IDRAC6 racadm not working on Windows 2008 R2 x64 Server

We have Dell PowerEdge M910 on a M1000e Blade Chasis
iDRAC is Accessible via its Web Site and racadm -r works on different Server
But on the Actual Machine its giving me the Error of:
ERROR: RACADM is unable to process the requested subcommand because there is no
local RAC configuration to communicate with.
Local RACADM subcommand execution requires the following:
1. A Remote Access Controller (RAC) must be present on the managed server
2. Appropriate managed node software must be installed and running on the
server
Is there anyway to resolve this like Re-installation of Certain Software? or Anything that would make the racadm work when running on the server itself
Search Google and this Forums and this problem seem to be unique.
Lifecycle Controller Firmware is 1.6.5.12
Firmware Version is 3.60 (Build 3)
Operating System is Microsoft Windows Server 2008 R2, Enterprise x64 Edition
Any help would be greatly appreciated

Many Thanks for your Reply
Since iDRAC is accessible via it IP Address I have done the following but NOT successfull.
racadm -r <IPAddress> -i racreset soft/hard (with and without -f flag)
Also Reset using the Blade Chasis iDRAC and Server's iDRAC
I dont think there is something wrong with the iDRAC, as this is accessible using the iDRAC Web GUI and command line interface with the "-r" flag.
The issue is running the racadm (without and -r) on the server itself and getting the error mentioned above
Is there a way to check the any Logs file and or is there any Windows Server Service's Component that is needed by racadm command in order for it to function when running locally?
BTW
OMSA is at 7.4.0.2
Lifecycle Controller Firmware is 1.6.5.12
Firmware Version is 3.60 (Build 3)
Thanks and Best Regard

Similar Messages

WP 8.1 Emulator not working on Windows 8.1 x64

Windows Phone 8.1 Emulator not working on Windows 8.1 x64
Ram 2GB,Hyper-V is enabled
Error:Windows Phone Emulator is unable to set some properties on the virtual machine :
1.Couldn't change memory of virtual machine'xyxyxyxyxyxyyxyx' failed to modify device 'Memory'.(Virtual Machine ID'xyz123-xyz123-xyz123-xyz123-')
2.Invalid start-up memory assigned for 'xyxyxyxxyxyxyxxyxyyxyx'.
Please help
Nekvinder Singh

You're welcome.
Sorry, I can't know what the exact problem was. Many things don't start in Windows Safe Mode, like third-party security software and included security tools like Windows Defender. You can use the following guide if you want to troubleshoot the issue. The "How to determine what is causing the problem by performing a clean boot" section is the relevant part.
* [http://support.microsoft.com/kb/929135/en-us How to perform a clean boot in Windows | Microsoft Support]

Redirect Printer is not working in windows 2008 R2 Server( Server Running as AD and Terminal Service(both role in single server))

Dear Team
i need solution from Microsoft for the issue;
My infrastructure
- Windows Server 2008 R2 (Role - AD and Terminal Service)- Updated
- Client Machine running with windows 7 pro (Updated)
- Client Using RDP Client to connect Windows 2008 Terminal Session
- All are working fine, but Redirect Printing is not working (Through Windows 7 Pro) ... (HP Laser Jet 1020 plus - attached in Client PC)
- it is working fine from Windows XP
- i was done All terminal setting in both end, also try RDP Login with Administrator User, but issue is not resolve;
What Microsoft can say about the issue;
Thanks & Regards,
VIMAL PRAJAPATI | 09824111686

Have you checked the Print Service log in event viewer?
Here's How.
I have the Microsoft XPS driver on my clients, so I use that fact to my advantage below.
Click Start Button/Administrative Tools/Remote Desktop Services/Remote Desktop Services Manager on the RDSH server
Click the Sessions tab. PC’s are listed Under Client Name by their computer name. Take Note of the corresponding
ID. We will use this to locate the Printer information in the Event Log.
In the Event Log open Application and Services Logs/Microsoft/Windows/Print Service/Admin/ and Find the Event ID 823 entry that has the corresponding ID from the sessions tab you previously noted.
This Event Log Entry is created at Logon and you can only get the session ID when they are logged in.
This tells you what client printer was mapped for the client. The name that appears is the name of the Printer that was set on the client when the printer was installed.
See if you see any errors here.
If you see Event Id 823 with the following message “The default printer was changed to Microsoft XPS Document Writer,winspool,Ne00:. See the event user data for context information.” Twice in a row with no other messages in between, and the first occurs
at the time the user logged in, then their printer was not properly redirected.
You see the Microsoft XPS driver mapped for each session prior to Easy Print redirecting the client machine’s Default Printer.
Since your printer is the HP 1020 I would bet the driver on the client does not work with Easyprint. I would try the the HP Universal Print Driver or the driver for a printer that is very close, like the HP 1018.
Thanks,
Jeremy

Jinitiator & IE8 On Windows 2008 R2 x64 Server - Please Help!

