IE not completing the destroy() method

Hi,
I am experiencing a problem with my applet in IE. I call a native method in the destroy() method of my applet. The native method takes about 1/2 sec to execute. This works fine in Firefox, however in IE it doesn't seem to allow enough time for the destroy method to complete before blowing away the JVM.
Can I possibly expend the time IE allows to execute the destroy method?
Note: this is not an issue when I switch between pages because the JVM remains alive for the whole browser session.
I have no idea how to fix this.
Any help or advice would be great.
Many thanks,
Alex

You shouldn't be keeping the connection that long open. It's a bad design. It will timeout sooner or later and your complete application will crash. Always acquire and close the connection in the shortest possible scope, preferably just in the same method block where you process the query and/or results. If you want to improve performance while connecting, consider using a connection pool.
Back to the actual problem: a servlet is created only once during application's lifetime and not during every request as you appears to think.
You may find this tutorial useful to read on about using the DAO pattern in JSP/Servlet.
[http://balusc.blogspot.com/2008/07/dao-tutorial-use-in-jspservlet.html]

Similar Messages

Database connection not closed in Destroy() method of servlet

Hi,
I have a problem with my deployed web application. At first, I thought Glassfish was messing up on me, and after checking the log I could see plenty of null pointer exceptions being thrown at lines in my code where I generate prepared statements from my connection object. I have been initialising my connection in the Init() method of all my classes, and equally, I've been closing it in Destroy(). I can only imagine that destroy() isn't being called - since the log clearly shows "connection success" messages but not "connection closed" messages. I am connecting to the servlets via a J2ME app on my mobile phone. Does connecting in this way somehow not invoke the destroy method when the servlets work is complete? Am I going to need to move all my connection initilisation and closing into the necessary doGet/doPost methods of each of my servlets?
Chris

You shouldn't be keeping the connection that long open. It's a bad design. It will timeout sooner or later and your complete application will crash. Always acquire and close the connection in the shortest possible scope, preferably just in the same method block where you process the query and/or results. If you want to improve performance while connecting, consider using a connection pool.
Back to the actual problem: a servlet is created only once during application's lifetime and not during every request as you appears to think.
You may find this tutorial useful to read on about using the DAO pattern in JSP/Servlet.
[http://balusc.blogspot.com/2008/07/dao-tutorial-use-in-jspservlet.html]

Error: Sorry! We could not complete the transaction using this payment method. Please contact support.

I am everytime getting the following error
Sorry! We could not complete the transaction using this payment method. Please contact support.
I have put my 2 credit card information with Microsoft. I tried calling 2 times the customer support but it was a pathetic response. In a single call I talked to 4 customer support officers and everybody passed on the call to the next without resolving the
problem, and without telling the next officer what is my issue!! they just passed on the phone call to avoid me!!
It is really frustrating that neither Microsoft is provide a good support (it was hard for them to understand my issue, in fact one of the support guy did not even know spelling of Azure.. he/she was saying it assure!!! and One of the guy told me that I
cannot use credit card outside US and Canada. then why you call yourself global???
So Microsoft you have a few things to do as your homework.
1. Your support is pathetic, frustrating and requires better people out there who know about your products, so train them first!
2. You got my 2 credit cards information which I see at subscriptions for Windows Azure, please remove both of them if you cannot provide a good support and subscription.
3. Learn from other cloud providers, AWS will otherwise kill your business.
Regards
Kajal
Kajal Sinha

Hi Kajal,
Sincerely apologize for this inconvenience, for billing & account issue, usually we need to contact the support team by creating a support ticket at
http://www.windowsazure.com/en-us/support/contact/. Or if that doesn't work because you don't have an active subscription you will need to contact general customer support to have them create
a support ticket for you
http://support.microsoft.com/gp/customer-service-phone-numbers?wa=wsignin1.0).
If above support channels don't work, at your convenient, could you please send an email to me: dxu at microsoft.com with kindly providing your:
Name
Email address
Phone number
We will provide help via emails. Thank you.
Best Regards,
Ming Xu
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Could not complete the command because of a problem using the Adobe Color Engine

