM_UEB.
DATA: I_MARM_UEB LIKE MARM_UEB.
DATA: I_MEAN_UEB LIKE MEA1_UEB.
DATA: I_MBEW_UEB LIKE MBEW_UEB.
DATA: I_STEU_UEB LIKE STEU_UEB.
DATA: I_STEUMM_UEB LIKE STEUMM_UEB.
DATA: I_MLGN_UEB LIKE MLGN_UEB.
DATA: I_MLGT_UEB LIKE MLGT_UEB. " //br010797 neu zu 4.0
DATA: I_MPGD_UEB LIKE MPGD_UEB.
DATA: I_MPOP_UEB LIKE MPOP_UEB.
DATA: I_MVEG_UEB LIKE MVEG_UEB.
DATA: I_MVEU_UEB LIKE MVEU_UEB.
DATA: I_MVKE_UEB LIKE MVKE_UEB.
DATA: I_MPRW_UEB LIKE MPRW_UEB.
DATA: I_LTX1_UEB LIKE LTX1_UEB.
DATA: HELP_MARC_UEB LIKE MARC_UEB.
DATA: T_MARA_UEB LIKE MARA_UEB OCCURS 0.
DATA: T_MAKT_UEB LIKE MAKT_UEB OCCURS 0.
DATA: T_MARC_UEB LIKE MARC_UEB OCCURS 0.
DATA: T_MARD_UEB LIKE MARD_UEB OCCURS 0.
DATA: T_MFHM_UEB LIKE MFHM_UEB OCCURS 0.
DATA: T_MARM_UEB LIKE MARM_UEB OCCURS 0.
DATA: T_MEAN_UEB LIKE MEA1_UEB OCCURS 0.
DATA: T_MBEW_UEB LIKE MBEW_UEB OCCURS 0.
DATA: T_STEU_UEB LIKE STEU_UEB OCCURS 0.
DATA: T_STEUMM_UEB LIKE STEUMM_UEB OCCURS 0.
DATA: T_MLGN_UEB LIKE MLGN_UEB OCCURS 0.
DATA: T_MLGT_UEB LIKE MLGT_UEB OCCURS 0. " //br010797 neu zu 4.0
DATA: T_MPGD_UEB LIKE MPGD_UEB OCCURS 0.
DATA: T_MPOP_UEB LIKE MPOP_UEB OCCURS 0.
DATA: T_MVEG_UEB LIKE MVEG_UEB OCCURS 0.
DATA: T_MVEU_UEB LIKE MVEU_UEB OCCURS 0.
DATA: T_MVKE_UEB LIKE MVKE_UEB OCCURS 0.
DATA: T_MPRW_UEB LIKE MPRW_UEB OCCURS 0.
DATA: T_LTX1_UEB LIKE LTX1_UEB OCCURS 0.
Internal fields/ tables
DATA: FLAG_ERROR_HAPPENED.
DATA: flag_material_exists. "//br210397 zu 4.0 keine Verwendung mehr
DATA: FLAG_EXIT_TO_BE_DONE.
DATA: HELP_TABIX LIKE SY-TABIX.
DATA: HELP_TRANC LIKE MARA_UEB-TRANC.
DATA: HELP_ALAND LIKE STEU_UEB-ALAND.
DATA: HELP_VKORG LIKE MVKE-VKORG.
DATA: HELP_WERKS LIKE T001W-WERKS.
DATA: HELP_LFDNR LIKE STEU_UEB-LFDNR.
DATA: LAST_MARC_TRANC LIKE MARA_UEB-TRANC.
DATA: LAST_MLGN_TRANC LIKE MARA_UEB-TRANC. " //br010797 neu zu 4.0
DATA: LAST_TEXT_TRANC LIKE MARA_UEB-TRANC.
DATA: CURRENT_TABIX LIKE SY-TABIX.
DATA: GENERAL_SUBRC LIKE SY-SUBRC.
DATA: HELP_FACTOR TYPE P DECIMALS 3.
DATA: USER_SEGMENTS LIKE EDIDD OCCURS 0 WITH HEADER LINE. " insert
DATA: CUST_SEGMENT LIKE EDIDD.
