If one period is selected,Report is working fine, not for range of periods

Dear All,
i have a problem in nearly 3 reports of Finance
1) <b>Working Capital Requirement Report,</b>
if one period is selected, Report is working fine, but when range of periods is
given in selection screen, amount is showing wrong value.
2)<b>Balance_Sheet and 3) P&L_Statement report</b>Same problem
E.g Mar07 period will give the results for March08 period and Mar06 period will give the results for Mar07.
Ur valuable suggestion is rewarded.
Regards
venu

Hi,
check for your variable restrictions in the report key figures.
It will show up according to the rsctriction put there.
Try to verify the vlaues with the key figures and if they are amtching then you have some issues with the data loads.
But with your explanation it seems its just the you are looking at the wrong key figure( for actuals you are looking at previous year values)
Or you are using wrong restrcition values at the key figure level( indicators indicating prior values used for actual values).
Hope it helps
Thanks
Ajeet

Similar Messages

Hello there - I am sharing an iPhoto library across two accounts on the same computer - it works fine EXCEPT for Quicktime movies - they play on one account and claim I don't have the rights on the other - all permissions are on and ok?

Hello there - I am sharing an iPhoto library across two accounts on the same computer - it works fine EXCEPT for Quicktime movies - they play on one account and claim I don't have the rights on the other - all permissions are on and ok?

It should be in the Users/ Shared folder.
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Note the option to check and repair Library Permissions
Regards
TD

I have a new hard drive as my old one crashed. Everything seemed to transfer fine except for my entire iTunes library. It shows all of my old songs, but when I click on one it states "the song could not be used as the original file could not be found

I have a new hard drive as my old one crashed. Everything seemed to transfer fine except for my entire iTunes library. It shows all of my old songs, but when I click on one it states "the song could not be used as the original file could not be found.would you like to locate it".
Either how do I locate it, and I've tried every trick I know, or how do I restore all of my songs from one of two sources. I have my old hard drive backedup on an external drive which should have all of my songs, and I have most of my songs on my old iPhone 3S which I'm using as a backup iPod.

The "missing file" error happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, one of its parent folders, or the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout, or vice-versa, and so is looking in slightly the wrong place. In the case of a library moved from one system to another there are also potential permissions issues. See Repair security permissions for iTunes for Windows.
Select a track with an exclamation mark, use Ctrl-I to Get Info, then click No when asked to try to locate the track. (Due to a bug in iTunes 12 you currently have to say No twice!) Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, a folder renamed, or a drive letter has changed, it should be possible to reverse the actions. If the difference between the two paths is an additional Music folder in one path then this is a layout issue. I can explain further if that is the case.
In some cases iTunes may be able to repair itself if you go through the same steps with Get Info but this time click Locate and browse to the lost track. It may then offer to attempt to automatically fix other broken links.
If another application like Windows Media Player has moved/renamed the files then the chances are that subtle differences in naming strategies will make it hard to restore the media to the precise path that iTunes is expecting. In such cases, as long as the missing files can be found somewhere, you should be able to use my FindTracks script to reconnect them to iTunes. See this post for an explanation of how it works.
See also Recover your iTunes library from your iPod or iOS device.
tt2

HT4993 i have I 4S 64 - worked fine not when i take a picture it flashes to camera roll then removes its self - cant find it any where -

i have I 4S 64 - worked fine not when i take a picture it flashes to camera roll then removes its self - cant find it any where -

Have you tried restarting or resetting your iPhone?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPhone shuts down, then press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off"

Help iPhone 4 "Power Button doesn't work", how can I get repair it and how much will cost, want to keep same phone everything works fine not power button. :(

My iPhone 4 power button doesn't work, how can I get repair it and how much will cost, want to keep same phone everything works fine not power button not working unable used my phone. My warranty is Expired how much will cost to put it on my phone plan? Thanks!

Hi Julio,
Here's a link for your question:
http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipho ne
Cheers,
GB

Windows 8.1 - Have loaded PSE12 and Organizer works fine - not able to open Editor!

Windows 8.1 - Have loaded PSE12 and Organizer works fine - not able to open Editor! - I get the moving band - but nothing! Any suggestions - it has worked until the computer crashed and I have reloaded it (several times) and yet Editor won't open - how frustrating!.