Hi all
This bizarrely started this morning - completely out of the blue - and I've no idea why.
Setup: Mac 10.8.2 / Creative Suite Premium PhotoShop CS5 extended (patched to 12.04)
Am working on images exported from LightRoom 4 (16bit A3 Pro Photo RGB PSDs) in PhotoShop CS5.
As part of my image grading process I have a PhotoShop Action that does the following: copy layer to new document (document respects all of copied layer settings) > Image > Adjustments > HDR toning > apply a certain HDR preset > copy to resultant image back to original doc > set opacity as 40%.
Totally out of the blue, after having this action for about 2 months, this morning I start getting a warning dialog of "Could not complete the command because of a problem using the Adobe Color Engine" and the action fails. The failure seems to take place at the 'make document' part of the action and seems to somehow be related to the contents of the clipboard.
I've tried trashing and re-creating the action. It works first time out fine and then - on the next image - errors again.
At present I can only safely carry out the work 'manually' by completing all the actions myself.
I can think of no settings that have changed and the OS hasn't been updated in a while.
I have found one other thread on a similar problem in PhotoShop Elements, but no definitive solution.
Any help appreciated as I have a shedload of stuff to process.
Best wishes
TP

OK: trash of prefs didn't work. Tried thrice. Re-created orig action. same problem.
BUT!
Your 'Image > Duplicate' suggestion does seem to work. If I use that in a new action as the method for creating the HDR version doc (instead of 'Select > Copy > New > Paste), it seems to work.
Will try that out this afternoon, but for now: WIN!
Many thanks for the suggestion!
TP

"Could not complete the save command because of program error."

Dear all,
I am having problems saving jpegs on Photoshop CS3. I use windows XP professional. I am saving using the save menu (not save as). I am using a saving archive, where folders are within folders. I am trying to save images which have been copy and pasted from the web.
The message I get is:
“Could not complete the save command because of program error.”
Has anyone got this message, and know how to solve it?
Helen

I think My Documents is a local folder.
I would avoid saving to deeply buried folders because the path will be too long.
If the problem still persists, try resetting your preferences as described in the FAQ.
http://forums.adobe.com/thread/375776?tstart=0
You either have to physically delete (or rename) the preference files or, if using the Alt, Ctrl, and Shift method, be sure that you get a confirmation dialog.
This resets all settings in Photoshop to factory defaults.
A complete uninstall/re-install will not affect the preferences and a corrupt file there may be causing the problem.

Error: "Could not complete the requested operation" when you start Illustrator CS2 (Windows XP)

Hi everybody i'm nick from KL Malaysia, i having a problem with my Illustrator CS2 problem can't solved it, someone can help me?
My problem is when i open lllustrator after load finish the file thn will come out Error: "Could not complete the requested operation", i dunno y?
Have someone same problem with me anot? got any stion to solved it?

Nick,
The first thing to try is to
a) Ctrl/Cmd+Alt/Option+Shift during startup,
or (if a) does not work)
b) Move the folder
a) is easy but irreversible, b) is more thorough and reversible, so if you like your settings and do not want to destroy them in vain, use b).

Illustrator CS5.1 will not open on OS X Lion 10.7.5 - "Could not complete the requested operation."

Out of the blue, I can't get my Illustrator CS5.1 application to open. Instead the app icon bounces on the dock and the message "Could not complete the requested operation." appears.
I have tried restarting the application, restarting the computer, I have tried holding Command+Option+Shift while opening, I have tried various methods of editing the "Adobe Illustrator CS5.1 Settings" folder, I have tried moving other application folders and font folders, all without success.
The application is installed on a computer in my office and was installed as a downloadable upgrade to CS4. I was thinking a solution might be to install Illustrator, but I haven't been able to find a link to the CS5 program downloads.
Today I tried to get help from Adobe Customer Support, who informed me that they no longer support CS5 and directed me to the forums instead. Any solutions???

Hi,
It was never completely clear whether it was just hidden or whether Apple ran a download page for iChat 6.
As the Download for Messages Beta was separate and "Deleted" iChat it would seem it would be another download for iChat 6.
iMessages will not function as it is only an Account type within Messages and iChat 6 does not have it.
Therefore messages on the iPhone will not sync to the Mac. (until you get Mountain Lion and Messages in that OS X version).
Mountain Lion and it's full version of Messages will not sync the iMessages that have happened in between the 14th December 2012 (end date of Messages beta) and the Install of Mountain Lion if you decide on that route.
8:51 PM Sunday; May 5, 2013
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.3)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Adobe Indesign could not complete the conversion

Hi!
I updated from CS6 to CC this fall, and today I'm trying to open several documents created in CS6 but with no luck Get this error meassage: "Adobe indesign could not complete the conversion because the data in the file did not match what was expected"
Do I have to install CS6 again to manage to open the file? Or what do I do? Hopefully the file isn't completely destroyed....
Hoping to get some help

Peter Kahrel has a batch conversion script at Free script Batch convert/export InDesign documents | Peter Kahrel that you can run to do the export on entire folders of documents at once. Run it in the old version.
But in my opinion, since you can have CS6 installed at the same time, there's really no reason to convert most of your files unless they are projects that are ongoing and get edited time after time, and even then probably not. Re-use of docs by doing a Save As to a new version for things like magazines is likely to eventually lead to document failure due to creeping minor corruption that at some point accumulates to the point of not being minor. We see a lot of reports of recycled files that suddenly don't work after 30 or 40 (or some other number) of generations. There is no excuse for not making templates for this sort of job and using the template to start each iteration.