DATA: I_MFIELDRES LIKE MFIELDRES.
DATA: I_MERRDAT LIKE MERRDAT.
DATA: I_EDIDD LIKE EDIDD.
" //br neu zu 3.1g
DATA: T_RES_FIELDS LIKE DELFIELDS OCCURS 0 WITH HEADER LINE.
DATA: T_MFIELDRES LIKE MFIELDRES OCCURS 0.
DATA: T_MERRDAT LIKE MERRDAT OCCURS 0.
DATA: T_EDIDD LIKE EDIDD OCCURS 0.
DATA: BEGIN OF t_matnr OCCURS 0, "//br210397 zu 4.0
matnr LIKE mara-matnr, " wird nicht mehr verwendet
END OF t_matnr. "
DATA: BEGIN OF COUNTER,
TRANC LIKE MARA_UEB-TRANC,
D_IND LIKE MARA_UEB-D_IND,
END OF COUNTER.
DATA: BEGIN OF t_idoc_tranc OCCURS 0, " 4.0
docnum LIKE edidc-docnum, "
tranc LIKE mara_ueb-tranc, "
END OF t_idoc_tranc. "
DATA T_IDOC_TRANC LIKE MATIDOCTRANC OCCURS 0 WITH HEADER LINE."
DATA: FLAG_FITS.
DATA: APPLICATION_SUBRC LIKE SY-SUBRC.
DATA FLAG_MUSS_PRUEFEN LIKE SY-DATAR.
DATA MAX_ERRORS LIKE T130S-ANZUM. " 4.0
note 419281
DATA : FLG_MASS.
CLEAR : FLG_MASS.
FIELD-SYMBOLS: . " 4.0
ALE-distribution unity : IDOC status set by locking "note0361838
data: "note0361838
it_dsp_idocstat like bdidocstat "note0361838
occurs 0 with header line. "note0361838
Initialize data - general
REFRESH T_MFIELDRES.
REFRESH T_IDOC_TRANC.
REFRESH T_IDOC_TRANC. "JH/02.02.98/4.0C KPr100004993
REFRESH t_idoc_tranc_segment. " //br 40 : unnötig
REFRESH matnr_tranc. " -"-
REFRESH t_matnr.
COUNTER-TRANC = 1.
COUNTER-D_IND = 1.
REFRESH T_MARA_UEB.
REFRESH T_MAKT_UEB.
REFRESH T_MARC_UEB.
REFRESH T_MARD_UEB.
REFRESH T_MFHM_UEB.
REFRESH T_MARM_UEB.
REFRESH T_MEAN_UEB.
REFRESH T_MBEW_UEB.
REFRESH T_STEU_UEB.
REFRESH T_STEUMM_UEB.
REFRESH T_MLGN_UEB.
REFRESH T_MLGT_UEB. " //br010797 neu zu 4.0
REFRESH T_MPGD_UEB.
REFRESH T_MPOP_UEB.
REFRESH T_MVEG_UEB.
REFRESH T_MVEU_UEB.
REFRESH T_MVKE_UEB.
REFRESH T_MPRW_UEB.
REFRESH VKORG_ALAND.
REFRESH WERKS_ALAND.
CLEAR APPLICATION_SUBRC.
REFRESH T_MERRDAT.
Check if right function is called
READ TABLE IDOC_CONTRL INDEX 1.
IF SY-SUBRC <> 0.
EXIT.
ELSE.
IF IDOC_CONTRL-IDOCTP <> 'ZBAPI_STUD_IDOC'.
RAISE WRONG_FUNCTION_CALLED.
ENDIF.
ENDIF.
LOOP AT IDOC_CONTRL.
Initialize data - per IDOC
t_idoc_tranc-docnum = counter-tranc.
T_IDOC_TRANC-DOCNUM = IDOC_CONTRL-DOCNUM.
T_IDOC_TRANC-FIRST_TRANC_IDOC = COUNTER-TRANC + 2.
APPEND T_IDOC_TRANC.
Select segments which belong to IDOC
REFRESH T_EDIDD.
LOOP AT IDOC_DATA WHERE DOCNUM = IDOC_CONTRL-DOCNUM.
