If I upgrade to Mountain Lion on my iMac will I be able to open my Photoshop CS4 in order to resize

If I upgrade to Mountain Lion on my iMac will I be able to opwn my Photoshop CS4 in order to resize and adjust RGB of photos of my artwork? I use the Photoshop for very little else at this point in time.
Thank you

Hi Veraforvictory,
There are no known issues affecting compatability with OS X 10.8 (Mountain Lion) and Photoshop CS4. As always, make sure you back up your hard drive before you update your operating system, but there should be no problem using Photoshop CS4 when you upgrade!
Source: http://blogs.adobe.com/photoshopdotcom/2012/08/osx-10-8-mountain-lion-released.html
Cheers,
Michael

Similar Messages

  • Hard Drive warning when upgrading to Mountain Lion. 2 try and I was able to upgrade. Software update for IPhoto, had problems restarting. Do I need my hard drive checked

    Hard Drive warning when upgrading to Mountain Lion. 2nd try and I was able to upgrade. Software update for IPhoto, had problems restarting. Do I need my hard drive checked

    Yes.
    Choose Apple menu > Restart. Hold down the Command (⌘) and R keys as your computer restarts.
    When you see a white screen with an Apple logo in the middle, you can release the keys.
    Click Disk Utility, and then click Continue.
    In the list at the left, select the item you want to repair. (Be sure to select an item that’s indented to the right in the list, not an item at the far left.)
    Click First Aid.
    If Disk Utility tells you the disk is about to fail, back it up and replace it. You can’t repair it.
    Click Repair Disk.
    If Disk Utility reports that the disk appears to be OK or has been repaired, you’re done.
    Otherwise, you may need to do one of the following steps.
    If Disk Utility can’t repair your disk or it reports “The underlying task reported failure,” try to repair the disk or partition again. If that doesn’t work, back up as much of your data as possible, reformat the disk, reinstall Mac OS X, and then restore your backed-up data.
    If you continue to have problems with your disk, it may be physically damaged and need to be replaced

  • HT5361 After upgrading to Mountain Lion in July I am no longer able to receive in Mail.

    After upgrading to Mountain Lion in July I am no longer able to receive my email in Mail. I am able to send, but not receive. How do I fix this? I have been having to do my email on the web and want to receive my email by Mail.

    OS X Mail: Troubleshooting sending and receiving email messages

  • When I upgraded to Mountain Lion on my iMac, it will no longer allow me to use selected folders from iPhoto to run as my screen saver.  Is there anything I can do to fix that?

    When I upgraded to Mountain Lion on my iMac, it will no longer allow me to use selected folders from iPhoto to run as my screen saver.  Is there anything I can do to fix that? Thanks for your help.

    Does this involve iPhoto i some way? Seems more like an issue with your web browser.

  • My screen suddenly zooms too big w/o me touching anything.  Please help. I recently "upgraded" to Mountain Lion on my iMac

    My screen suddenly zooms too big without me touching anything (i.e. mouse or keyboard).  I can't reduce it.  Part of the menu reappears when I click at the very top, but I can't even get the red-yellow-green buttons to show.  I recently "upgraded" to mountain lion.  Did not have this problem in the past.  My settings appear to be correct.  Any suggestions?

    Hi, have you tried setting a different rez in thje Disply Pref Pane of System Prefs?
    Do those things show if you Safe Boot from the HD, (holding Shift key down at bootup)?

  • HT1338 Update for Lion denied; Upgrade for Mountain Lion blocked for iMac Intel

    For several months I've been denied an update for OS X 10.7 and other software updates with a statement: "You no longer have permission". How would I lose permission? I haven't found any remedies yet. So I thought I would upgrade to Mountain Lion. I paid the $19.95 through the App store and find that the upgrade is blocked. Has anyone experienced this and found a solution?

    Yup, I'm experiencing the exact same thing. 
    I (and many others) are experiencing the same or similar issues with the 10.8.3 update.
    I've sent an response to Apple but have not yet received anything back (yet). 