Windows could not complete the installation. To install Windows...

I have a G62-340US that had a hard drive crash. I installed a new hard drive and used the HP Restore Disks. The laptop will go through the boot process and Windows will give a message" Setting up system for first time use" or something to that affect. A diolog box then comes up and says "Windows could not complete the installation. To install Windows on this computer, restart the installation." If I hit enter, I am caught in a loop. I can control-alt-del and kill audit.exe and bring up the system. However, everytime I reboot, I get the above error.
The system is running Win7 64 bit.
Any ideas on how to complete this installation and move forward?
Also, the HDD is 320 gb but the system is only recognizing 68 gb.
Thanks for your assistance!

Hi:
That happened to me too and I tried twice to get the disks to work and the failure occurred at the same place.
If you bought a new hard drive of at least the same size in GB as the old one, the disks should have worked.
There is no telling why they don't and many folks have issues with the recovery disks for one reason or another.
Fortunately there is a method you can use to get W7 back on your PC if you can read the full 25 character windows product key on the bottom of your PC.
Here's what you can do...
If you can read the 25 character Microsoft windows 7 product key, you can download plain Windows 7 ISO files to burn to a DVD for the version of windows that came installed on your PC, and that is listed on the Microsoft COA sticker on your PC's case.
Burn the ISO using the Burn ISO option on your DVD burning program and burn at the slowest possible speed your program will allow. This will create a bootable DVD.
Or use the Windows 7 USB/DVD installation tool to compile the ISO file you download from Digital River. Link and instructions below. You need a 4 GB flash drive to use the USB method of compilation.
http://www.microsoftstore.com/store/msstore/html/pbPage.Help_Win7_usbdvd_dwnTool
Use the 25 character product key on the PC to activate the installation.
The key will activate either a 32 or 64 bit installation.
Then go to the PC's support and driver page to install the drivers you need.
Link to the W7 ISO file downloads is below.
http://www.mydigitallife.info/official-windows-7-sp1-iso-from-digital-river/
Paul

When I plug in my iPhone to sync, it starts but does not complete the process and several pieces of data are not being transferred to my iPhone from my MacBook Air.

Problem:
When I plug in my iPhone to sync, it starts but does not complete the process and several pieces of data are not being transferred to my iPhone from my MacBook Air.
Any help that you can provide in helping my iPhone accurately sync with iPhoto and iTunes will be greatly appreciated.
Symptoms:
1)   Sync: It’s not completing the sync. Below, I’ve provided all of my settings from the iTunes Summary tab so that you might tell me if I’ve selected any incorrect options. I prefer to sync the “old school” way – by connecting to the computer – as opposed to syncing over the cloud. Perhaps this is what’s causing the problem? Here is a list of the steps displayed in the iTunes window as the sync progresses:
waiting for sync to start (step 1 of 7)
backing up (step 2 of 7)
preparing to sync (step 3 of 7)
determining apps to sync (step 4 of 7)
preparing apps to sync (step 5 of 7)
importing photos (step 6 of 7)
waiting for changes to be applied (step 7 of 7)
syncing apps / copying 1 of 4 (App name) (step 7 of 7)
canceling sync
apple icon
2)   Photos: I've selected only certain of my iPhoto albums to sync to my iPhone. All of the albums are correct/complete in iPhoto. All of the albums are listed on my iPhone, both before and after the sync, but the albums are empty (no actual photos) before and after the sync. Perhaps this is tied to the fact that the sync isn’t completing, but because “importing photos” is one of the steps that the incomplete sync displays, I don’t know.
3)   Apps: When I launch iTunes and click on the Apps folder under the Library listing, then click on the Updates tab, iTunes searches for any Apps needing to be updated and provides a list. If I click on Update All, the Apps are successfully updated in iTunes. But, when I plug in my iPhone so that the updates will transfer to the apps on my iPhone, the updates don’t transfer to the apps on my iPhone and those apps still reflect that they need updating on the iPhone.
Other Potential Pertinent Info:
The flash memory hard drive on my MacBook Air recently died (perhaps a month or two ago). Apple had emailed me about a known issue and literally the next day, my MacBook Air crashed. I installed a new flash memory drive and re-installed everything from a backup off of an external hard drive. Everything seems to be working fine; it recreated accurately all of my software and data, including iPhoto and iTunes, the pictures and songs (respectively) for which are stored on that hard drive, as opposed to being on the flash memory in the MacBook Air itself. However, I don’t recall if the start of the sync problem described herein started happening at the same time that I replaced the flash memory drive. All I know is that the computer is working perfectly in all respects and that even as the sync is failing, it at least says that it’s doing the right things and looking in the right places (e.g., the list of albums on my iPhone matches the list of albums in iTunes, etc.).
Settings/Status:
MacBook Air
OSX v. 10.9
iPhoto ’11 v. 9.5 (902.7)
iPhone iOS 7.0.4
iTunes v. 11.1.3 (8)
Summary Tab
Backups (This Computer)
Options
Automatically sync when this iPhone is connected
Sync only checked songs and videos
Photos Tab
Sync Photos from iPhoto (429 Photos)
Selected albums, Events, and Faces, and automatically include (no Events)
Albums – 9 are selected