APPEND IDOC_DATA TO T_EDIDD.
ENDLOOP.
BUSINESS TRANSACTION EVENT (header / data) "note0388000
call function 'OPEN_FI_PERFORM_MGV00200_E' "note0388000
exporting "note0388000
idoc_header = idoc_contrl "note0388000
FLG_APPEND_STATUS = 'X' "note0388000
tables "note0388000
(DEL) idoc_data = idoc_data "note0388000 note0418561
idoc_data = t_edidd "note0418561
idoc_status = idoc_status "note0388000
exceptions "note0388000
others = 1. "note0388000
if sy-subrc = 1. "note0388000
continue. "note0388000
endif. "note0388000
Within one IDOC: loop through data segments:
Prepare internal tables for the current material
LOOP AT T_EDIDD INTO IDOC_DATA.
Transform from CoreData to Normal Data if necesary
CASE IDOC_DATA-SEGNAM.
WHEN 'E1MARAC'.
*--COMMENTED BY SATISH
PERFORM MOVE_E1MARAC_TO_E1MARAM USING IDOC_DATA.
WHEN 'E1MAKTC'.
PERFORM MOVE_E1MAKTC_TO_E1MAKTM USING IDOC_DATA.
*--COMMENTES ENDED BY SATISH
WHEN 'ZBAPI_STUD_SEG'.
PERFORM MOVE_E1MARAC_TO_E1MARAM USING IDOC_DATA.
CLEAR I_ZBAPI_STUD.
Second: Move E1MARAC into E1MARAM
I_ZBAPI_STUD = IDOC_DATA-SDATA.
Third: Move E1MARAM back into IDOC-line
IDOC_DATA-SDATA = I_ZBAPI_STUD.
IDOC_DATA-SEGNAM = 'ZBAPI_STUD_SEG'.
ENDCASE.
CURRENT_TABIX = SY-TABIX.
COUNTER-D_IND = COUNTER-D_IND + 1.
COUNTER-TRANC = COUNTER-TRANC + 2.
CASE IDOC_DATA-SEGNAM.
WHEN 'ZBAPI_STUD_SEG'.
Initialize data - per material
COUNTER-D_IND = 1.
FIRST_TRANC = COUNTER-TRANC.
interpret segment
ZBAPI_STUD_SEG = IDOC_DATA-SDATA.
MOVE-CORRESPONDING ZBAPI_STUD TO I_ZSTUD_UEB.
T_IDOC_ROLLNO-DOCNUM = IDOC_CONTRL-DOCNUM.
T_IDOC_ROLLNO-ROLLNO = I_ZSTUD_UEB-ROLLNO.
APPEND T_IDOC_ROLLNO.
ENDCASE.
if not ZBAPI_STUD_SEG is initial.
ZBAPI_STUD-MANDT = ZBAPI_STUD_SEG-MANDT.
ZBAPI_STUD-ROLLNO = ZBAPI_STUD_SEG-ROLLNO.
ZBAPI_STUD-FNAME = ZBAPI_STUD_SEG-FNAME.
ZBAPI_STUD-LNAME = ZBAPI_STUD_SEG-LNAME.
INSERT ZBAPI_STUD FROM ZBAPI_STUD_SEG.
COMMIT WORK.
ENDIF.
*-- ALE ditribution unity : update IDOC status "note03618
LOOP AT it_dsp_idocstat. "note036
LOOP AT IDOC_STATUS WHERE DOCNUM = it_dsp_idocstat. "note036
DELETE idoc_status INDEX sy-tabix. "note036
ENDLOOP. "note036
APPEND it_dsp_idocstat TO idoc_status. "note036
ENDLOOP. "note036
*--GENERATING THE IDOC STATUS
PERFORM HANDLE_ERROR_EXT " //br40
TABLES "
IDOC_CONTRL "
IDOC_STATUS "
RETURN_VARIABLES "
T_MERRDAT "
T_IDOC_TRANC "
T_IDOC_ROLLNO "JH/4.0C/KPr100004993
USING "
GENERAL_SUBRC "
NO_APPLICATION_LOG "
MASSSAVEINFOS "wk/40c
CHANGING "
WORKFLOW_RESULT. "
PERFORM HANDLE_ERROR
TABLES
IDOC_CONTRL
IDOC_STATUS
RETURN_VARIABLES
T_MERRDAT
T_IDOC_ROLLNO "JH/4.0C/KPr100004993
USING
APPLICATION_SUBRC
CHANGING
WORKFLOW_RESULT.
