If someone changes the date on an iCal event should the date change for the invitees if they accept the change?

My wife's calendar schedule is pretty hectic and prone to date changes. If I accept the initial invitation it appears correctly in my calendar and syncs correctly to all my devices but I find that if she changes a date and I accept the new change, the event stays the same in my calendar. 
Is this correct or am I having problems?
Cheers

Thanks - I did get the event to go back to 2008, but should the individual clips move to the correct spot in the timeline also?  I need to go back and play with it a little more - I would guess you might have to look at the length of clips on either side of where you want the new clip placed for it to work correctly. 
So, I guess my 2nd question is if you can get the new clips that were added at the end of the event to move into the correct position within the event.

Similar Messages

  • How to decide if an iCal event will send out an email to invitees?

    Looks like iCal Reply Checker doesn't work anymore in the latest iCloud update of Lion (10.7.2)?
    Is there any way to add someone as an invitee, but not actually send them a calendar invite?

    ejp wrote:
    This is very odd. The XMLEncoder already does a trial decode to make sure it has serialized the object.
    Doesn't a line like this one
    <object class="java.awt.geom.Point2D$Float"/>
    indicate that an object (as part of an object graph) was encoded without any additional information?Exactly. But the XMLEncoder assumes wevertying is a Java bean, with getters and setters. Any object without set methods isn't going to be serialized correctly. You need to add your own PersistenceDelegate for any such classes you find.Thanks, ejp - knowing that an object cannot be reconstructed by encoding/decoding it would be sufficient. Currently my strategy is:
    a) Encode the object to memory, using XMLEncoder.
    b) If no exceptions were thrown, parse the resulting XML for lines of the form "<object ... />". If any such line is found, the object is no candidate for XML-serialization.
    c) If the object (or a super-class) overrides Object.equals, the XML is decoded and the resulting object is compared to the original one.

  • Ical events on iphone but not on macbook ical...

    My ical events on my macbook are not showing up, but they show up in ical on my iphone. I've tried syncing and this is not adding my events back to ical on my iphone. Please help!

    I read your original message again.
    athomas2690 wrote:
    My ical events on my macbook are not showing up, but they show up in ical on my iphone.
    They show up on the iPhone but not on the Mac? In what calendar do these events show on your iPhone, a iCloud/CalDAV calendar or an "On My iPhone" calendar?
    I've tried syncing and this is not adding my events back to ical on my iphone. Please help!
    Are you trying to get them back on your iPhone or back on your Mac?

  • Can''t Stop Repeating iCal Event Alert!

    I am receiving repeating text messages for two iCal events. I can't make them stop. They are being resent over and over again. Well over 100 times today. I've deleted the events from both the iPhone and iCal on the computer the iPhone syncs to. Nothing makes them stop. Help!

    Taking one for the team and on the phone with AppleCare right now. I'll try to take good enough notes to post back here. If nothing else, I'll see if I can post the support notes as documented by the rep as soon as it's published:
    On the phone with second person who is taking notes before transfering me to a third. While I'm waiting, thought I'd share what the first person had me do.Note that this did NOT fix this or any of what I suspect are Finder issues but it can help with some system wide glitches. In any case, it can't hurt:
    Reset PRAM. This is easy.
    1. Shut down your computer completely.
    2. Turn it back on and immediately, hold down the Control, Option, P and R keys.
    3. You will hear the usual chime.
    4. Keep holding them down until you hear it chime a second time and then let go.

  • Old iCal events reopenning

    Hi,
    I have two problems (both comes with Lion)
    1. old iCal events are reopenning and I cant to delete them (they reappear again after deleting)
    2. several apps and docs automaticaly openning after restart (I forbidden it before restart)
    Does somebody know solutions of these problems.
    Thanks.
    Petr

    There's no setting for this. It's just the behavior that Apple has designed. If you're unhappy with it, feel free to let us know by sending us some feedback through: http://www.apple.com/feedback/iphone.html

  • Is there any way of dragging and dropping an iCal event showing in week view across to a date in the left sidebar monthly calendar?

