Media cache files are not involved in the removal of the Adobe watermark from the project.prel file from a tryout.
Just a re-enforcement mention...you cannot remove the Adobe watermark from a tryout "saved" exported product; whereas, you can from a saved/closed project file (project.prel).
By exported product, I mean a burn to disc in the tryout or the Timeline of the tryout exported to a file saved to the computer hard drive.
In the case of removing the Adobe watermark from the tryout project.prel, classically you delete the rendered files (Timeline Menu/Delete Rendered Files) in the purchased program. In no way is media cache involved in this. Some of us have found that there was an automatic removal of the Adobe watermark resulting from just opening the tryout project.prel file in the purchased program.
Please review and consider.
Thank you.

Similar Messages

  • With Premiere elements 11, when Publish/Share (saving) a finished video, selecting H.264  .mov file type, what are the recommended Codec and Aspect settings for a crisp video and a small file size?

    With Premiere Elements 11, when Publish/Share (saving) a finished video, selecting H.264  .mov file type, what are the recommended Aspect and Codec settings , for a crisp video with a small file size?

    Gary Krouse
    We will customize a very detailed reply, but
    (a) What are the properties of your source media?
    (b) What did you or the program set as the project preset to match the properties of the source media?
    (c) What specific requirements do you have for this H.264.mov export file?
    File size can be a compromise between bitrate, file size, and quality.

  • Proxy Editing with Premiere Elements 10

    I just read the great post on how to proxy edit with version 7 at http://forums.adobe.com/thread/390600?tstart=0, but I cannot find a way to save a preset with Premiere Elements 10 so I could then modify it to display previews in low-res and output in full HD. The online help from the program mentions "creating" presets, but then only describes how to slelect existing presets. Can anyone tell me how to make a new project preset, or better yet, if there is a built-in way to proxy edit with 10? Thanks!

    For reasons that I have not figured out, your last message arrived as an email notification of an Adobe post, but it is not posted in your thread yet. In that post you wrote:
    The properties for the clips shows:
    Type: MPEG Movie
    Image Size: 1920x1080
    Frame Rate: 23.976
    The Interpret Footage settings show under Frame Rate the radio button for Use frame rate from file: 23.9750 is selected, and under Pixel Aspect Ratio the radio button for use pixel aspect ration from file is selected.
    I never received a message to change the project preset.
    As a test, I imported a clip that was shot at 1920x1080 30fps and added it to the timeline. I did not receive an error message, but this clip also has a red line above it on the timeline (as do the 24 fps clips).
    Thanks for the help AT and SG.
    Based on the information supplied, I cannot see a reason why your video should be displaying with a red line over its content
    a. Your project preset = NTSC DLSR 1080p DLSR 1080p30 @ 23.97
    b. You are dragging the import (1080p @ 23.7 progressive frames per second) from Media to Timeline as the first video to be placed on that Timeline
    Please review these criteria and let us know if you spot anything that you have as not consistent with a and b.
    Keep in mind, when you bring in a file that is 1080p30 into this project set for 1080p24, you would expect to get a red line over the 1080p30 content since there is a mismatch between file and the project settings.
    Another important matter that I am not clear on...is your problem only in previewing? Or does the problem go to previewing as well as exported product?
    Add On: After I submitted this post, I saw that your post which I found missing previously is now displaying in your thread.

  • With recent calls , is it possible to save certain calls without saving them to contacts and delete the ones i dont want?

    My question is ,
    with the recent calls is the a way to save certain calls without saving them as contacts, and delete the others that i dont need?    I am a truck driver and i  need only certain calls during the day and if i could delete only the ones that arent needed for the day and keep the others that would make the day run smoother.  Each is different and when the day is finished then i would delete the ones i needed for the day and start all over again.   Is this possible?

    I think you would have to reinstall the keys seeing that if you format the computer all the data is gone. Even though you backed up that data you never know what can happen when you try to reinstall certain apps. Not sure what method you can go by, you should run a diagnostics test to see how you computer is doing internally.

  • Multiple Hard Drives for Video Editing with Premiere Elements 8?