SORT T_IDOC_ROLLNO BY ROLLNO. "note 315124
React on general error
DATA: I_MERRDAT LIKE MERRDAT.
IF GENERAL_SUBRC <> 0.
I_MERRDAT-MSGTY = 'E'.
I_MERRDAT-MSGID = SY-MSGID.
I_MERRDAT-MSGNO = SY-MSGNO.
I_MERRDAT-MSGV1 = SY-MSGV1.
I_MERRDAT-MSGV2 = SY-MSGV2.
I_MERRDAT-MSGV3 = SY-MSGV3.
I_MERRDAT-MSGV4 = SY-MSGV4.
APPEND I_MERRDAT TO T_MERRDAT.
ENDIF.
LOOP AT T_MERRDAT INTO I_MERRDAT
WHERE MSGTY = 'S' "success
OR MSGTY = 'D' "dummy
OR MSGTY = 'I' "Information " //br011097 zu 3.1I
OR MSGTY = 'H' "dummy " 4.0
OR MSGTY = 'W'. "warning
DELETE T_MERRDAT.
ENDLOOP.
ENDLOOP.
ENDLOOP.
ENDFUNCTION.
*& Form handle_error_ext
FORM HANDLE_ERROR_EXT
TABLES
IDOC_CONTRL STRUCTURE EDIDC
IDOC_STATUS STRUCTURE BDIDOCSTAT
RETURN_VARIABLES STRUCTURE BDWFRETVAR
T_MERRDAT STRUCTURE MERRDAT
IDOC_TRANC STRUCTURE MATIDOCTRANC
JH/02.02.98/4.0C KPr100004993 (Anfang)
T_IDOC_ROLLNO STRUCTURE T_IDOC_ROLLNO
JH/02.02.98/4.0C KPr100004993 (Ende)
USING
GENERAL_SUBRC LIKE SY-SUBRC
NO_APPLICATION_LOG LIKE SY-DATAR
MASSSAVEINFOS LIKE MASSSAVINF
CHANGING
WORKFLOW_RESULT LIKE BDWF_PARAM-RESULT.
DATA FLAG_ERROR_HAPPENED.
DATA I_MERRDAT LIKE MERRDAT.
DATA IDOC_INDEX_2_SUBRC LIKE SY-SUBRC.
DATA AL_HANDLES TYPE BAL_T_LOGH. "//br99
SORT T_IDOC_ROLLNO BY ROLLNO. "note 315124
React on general error
IF GENERAL_SUBRC <> 0.
REFRESH T_MERRDAT.
i_merrdat-tranc = 0. " //br261197
READ TABLE IDOC_TRANC INDEX 1. " zu 40b
I_MERRDAT-TRANC = IDOC_TRANC-FIRST_TRANC_IDOC. "
I_MERRDAT-MSGTY = 'E'.
I_MERRDAT-MSGID = SY-MSGID.
I_MERRDAT-MSGNO = SY-MSGNO.
I_MERRDAT-MSGV1 = SY-MSGV1. I_MERRDAT-MSGV2 = SY-MSGV2.
I_MERRDAT-MSGV3 = SY-MSGV3. I_MERRDAT-MSGV4 = SY-MSGV4.
APPEND I_MERRDAT TO T_MERRDAT.
ENDIF.
DATA: C_TRUE,
C_FALSE VALUE 'X'.
If error happened ==> Rollback whole work....
LOOP AT T_MERRDAT INTO I_MERRDAT WHERE MSGTY NA 'SDHWI'.
EXIT.
ENDLOOP.
IF SY-SUBRC = 0.
FLAG_ERROR_HAPPENED = C_TRUE.
ROLLBACK WORK.
ELSE.
FLAG_ERROR_HAPPENED = C_FALSE.
ENDIF.