  • Upgraded to Mountain Lion and CS3, I am no longer able to access the correct dialog box for fine printing with Epson Stylus Photo 1400.

    I have recently upgraded my Mac OS to Mountain Lion, and am using Photoshop CS3 together with Lightroom 5. To my absolute horror, in either Adobe program I am no longer able to access the dialog box which allows me to choose paper type, size, and print quality when attempting to print on my Epson Stylus Photo 1400. An excruciating hour on the phone with largely unintelligible folks at Epson seemed to prove the problem lies with Adobe instead of Epson. I'd greatly appreciate whatever advice might be forthcoming from the Community.

    Well, this seemed to work.. can't believe it! After a year of messing with this!
    from Stevejones5
    "I found a way around this problem. GO to HD/Library/Printers/Epson/InkjetPrinter/ICCProfiles and you will find a file labeled Pro38.profiles. This is a package file. Control click on it and reveal contents. Then you can copy all the profiles and paste them into your Colorsync folder either in the HD/Library folder or your own Home folder/Library. Then the profiles will show up in Photoshop and Lightroom."
    Key, is to Control click on the printer to "Open contents". Then open Resource folder. Copy everything in it and then paste it into the "Colorsync" folder in your Library.  (Remember, to get to Library you have to hold the command key down for it to appear in "Go" Menu for Finder.
    Then I reinstalled printer driver from Apple, then rebooted computer, then plugged in printer. And VOILA-- I can now select Epson Premium Photo Paper Luster!

  • I loaded mountain  lion update onmy iMac and now safari won't open

    I did a software update and loaded mountain lion on my mac. I foundw that safari will not load. I have now rebooted the system a number of times with no effect . So I have no safari.... Help

    Does it just say that "safari quit unexpectedly"?

  • If I upgrade to Mountian Lion on my iMac, will my Macbook Air get the update free of charge?

    I have an iMac and a Macbook Air. Both are running Snow Leopard 1.6.8. If I upgrade my iMac, will my Macbook Air get the update free of charge from the Mac App Store? Is it similar to buying an app on one iDevice and getting it free of charge on another iDevice with the same iTunes account?

    Yes, indeed it is the same.  But you must use the EXACT SAME Apple ID account on both machines for the Upgrade.
    Hope this helps

  • I upgraded to mountain lion on my iMac G5 quad core.  It did not reinstall the new version of iPhoto

    I still ahve the old Iphoto.  How can I get the new one.  I want icloud to work with Iphoto

    It's a separate purchase, either from the Mac App Store or on DVD.
    (68759)

  • After upgrading to Mountain Lion the mail app will not quit and then freezes only a force quit will work. How do i quit it normaly?

    Mail will not quit normaly only force quit works. Any help?

    Under the Mailbox drop down it is the last option.  Just select a mailbox first before going to the Mailbox menu.

  • After upgrading to Mountain Lion it's not possible to play videos in Fullscreen Mode

    Hello everyone,
    after upgrading to Mountain Lion on my iMac (27 inch, Mid 2011) I got the problem, that every video or movie in full-screen mode jiggles after a while. I'm using my Mac as a TV with Elgato EyeTV - and usualy I use it in full-screen mode.
    A complete new installation from scratch didn't solve my problem.
    If the problem occurs, the processor idles ans the hard-disk activity is low.
    Is there anybody out there, who can help me?
    Regards,
    Stephan

    If the issue only occurs when watching TV (using Elgato) then it's an issue on their side. Try a browser window and if can view the browser in full screen mode then that proves the point. You can also create another user account, log into that account and see if the issue is still there. If it disappears then you have an issue in your normal user account that needs to be tracked down. If the issue persists then your issue is global.

  • HT4507 I recently upgraded to Mountain Lion and my Epson R2880 won't print.  Epson Co. has been no help...Is there a driver for it? nothing shows up in Apple's Software Update. Thanks, Jeff

    My Epson R2880 will not print after upgrading to mountain lion. Epson Co. will not help and I can't find an Apple software update.  Any thoughts?  Thanks, Jeff

    Googling suggests this.