I think you need to contact Adobe directly using the link below. Use the dropdown menu for boxes (1) & (2) to scroll down the list and choose:
1. Adobe Photoshop Elements
2. Adobe ID, and signing-in
3. Click on the blue button: Still need help? Contact us – then click the area marked chat 24/7, then click “start chat ”
It’s usually possible to start a live chat, if an Adobe agent is free, and often to get the problem fixed right away. Ask to be transferred to technical support. Have your serial number available. The agent can directly troubleshoot your system if you agree to activate the Adobe Connect add-on.
Click here to get help now Contact Customer Care

Hi, I have an iphone 5 and unfortunately got sat on and is now bent, it worked fine bent for 3 months as the glass did not break, today how ever the screen has stopped working. Is it possible to get hold of another casing and have the electronics changed

Hi, I have an iphone 5 and unfortunately got sat on and is now bent, it worked fine bent for 3 months as the glass did not break, today how ever the screen has stopped working. Is it possible to get hold of another casing and have the electronics changed ?

You didn't look hard enough:
Out-of-Warranty Service
If you own an iPhone that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will service your iPhone for the Out-of-Warranty Service fee listed below.
iPhone model
Out-of-Warranty Service
iPhone 5s, iPhone 5c,
iPhone 5
$269
iPhone 4S
$199
iPhone 4, iPhone 3GS,
iPhone 3G, Original iPhone
$149

BPC 7.0MS Logic - Using NEXT(12) - Works fine except for december

Hi all,
I have a logic where I use TIME=NEXT(12) in order to save current year data to next year data. It works fine except for December.
Here is the script:
*REC(EXPRESSION=%VALUE%,TIME=NEXT(12),DATASRC=INPUT,CATEGORY=BUDGET)
Here is the generated records:
LC,80300_PROV,BUDGET,INPUT,06100141,830060811,GA070,2010.JAN,-42
LC,80300_PROV,BUDGET,INPUT,06100141,830060811,GA070,2010.FEB,-42
LC,80300_PROV,BUDGET,INPUT,06100141,830060811,GA070,2010.MAR,-42
LC,80300_PROV,BUDGET,INPUT,06100141,830060811,GA070,2010.APR,-42
LC,80300_PROV,BUDGET,INPUT,06100141,830060811,GA070,2010.MAY,-42
LC,80300_PROV,BUDGET,INPUT,06100141,830060811,GA070,2010.JUN,-42
LC,80300_PROV,BUDGET,INPUT,06100141,830060811,GA070,2010.JUL,-42
LC,80300_PROV,BUDGET,INPUT,06100141,830060811,GA070,2010.AUG,-42
LC,80300_PROV,BUDGET,INPUT,06100141,830060811,GA070,2010.SEP,-42
LC,80300_PROV,BUDGET,INPUT,06100141,830060811,GA070,2010.OCT,-42
LC,80300_PROV,BUDGET,INPUT,06100141,830060811,GA070,2010.NOV,-42
LC,80300_PROV,BUDGET,INPUT,06100141,830060811,GA070,,-42
No time member is defined in the last row.
any idea? Which parameters define the next members, ie how it determines that NEXT(1) of 2009.MAR is 2009.APR?
thanks for your help,
Romuald

Hi,
I don't have NEXT property. I just have a PRIOR property which is correclty defined except for january. I think that is the problem. I'm going to add PRIOR property value on january members.
thanks for your answer,
Romuald

Cs6: All the apps seem to be working fine, except for Illustrator and Photoshop

I just purchased and installed CS6. All the apps seem to be working fine, except for Illustrator and Photoshop. Why would that happen? I'm a freelancer and I have jobs to finish... can anyone help with this?

what's the problem with ps and ai?

HT4528 I dropped my phone in water, everything works fine except for the home button, it will not work. Any suggestions on how to fix this? I really don't have the money to buy a new phone right now...

I dropped my phone into water for a split second and everything works fine except for the home button... I really don't have the money for a new iphone right now.. Please tell me some tricks to get it working again... Thank you

put the phone in an open bowl of rice on a heated surfade such as a raduator
for 48hours

How do I get incoming mail in one of my mailboxes unstuck. It will not download any mail in one box but the other mailbox works fine

How do I get incoming mail in one of my mailboxes unstuck?? It is trying to download it but seems jammed. The other mailbox is working fine. I know there is mail there because it is coming into my bb. This just started this morning. I took someone's suggestion and duplicated my mail from the library and I then put com.apple.mail.plist on my desktop. I was unable to delete the incoming mail from the mailbox however so don't know what to do.
Help?