You need to download iTunes on your computer. iOS 6 requires the latest version of iTunes which is 10.7.

Error message "could not complete the video frames to layers command because dynamiclink is not avai

So I decided to try my hand at making gifs and so I attempted to upload a video by going to file -> import -> video frames to layers. Before even letting my pick my video it comes up with an error message saying "could not complete the video frames to layers command because dynamiclink is not availible." I then tried file -> open -> and then selected the video and no matter what file type or size I chose I ended up with the same error message.
I looked this problem up and attempted some of the solutions but to no avail. I tried clearing my preferences and restarting photoshop many times in addition to restarting my computer. I also checked to make sure it wasn't being blocked by any firewalls and it wasn't. My opperating system is Windows 7 and I'm using photoshop cs6. I've looked everywhere for an answer to this problem so if anyone is able to help me solve this problem I'd be much obliged.

You see my C:\ drive is quite small as it's a SSD, so I made Adobe install programs on my E:\ drive too, however this was the main cause for Adobe not to function.
After adjusting the settings to install everything back to my C:\ drive, it fixed my issue above and allowed me to run the 64bit version.

HT201210 I tried to update my Iphone 4S & was sent an error message telling me to restore my phone & did so & now my phone is unable to be used because it will not complete the restoring process & is locked in this screen not letting me use it at all.

I was trying to update my software to on my phone and it would not let me do so sending me a message to restore my phone before I can complete an update so I did this but it would not complete the restore and was sent another message stating that my phone is already in recovery mode and a restore needs to be completed before I can update any software. I have tried this four times now and my phone screen is stuck with the Itunes symbol on it along with a picture of the plug. It will not let me eject or do absolutely anything. I cannot use my phone at all. I have even tried to shut it down and turn it back on which still did not help.

and error code or the exact msg would help

ITunes 12.0.1 now just "hangs" and does not complete the sync with my iPhone (iOS 6.1.6).