  • I have an older mac w/LION 10.7.5 - if I upgrade to Mountain Lion 10.8, will it slow down my computer significantly?

    I have an older IMAC - purchased in 2007. Works well. I have LION iOS 10.7.5 and want to upgrade to Mountain Lion 10.8. Will it slow down my computer? If so, how much?

    Be sure you can upgrade your iMac:
    Upgrading to Yosemite
    You can upgrade to Yosemite from Lion or directly from Snow Leopard. Yosemite can be downloaded from the Mac App Store for FREE.
    Upgrading to Yosemite
    To upgrade to Yosemite you must have Snow Leopard 10.6.8 or Lion installed. Download Yosemite from the App Store. Sign in using your Apple ID. Yosemite is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
        OS X Mavericks/Yosemite - System Requirements
          Macs that can be upgraded to OS X Yosemite
             1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
             3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
             4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
             5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
             6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
             7. Xserve (Early 2009) - Model Identifier 3,1 or later
    To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
         Are my applications compatible?
             See App Compatibility Table - RoaringApps.
    Upgrading to Mountain Lion
    To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase a redemption code at the Online Apple Store: OS X Mountain Lion. Mountain Lion is $19.99 plus tax. Use the code to redeem a download of Mountain Lion from the App Store. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
         OS X Mountain Lion - System Requirements
           Macs that can be upgraded to OS X Mountain Lion
             1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later.
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model
                 Identifier 5,1 or later.
             3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later.
             4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later.
             5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later.
             6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later.
             7. Xserve (Early 2009) - Model Identifier 3,1 or later.
    To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
         Are my applications compatible?
             See App Compatibility Table - RoaringApps.

  • What happens when I upgrade to mountain lion from snow leopard?

    I currently have 2 partitions. my mac side and my windows 7 home side.
    If i upgrade to mountain lion from snow leopard will i be expected to reinstall bootcamp and windows7 home along with all my other windows programs?
    What happens to the partitions? do they stay the same or does the upgrade pretty much do a factory restore and make me start from square one again?
    I have a time capsule. but do not really know how to work it like its supposed to. i just really use it to store data that i do not need on my partitions at the current times.

    I do not have any knowledge about boorcamp but on my old MacBook with snowleapard,
    I was not able to upgrade to Mountain Lion Because of my hardware I think.
    And about tha bootcamp partition:
    there shouldn't be any problem with upgrading "if even possible" because the Mac partition
    can't edit the Windows partition.
    I hope this helps you, but I would do some more research befor upgrading instead of completely trusting on my advise.

Maybe you are looking for

  • PL/SQL errors upgrading from 8i to 10g

    I have a number of packages and functions that were created before my time on oracle 8i that work great there, however I am trying to upgrade the database to Oracle 10G and most all of the packages and functions are now invalid. Here is an example Li

  • Function Module FI_CURRENCIES_CONVERT

    We are using function module FI_CURRENCIES_CONVERT in our report. When the conversion rate for a Currency is not maintained it throws an error and program aborts. Is there any way to bring the user back to the selection screen of the report.

  • Udev bash script for autodialing usb huawei modem

    Hey I've got an interesting one here. I have scripted up a bash script to be triggered by a udev add event for my usb modem. As far as I can tell the udev event is firing correctly according to udevadm. ACTION=="add", ATTRS{idVendor}=="12d1", ATTRS{i

  • Get an error after updating the core properties

    Hello, I have just started using Open XML and I am trying to do something really simple to get and set the core properties of a document. I am using the following code public static void getProps(String fileName) WordprocessingDocument document = nul

  • Having trouble transferring hosting to BC

    Hi, Last week I transfered hosting of one of my websites to BC. I cancelled hosting with old host, and added the BC DNS to the Domain Registrar (still JustHost.com) of ns1.worldsecuresystems.com, ns2.worldsecuresystems.com and ns3.worldsecuresystems.