    Hi, Im not a frequent forum poster, as most of my questions can be found already answered on them!
    This is a question Ive had for a long time and it amazes me that no-one else seems to ask it. I check at each OS upgrade but its never there...
    Is there any way of dragging and dropping an iCal event showing in week view across to a date in the left sidebar monthly calendar?
    I was able to do this years ago in MS Outlook, and utilized it all the time when I needed to push things back, now I have to open the event and select an new date in the drop-down calendar for each & every event I want to move to a new month at the end of the month.
    If its definitely not possible, how to you ask apple to consider including it - it doesnt seem like a particularly difficult task.
    Thankyou
    Andrew.

    Andrew,
    Is there any way of dragging and dropping an iCal event showing in week view across to a date in the left sidebar monthly calendar?
    No, but you can use cut/paste. Cut (⌘X) the event, then click on the week where you want to move the event, and Paste (⌘V).
    If you have a suggestion for Apple to change that method use: Apple - Mac OS X - Feedback.

  • HT4061 I have tried for 3 days now to restore my iPhone 4, because someone changed my password, and it is impossible. I tried contacting Apple, but need my serial number to even begin the process of chatting with them.  How do I contact Apple, or get my S

    Someone changed my password for my iPhone 4. I have attempted to restore my device now for 3 days, continually being hooked up to the computer, continually having to restart, continually having to power off and then place the device in DFU mode.  I would LOVE to speak with someone from Apple, the only problem is to even begin to wait in line to chat with an Apple representative, I need my device's serial number to begin the lovely process of waiting in line.  How do I A)-Get the device's serial number when it is locked? B)-Begin to wait in line without said serial number?  I am beginning to think it would be much easier to just report the device as stolen, then contact my carrier and have them replace this device.  Am I doing something wrong for it to take 3+ days to restore? It has the most current, up to date software on the device, why in the world would it take 3+ days to simply restore to factory settings?

    If you open it to take out the battery from the iPhone then you forfeit all service for whatever reason from Apple in the future.
    Have you attempt to connect it to your computer and then restore it from iTunes on your computer?

  • HT1688 Someone changed the settings on my iPhone so that I can no longer update my apps or download new apps. I don't have the icon on my phone anymore. Can someone please tell me how to get it back?

    Someone changed the settings on my iPhone so that I can no longer update or add apps. The icon no longer appears. Can someone please tell me how to add that back?

    I should have added that the iTunes app is not displayed on my phone in order for me to add the apps.

  • SharePoint PPS 2013 Dashboard Designer error "Please check the data source for any unsaved changes and click on Test Data Source button"

    Hi,
    I am getting below error in SharePoint PPS 2013 Dashboard Designer. While create the Analysis Service by using "PROVIDER="MSOLAP";DATA SOURCE="http://testpivot2013:9090/Source%20Documents/TestSSource.xlsx"
    "An error occurred connecting to this data source. Please check the data source for any unsaved changes and click on Test Data Source button to confirm connection to the data source. "
    I have checked all the Sites and done all the steps also. But still getting the error.Its frustrating like anything. Everything is configured correctly but still getting this error.
    Thanks in advance.
    Poomani Sankaran

    Hi Poomani,
    Thanks for posting your issue,
    you must have to Install SQL Server 2012 ADOMD.Net  on your machine and find the browse the below mentioned URL to create SharePoint Dashboard with Analysis service step by step.
    http://www.c-sharpcorner.com/UploadFile/a9d961/create-an-analysis-service-data-source-connection-using-shar/
    I hope this is helpful to you, mark it as Helpful.
    If this works, Please mark it as Answered.
    Regards,
    Dharmendra Singh (MCPD-EA | MCTS)
    Blog : http://sharepoint-community.net/profile/DharmendraSingh

  • Trying to change the data source for a Crystal Report.