Hello All -
I am wrapping up configuration of a Citrix Xenapp server for a presentation to my manager. The ONLY thing that I cannot get working is jinitiator for our Oracle apps. It is running on IE8 on WIndows 2008 R2 x64.
I have done a lot of research and replace jvm.dll from Java, but haven't been able to get that to work. My guess is that it's either because I'm downloading the incorrect version of Java (which I extract the .jvm file from) or that i'm running x64.
Please give any suggestions to help. I've spent hours on this project and if I cannot figure this out and have to go back to a different version of OS, then it's all lost -
Thanks!

801574 wrote:
Great - Thanks.
Will this need to be something that it installed/configured on my machine with IE8 installed or will changes need to be made to the actual Oracle server? We don't manage the server so hopefully it will be the client end.
Thank YouAs long as you have the necessary version of JRE installed, you should be good. Necessary application changes/configuration must be made in order for it to use JRE.
Srini

Crystal Reports 2011 not working in windows 2008 server CITRIX

Hi All,
We are using Crystal reports 2011 in windows 2008 server which is CITRIX farm., having crystal reports 2011 runtime in it..
We are using .net applicationton to run the reports.
The crystal reports parameter popup is getting opened. But the calendar icon is not fuctioning ..clicking on the calendar control no pop up appears. no error too..
OK button is not responding. Cancel button too.
Can you please help us why we are facing this issue in CITRIX only. When we are using the same version in desktop, Crystal report is working fine.
Please feel free to ask if required any more details about my problem.
Regards,
Venkat.K

Ido's idea is excellent, only addition I'd like to make is the following:
You are trying to run a .NET app. However, CR 2011 does not install any SDKs. So, the directory specified by Ido is not correct. Assuming that by CR 2011 you actually mean "SAP Crystal Reports, Developer Version for Visual Studio .NET", then the directory would be:
C:\Program Files (x86)\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\Crystal Reports 2011\crystalreportviewers\prompting
If that does not help, use Process Monitor and see what the logs tell you (look for Access Denied messages).
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

System.Windows.Forms.SaveFileDialog not working under Windows 2008 R2 Server

I am using Windows Server 2008 R2 (64-bit) that is been virtualized with Hyper-V and it is being used as a "Remote Desktop Server".
I am trying to use this PowerShell code that will open a "Save-File-Dialog" box to select the PDF file and send it to my "batch" file for scanning. This code works great on my Windows Vista machine and my Windows 7 32-bit machine
but I cannot get it to work on the "Windows 2008 R2 Server (64-bit)". It will not come up with any window at all and it will not produce any errors at all, so I can't exactly google for this issue. I am using PowerShell 2.0 from 2009.
Any ideas? I tried it from an Admin account and a regular domain users and neither worked at all, no errors, no window, no nothing.
*** Update ***
    I took Out-Null out and I received this...
GAC    Version        Location
True   v2.0.50727     C:\Windows\assembly\GAC_MSIL\System.Windows.Forms\2.0.0.0__b77a5c561934e089\System.Windows.Forms.dll
I then checked the path and the DLL file was in there and it had read and execute permissions for Domain users and Administrators and the window still won't pop up...
Here is the entire code in question.....
# Uses the dot net assembly to give the users a Save-File-Dialog box so they can decide where to put the pdf file
Function Get-SaveFile($initialDirectory){
[System.Reflection.Assembly]::LoadWithPartialName("System.windows.forms") | Out-Null
$SaveFileDialog = New-Object System.Windows.Forms.SaveFileDialog
$SaveFileDialog.initialDirectory = $initialDirectory
$SaveFileDialog.filter = "PDF files (*.pdf)| *.pdf"
$SaveFileDialog.ShowDialog() | Out-Null
$SaveFileDialog.filename
# open dialog box to select the .nessuss file.
$OutputFile = Get-SaveFile
# User selected where they want to put the scanned.pdf file and it will automatically set it to .pdf for them
start-process Scan $OutputFile