    I'm using Premiere Elements 8 for video editing. These are the specs I'm using:
    The camcorder I used to shoot the footage is a Sony Handycam with  model number HDR-SR12. It's a digital HD video camera recorder that  shoots in NTSC 1920x1080i HD  recording. The footage was shot with AVC  HD  9M (HQ), which records in higher image quality mode. The  video  camera is connected to my computer through a USB cable.
    The  computer  itself is a Windows 7 desktop computer. The CPU is an HP  Pavilion Elite  HPE-150f PC with Intel Core i7-860 processor. I imported  the video into  Premiere by selecting "File" --> "Get Media From"  and then choosing the third  option from the top.
    My import  option is NTSC/AVCHD/Full HD 1080i 30 5.1 channel, which matches the  specs of the camera I shot the footage with.
    Even with the patch 8.0.1 that should be preventing crashing, the program keeps crashing upon startup with one specific video project. Using the exact same video files for that project, I recreated the video, with Elements, and never ran into the problem. Both times, I had the patch installed.
    At the moment, I am using only the single internal hard drive for everything (software, OS, video editing, etc.). It is 1 TB in size. However, I am informed that one hard drive is not recommended for video editing, and that I need at least two hard drives, one for OS and one specifically for video editing. I was also informed of FireWire 800 and eSata; however, it does not appear that my computer supports eSata.
    Can this problem be resolved if I have an external hard drive and connect it to my computer with FireWire 800 (which the computer supports)? If not, what can be done so this problem doesn't arise in the future?
    Thanks for the help.

    staring-into-space wrote: My import  option is NTSC/AVCHD/Full HD 1080i 30 5.1 channel, which matches the  specs of the camera I shot the footage with.
    When you import the footage is there a red line across the whole of the timeline?
    staring-into-space wrote:
     I recreated the video, with Elements, and never ran into the problem.
    As you have the recreated project working fine I'd be inclined to put this down as a one-off glitch. If it happens again on a different project then it may be more worrying. You may want to consider using save-as to create multiple versions of your project (note this does NOT duplicate the source clips - so you won't be eating up much extra disk space). You could for example use save-as to create a daily version - ProjectName-Mon, ProjectName-Tue etc....
    Insanity is hereditary, you get it from your children

  • Constant errors with Premiere Elements/Photoshop 7 - will upgrade to 9 help?

    I currently have Premiere Elements 7 and Photoshop 7 on my computer. Both crash a lot, often with no error messages. I also cannot seem to backup my Photoshop files. I want to purchase and install Premiere Elements 9 (and Photoshop) but am worried about losing my existing images/video. I'm also concerned that I will have the same issues once I upgrade to version 9.
    If I cannot backup these files, is it probable that I will lose them? Any advice is appreciated.

    You need to give more information for someone to help
    Some specific information that is needed...
    Brand/Model Computer (or Brand/Model Motherboard if self-built)
    How much system memory you have installed, such as 2Gig or ???
    Operating System version, such as Win7 64bit Pro... or whatevevr
    -including your security settings, such as are YOU the Administrator
    -and have you tried to RIGHT click the program Icon and then select
    -the Run as Administrator option (for Windows, not sure about Mac)
    Your Firewall settings and brand of anti-virus are you running
    Brand/Model graphics card, sush as ATI "xxxx" or nVidia "xxxx"
    -or the brand/model graphics chip if on the motherboard
    -and the exact driver version for the above graphics card/chip
    -and how much video memory you have on your graphics card
    Brand/Model sound card, or sound "chip" name on Motherboard
    -and the exact driver version for the above sound card/chip
    Size(s) and configuration of your hard drive(s)... example below
    -and how much FREE space is available on each drive (in Windows
    -you RIGHT click the drive letter while using Windows Explorer
    -and then select the Properties option to see used/free space)
    While in Properties, be sure you have drive indexing set OFF
    -for the drive, and for all directories, to improve performance
    My 3 hard drives are configured as... (WD = Western Digital)
    1 - 320G WD Win7 64bit Pro and all programs
    2 - 320G WD Win7 swap file and video projects
    3 - 1T WD all video files... read and write
    Some/Much of the above are available by going to the Windows
    Control Panel and then the Hardware option (Win7 option name)
    OR Control Panel--System--Hardware Tab--Device Manager for WinXP
    Plus Video-Specific Information http://forums.adobe.com/thread/459220?tstart=0
    And, finally, the EXACT type and size of file that is causing you problems
    -for pictures, that includes the camera used and the pixel dimensions
    Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037?tstart=0
    What is a CODEC... a Primer http://forums.adobe.com/thread/546811?tstart=0
    What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037?tstart=0
    For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/en
    For Mac http://mediainfo.massanti.com/
    Read Bill Hunt on editing a VOB/MPG file http://forums.adobe.com/thread/464549?tstart=0
    Edit Vob http://premierepro.wikia.com/wiki/FAQ:How_do_I_import_VOB_files_/_edit_a_DVD%3F
    Read Hunt on Using MOD/TOD files http://forums.adobe.com/thread/699990?tstart=0
    Also, For Windows (not sure about Mac) This is aimed at Premiere Pro, but may help
    Work through all of the steps (ideas) listed at http://forums.adobe.com/thread/459220?tstart=0
    If your problem isn't fixed after you follow all of the steps, report back with ALL OF THE DETAILS asked for in the FINALLY section at the troubleshooting link