Set IDOC status
two cases:
single IDOC-processing: ==> error can be written in IDOC status
package processing ==> anononymous "package error" for all IDOCs
READ TABLE IDOC_CONTRL INDEX 2.
IDOC_INDEX_2_SUBRC = SY-SUBRC.
IF SY-SUBRC = 0.
IF 1 = 2. "//br40
MESSAGE E051(B1). "
ENDIF. "
CLEAR I_MERRDAT.
I_MERRDAT-MSGID = 'B1'.
I_MERRDAT-MSGTY = 'E'.
I_MERRDAT-MSGNO = '051'.
ENDIF.
IF IDOC_INDEX_2_SUBRC NE 0 OR FLAG_ERROR_HAPPENED = C_FALSE.
Nur in diesen Fällen wird Application Log geschrieben
Delete all Successes and Dummy records from t_merrdat
DELETE t_merrdat WHERE msgty = 'S' "success " testweise
OR msgty = 'D'. "dummy "
LOOP AT T_MERRDAT INTO I_MERRDAT WHERE MSGTY = 'D'. "
I_MERRDAT-MSGTY = 'S'. "
MODIFY T_MERRDAT FROM I_MERRDAT. "
ENDLOOP. "
ENDIF.
WORKFLOW_RESULT = 0.
LOOP AT IDOC_CONTRL.
Set IDOC status
CLEAR IDOC_STATUS.
IDOC_STATUS-DOCNUM = IDOC_CONTRL-DOCNUM.
IF FLAG_ERROR_HAPPENED = C_FALSE.
Application log
PERFORM WRITE_APPL_LOG TABLES IDOC_TRANC
T_MERRDAT
IDOC_STATUS
USING IDOC_CONTRL
FLAG_ERROR_HAPPENED
NO_APPLICATION_LOG
MASSSAVEINFOS
AL_HANDLES.
idoc_status-status = '53'. "OK!
APPEND idoc_status.
JH/02.02.98/4.0C KPr100004993 (Anfang)
Fill Return variables
CLEAR RETURN_VARIABLES.
RETURN_VARIABLES-DOC_NUMBER = IDOC_CONTRL-DOCNUM.
RETURN_VARIABLES-WF_PARAM = 'Processed_IDOCs'.
APPEND RETURN_VARIABLES.
Verknüpfungseintrag anlegen
READ TABLE T_IDOC_ROLLNO WITH KEY ROLLNO = IDOC_CONTRL-DOCNUM
BINARY SEARCH.
IF SY-SUBRC = 0.
RETURN_VARIABLES-DOC_NUMBER = T_IDOC_ROLLNO-ROLLNO.
RETURN_VARIABLES-WF_PARAM = 'Appl_Objects'.
APPEND RETURN_VARIABLES.
ENDIF.
JH/02.02.98/4.0C KPr100004993 (Ende)
ELSE.
IF IDOC_INDEX_2_SUBRC NE 0.
Application Log
PERFORM WRITE_APPL_LOG TABLES IDOC_TRANC
T_MERRDAT
IDOC_STATUS
USING IDOC_CONTRL
FLAG_ERROR_HAPPENED
NO_APPLICATION_LOG
MASSSAVEINFOS
AL_HANDLES.
ELSE.
IDOC_STATUS-MSGID = I_MERRDAT-MSGID.
IDOC_STATUS-MSGTY = I_MERRDAT-MSGTY.
IDOC_STATUS-MSGNO = I_MERRDAT-MSGNO.
IDOC_STATUS-MSGV1 = I_MERRDAT-MSGV1.
IDOC_STATUS-MSGV2 = I_MERRDAT-MSGV2.
IDOC_STATUS-MSGV3 = I_MERRDAT-MSGV3.
IDOC_STATUS-MSGV4 = I_MERRDAT-MSGV4.
IDOC_STATUS-STATUS = '51'. "ERROR!
APPEND IDOC_STATUS.
ENDIF.
Fill Return variables
CLEAR RETURN_VARIABLES.
RETURN_VARIABLES-DOC_NUMBER = IDOC_CONTRL-DOCNUM.
return_variables-wf_param = c_wf_par_processed_idocs.
RETURN_VARIABLES-WF_PARAM = 'Error_IDOCs'.
