If export an image from Lightroom 5 to Photoshop and make changes

after export an image from Lightroom 5 to Photoshop and make changes to this image and then save in Photoshop as a tiff it does not show up in the original folder in Lightroom after exiting Photoshop

Does this help?
Re: Photos from Lightroom 5 to Photoshop CC (2014) and back...

Similar Messages

  • Exporting from Lightroom to Photoshop and back to Lightroom shows different results in Lightroom than in Photoshop

    I has set the color space to ProPhoto RGB in both Lightroom and Photoshop. I have also calibrated my monitor.
    But when I export a photo from Lightroom to Photoshop and edit it there before saving it, the photo in Lightroom is very different than what the Photoshop edit shows.
    Photoshop is to the left, Lightroom to the right.

    Ask in the LR/ PS forums and provide details about your system, your files, your develop settings, other stuff. You need to be much more specific.
    Mylenium

  • How come I can't export a image from lightroom 3 that is 600w x 610h?

    How come I can't export a image from lightroom 3 that is 600w x 610h?

    I think thats what I'm doing.  No luck though. Maybe its a bug?

  • Has anyone had difficulties opening up an image from Lightroom to Photoshop CC?

    Has anyone had difficulties opening up an image from Lightroom to Photoshop CC?

    Hi Tom,
    Kind of you to reply. My 'titles' conform, as they always have done.  I've used a few versions of PSE over the years. Pics edited in an older version opened up no probs on ipad.
    When I upgraded my camera a few years ago I had to upgrade PSE because the updated codec for shooting raw was not available for downloading to earlier versions of the programme.  The same occurred again with another camera upgrade, which is why I am using PSE12 now.
    Cheers
    Z

  • Need to Export All Images from Aperture to Photoshop.  Can anyone help?

    I'm new to Mac. Just got my iMac in January. I wanted to buy the Mac version of Photoshop Elements 8, but the Apple salesperson convinced me that Aperture 2 would be much easier. After three months, I've discovered that Aperture is just not for me. I just purchased and installed Photoshop Elements 8 for Mac today. I would like to move all of my images from Aperture to Photoshop and delete Aperture from my computer. I cannot figure out how to do this. Whenever I try to export, the Aperture "library" appears as a big block that won't open or prompt for subfolders. Please help!

    Pvonk has good advice. I just want to make sure you understand the Aperture has a Master and at least one Version of each image file. The Master is the original -- never touched. The Version is at first a copy of the Master, but as soon as you make any changes it holds those changes. So you have to decide whether you want to export the Masters, the Versions, or both (which you'll have to do separately, afaik). Aperture gives you the choice. Click "Photos" in the Library tab of the Inspector, then select all, then "File>>Export". If you want to maintain your groupings (e.g.: Projects), you will probably have to select the images in each group and export them as a unique set.
    Note that Aperture is a very powerful image database (pros refer to this as "Digital Asset Management") in addition to (w. v. 3) being a very powerful digital photograph development lab. Photoshop Elements does none of the former, and a very different kind of job than the latter.

  • Moving images from Lightroom to Photoshop 2014 CC – Color Problems?

    For some reason, whenever I select "Edit in Photoshop 2014 CC", the image color is not only extremely different from what's displayed in Lightroom, it's dark and dull. However, if I export the image as a .jpg and then import it into Photoshop 2014 CC the color looks the same as what's displayed in Lightroom and this is with NO color correction.
    Why is this happening and how should I be moving files between the two apps? BTW, I shot the images with a Canon T3i that saves the image as a CR2 and JPG.
    Thanks!

    I'm running Lightroom and Photoshop CS3. "Edit image in Photoshop CS3" works fine for me. I'm on an iMac and had Lightroom installed first, only thing I noticed is it takes PS a little longer to open up.

  • I am getting grain when importing images from Lightroom to Photoshop, what is causing this?? It has only just started happening!

    Just recently I went about my usual workflow, doing everything in Lightroom I can and then completely the last touches in photoshop. Now especially if I sharpen in lightroom I am getting this horrible grain all over my photo when I open the exported lightroom image in Photoshop. It has nothing to do with zooming in on the image or anything.
    Also, if I open the Lightroom exported image just as a photo and not in photoshop I do not see any of the grain that is appearing when I open it in Photoshop, what has happened here?