Hello all,
I've seen similar posts earlier in Apple discussions, but I haven't come across a definitive answer yet…So, let me ask again:
Up until 6-7 hours ago, iTunes 12.0.1 was working perfectly well including syncing with my iPhone (I use an oldie but a goodie and it suits my purposes, iOS 6.1.6, 3GS). Specifically iTunes now "hangs" and will not complete the syncing process with my iPhone. It get to "2 of 6" in the backing up process, and then the spinning beach ball appears. I keep my iTunes library on a separate external HD (USB).
Even if I only want to launch iTunes 12 to use it (and NOT sync), the application freezes.
In similar posted questions, "Linc Davis" has asked that the user run a diagnostic using the Terminal utility. I have done this, and I paste the results below.
Any help with this is appreciated!
System Version: OS X 10.8.5 (12F45)
Kernel Version: Darwin 12.5.0
Boot Mode: Normal
Model: MacBookPro6,2
USB
   USB Optical Mouse (KYE Systems Corp.)
System diagnostics
   2014-11-06 iTunes hang
   2014-11-06 iTunes hang
   2014-11-06 iTunes hang
   2014-11-06 iTunes hang
   2014-11-06 iTunes hang
   2014-11-06 iTunes hang
   2014-11-06 iTunes hang
   2014-11-06 iTunes hang
   2014-11-06 iTunes hang
   2014-11-06 iTunes spin
User diagnostics
   2014-10-26 DiskAid crash
   2014-11-03 CalendarAgent crash
Kernel messages
   Nov 4 00:58:33   wl0: Roamed or switched channel, reason #2, bssid 4a:xx:xx:xx:xx:70 (note: I blocked these numbers out)
   Nov 4 09:11:52   SIOCPROTODETACH_IN6: utun0 error=6
   Nov 4 09:26:03   wl0: Roamed or switched channel, reason #8, bssid 4a:xx:xx:xx:xx:70
   --- last message repeated 5 times ---
   Nov 5 00:53:48   IOAudioStream[0xffffff8020a0b200]::clipIfNecessary() - Error: attempting to clip to a position more than one buffer ahead of last clip position (1,464)->(2,668).
   Nov 5 00:58:25   IOAudioStream[0xffffff8020a0b200]::clipIfNecessary() - Error: attempting to clip to a position more than one buffer ahead of last clip position (1,444)->(2,644).
   Nov 5 02:48:38   IOAudioStream[0xffffff8020a0b200]::clipIfNecessary() - Error: attempting to clip to a position more than one buffer ahead of last clip position (1,440)->(2,640).
   Nov 5 02:48:38   wl0: Roamed or switched channel, reason #8, bssid 4a:xx:xx:xx:xx:70
   --- last message repeated 1 time ---
   Nov 5 02:51:16   IOAudioStream[0xffffff8020a0b200]::clipIfNecessary() - Error: attempting to clip to a position more than one buffer ahead of last clip position (1,420)->(2,620).
   Nov 5 08:10:45   SIOCPROTODETACH_IN6: utun0 error=6
   Nov 5 08:26:07   wl0: Roamed or switched channel, reason #8, bssid 4a:xx:xx:xx:xx:70
   Nov 5 10:09:50   smb_ntstatus_error_to_errno: Couldn't map ntstatus (0xc0020050) to errno returning EIO
   Nov 5 12:43:34   SIOCPROTODETACH_IN6: utun1 error=6
   Nov 5 12:46:11   wl0: Roamed or switched channel, reason #8, bssid 4a:xx:xx:xx:xx:70
   Nov 5 16:55:00   SIOCPROTODETACH_IN6: utun1 error=6
   Nov 5 21:51:41   IOAudioStream[0xffffff8010256400]::clipIfNecessary() - Error: attempting to clip to a position more than one buffer ahead of last clip position (1,418)->(2,618).
   Nov 5 21:52:04   IOAudioStream[0xffffff8010256400]::clipIfNecessary() - Error: attempting to clip to a position more than one buffer ahead of last clip position (1,658)->(2,858).
   Nov 5 21:53:44   IOAudioStream[0xffffff801567f000]::clipIfNecessary() - Error: attempting to clip to a position more than one buffer ahead of last clip position (1,478)->(2,678).
   Nov 5 21:54:28   IOAudioStream[0xffffff801567f000]::clipIfNecessary() - Error: attempting to clip to a position more than one buffer ahead of last clip position (1,458)->(2,658).
   Nov 5 22:00:05   SIOCPROTODETACH_IN6: utun1 error=6
   Nov 5 22:08:48   IOAudioStream[0xffffff80180a4200]::clipIfNecessary() - Error: attempting to clip to a position more than one buffer ahead of last clip position (1,40c)->(2,60c).
   Nov 5 22:31:57   SIOCPROTODETACH_IN6: utun1 error=6
   Nov 5 23:01:19   wl0: Roamed or switched channel, reason #8, bssid 4a:xx:xx:xx:xx:70
   Nov 6 00:01:42   SIOCPROTODETACH_IN6: utun0 error=6
Loaded extrinsic kernel extensions
   com.freecom.driver.BoulderScsi (1.0.0d1)
Extrinsic daemons
   com.bitdefender.CoreIssues
   com.bitdefender.Daemon
   com.bitdefender.UpdDaemon
   com.wdc.WDSmartWareServer
   com.wdc.WDDMservice
   com.trusteer.rooks.rooksd
   com.sonycorporation.BloggieInstallerAgent
   com.oracle.java.JavaUpdateHelper
   com.microsoft.office.licensing.helper
   com.cisco.anyconnect.vpnagentd
   com.bitdefender.upgrade
   com.bitdefender.AuthHelperTool
   com.adobe.fpsaud
Extrinsic agents
   com.trusteer.rapport.rapportd
   com.sony.BloggieSoftware.AutoRun
   com.cisco.anyconnect.gui
   com.bitdefender.antivirusformac
   com.Livestation
   com.google.keystone.user.agent
   com.divx.agent.postinstall