  • Premiere elements 13, tried to download and reached 5 attempts and it doesnt allow after that - can any syggest how do i get to this

    i have tried to download online premiere elements 13 and due to some internet problem i had to click the down load more than 5 times and now it doesnt allow me. so can any help me in suggesting how to get this done

    use a different browser and/or different wired connection and/or a download manager.  (or dl from prodesigntools.com).
    Downloadable installation files available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
    Lightroom:  5.7.1| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5.5, 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • Can i edit MTS files with premiere elements 13

    I have a new camcorder and I have a problem editing with premiere elements 7, does elements 13  offer a solution? I believe it is the type of file that is not compatible.

    In this thread I have no interests but to supply reliable information to you. What I have written stands as is. And, my answer to your questions will continue to be honest and for your consideration. Any questions or need clarification, please do not hesitate to ask me.
    As for AVCHD.mts and AVCHD.mp4 in camera whose specifications offer the choice of AVCHD or .MP4.....both have been reported to use a form of AVCHD video compression with different wrapper formats (.mts and .mp4). Again, I did not post to go further into that. Please refer to the following link's post dated February 12, 2014 as one discussion of the matter.
    FCP.co Forum :: Topic: AVCHD vs. MP4 ? (1/2)
    I did not discover that AVCHD.mts does not play back the audio portion of an AVCHD.mts file when played back in the Elements Organizer 13 player. That has been the reality of Premiere Elements 13/Elements Organizer 13 users who found this out by themselves later than sooner. And, I confirm their results in those cases. There is no fix for this at the present time, and that is a user to user honest non marketing report. If this Elements Organizer issue is not an important concern for you, then this is a non issue for you.
    Best wishes with your projects.

  • Are there more DVD menu other than what comes with Premiere Elements 13

    are there more DVD menu other than what comes with Premiere Elements 13, anyone Please

    how many systems
    I just answered this question in a duplicate that you posted.
    how many systems can I download my adobe premiere 13 on,
    Duplicated posts tend to be confusing for the person originating the question as well as those trying to reply.
    Typically a moderator closes or deletes one of the duplicates when it is seen.
    So, please continue the discussion on this topic in your other thread whose link is shown above.
    Thank you.

  • I have a PC with Windows 8.  I purchased Photoshop Elements 13 with Premiere Elements 13 Feb 9.  I think I downloaded both today (each took about 15 minutes to download).  Each appeared to have two components.  When I attempted to run the exc piece, I rec

    I have a PC with Windows 8.  I purchased Photoshop Elements 13 with Premiere Elements 13 Feb 9.  I think I downloaded both today (each took about 15 minutes to download).  Each appeared to have two components.  When I attempted to run the exc piece, I received an error message.  I don't know what to do next?

    if the error message was about a missing archive, you need to place both the exe and 7z files in the same directory for photoshop elements.  and then do the same for premiere elements.
    then click the exe in each directory.