APPEND RETURN_VARIABLES.
WORKFLOW_RESULT = 99999.
ENDIF.
APPEND idoc_status.
ENDLOOP.
IF NO_APPLICATION_LOG IS INITIAL.
CALL FUNCTION 'BAL_DB_SAVE' "//br99
EXPORTING
I_IN_UPDATE_TASK = ' '
I_SAVE_ALL = ' '
I_T_LOG_HANDLE = AL_HANDLES.
EXCEPTIONS
LOG_NOT_FOUND = 1
SAVE_NOT_ALLOWED = 2
NUMBERING_ERROR = 3
OTHERS = 4.
CALL FUNCTION 'BAL_GLB_MEMORY_REFRESH' "//br99
EXPORTING
I_AUTHORIZATION =
I_REFRESH_ALL = ' '
I_T_LOGS_TO_BE_REFRESHED = AL_HANDLES.
EXCEPTIONS
NOT_AUTHORIZED = 1
OTHERS = 2
ENDIF.
ENDFORM. " handle_error
Save, check and activate
11. Assigning the Inbound Function Module to Basic Type & Message Type
o Go to T. Code WE57
o Click on change, continue, continue and New Entries Button
o Enter the Module as IDOC_INPUT_ZBAPI_STUD_MAS
o Type as F
o Basic Type as ZBAPI_STUD_IDOC
o Message Type as ZBAPI_STUD_MAS.
o Direction as 2
o Save and back
Now Login in 810 client
12. Assigning the Inbound Function Module in ALE Table
o Go to T. Code BD51
o Click on continue, New Entries button
o Give the Inbound Function Module IDOC_INPUT_ZBAPI_STUD_MAS
o Give Input t. as 0 (zero)
o Save and back
13. Creating Process Code
o Go to T. Code WE42
o Click on Change, New Entries Button
o Give Process Code name as ZSTUD, give Description & Save
o Select Processing with ALE Services Radio button
o Select Processing by Function Module Radio button
o Click the ALE Table (arrow Icon) in Identification
o Give the Function Module Name ZIDOC_INPUT_ZBAPI_STUD_MAS
o Give maximum number of repeats 0
o Save and back, back
o Select the process code from the list & click on Logical Messages Icon
o Give the Message Type as ZBAPI_STUD_MAS
o Save & Back, Save & Back, Save & Back
14. Changing the Customer Distribution model in Receiving system
o Go to T. Code BD64
o Click on change and Create model view button
o Select the model view & click on Environment -> Generate Partner Profiles
o Select Transfer IDOC Immediately and Trigger Immediately radio buttons
o Click on Execute
o You should get a list in green color which means it executed successfully.
15. Assigning the Process Code to Message Type in Receiving System
o Go to T. Code WE20
o Expand Partner Type LS
o Select the Partner Profile STUD_S
o Double click on Message Type ZBAPI_STUD_MAS in Inbound parmtrs.
o Give the Process Code as ZSTUD
o Click on Trigger Immediately Radio button
o Save & Back
o Save & Back
16. Creating the Selection Program (Outbound Program)
Login in client 800.
Go to T. Code SE38
Create a Report Program as ZSTUD_SEND with the following code
REPORT ZSTUD_SEND
NO STANDARD PAGE HEADING.
TABLES: ZBAPI_STUD.
DATA: IT_STUD LIKE ZBAPI_STUD OCCURS 0 WITH HEADER LINE.
SELECTION-SCREEN:BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-H01.
SELECT-OPTIONS: S_ROLLNO FOR ZBAPI_STUD-ROLLNO.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN:BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-H02.
PARAMETERS: P_MESTYP LIKE EDIDC-MESTYP,
P_RCVPRN LIKE TBDLST-LOGSYS.
SELECTION-SCREEN:END OF BLOCK B2.
SELECTION-SCREEN:END OF BLOCK B1.
START-OF-SELECTION.
PERFORM CREATE_STUDENT.
PERFORM CREATE_IDOC.
*& Form CREATE_STUDENT
sending student
FORM CREATE_STUDENT.
SELECT * FROM ZBAPI_STUD
INTO TABLE IT_STUD
WHERE ROLLNO IN S_ROLLNO.