   com.adobe.ARM.UUID
launchd items
   /Library/LaunchAgents/com.bitdefender.antivirusformac.plist
    (com.bitdefender.antivirusformac)
   /Library/LaunchAgents/com.cisco.anyconnect.gui.plist
    (com.cisco.anyconnect.gui)
   /Library/LaunchAgents/com.sony.BloggieSoftware.AutoRun.plist
    (com.sony.BloggieSoftware.AutoRun)
   /Library/LaunchAgents/com.trusteer.rapport.rapportd.plist
    (com.trusteer.rapport.rapportd)
   /Library/LaunchDaemons/com.adobe.fpsaud.plist
    (com.adobe.fpsaud)
   /Library/LaunchDaemons/com.bitdefender.AuthHelperTool.plist
    (com.bitdefender.AuthHelperTool)
   /Library/LaunchDaemons/com.bitdefender.upgrade.plist
    (com.bitdefender.upgrade)
   /Library/LaunchDaemons/com.cisco.anyconnect.vpnagentd.plist
    (com.cisco.anyconnect.vpnagentd)
   /Library/LaunchDaemons/com.microsoft.office.licensing.helper.plist
    (com.microsoft.office.licensing.helper)
   /Library/LaunchDaemons/com.oracle.java.JavaUpdateHelper.plist
    (com.oracle.java.JavaUpdateHelper)
   /Library/LaunchDaemons/com.sonycorporation.BloggieInstallerAgent.plist
    (com.sonycorporation.BloggieInstallerAgent)
   /Library/LaunchDaemons/com.trusteer.rooks.rooksd.plist
    (com.trusteer.rooks.rooksd)
   /Library/LaunchDaemons/com.wdc.WDDMservice.plist
    (com.wdc.WDDMservice)
   /Library/LaunchDaemons/com.wdc.WDSmartWareServer.plist
    (com.wdc.WDSmartWareServer)
   Library/LaunchAgents/com.adobe.ARM.UUID.plist
    (com.adobe.ARM.UUID)
   Library/LaunchAgents/com.apple.AddressBook.ScheduledSync.PHXCardDAVSource.UUID. plist
    (com.apple.AddressBook.ScheduledSync.PHXCardDAVSource.UUID)
   Library/LaunchAgents/com.apple.AddressBook.ScheduledSync.PHXCardDAVSource.UUID. plist
    (com.apple.AddressBook.ScheduledSync.PHXCardDAVSource.UUID)
   Library/LaunchAgents/com.divx.agent.postinstall.plist
    (com.divx.agent.postinstall)
   Library/LaunchAgents/com.google.keystone.agent.plist
    (com.google.keystone.user.agent)
   Library/LaunchAgents/com.Livestation.plist
    (com.Livestation)
Extrinsic loadable bundles
   /System/Library/Extensions/acsock.kext
    (com.cisco.kext.acsock)
   /System/Library/Extensions/BoulderScsi.kext
    (com.freecom.driver.BoulderScsi)
   /System/Library/Extensions/WD1394HPDriver.kext
    (com.wdc.driver.1394HP)
   /System/Library/Extensions/WDUSBHPDriver.kext
    (com.wdc.driver.USBHP)
   /Library/Audio/Plug-Ins/Components/Flip4Mac WMA Import.component
    (net.telestream.wmv.import)
   /Library/Internet Plug-Ins/AdobePDFViewer.plugin
    (com.adobe.acrobat.pdfviewer)
   /Library/Internet Plug-Ins/AdobePDFViewerNPAPI.plugin
    (com.adobe.acrobat.pdfviewerNPAPI)
   /Library/Internet Plug-Ins/DivXBrowserPlugin.plugin
    (com.divx.DivXBrowserPlugin)
   /Library/Internet Plug-Ins/Flash Player.plugin
    (com.macromedia.Flash Player.plugin)
   /Library/Internet Plug-Ins/Flip4Mac WMV Plugin.plugin
    (net.telestream.wmv.plugin)
   /Library/Internet Plug-Ins/iPhotoPhotocast.plugin
    (com.apple.plugin.iPhotoPhotocast)
   /Library/Internet Plug-Ins/JavaAppletPlugin.plugin
    (com.apple.java.JavaAppletPlugin)
   /Library/Internet Plug-Ins/SharePointBrowserPlugin.plugin
    (com.microsoft.sharepoint.browserplugin)
   /Library/Internet Plug-Ins/SharePointWebKitPlugin.webplugin
    (com.microsoft.sharepoint.webkitplugin)
   /Library/Internet Plug-Ins/Silverlight.plugin
    (com.microsoft.SilverlightPlugin)
   /Library/Internet Plug-Ins/SonyOnlineMediaEngine.bundle
    (com.sony.sonyonlinemediaengine)
   /Library/Internet Plug-Ins/TVUPlugin.webplugin
    (com.tvunetworks.TVUPlugin)
   /Library/PreferencePanes/Flash Player.prefPane
    (com.adobe.flashplayerpreferences)
   /Library/PreferencePanes/Flip4Mac WMV.prefPane
    (net.telestream.wmv.prefpane)
   /Library/PreferencePanes/RapportPreferences.prefPane
    (com.trusteer.RapportPreferences)
   /Library/QuickTime/Flip4Mac WMV Advanced.component
    (net.telestream.wmv.advanced)
   /Library/QuickTime/Flip4Mac WMV Export.component
    (net.telestream.wmv.export)
   /Library/QuickTime/Flip4Mac WMV Import.component
    (net.telestream.wmv.import)
   /Library/Spotlight/GBSpotlightImporter.mdimporter
    (com.apple.garageband.spotlightimporter)
   Library/Address Book Plug-Ins/SkypeABDialer.bundle
    (com.skype.skypeabdialer)
   Library/Address Book Plug-Ins/SkypeABSMS.bundle
    (com.skype.skypeabsms)
Extrinsic shared libraries
   /usr/lib/libgutenprint.2.dylib
   /usr/lib/sqlite/libtclsqlite3.0.dylib
Global login items
   /Library/Application Support/WDSmartWare/WDQuickView.app
User login items
   Dropbox.app
   GREEN BUTTON.app
   SpeechSynthesisServer.app
Safari extensions
   Ghostery
   Facebook Disconnect
   Twitter Disconnect
   DivXHTML5
   TrafficLight
Restricted user files: 21
Font problems: 40
Bad plists
   Library/Preferences/com.apple.iphotomosaic.plist
Desktop file count: 25
Elapsed time (s): 75