  • Editing Premiere cs4 project with premiere elements 9?

    Can I open a premiere cs4 project with premiere elements 9 to edit it.
    Thanks in advance

    You are most welcome, though it's probably not the answer that you wanted.
    There are just so very many differences between the two programs. As a test recently, I took a PREL from PrE 8, IIRC, and it would not even open in my PrPro 2.0, like my simple PrE 4 Projects would. That PrE 8 test Project was also simple, with no Themes, or Instant Movies - just Cuts and some common Transitions, no Effects. Just too different to Open.
    Good luck,

  • New to Forum, Example video Edited in Premiere Elements

    I'm new to this forum, hopefully i can give as much as i recieve.
    I took some video and made a short YouTube clip of a local band playing a very cool original song. Shot with a Canon 7D and a variety of 2.8 or faster lenses, edited in Premiere Elements. The audio track came from a CD, all footage was shot live.
    1. Editing HD footage was painfully slow, so not a good alignment between audio and video in some areas. Is "real-time" editing possible or am I asking too much?
    2. 6 hours of editing and not one crash.

    Thanks for the feedback!
    I've got a dual core AMD 4 GB ram, Win7 64 bit. My graphics card is low end, but have tried and FX580--not much better. I'll be trying other graphics cards, and once again the FX580. I'm happy to supply better machine stats, and project settings,
    The sample video here was made from 10 or so separate 1920 x 1080 30 fps MOV files less that 1 GB each. The MOV came right out of my Canon 7D. Note I never see a red line above clips unless I've applied some effects.
    Things that run very slowly
    1. panning the time line (drag the slider at the bottom of the timeline), can take several seconds for the timeline to move--very slow. I typically have the attributes for each track minimized (to not display anything) in an attempt to boost display speed.
    2. when editing a movie and just hitting the "play" button on the preview window--nasty slow. the first few frames sync with the audio but after say 5 sec of playing. the video tends to stop but or get very jerky.
    3. double click a movie clip (which launches a separate window), play the movie in that window, again very slow choppy graphics.
    I've got to believe it's user error. Adobe Premiere (previous versions) have always been fine--performance is so bad, other's would be screaming.
    Again, thanks for chiming in.

  • Problems with Premiere Elements 8 after updating to Nvidia driver 195.81 or later?

    Hello PRE8 users,
    If you have an Nvidia-based graphics chipset, and you've updated to Nvidia driver version 195.81 or later and you're still experiencing frequent crashes and freezes in Premiere Elements 8, then we'd like to hear from you in this thread. As mentioned in the announcement at the top of this forum, we believe most of these issues are caused by a problem with an Nvidia driver that was released after PRE8 was developed, and that the issues should be resolved by updating to Nvidia driver version 195.81 or later. Notes from the announcement I mentioned above are copied below for your reference.
    Best regards,
    For Nvidia users, there is a driver update that will fix both of the following issues:
    Premiere Elements 8 does not restart after closing on Windows
    Frequent and inexplicable crashes with Premiere Elements 8
    To resolve these issues, you should update your GPU (graphics card) driver to version 195.81 or higher, by following the steps below.
    1.      Identify which GPU driver you have by right clicking on the Desktop > Properties > Settings and in the Display field it will be displayed.
    2.      Go to http://www.nvidia.com/Download/index.aspx?lang=en-us and download driver for your GPU card. Its size varies from 80 to 120MB depending upon the GPU card model.
    3.      After the download is complete, run the driver install Installation. This should take less than 2 minutes.
    There are no known issues that the latest driver update will cause.
    This is an announcement. There is a separate discussion topic located here.
    ***If the update steps shown above do not upgrade your system to version 195.81 or higher, then you may need to download the driver directly. Use the link below only if the steps above do not update your driver to 195.81 or higher. The download page for Vista and Windows 7 is located here:

    AMD Athlon(tm) II X4 620 Processor
      Determined by lowest subscore
    Memory (RAM)
    4.00 GB
    NVIDIA GeForce 9500 GT
    Gaming graphics
    2431 MB Total available graphics memory
    Primary hard disk
    231GB Free (466GB Total)
    Up here I copied and posted my PC's spec's.  Since upgrading to the new driver, my problems increased.  I seem to experience more crashes than before.  Happens randomly and I can not see a pattern.   (I have noticed dragging clips from one area to another on the time line is no-no)