ENDFORM. " CREATE_STUDENT
*& Form CREATE_IDOC
IDOC Creation
FORM CREATE_IDOC.
DATA : IMAS_DATA LIKE EDIDD OCCURS 10 WITH HEADER LINE,
IMAS_CON LIKE EDIDC OCCURS 10 WITH HEADER LINE,
ICOM_CON LIKE EDIDC OCCURS 10 WITH HEADER LINE.
IMAS_CON-RCVPRT = 'LS'.
IMAS_CON-RCVPRN = P_RCVPRN.
IMAS_CON-IDOCTP = 'ZBAPI_STUD_IDOC'.
IMAS_CON-MESTYP = P_MESTYP.
IMAS_CON-DIRECT = 1.
APPEND IMAS_CON.
LOOP AT IT_STUD.
IMAS_DATA-SEGNAM = 'ZBAPI_STUD_SEG'.
IMAS_DATA-SDATA = IT_STUD.
APPEND IMAS_DATA.
ENDLOOP.
CALL FUNCTION 'MASTER_IDOC_DISTRIBUTE'
EXPORTING
MASTER_IDOC_CONTROL = IMAS_CON
OBJ_TYPE = ''
CHNUM = ''
TABLES
COMMUNICATION_IDOC_CONTROL = ICOM_CON
MASTER_IDOC_DATA = IMAS_DATA
EXCEPTIONS
ERROR_IN_IDOC_CONTROL = 1
ERROR_WRITING_IDOC_STATUS = 2
ERROR_IN_IDOC_DATA = 3
SENDING_LOGICAL_SYSTEM_UNKNOWN = 4
OTHERS = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
COMMIT WORK.
LOOP AT ICOM_CON.
WRITE :/ 'IDOC: ', ICOM_CON-DOCNUM, 'CREATED SUCCESSFULLY'.
ENDLOOP.
ENDFORM. " CREATE_IDOC
17. Transferring the student records from 800 to 810 client
Execute Report Program ZSTUD_SEND
Give the Range of Roll Nos to Transfer
Give Message Type as ZBAPI_STUD_MAS
Give Receiver Logical system as STUD_R
Execute
You should get the IDOC Number
Take the IDOC Number and go to T. Code WE05 & Execute
In Outbox you can see the IDOC Status
Select the status record in left side window
Double click on the Status record in right side window
You can see the Control Record, Data Record and Status Records for that IDOC
If the ICON is green and the status code is 3, it means the IDOC is passed to PORT Successfully.
Now Login in 810 client
Go to T. Code WE05 & Execute
You can see the status record in left side window
If the status no is 53 and color is green, it means the IDOC is Posted to Application successfully.
You can see the Log Information by double clicking on the status record in right side window.
Now in left side window, you can see the Control Record, Data Record & Status Record of the IDOC
Now go to T. Code SE16
Give the table name ZBAPI_STUD & press F7
See the contents of the table
The table is updated with the students records transferred from 800 client with our selection program.
Reward if useful
Thanks
Jagadeesh.G
Maybe you are looking for
-
Hi gurus!! I created a WD project: - created a model with reference to a ZBAPI - created a Component - created a Custom Controller with 2 nodes: one to the INPUT class of the model, and the other to the OUTPUT class of the model - created a View Main
-
Issue about 10.1 Sync with google contacts
here's the situation: i bought my Q10 came with OS238, when i set google account up with IMAP, all the email, calendar, and contacts would sync ONCE, which means i got all my contacts from google on my Q10. however, when i add or modify any contact o
-
Firefox 4.0 will not find update to 4.0.1, add-ons for 4.0.1 will not run
30 May 2011, 18:22h UTC Downloaded 4.0 UK-edition on my laptop, the 4.0 US-edition on my desktop, and the 4.0 UK-edition on a 2nd laptop. On mine, updates to 4.0.1 are not found, some add-ons were taken off, as incompatible, that ran on the 4.0 on my
-
Hi there, Just installed the Studio 2 and lately, it keeps crashing my computer. Any advice as to what could be causing this? I have 5g of memory. Sara
-
Open error 5 on permission verify
Is there a repair for this?