Dear Linc,
Thanks, once again, for repeating yourself by sending me the message above (a message you have sent to MANY users with this problem)!
However, you give me this great opportunity to say two things: 1) YAHOO! I fixed the problem, and 2) I want to share how I did so because I hope it helps others.
With the help of reading info at this website http://osxdaily.com/2011/09/22/fix-the-itunes-library-itl-cannot-be-read-version -error-when-downgrading-itunes/, I followed this procedure:
1) I deleted the iTunes 12.0.1 app from my computer
2) In addition, in reading related details at the website above (i.e., by clicking on links on the page AND scrolling to the very bottom to view links to related articles), in my iTunes library folder, I changed MY CURRENT "iTunes Library.itl" to "iTunes Library.old", as the website advises. The current .itl file was the one being used by the iTunes app I had just deleted from my computer.
3) I went to the "Previous iTunes Libraries" folder and dragged a copy of the second-most recent .itl file to my desktop (for me, this file was "iTunes Library 2014-07-23.itl").
4) I re-named it to "iTunes Library.itl"
5) I then dragged a copy of the file in step #4 to my iTunes folder (the folder in which you now also have the "iTunes Library.old" file).
6) I closed all remaining apps on my computer that were opened and I restarted it.
7) Now, you don't have any iTunes app on your computer, so I downloaded a .dmg of iTunes 12.0.1.26 and installed the app (for example, you can download from here: http://www.macupdate.com/app/mac/5661/apple-itunes.
8) Once installed, I opened iTunes and immediately I got the dialogue box, "updating iTunes library" -- THIS TOOK FOREVER AS I HAVE CLOSE TO 1,000 SONGS + OTHER ITEMS IN MY LIBRARY!
9) I patiently waited until the library update completed, but it DID COMPLETE.
10) Viola! iTunes 12 is not "hanging" (or freezing) any longer. I can navigate around the application.
CAVEATS:
1) Before I first deleted "the corrupted" iTunes 12, I was able to open the Preferences panel, go to "Devices", and check the box that stops the app from syncing with my iPhone. This setting seemed to carry over; thus, I have not tried to sync yet…WISH ME LUCK!
2) After going through steps 1-10 above, I didn't immediately have Internet Radio available in the application (i.e., I didn't see it), but it is now showing up and it works! I just had to wait for a few minutes...
3) I also use iTunes Match, but I haven't turned it on yet in the newly installed app. On the iTunes Match page, it says, "Add this computer" or "No thanks". So, the app is behaving as if I'm just beginning to use iTunes Match for the first time. Later, I will click on "Add this computer", and I hope it goes smoothly!
4) This isn't a caveat, but I think I should say: my iTunes library is on an external USB HD (I have to say THANK GOD for that). Obviously, this has implications for doing steps 2 to 5 above. The newly installed iTunes 12 app had no trouble in finding where my library is (I had it set up this way back when I was using iTunes 10).
5) One last piece of advice: Make sure that when you plug your iPhone into any other computer only to re-charge but the iTunes app on that computer wants to sync with your phone, you DON'T let it sync. First, you should go to Preferences in the iTunes app and click on "Devices". Then check the box that says, "Prevent iPods, iPhones,…….from syncing automatically." After that, you would be able to plug in your iPhone to another computer to re-charge it.
FINALLY: I THANK EVERYONE WHO WAS WILLING TO SUGGEST SOLUTIONS TO ME REGARDING THIS PROBLEM! I see that MANY users are having this difficulty, so I thought it would be fair for me to share how I resolved the issue -- my iTunes is running fine now...