    <p>The method below represents my best attempt to programatically change the data source of a Crystal Report. The goal is to have a routine that will update the data source for reports after they have been distributed to production servers. So far I have not been successful in saving the report back to the CMS. No exceptions are thrown, but when I view the Database Configuration of the report in the CMC nothing has changed.
    </p>
    <p>
    Am I missing a step, or is there another way to accomplish this?
    </p>
    <p>
    Thank you.
    </p>
    <hr />
    <pre>
    private void test(String reportName)
       throws SDKException, ReportSDKException, java.io.IOException
       IInfoObjects newInfoObjects;
       IInfoObject reportObj;
       ReportClientDocument clientDoc = new ReportClientDocument();
       DatabaseController dc;
       PropertyBag pBag;
       PropertyBag logonProps;
       ConnectionInfo newConInfo;
       ConnectionInfo oldConInfo;
       ConnectionInfos conInfos;
       int connOptions = DBOptions._ignoreCurrentTableQualifiers + DBOptions._doNotVerifyDB; //0;
       Fields connFields = null;
       String queryStr = "Select * From CI_INFOOBJECTS " +
          "Where SI_NAME='wfr.rpt' AND SI_KIND='CrystalReport' AND SI_INSTANCE=0";
       newInfoObjects = getCms().executeQuery(queryStr);
       if(newInfoObjects.size() > 0)
          reportObj = (IInfoObject)newInfoObjects.get(0);
          try
             clientDoc = getCms().getReportAppFactory().openDocument(
                reportObj
                , OpenReportOptions._refreshRepositoryObjects
                , java.util.Locale.US);
             dc = clientDoc.getDatabaseController();
             conInfos = dc.getConnectionInfos(null);
             for(int i = 0; i < conInfos.size(); ++i)
                oldConInfo = (ConnectionInfo)conInfos.getConnectionInfo(i);
                newConInfo = (ConnectionInfo)oldConInfo.clone(true);
                pBag = newConInfo.getAttributes();
                pBag.putStringValue("QE_ServerDescription", "alio");
                logonProps = new PropertyBag();
                logonProps.putStringValue("Trusted_Connection", "false");
                logonProps.putStringValue("Server", "alio");
                pBag.put("QE_LogonProperties", logonProps);
                newConInfo.setUserName("admin");
                newConInfo.setPassword("password");
                dc.replaceConnection(
                   oldConInfo
                   , newConInfo
                   , connFields
                   , connOptions);
          catch(ReportSDKServerException Ex)
             String msg = "A server error occured while processing the " + reportObj.getKind()
                + " object, " + reportObj.getTitle() + " (" + reportObj.getCUID() + "), from the CMS.";
             Utility.errorOut(msg, Ex);
          catch(Exception Ex)
             String msg = "An error occured while processing the " + reportObj.getKind()
                + " object, " + reportObj.getTitle() + " (" + reportObj.getCUID() + "), from the CMS.";
             Utility.errorOut(msg, Ex);
          finally
             clientDoc.save();
             getCms().commitToInfoStore(newInfoObjects);
             clientDoc.close();
    </pre>
    Edited by: Mark Young on Sep 10, 2009 2:16 PM