I ran the code you have in your function on a Windows 2008 Standard server, and it seems to be hanging on the line
$SaveFileDialog.ShowDialog()
| Out-Null
It just sits there and nothing happens, but if I run it on my Windows 7 machines, it runs without any issues. So it seems like the dialog opened, but behind the scenes, and is waiting on the user, but since it doesn't open, the user can't do anything.
If you find that my post has answered your question, please mark it as the answer. If you find my post to be helpful in anyway, please click vote as helpful.
Don't Retire Technet

Re: Toshiba Store Alu 3.5" 1TB HDD not working with Windows 2008 64-bit

Just bought this as a backup device for Small Business Server 2008 which runs on Windows 2008 64-bit. However it does not recognise it? Are there any drivers anywhere for this or is it just not supported and I need to buy an alternative?
Connected it to my Windows 7 64-bit laptop and no problems there.
Anyone else had same problem?

Hi
Unfortunately, there is no other software for download.
I checked the Toshiba driver page in Options area but didnt find anything
As far as I know its a plug & play HDD so you dont need any software in order to recognize the HDD
Possibly there is a password protection.
Try this:
Connect your HDD to the PC where the HDD is working
select the CD Drive (Password) with your Explorer
run the ONSPCLCK.exe
select "Options"
select "Disable Password Security"
enter your Current Password
unplug the HDD
connect the HDD
Now it will work but without any password protection. Maybe it would works

Java 1.6 u38 stopps working on Windows 2008 R2 Terminal Server

Hello,
I have got a strange behavior on our Terminal Server Farm. We have updated our Servers to Windows 2008 R2. Java 1.6 u38 runs fine, but it stops working suddenly.
Reinstall solves the Problem, but only for several hours. Then some users are not able to use Java from Internet Explorer or direct starting JNLP Applications.
Java starts, but nothing happens. You can see the Java6 Startup Windows with the dots running and thats all.
Admin Users are ables to use Java and some "normal" Users are able, too. After reinstall all user are able to use Java. Next day all servers from our RDS Farm are falling out again.
No eventlog entries or anti-virus entires are present.
Does anybody have an idea whats going on here?
best regards,
Björn

It was a problem with Novell SecureLogin
http://www.novell.com/support/kb/doc.php?id=7007306

Remote desktop connection not working in windows 7 Pro x64 bit sp1 3389 port not working

i have still facing same problem in last two week in my system RDC not working . i have installed in my system windows 7 x64 bit Pro sp1 then i check 3389 port working or not in my system use the command netstat -a -o command in
command prompt but this is my bad luck its not woking in my machine after i have decide to change RDC listening port via registry i have change it 3389 to 3391 after restart my system, and
after again testing using same command but no any change again rdc not listening . After i have search this issue on search engine google bing and microsoft , i have found more solutions but i have try one
uninstalled two microsoft updates first is kb KB2621440 second is KB2667402 and after again restart my system and again installed KB 2667402 But not change i have already enabled Remote Desktop connection in windows 7 and select the option
any version computer running , i have try three and four time enable disable remote desktop connection in my machine . but not change i have all windows firewall disable and uninstalled anti virus they intalled in my machine , and using the Mcafee
stinger tools to scan my machine to remove virus but stinger is not found any thread in system. ihave already run this command in my system sfc /scannow Please Can you help me to fix this issue.

Hi,
When you try to start the Remote Destop Connection, what errors it showed out?
Could the other PCs connect this PC with the RDC?
So you have read this blog?
RDP connections might fail due to a problem with KB2621440 - MS12-020
Did you reinstalled the KB2621440?
Besides, did you follow this guide to enable the RDC connection?
Connect to another computer using Remote Desktop Connection
And also this guide?
Why can’t I connect using Remote Desktop Connection?
Please take a check with those settings again.
Best regards
Michael Shao
TechNet Community Support

IIS Server / Ftp Isolation user not working in Windows 2008 R2

HI,
Please help as last time when we are still using the Server 2003 we don't have issue with the IIS virtual directory, what I mean is when the user log in there username and password they can only see directly their folder but when we already shift to server
2008 everytime we log in we can able to see other users folder , of course even I try to open other users folder they cant able to access only what belongs to me. I hope we can still do like last time, we can only see our own folder in file explorer.
Please help..
Thanks,

Hi,
As the permissions on IIS virtual directory are not similar with the permissions on windows file systems, I suggest you ask for help from IIS7 forum for better and accurate answer to the question.
http://forums.iis.net
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Hp1022n printer doesn't working on windows 2008 R2 x64 via RDP from windows 7