  • How do I configure the custom external editor to work with Premiere Elements 13

    I own Lightroom 5.6 and I'm experienced. I've just bought Premiere Elements 13 and I'm a video-editing virgin (be gentle with me). I've spent a day experimenting, reading, watching videos, I've tried asking my question in Premiere Elements forum, and I'm still stuck (i.e. I've tried reasonably hard to solve my own problem).
    I've tried to set up the custom external editor in Lightroom 5 to send photos to Premiere Elements, so that I can incorporate images into movies. Having set it up, when I use it by selecting Photo/Edit In/Premiere Elements 13/, there is an exciting lull as a copy of the image is created and appears in LR, then Premiere Elements launches, then what??? There is no clue as to what has happened to the image regarding its import into Premiere Elements 13. It doesn't appear on the screen, it doesn't appear in the Organizer, it's no-where to be seen, other than in LR!
    Resolution sought
    Can anyone tell me:
    1. Is it possible to use Premiere Elements as an external editor in LR5 ?
    2. What are the precise settings for each field (I've played with the various field options but obviously haven't yet found the right combination)?
    3. If I configure it correctly, what does good look like: what should I expect to see happen in Premiere Elements when I squirt photos over from LR5 via the 'Edit In' option in LR5?
    I don't know if this is relevant: MacBook Pro 16GB 2.8Ghz i7, 750GB SSD (i.e. plenty of space, plenty of horsepower), OS X 10.9.5
    I'm hoping the answer isn't 'sorry, it can't be done' because if it is possible, it would be a real contribution to my video editing workflow.

    You don't have to buy an Apple keyboard, but you probably need at least to buy a keyboard that connects via proper USB instead of through some Windoze-world adapter, which probably requires a driver that's not available for the Mac OS.
    The Apple Bluetooth KB and Magic Trackpad make a fabulous combination for use with any MacBook Pro that spends a lot of time in clamshell mode, because the trackpad works exactly like the built-in trackpad. So there's no transition adjustment to make when you pack up your MBP and go portable with it.

  • Problem with premiere elements 4.0

    i am having
    with premiere elements 4.0. it keeps on crashing and when i put pictures on the timeline it comes up black. when i try to preview it either it shows black or sometimes the picture but i cant see it to delete if i wanted to. also it gave me a message something like that adbe is running low on memory and i should be caution

    This is aimed at Premiere Pro, but may help
    Work through all of the steps (ideas) listed at http://ppro.wikia.com/wiki/Troubleshooting
    If your problem isn't fixed after you follow all of the steps, report back with ALL OF THE DETAILS asked for in the FINALLY section, the questions at the end of the troubleshooting link... most especially the codec used... see Question 1

Maybe you are looking for

  • HT5485 How do i update my iTunes on my computer so I can update my IPod?

    I need to update my ipod but I first have to update itunes on my computer but I dont know how to.

  • BAPI Create sale odrer - order quantity

    Hi ,   Which structure or fields should i use for the sale order quantity in BAPI_SALESORDER_CREATEFROMDAT2?? i tired the schedule line order quantity and item line target quantity.  It still not success. Regards, Kit

  • Get bounds of document using applescript

    I am after getting the bounds of the document in Pages.  I am aware one can use the window object to get the bounds of the window but I am after the bounds of the document  itself.  This can obviously vary when the 'Notes' pane is open etc so I can't

  • Question about Inner/Outer classes

    Hello! I'm still preparing for java cert exam and have a question. If I have Outer and Inner classes like this: Outer o = new Outer(); Outer.Inner i = o.new Inner();Does this mean that 'i' has a reference to both Outer and Inner classes. Moreover, do

  • Reference Schema loader for Transaction Input Property

    Hello, I am trying to use XML Schema to define input structure of a BLS transaction, I have two issues with it. Firstly. I do not get drill down Tree structure of the XML input parameter in an action block's link editor, Secondly, If I add a referenc