    <style type="text/css">
    /<![CDATA[/
        body
            font-size: 1.125em;
              font-family: helvetica,arial,"sans-serif";
          .code{font-family: "courier new",courier,mono,monospace}
          .bi{font-style: italic; font-weight: bold;}
    /]]>/
    </style>
    <p>Justin,</p>
    <p>
    Thank you for the reply. Time constraints have not allowed me to post back to this tread
    till now. I will try your suggestion. My assumption is that <i>Save the report back to the
    info store</i> refers to <span class="code">IInfoStore.commit(IInfoObjects)</span>.
    </p>
    <p>
    I'm afraid that I do not understand why I don't want to change the report client document,
    or why <i>successfully exporting the report with the new login/password</i> is not what I
    want to do. Any explanation on that statement would be appreciated.
    </p>
    <p>
    I did find a way to accomplish my goal. It involved adding the SSOKEY property to the
    logon property bag. Below you'll see my revised code which modifies the report logon and
    server. I have no idea what
    this does, and SAP support has not been able to tell me why it works. However, what I
    discovered is that if I changed the report option, <b>Database Configuration -> When
    viewing report:</b>, in the CMS to <span class="bi">Use same database logon as when report
    is run</span> from <span class="bi">Prompt the user for database logon</span>, then the
    SSOKEY property had been added to the logon property bag having an empty string as its
    value. This allowed me to successfullyupdate and save the modified logon back to the CMS.
    </p>
    <p>
    So I took a chance and added code to always add the SSOKEY property with an empty string
    as its value, and I could then successfully modify and save the report's logon info
    and server. Again, I don't know what this means, but it has worked so far. If anyone has
    some insight or comments, either are welcome. Thank you in advance.
    </p>
    <br />
    <hr />
    <pre>
    private void changeDataSourceOfAWFCrystalReports()
       throws SDKException, ReportSDKException, java.io.IOException
       IInfoObjects newInfoObjects = null;
       IInfoObject reportObj = null;
       IReport curReport = null;
       ReportClientDocument clientDoc = new ReportClientDocument();
       DatabaseController dbController;
       PropertyBag pBag;
       PropertyBag logonProps;
       ConnectionInfo newConInfo;
       ConnectionInfo oldConInfo;
       ConnectionInfos conInfos;
       int connOptions = DBOptions._ignoreCurrentTableQualifiers + DBOptions._doNotVerifyDB;
       Fields connFields = null;
       String outputStr;
       int numOfReports;
       int numOfQueryPages;
       double progressIncrementPerPage = 30;
       int progressIncrementPerReport = 0;
       // Path query to reports is in a .properties file.
       String queryStr = getAppSettingsFile().getWscAwfCrystalReportPathQuery();
       try
          // Executes IInfoStore.getPageingQuery() and generates a list of queries.
          getCms().setPathQueryQueries(queryStr, 100);
          numOfQueryPages = 0;
          // Gets a List&lt;String&gt; of the IPageResult returned from IInfoStore.getPageingQuery().
          if(getCms().getPathQueryQueries() != null)
             numOfQueryPages = getCms().getPathQueryQueries().size();
          if(numOfQueryPages &gt; 0)
             // Use 30% of progress bar for the following loop.
             progressIncrementPerPage = Math.floor(30.0/(double)numOfQueryPages);
          for(int queryPageIndex = 0; queryPageIndex &lt; numOfQueryPages; ++queryPageIndex)
             // Gets the IInfoObjects returned from the current page query
             newInfoObjects = getCms().getPathQueryResultSetPage(queryPageIndex);
             numOfReports = newInfoObjects.size();
             if(newInfoObjects != null && numOfReports &gt; 0)
                progressIncrementPerReport =
                   Math.round((float)Math.floor(progressIncrementPerPage/(double)numOfReports));
                for(int reportIndex = 0; reportIndex &lt; numOfReports; ++reportIndex)
                   reportObj = (IInfoObject)newInfoObjects.get(reportIndex);
                   curReport = (IReport)reportObj;
                   clientDoc = getCms().getReportAppFactory().openDocument(
                      reportObj
                      , OpenReportOptions._refreshRepositoryObjects
                      , java.util.Locale.US);
                   dbController = clientDoc.getDatabaseController();
                   conInfos = dbController.getConnectionInfos(null);
                   for(int conInfosIndex = 0; conInfosIndex &lt; conInfos.size(); ++conInfosIndex)
                      oldConInfo = (ConnectionInfo)conInfos.getConnectionInfo(conInfosIndex);
                      newConInfo = (ConnectionInfo)oldConInfo.clone(true);
                      pBag = newConInfo.getAttributes();
                      pBag.putStringValue(
                         "QE_ServerDescription"
                         ,getConfigFile().getDBDataSourceConnections());
                      logonProps = new PropertyBag();
                      logonProps.putStringValue("Trusted_Connection", "false");
                      <b>logonProps.putStringValue("SSOKEY", "");</b>
                      logonProps.putStringValue(
                         "Server"
                         ,getConfigFile().getDBDataSourceConnections());
                      pBag.put("QE_LogonProperties", logonProps);
                      newConInfo.setUserName(getConfigFile().getUNVConnectionUserName());
                      newConInfo.setPassword(getConfigFile().getUNVConnectionPasswordDecrypted());
                      dbController.replaceConnection(
                         oldConInfo
                         , newConInfo
                         , connFields
                         , connOptions);
                      newConInfo = (ConnectionInfo)conInfos.getConnectionInfo(conInfosIndex);
                   } // end for on conInfosIndex
                   clientDoc.save();
                } // end for on reportIndex
             } // end if on newInfoObjects
          } // end for on queryPageIndex
       } // end try
       catch(ReportSDKServerException Ex)
          // handle...
       catch(Exception Ex)
          // handle...
       finally
          getCms().commitToInfoStore(newInfoObjects);
          if(clientDoc != null)
             clientDoc.close();
    </pre>