Dear Sir,
i have a network of some windows7 and some server 2008 r2 Terminal Services, There is
a hp 1022n printer . when i print locally from windows7 , the
print comes very smoothly but no printing from windows Server 2008 R2 via RDP. i had installed driver for hp
1022n + (windows 7 x64) on server 2008 r2 but it still doesnt print.
note there are other printer installed (via TCP/IP ,hp jetdirect printing) and they working finely on
server 2008r2.
so give me a stable solution for printing on hp 1022n + printer via RDP server from windows 7

Hi Mahya,
Thank you for posting in Windows Server Forum.
Did you receive any particular error for your issue?
Please check the link provided by Hari, you can use RD Easy Print driver for server 2008 R2.In addition, if possible try using Universal print driver for your case.
Using Remote Desktop Easy Print in Windows 7 and Windows Server 2008 R2
http://blogs.msdn.com/b/rds/archive/2009/09/28/using-remote-desktop-easy-print-in-windows-7-and-windows-server-2008-r2.aspx
Hope it helps!
Thanks.
Dharmesh Solanki

Flash not working in Windows 8.1 x64 with Internet Explorer 11

I updated my Windows 8 to 8.1 and Flash has stopped working in IE11. Flash still works fine in Firefox. I have tried to use the patches available from Windows, but the patch won't install because "not applicable to your version".
The Flash verification page says "You're not running Internet Explorer in Windows 8". I have tried all the troubleshooting I can find, and no positive results as of yet. Thanks...

Hi,
Please be aware that Flash player is embedded in Windows 8.1.
Regarding this issue, please try following steps to check the results:
Update for Internet Explorer Flash Player for Windows 8.1 and Windows 8
http://support.microsoft.com/kb/2886439
Flash Player Help / Flash Player issues | Windows 8
http://helpx.adobe.com/flash-player/kb/flash-player-issues-windows-8.html
If the issue still persists, please post back the detailed information about the error message when you try to use flash and the event log about your issue.
Keep post.
Regards,
Kate Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Time Zone Redirect Doesn't work on Windows 2008 R2 Terminal Server

Hello All,
A client has two Windows 2003 and two Win 2008 R2 Terminal servers.
When users from a different time zone login to the Win 2003 server, the time zone of the server changes to reflect their own time zone.　 However when they login to the Win 2008 R2 servers, the time zone on the server doesn’t change.
I already enabled the "Allow time zone redirection" on both Win 2008 R2 Terminal Servers in :
Computer Configuration\Policies\Administrative Templates\Windows Components\Terminal Services\Terminal Server\Device and Resource Redirection
Yet when the clients login to the 2008 server and checks the time on the server, it still shows local/server time and not their own time zone.
Any input will be appreciated.

Hi,
How are things going? I just want to check if the information provided was helpful. If there is any update or concern, please feel free to let us know.
Best Regards,
Aiden
If you have any feedback on our support, please click
here
Aiden Cao
TechNet Community Support

Amd suitchable graphics with hd6670 (and intell 3000 ) will not work on windows 10

hi there i have amd suitchable graphics with intell , and the amd will not work on windows 10 pro x64 the actual model of the amd is HD 6670 but is using the drivers of the hd6470. in any case it will not work in windows 10 pro x64 after a clean install. please any help thanks

Have you disabled the firewall in you security system? Windows firewall rarely gets in the way, but security systems' do.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Web Service Client(Console App) not working on Windows Server 2008 R2 Standard Edition

I am trying to consume an ASMX Web Service in a console app, its working fine in Windows 7,Windows Server 2012 Standard,Windows Server 2008 R2 DataCenter,Windows Server 2008 R2 Enterprise, But its not working in Windows Server 2008 R2 Standard Edition which
is the deployment server.
I tried consuming the ASMX web service using Web Reference and Service Reference as well but its not helping. Its throwing up the following error,
Message:There is an error in XML document (1, 331491).
Inner Exception : System.Xml.XmlException: '.', hexadecimal value 0x00, is an invalid character. Line 1, position 331491.
The scenario is that i call the web service and it returns me an XML i am not able to receive the XML on Windows Server 2008 R2 Standard Edition.
Please provide suggestions on this I need to resolve this ASAP.

Hi,
This question is better asked here:
http://social.msdn.microsoft.com/Forums/en-US/home?forum=asmxandxml
Experts here are more familiar about it and they can give you more efficient suggestion.
Thank you.

IDRAC6 racadm not working on Windows 2008 R2 x64 Server

Similar Messages

Maybe you are looking for