If content is created using CC can it be made SCORM complaint

If anybody has answer to above question please let me know

See if this thread helps.
http://forums.adobe.com/message/4333519
I would first talk to OnOne or see if they have user to user support forums.
If they can't help, sadly it might not be do-able.
Gene

Similar Messages

  • Scorm Content Not Created in Presenter

    I have some existing content that i would like to run in
    Breeze. When i try to upload the zipped SCORM package, it wont
    recognise the zip, despite zip being an accepted file format. The
    only thing i can see in the guidance that might be an issue is that
    the package files are different and Breeze/Connect requires an
    index.html doc, but this is not how the content is packaged in the
    content i have.
    Has anyone got experience of using content not created using
    Presenter? Will it work?

    Breeze / Connect Training does not support a SCORM package.
    See more in this post:
    http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?catid=394&threadid=1117904

  • Is it possible to maintain versioning of portal contents edited/created ?

    Have few doubts about weblogic portal 9.2
    1]Is it possible to maintain versioning of portal contents edited/created?
    2]Can portal presentation mechanism hide selected output fields?
    3]How will Presentation service support storage of view state in a repository?

    Mr.Raja
    As far as my knowledge, it does NOT make sense to assign a material to more than one class type.
    We can assign many classes to  a single class type of  a material.
    For configurable material, create the material using material type : KMAT.
    & then, activate the 'batch management" control in the material master, for that material.
    Pls revert with feedback.
    Hope, that helps you.
    Rgds
    Sumanth.Gururaj
    Consultant/Systems Analyst - SAP SD/MM

  • The account application created using can see current Blank Site page but no other user account see current page only some old page?

    Hello Community
        Using Sharepoint 2010 Server and the UI, building an intranet
    starting with a Blank Site and then adding subsites can be accomplished.
        However, in this case the current Blank Site page that was created only shows
    when logged in using the account that the application was created under.
        Any other account used to login with when the url is typed into the
    address bar does not show the current Blank Site page.
       Instead when using any other account the page that is returned is
    some page that was created early in in the creation of the site.
        A Blank site is said to be:
            "A blank site for you to customize based on your requirements."
        I checked-in the v4.master and approved it but the problem still exists.
        Then I checked the Site Collection features under Site Collection
    Administration "Active" contains:
        Sharepoint Server Publishing Infrastucture
        Sharepoint Server Standard Site Collection features
        Then I checked under Site Actions has Manage Site features "Active"
    contains:
        Sharepoint Server Publishing
        Sharepoint server Standard Site features
        It is said that maybe the page needs to be "Published".  Basically
    this is a Blank Site page so when the instructions says:
       "To publish a page, on the page that you are editing, on the
    Page Editing toolbar, click Publish."
        I am unable to do it because when I:
           "Edit Page"
        There is not no option on the ribbon to choose "Publish".
        Neither did I see the "Publish"option when editing the v4.master in SPD.
        In summary, when logged in with the account that everything was created
    under I can see the current Blank Site with the Lists and everthing else
    on the page but how come when I login with any other user account
    I don't see the current Blank Site page but instead see some old page that
    I may have created earlier when creating the application?
        Thank you
        Shabeaut

    Hello Community
        I think it is worth mentioning that the Top Link Bar shows what appears
    on the current Blank Site page but it is the OOTB NoteBoard  and Discussion Board
    List which both reside in Left web part on the Blank Site page that has been replaced
    on the page by what had been in an old Content Editor web part during early creation.
        How can I grant permissions to the OOTB NoteBoard and the Discussion Board List
    that would allow other user accounts to see them, thus making the entire current Blank Site page
    visible other user accounts?
        Thank you
        Shabeaut

  • HT4168 I have created an 100 page booklet in Pages, with many photographs, can I export it to ePub, and make an electronic book, because it says that "Note: The Pages document must have been created using a word processing template"?

    I have created an 100 page booklet in Pages, with many photographs, and much written word, can I export it to ePub, and make an electronic book, because it says that "Note: The Pages document must have been created using a word processing template"?....
    Basically what I want to do is publish the document into both an eDocument, and a hard copy document. What is the best way to do this?