"Time Machine could not complete the backup. The backup disk is not availab

I have a Seagate 750 MB external disk connected to the USB port of my Airport Extreme Base Station. It worked fine with Time Machine under Leopard but it's not working the way it was under OS X 10.6.2. I'm hopeful someone can help me solve the problem.
Let's say the name of my Airport Extreme Base Station is "Airport." If I remember correctly, under Leopard time machine would start a wireless backup not long after I turned on the Seagate drive. That no longer happens.
I've erased and re-formatted the Seagate drive with 2 GUID partitions, one for my 24" iMac and one for my 17" MacBook Pro. Both computers are about 3 years old. In order to do the re-partitioning, I had to unplug the Seagate drive from the base station and plug it into one of the iMac's USB ports. If I didn't do this, nothing other than the iMac's drive appears in the left pane of Disk Utility, although the name of my base station, i.e, "Airport" does appear in the Finder and PathFinder (a replacement for Finder that I use).
In fact, Time Machine works under 10.6.2. as long as the Seagate drive is plugged into the iMac's USB port. As soon as I plug the Seagate drive into the USB port of the base station, Time Machine no longer works. The backup is "delayed." When I click on "Back Up Now" a few seconds go by and I get the following dialog box: "Time Machine could not complete the backup. The backup disk is not available."
In my Airport Extreme Base Station setup (Airport Utility version 5.4.2), the "Disks" pane sees both partitions on the Seagate drive. File sharing is enabled on the "File sharing" pane and "Secure Shared Disks:" is set to "With a disk password." "Airport Disks Guest Access:" is not allowed, nor is "Share disks over WAN."
When the Seagate drive is plugged into the base station and I click on "Airport" in the Finder or PathFinder, I'm prompted for the password I mentioned above because the shared disks are secured with a password. Once the password is typed, both partitions on the Seagate drive appear in Finder and PathFinder. When I try a Time Machine backup at this point, I get the same error I described above, i.e., "Time Machine could not complete the backup. The backup disk is not available."
One last thing, I did an "Archive and Install" when I upgraded to Snow Leopard since I thought the changes were relatively minor as compared with past OS X upgrades. Normally, I do a clean install but didn't feel like it this time. I also tried deleting the file /Library/Preferences/com.apple.TimeMachine.plist to no avail and restarted my iMac to no avail.
At this point I'm completely stumped. As I said, Time Machine works as long as the Seagate drive is plugged directly into one of the iMac's USB ports as opposed to the base station's USB port. But doesn't this defeat the purpose of having wireless backup? Once again, the wireless backup worked fine under 10.5.8.
I hope my message is clear and a solution would be most welcome.
Thank you,
Richard

I'm having the same problem. If my TimeMachine drive is not connected, I'll get the "Time machine could not complete the backup" "The backup disk is not available" warning a couple times a day. This is extremely problematic if I'm giving a presentation. I have tried changing my TimeMachine drive, removing that drive, repairing permissions, and have not been able to solve the problem.
Please help!

HT3669 My Epson Perfection 1200 scanner functions as a flatbed scanner but when I try to scan transparencies the control panels change in Image Capture but the scanner bar will not complete the overview scan & cannot travel beyond the first 2/3 centimet

Epson Perfection 1200 scanner continues to function as a flatbed scanner but when I try to scan transparencies/film negs the control panels change in Image Capture but the scanner bar will not complete the overview scan & cannot travel beyond the first 2/3 centimeters. All the communications seem to recognise the scanner and the mode for the intended scan but the necessary overview scan is not completed, nothing comes up on the Image Capture scan window. If I unplug the film adaptor I can get a document scan. When I plug in the adaptor again the Image Capture details change which allows me to select the type of scan required but when the scanner attempts an overview scan it is unable to complete it.
I have had the scanner from new (12 Years) and have previously scanned slides and film with the adaptor but maybe this was before I upgraded my computer (imac 27").
Do I have to buy a new scanner? It seems so close to working correctly.
I have downloaded the Epson recommended driver (5.4) and have Epson Perfection 1200 6.6 Universal showing in the Applications List.
Any thoughts or observations would be much appreciated before I go out and spend money an new hardware.
Thanks

I have same issue - have you solved this yet?

IE not completing the destroy() method

Similar Messages

Maybe you are looking for