    *completing

  • Problems with editing images from Lightroom to Photoshop CS3

    I just installed Lightroom onto my new MacBook Pro and just installed a new version of Photoshop CS3. When I hit the "Edit image in Photoshop CS3" button in Lightroom it won't open Photoshop and therefore won't let me edit the image in CS3. Does anyone know what might be wrong? Any info would be helpful.

    I'm running Lightroom and Photoshop CS3. "Edit image in Photoshop CS3" works fine for me. I'm on an iMac and had Lightroom installed first, only thing I noticed is it takes PS a little longer to open up.

  • Open Photoshop image from PDF into Photoshop and change cmyk text to 100% black

    when I have a supplied PDF file that has cmyk text, I open the image in Photoshop but I don't know how to change the cmyk text (some very small and some large) to 100% Black. I used to know the short cut key to do this but I can't remember. I used to use the marque tool then use a short cut key that would knock the cmy out of the k. Can some one please tell me how I can achieve this in a flattened photoshop file opened from PDF into Photoshop. Thanks

    One way to do this:
    Use a hue/saturation adjustment layer, click the Colorize box and drag the Lightness slider to -100. The black will go to C:0, M:0 Y:0, K:100. I'm not aware of a shortcut for this, perhaps someone more informed could help there. You would only want to apply it to the text, clipped to a separate text layer ideally, but if your file is already flattened you could apply it via a selection/masking.
    Mike

  • Trying to email an image from Lightroom 5.7 and I get the error validation failed to establish connection with email server

    ffailed to establish connection with the outgoing email server.  Yet my email works fine with sending and receiving anything else.

    Your settings will usually be blocked by Google unless you agree to lower your security settings.
    Enter your details as shown in image 1 below and click the validate button.
    You should see a LR message that the server settings could not be authenticated.
    Launch your web browser and go to your Gmail inbox. Look for a message from Google confirming the authorization attempt was blocked.
    Click on the link (highlighted in red) on image 2 below.
    You will need to Click on the link “Allow less secure apps”
    Choose enable
    Click done
    Now go back to LR and click the validate button and your Gmail account should show as validated.
    You can now select a thumbnail from the LR Library and mail it by pressing the keys Control + Shift + M (Cmd+Shift+M on Mac)
    The alternative is to set up Google two step verification and make the security application specific to Lightroom.

  • Exporting multiple images from lightroom

    I would like some advice and help.
    For the sake of discussion let us say that I have a catalogue of 1000 image. The images are divided into a number of subfolders, say by year. Each subfolder has from 1 to 100 images. I have finished my editing and want to export all these images to another hard drive---BUT- I want them to remain in the same folder hierarchy as exists in the original catalog. That is, the new hard drive should contain the main folder and subfolders and these subfolders should contain the appropriate images by year, or whatever.
    Is there an "easy" to do this or must i export folder by folder to the new hard drive. my aim being to have a complete set of final images.
    Perhaps I should add that these are scanned images of 30 to 100 year old photographs and the "negatives" are jpg and tif.

    May I assume you often post from mail or usenet?
    By mail, yes.
    >Quite a number of times we see a blank "message" from you; at others quoting a lot of the previous post, which is seldom necessary. While it may be a pain to you, could you use the web format?
    >
    It will save some of us time by not looking at messages which contain nothing.
    Sorry about that. I don't like, and probably won't use, the web
    interface. The blank part is due to the stupidity of the web software,
    which automatically cuts off all text after "w r o t e", instead of
    including everything the poster includes in their message. One of the
    reasons why I don't want to use the software is how dumb it is ... I
    try and quote back only the specific lines I am responding to (like
    now), as proper netiquette requires. If I had to use the web format ..
    I probably wouldn't use it at all (yeah, I have that much respect for
    it ), and so wouldn't be offering any help at all (little as it may
    be).
    Here's what I said last time:
    He wants to export the adjusted originals as new files to the new destination. This will only give him a copy of the originals in the new destination, won't it?
    Perhaps I mis-understood; I thought he wanted to move all his files to
    a new HD, and continue to use them there. The method I mentioned
    should keep all the edits (either in the XMP, which is also moved, or
    in the catalog). The catalog is the same; he's just repairing the
    links to the (now moved) files. That should keep the edits with the
    images, shouldn't it?