    No Peter, this statement came right off the Apple ePub statement when outlining how to use ePub. the full context is:
    Creating ePub files with Pages
    Summary
    Learn how to create ePub files with Pages.
    Products Affected
    Pages '09
    ePub is an open ebook standard produced by the International Digital Publishing Forum. Pages ’09 lets you export your documents in ePub format for reading with iBooks on iPhone, iPad, or iPod touch.
    iBooks supports both ePub and PDF file formats, and you can export both from Pages.
    When to use ePub or PDF
    Use ePub when text is the most important part of your document, for example when you create a book, a report, a paper, a thesis, or classroom reading material.
    More details on using ePubUse PDF when layout is the most important part of your document, for example when you create a brochure, a flyer, or a manual with multiple illustrations.
    More details on using PDF
    Creating an ePub Document to Read in iBooks
    You can export any Pages word processing document to the ePub file format for reading in an ePub reader, such as the iBooks application on the iPad, iPhone, or iPod touch. Documents created in page layout templates can’t be exported to the ePub format.
    Documents exported to ePub format will look different than their Pages counterparts. If you want to get the best document fidelity between the Pages and ePub formats, style your Pages document with paragraph styles and other formatting attributes allowed in an ePub file. A sample document is provided on the Apple Support site that features styles and guidelines to help you create a Pages document that’s optimized for export to the ePub file format, which you can use as a template or a guide. To learn more about using paragraph styles in Pages, see the topics under the heading “Working with Styles” in the Pages built-in help.
    To read your ePub document in iBooks on your mobile device, you must transfer the ePub file that you create onto your device.
    To use the “ePub Best Practices” sample documentTo learn more about using the ePub format and get a better feel for how a Pages document might appear as a book in iBooks, it’s a good idea to download the “ePub Best Practices” sample document. After reading the guidelines and instructions within the document, you can use it as a template to create your own document. You can also import the styles from the sample document into a new document you create.
    Download the “ePub Best Practices” sample document at the following web address:
    http://images.apple.com/support/pages/docs/ePub_Best_Practices_EN.zip
    Do either of the following:Use the sample document as a template.Import the paragraph styles from the sample document into a new or existing Pages document.
    Export the document you create to ePub format to see how it looks in iBooks.
    Preparing an existing Pages document for export to ePub format
    Documents exported to the ePub format automatically appear with page breaks before every chapter. A table of contents is automatically generated, which allows readers to jump quickly to any chapter title, heading, or subheading in the book. In order to create a meaningful table of contents, it’s important to apply appropriate styles within your document. The ePub reader uses the paragraph styles to determine which items should appear in the table of contents for your book.
    Note: The Pages document must have been created using a word processing template.

  • Can I move content to ATV using drag and drop?

    Sorry if this question was asked before. Please point me to it if it is, coz I couldn't find it.
    The situation:
    Here's what I am asking for. I have about 400GB of media and many real specific playlists used in the family.
    Now I want to have about 20GB of that on ATV.
    The problem:
    The only way to move the 20GB as I see it right now is to sync the content by creating playlists. And my playlists DO NOT match the content I want to move.
    For eg; I want to move all of ledzeppelin to ATV. Its outrageous that I have to create a playlist called LZ just to move it to ATV.
    Is there any way I can drag/drop selected content to ATV just like I do on my IPOD? Am I doing something wrong?
    Any other ideas?

    Actually, I have an update. Finally yesterday night I spent 2 hours creating Artist playlists for ATV syncing. And I created a seperate folder to keep it away from our family playlists.
    However, when I go to the syn window, it does not display a folder structure so all my playlists are mixed and sorted in ascending order!!!!!11 @#$@#$#$#$^ Geezzz!!
    Come on apple! This is really dissapointing and I hope apple fixes this ASAP.

  • I recently created a video in iMovie that I later uploaded to YT. I had a message from YT a day later saying that the music I used in my video was detected as 3rd party content. I used music found in the music and sound effect section. What happened?