  • How do I transfer all the data (contacts, iCal events, etc.) on my iPhone to my computer?

    My hard drive crashed.  I didn't have anything backed up.  Therefore, since I have all of my iCal events, contacts, etc. on my iPhone, I have not yet synced my phone with my computer since I got the new hard drive.  Its going to delete everyone in my contacts and everything on my iCal.  Is there a way to upload all of that information onto my computer so I don't loose it all, and I can once again sync our phones up to the computer? 

    Thanks!  I talked to Apple about this on the phone.  They helped me figure out to check the sync box for contacts, iCal, and then "merge info."  All of my music and videos will not merge over to the computer unless the data is formatted by Apple.  But at least I can get my contacts and my iCal events transfered over!  Thanks Apple for helping me with this issue.

  • How to change the jta-data-source for projects in EJB 3

    Hi all,
    Sorry my english! :)
    I'm learning the EJB 3.0 and I'd like to change jta-data-source for projects in JDeveloper 10.1.3.1.
    I explain:
    In the same Application, I have a project with all Entitys and Session Beans. At the moment, the persistence.xml file is there with the jta-data-source tag.
    I make a new project with JUnit (Cactus) for test the EJB's that I'd like jta-data-source reference the test database.
    I make another project, with Servlet/JSP/JSF that use EJB's with interface and I'd like jta-data-source reference another database.
    What kind of changes (workaround) I could make to solve this problem?
    Thanks a lot!
    Luciano

    Hi,
    There are COOM data source which may suits your needs.
    please check data source
    0CO_OM_WBS_6
    0CO_OM_WBS_3
    Base tables are COSP and COSS.
    Check about coom data source, if not suitable then go for custom data source.
    About table cross verify with your source team.
    Thanks

  • Changing date format for some of the date columns in a subject area

    Hi,
    I have a requirement to change the date format for some of the date columns to dd-mon-yyy for only a particular subject area. Is there a feature available in the RPD which can help me do this?
    In Answers - Column Properties for a Particular column of a report, we can save the style and formatting as system wide default for the particular column or the data type, but that applies across subject areas.
    I tried with the config files too , but that too applies to all suject areas.
    Thanks in Advance,
    Gaurav

    Why don't you create 2 logical column derived from same date physical col and then change the format for one logical column and use it in Subject Area ?

  • Can someone explain how data is fed to the usage details screen in My Verizon?