Try this: If this is Apple Mail, select the Mailbox, then from the Mail Menu>Mailbox>Rebuild.

Ad page for one site won't display, but works fine with Internet Explorer

Main page of one site displays fine, but ad page won't. Works fine under Internet explorer. Didn't have problem before.

When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
(1) Bypass Firefox's Cache
Use Ctrl+Shift+r to reload the page fresh from the server.
(You also can clear Firefox's cache completely using:
orange Firefox button ''or'' Tools menu > Options > Advanced
On the Network mini-tab > Cached Web Content : "Clear Now")
(2) Remove your live.com cookies (save any pending work first) using either of these. While viewing a page on the site:
* right-click and choose View Page Info > Security > "View Cookies"
* Alt+t (open the classic Tools menu) > Page Info > Security > "View Cookies"
Then try reloading the page. Does that help?

HT1351 Have downloaded one playlist in my ipod classic,works fine, now downloaded another, can't figure out how to access it??into playlist from there goes to On-the-Go. How do I access Playlist 2????

Just got this Ipod classic, little greek to me, Have downloaded one playlist, works fine, now tried to download a second , which I believe it did, out of my Itunes library, but how is it listed in my Ipod , scoll down to playlist, then what? seems to always go to On-the-Go then what ??? Thanks Dan

When you go into the Playlists menu of your iPod Classic, you should see a list of the Playlists you have downloaded from your iTunes Library - and the On-The-Go Playlist. If you can only see the On-The-Go Playlist, that suggests that you have not successfully downloaded any Playlists.
Playlists are separate from the songs. The songs, albums etc. etc. will be listed under those menu headings on the Main Menu.
The On-The-Go Playlist is a feature that allows you to create Playlists on the iPod. Initially, and after each Sync with iTunes, the On-The-Go should be empty. If you create one, you can save it on the iPod and it will be transferred back to the iPod at Sync time and renamed as On-The-Go X (X is the next available number). If you create and save one on your iPod, it will be named on the iPod as New Playlist X, but renamed as On-The-Go X when Synced with iTunes.

I bought an Apple TV two days ago for a lg tv. We had a blue ray player on one HDTV connection. It was working fine. Unhooked that plugged in the apple and ... Nothing. No Signal. The on light illuminates all cords tight. Do I take it back to store?

I bought an Apple TV two days ago. Followed instructions to hook up and light is on on box. Unplugged working HDTV connection on tv -it has two more unused - and made final Apple TV HDTV connect to tv tight. Flip over from cable and... no signal! Everything else fine blue ray back to same port and works fine. Do I take this back to store for replacement? Might be new cord or Apple TV,
. Tried other ports on tv with no success. Thanks for any suggestions. Oh yes, mountain lion on air up to date on iPad and iPad min...

I would test it with the tv of friends and or relatives to verify it was broken
(I would do that with all such devices before taking them back)

Suddenly, I am unable to add photos to my project in Imovie 11. I have an IMac Snow Leopard 10.6.8 and have made several movies where this worked fine but for some reason, it has quit. Everything seems to be working fine except that?

I'm an oldtimer and have had this Mac for less than 2 yrs and have LOTS to learn - but I've climbed the curve a little. !'ve made several movies and published to YouTube and burned to disc using IDVD with reasonably good results. Each time I have added stills to my movies it has worked fine - but tonight, I'm suddenly unable to add them. I click "Photos" - select my photo - left click the photo and drag into the project while holding the click. Have the green "+" and the green highlight and even get the green vertical bar in the project but when I release the click, the photo simply disappears! One "clue" here may be this: I was able to add one still to this project and the only diff between it and the other still thumbnails now is that there is a "green check mark" on the thumbnail of the one successfully added. Any suggestions? (I do have the "advanced tools" option selected in IMovie Preferences.)
Thank you so much for any help at all.
Sam

Hi
My first thoughts are
• iMovie ill behaving - Trash the iMovie pref file - use to set things right
• in reg. to Photos - Did You change iPhoto Photo Library - Then iMovie get's lost as it peeks into iPhoto on start up to see where photos are stored. Set iPhoto back to first Photo Library (when iMovie is not running) then start iMovie.
Yours Bengt W

If one period is selected,Report is working fine, not for range of periods

Similar Messages

Maybe you are looking for