    I recently created a video in iMovie that I later uploaded to YT. I had a message from YT a day later saying that the music I used in my video was detected as 3rd party content. I used music found in the music and sound effect section. The artist is listed as Apple Inc. What happened?
    This is the message I received:
    Your video may include the following copyrighted content:
    Disputed claims 
    "Kadeem UIM-Trust Issues (Instrumental)", sound recording administered by:INgrooves Your dispute awaiting response by 12/08/12
    What does this mean?
    After your dispute has been submitted, your video will soon be available on YouTube without ads for third parties. This is a temporary status and might change at any time.Learn more about copyright on YouTube.

    This question comes up from time to time. YouTube and Facebook are both wrong.
    There are a number of con-men who think that they can earn a quick buck from claiming that they own the copyright to Apple’s royalty-free jingles and sound effects included with the iLife applications. These are all free to use, as clearly stated in section 2.C of the iLife Software License Agreement:
    “You may use the Apple and third party audio content (“Audio Content”) contained in or otherwise included with the Apple software, on a royalty-free basis, to create your own original soundtracks for your video and audio projects. You may broadcast and/or distribute your own soundtracks that were created using the Audio Content, however, individual samples, sound sets, or audio content may not be commercially or otherwise distributed on a standalone basis, nor may they be repackaged in whole or in part as audio samples, sound files, sound effects or music beds.”
    http://images.apple.com/legal/sla/docs/ilife09.pdf
    You should this (also providing the above link) when following the dispute process with YouTube.

  • Can I add Custom Content Type created programmatically to Custom List Definition?

    I have created Custom content type programmatically in the Feature Receiver. Followed by this have another feature which creates List Template. I want to add the custom content type to the list template.
    Using VS 2012, I added the custom content type to the list definition. The Schema.xml for the list definition looks as below:
    <ContentTypes>
    <ContentTypeRef ID="0x010100D7D9F4B1F4A9684BB44389571024B2EC00C393BB21B8AD7B41B62A87DF0501504D" />
    </ContentTypes>
    ID was automatically added by the VS tool.
    List Template is created, the new content Type is also added, but the Name is displayed as "Document" instead of the custom content type name. So I see two CTs with the name "Document".
    How can I achieve this? Any help is appreciated.

    Hi,
    Please add EnableContentTypes="TRUE" in the <List > tag.
    The following materials would be helpful:
    How to add custom content type to a custom list
    http://innersharepoint.blogspot.de/2009/10/how-to-add-custom-content-type-to.html
    SharePoint Custom List Definition with Content Type
    https://achrafsp.wordpress.com/2013/03/31/sharepoint-list-definition-with-content-type/
    Create a Custom SharePoint List Definition
    http://www.mssharepointtips.com/tip.asp?id=1188
    Best Regards
    Dennis Guo
    TechNet Community Support

  • How can I Publish to a Folder just one of the several websites I have created using iWeb?

    How can I Publish to a Folder just one of the several websites I have created using iWeb?
    it drives me nuts having to emove all the other websites when I want to upload one. 
    Sparrow

    For iWeb, I like to do only one site per domain file.  I move domain files out of the Application Support folder and place them inside project or client folders, or in DropBox. Once you duplicate a domain file and begin customizing it, it will load and behave as a separate project/site.
    I publish each iWeb domain/project direct to a server via FTP. Sometime I publish to a folder, then upload via FTP manually.
    iWeb is a remarkable tool, especially when you work from scratch with blank tamplates
    Here are a few of my iWeb sites:
    http://www.newcovenant.org
    http://www.visionmultimedia.org
    http://www.visioncomsolutions.com

  • Can't open 1 document created using travel journal template

    Since installing Snow Leopard yesterday I found out I can't open this one file I created using the travel journal template. All other Pages '09 files are fine. I just get this error message telling me Pages had to close my document "unexpectedly".
    *"Pages quit unexpectedly while using the SFWordProcessing plug-in"*
    Don't see why it would need to use this plug-in. And I don't recall choosing this plug-in. There must be a way around this. To open this file by turning off that plug-in perhaps. Unless it's absolutely necessary when using the templates. Or the "travel journal" template.

    http://discussions.apple.com/thread.jspa?threadID=2141021&tstart=15

  • How can I remove a signature on a PDF file that I created using Preview on iMac computer??