  • Exporting RAW images from Lightroom 5

    My continuing story of space issues. Find that I'm rapidly running out of space now that my wife has been uploading way too many 24 mpixel files (~30Gb total) to my Lightroom 5 catalog. Is there any way to export her RAW files to a thumb drive or another external hard drive?  The only export functions I see are conversions to Jpegs.

    Well, dmontabana, I think you have outsmarted yourself.
    Export with File Settings as original gives you an unedited photo, with no keywords or other user-created metadata. Furthermore if you have "cleaned up a lot of badly needed disk space", which I assume means you deleted the originals, your Lightroom catalog now thinks the photos are missing, and you will have to do extra work to reconnect the photos in Lightroom.

  • After exporting an image from Lightroom CC to PS CC and back to LR CC

    When doing adjustments on the image, the screen blanks out after each adjustment. I have a fully loaded Macbook Pro (mid-2014). I unchecked the Graphics Processor. Makes no difference. On or Off.  Any suggestions? Very annoying. Thanks

    YES SIR!!!
    The Computer specs:
    Dell XPS (Windows 8)
    Intel Core i7-4500U @ 1.80GHz  2.40GHz
    8 GB RAM
    64 Bit
    Im exporting Mpeg Video and Audio (.mpa) for DVD. The computer it worked on before was the same exact computer. (Business PCs)
    The sofware is Premiere Pro CC and Media Encoder CC (as stated)
    Anything else?

  • Photoshop won't open image from lightroom

    When I try to export an image from Lightroom to Photoshop (CC) Photoshop opens, but the image doesn't.

    Same here. I've never had trouble with this function before.
    It opens the Photoshop application with all the menus/windows, but it never opens the actual image I chose to work on.
    I'm on a Mac, using OS X Yosemite, 10.10.1  Lightroom is version 5.7  Photoshop is CS5, version 12.0.4
    FWIW, I also can't automate>Photomerge ... . Makes me think Photoshop, not Lightroom, is all wacky. I tried dumping PS preferences

  • Lightroom to Photoshop and back question

    When I export a photo from Lightroom into Photoshop, I make my edits, and then I select save.  In Photoshop the photo changes to a psd file as it should.  But when I go back into Lightroom, the photo does not appear in the original folder it was sent from.  It appears in a new folder that I did not create.  When I try to "move" the picture from this new folder back to it's original folder it says that the file already exists in the original folder, but there is NO photoshop edited picture in that original folder - only in the new folder.  I know I must have a setting wrong, but I have searched and searched and I can't figure out what is wrong.   I can't seem to figure out how to get the photos to go from Lightroom into Photoshop back into Lightroom and end up sitting next to the original picture in the folder it came from.!  Any ideas?  I am using Lightroom 5.4 (everything is up to date) and Photoshop CC (latest version).  I have a Macbook Pro computer.

    Sure.  Here are two images.  The first one is of the original picture in it's original folder.  The second one is of the edited picture in the "new" folder that Photoshop/Lightroom created.  I left the photo info on the picture so you can see it.  Any help would be so much appreciated!
    Thanks!

Maybe you are looking for

  • ITunes installer won't recognize QuickTime

    Hello - I've been using various version of iTunes for the last 2 years. With the upgrade to 7.0.2 though, the installer will not recognize my QuickTime install. I've followed the various sets of instructions on the FAQ, most recently just completed r

  • Regarding workflow organizational unit

    Hi, I have FM SWI_GET_USERS_OF_ORG_UNIT passing some oranizational unit number of the production system which was not there in devlopment server. I am testing in development server now to work the workflow I need to chnage the number to developemnt s

  • Parallel Execution questions

    Hi everyone, i have few questions about Parallel Execution. 1- Query Coordinator to scan the table, split up the table to the processes. But, each process take different number of rows. For example, in oracle 10g database architecture, thomas kyte ga

  • Infosource invisible in Productive system (APO BW)

    Hello I've created a new setup where i'm uploading from a flat file to an infocube. It works fine in the T and Q system. However after transport to the P system i can only see the infocube in RSA1, i cannot see the infosource so i can't create an inf

  • JSTL HTML output when looping

    Hi, I am creating tables dynamically using JSTL. My problem is, the HTML that comes out has lots of blank space. This may sound insignificant but it makes it very hard to see what's going on when I view the source of a page. JSP:      <c:forEach item