    Can someone explain to me how I can view my data usage for a past date today and when I look at the same date a few days from now there will be additional data. Customer support were adamant that the data usage details come directly from my device so I commented that my device must be saving usage and sending it to Verizon arbitrarily to which I was met with silence on the line.
    Here's an example - on 4/1 I checked my data usage details for the date of 3/21 and it looked like this:
    03/21/12
    08:43:00 PM
    0.02518
    03/21/12
    09:17:00 AM
    0.01475
    03/21/12
    07:20:00 AM
    0.01730
    then on 4/7 when I checked my data usage details for the date 3/21 it looked like this:
    03/21/12
    11:45:00 PM
    1.15382
    03/21/12
    11:38:00 PM
    0.24853
    03/21/12
    08:43:00 PM
    0.02518
    03/21/12
    07:50:00 PM
    1.03191
    03/21/12
    06:55:00 PM
    1.18499
    03/21/12
    06:10:00 PM
    1.03968
    03/21/12
    09:17:00 AM
    0.01475
    03/21/12
    07:20:00 AM
    0.01730
    The red rows have been added between 4/1 & 4/7, but where did they come from? This is just one example, it's happening all over my bill and Verizon cannot justify the anomaly and certainly won't consider removing the $40 in overage charges I have this month. Which brings up another question, why doesn't Verizon offer more than 10GB for the mifi? If I want to use more data and am willing to pay for it, I have to go to another provider?

    Hi kellieh,
    When you had your data overage (and the additional spurious charges), how did Verizon respond to you?
    I have just reported a 2x discrepancy between individual device data usage (.89 GB total) and the reported 1.5 GB for my account.  They claim it will take 72 hours to get back to me after they research the problem.
    What avenues did you pursue to make contact?
    I caled 611, then emailed tech support, then sent a private message to Verizon Wireless support.

  • How to change the timezone of all iCal events?

    Hi!
    After importing some items from another calendar most of my iCal events are "floating" and not fixed to any timzone. I would like to have them all in "Europe/Germany". Does anyone know howto set the timezone of all calendar events in one step together? Is there perhaps a solution in AppleScript?
    Thanks in advance!
    SomeBdyElse
      Mac OS X (10.4.8)  

    1)Export the calendar to an iCal File
    2)Use your favorite Textedito to replace
    DTSTART: by DTSTART;TZID=Europe/Berlin:
    DTEND: by DTEND;TZID=Europe/Berlin:
    EXDATE: by EXDATE;TZID=Europe/Berlin:
    RECURRENCE-ID: by RECURRENCE-ID;TZID=Europe/Berlin:
    inside any VEVENT block. Take care not to change anything in the VTIMEZONE block at the beginning of the file.
    3) Save the file and reimport it to a new iCal Calendar. Double check the imported events against their counterparts in the calendar exported.

Maybe you are looking for

  • Internet via my N95 on a Mac

    Hi. I can still be surprised over the missing cooperation from Nokia, regarding Apple hardware. Considering that the OSX is so much better and faster than Vista and XP. Now that I got that issue of my chest. I've been trying to find out how to connec

  • What is the best software to run windows office products

    I am considering moving to a macbook pro from a pc.  What is the best software to use to access microsoft office apps?

  • SDM is throwing error when trying to deploy

    Hi All, Please see below: Feb 15, 2010 12:47:12... Info: Software type of SDA: J2EE *Feb 15, 2010 12:47:12... Info: ***** Begin of SAP J2EE Engine Deployment (J2EE Application) ****** Feb 15, 2010 12:47:12... Info: Starting cluster instance processes

  • Can you convert a variable text (spanning multiple rows) but fixed

    Hi all, I have a PDF table with 5 columns, couple of title rows at the top and four lines per row table into Excel? I'd want each excel row to have four lines as four combined rows. Think of each column as a date, an ID, a mailing address, an amount

  • Duplication of GR in SAP

    Hi Experts How to restrict Duplication of GR entry in SAP for one receipt though there is a open qty in PO will be rewarded