    How can I remove a signature on a PDF file that I created using Preview on iMac computer??  I inadvertently hit the icon on the Preview tool bar with an xS and a line through it.  There is my signature in the middle of the PDF file I was editing.  How do I get rid of it?  Cannot select it.  Cannot find any tools that allow me to delete it.  The Preview documentation tells how to create and apply a signature, but not how to remove it.  I think when a signature is added the doucment becomes locked from any editing.

    Hey needadobehelp10,
    Using Adobe Acrobat/Reader, you can simply change your PDF view settings under "View > Page Display > Single Page View"
    Is this really you wish for?
    Please let me know.
    Regards,
    Anubha

  • Can a Photo Gallery be created using the Meta Data with a Widget or Lightroom ?

    I want to create a website with a bunch of photo galleries, but I have to have the Titles and Descriptioins from the Meta data used. 
    Can Muse import Lightroom Photo Gallery's web pages?
    Or, Is there a widget to do this?

    So your saying import a Gallery from Lightroom using Muse's slideshow widget, which ignores titles/descriptions? 
    I'm finding it very difficult to understand why Muse would not use this information as it clearly shows the File Names in Asssets.
    The workflow seems simple: Take A picture, Bring it into Lightroom, Adjust and enter WHAT it is with Titles and Descriptions, use it ALL in a website.
    I've got some 500 photos.
    Re-entering Titles/Description information everytime it's used in a website is not something anybody should have to do.
    Please help, there has to be a better way to do this.
    I'm eager to buy Adobe's product to do this if it can be done.
    Adobe is too smart to leave out something so simple with MUSE.

  • Graphics using graphic API are drawn below the loaded content created using Flash authoring tool

    Here is my problem.
    I am developing a Analog Dial component. Here , I am
    extending UIComponent and loading a swf file generated using Flash
    CS3 authoring tool ( the swf basically has the circle and needle)
    and adding the loaded content as child of Dial class.
    Next I use Graphics API to draw the major and minor ticks on
    the dial.
    As mentioned in the curveTo method of flash.display.Graphics
    class documentation (
    http://livedocs.adobe.com/flex/201/langref/index.html),
    if you are using graphics api and also loading content created
    using the flash authoring environment the vector graphics will be
    drawn underneath the loaded content.
    Well , Is there any way to make the graphics appear on top of
    the loaded contents?

    It appears that this may be accomplished more easily if I do something similar to the StrobeMediaPlayback implementation. Looking at the StrobeMediaPlayback source code it looks like Adobe has done something a little different than their ControlBarPlugin, placing the controlbar and root media element inside separate MediaContainers and then adding those containers to the display list. Is this recommended over using the frameworks ParallelElements? If so, is communication between the control bar and root media element still a matter of just updating the target reference via metadata?

  • How can i reuse same variables that i create using c:set var="index" /

    hi all,
    please some one helpme!!!!!!
    how can i reuse same variable that i create using
    <c:set var="index" value="${0}"/>
    cause later in the program i use index to do some condition and based on that i increment ...
    so for example if i say...
    <c:if test="${index==0}">
    <c:set var="index" value="${index+1}"/>
    </c:if>
    will it be like
    if(index==0)
    index++;
    can i do like i did be4. if not what do i need to do to reuse. cause i use the variable atleast 5 time and its keep changing on diff condition level.

    Have you tried it?
    It should work, provided you are on the same page.
    The c:set tag creates the variable in pageScope by default.
    If you forward to another JSP you need to set the scope to be "request" so that it is still available.

  • Can i export documents created in pages so that people using word can read them

    If I create documents in Pages, Numbers, and Keynote, can I save and export them as Word, Excel, and Powerpoint documents so that my pc using friends can open and read them?

    Hi David C-B,
    Welcome to the Support Communities!
    The article below may be able to help you with this:
    Pages '09: Exporting to other file formats
    http://support.apple.com/kb/HT3705
    Word files can be opened and edited in Microsoft Word on a Mac OS X computer or on a Windows computer.
    Cheers,
    - Judy

Maybe you are looking for