If the data network is not available for some time, to get it again we need to restart the phone instead it is not finding the data network instantly. why cant the iphone searches data net work offten if not available. i am totally disappointed with this!
If the data network is not available for some time, to get it again we need to restart the phone instead it is not finding the data network instantly. why cant the iphone searches data net work offten if not available. i am totally disappointed with this!
Still it could not find the data network.it searches for voice network instantly and works too. but even full voice network available, there is no data network.when i restart the phone it could find data network.
Already i reset network settings for two times.
Similar Messages
-
I just updated my phone to iOS7 and me and my mom have the same apple ID, so now for some reason I get all the text messages that are sent to her iPhone on mine..? Help please!!
Stop sharing an Apple ID. That is the cause.
Settings > Messages > Send & Receive > You can be reached for messages at... -
I have been having issues with my iCloud email on my iMac. For some time period, everyday, it won't reload and often shows symbols instead of letters for the text. Any ideas how to solve?
All I can suggest is that you open that file on the MBA and save it as a new file, then see if you can open the new one on the iMac.
-
My airport extreme continuously blinks orange. I have tried unplugging and starting again also pressing the reset button to no avail. It shows as connected to the internet but when selected in airport utility I just receive the message "unexpected error occurred try again" and I can't get past this point. any ideas?
Do a factory reset .. nothing will be deleted from your backups and you will be able to get access to them again.
The Factory Reset Gen1-4.
Unplug your TC. Hold in reset. and power the TC back on.. without releasing reset for about 10sec. When the status light flashes rapidly; release it.
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility. -
Question says it all thanks.
- Restore to factory defaults/new iPod if you have not already tried that. If you still have the problem after that then it is very likely you have a hardware problem an an appointment at the Genius Bar of an Apple store is in order.
- Or maybe there is a problem with your cable or USB port/computer. Wehn you get the error again I would see if you have the same problem/error message with another cable and computer. -
after using it for like 10 minutes it gets really hot
If you think there is a problem with your Device, then take it in to the Apple Store or AASP, and get them to check it for you...
-
I need to contact Apple for unauthorized charges on my ipad. It got hacked.
Does anyone know which email I can contact apple on? The site is just endless links with no direct email help.You need to get control of your Apple ID back, change the password;
Manage your Apple ID -
https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/
Then contact iTunes Support, which can only be done by email;
iTunes Support -
http://www.apple.com/support/itunes/ -
I've had my iPod classic for some time now, and up to now have been connecting it to my laptop to sync any downloaded tunes from iTunes. Unfortunately, the laptop has died and I'm thinking of buying a iPad.....but how do I now get any songs downloaded from iTunes to my iPod?
If an iPod is set to update automatically it will be associated with a particular library. If you connect that iPod to a different computer or a different library on the same computer you get the the message you are referring to. "The iPod "iPod Name"is linked to another another iTunes music library. Do you want to change the link to this iTunes music library and replace all existing songs and playlists on this iPod with those from this library". To use an iPod on multiple computers you change the update method to "manually manage songs and playlists". You can also use multiple iPods on a single computer so you will be able to connect both of your iPods to your existing iTunes. Connect the new iPod and follow the on screen instructions, iTunes will open and update your iPod.
For info:
The iPod offers three ways to transfer music from your computer. You can select one of the following update modes from the iPod Preferences menu in iTunes (Edit=>Preferences=>'iPod' tab):
1) Automatically update all songs and playlists. This is the default mode, in which your entire music library, including playlists, is automatically synced to your iPod. If the music library on your computer exceeds the iPod storage capacity, you are prompted to select a different update method.
2) Automatically update selected playlists only. With this option, iTunes automatically copies the playlists you have selected to the iPod when you connect it to the computer.
3) Manually manage songs and playlists. You can also choose to transfer music to the iPod manually. This allows you to drag and drop individual songs and playlists from iTunes to the iPod. -
My iPhone 5s has stopped playing music out of the speakers. It works when I plug in my headphones but other than that there's no sound. It just randomly happened so I'm not sure if I can fix it or if I need to bring my phone in. Help?
Hi Cassilecompte,
If you are not getting any sound from your iPhone’s speaker, you may want to troubleshoot using the steps in this article -
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
Thanks for using Apple Support Communities.
Best,
Brett L -
Hello everyone my iPhone 5s sounds stop working.i did not do anything it just stop working when I tried to turn on my music player all the sounds is not working I already check the volume and it is not also muted :( what happened can anyone solve my problem please
Hey Kirby17,
Thanks for using Apple Support Communities.
If you are not getting any sound from the speaker, follow this article.
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
Ensure that there is nothing plugged in to the headset jack or the dock connector.
If the iPhone is in a protective case, make sure that the speaker port isn't blocked by the case.
Make sure that the speaker and dock port aren't clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush. Carefully and gently brush away any debris.
If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
If the iPhone is paired with a Bluetooth headset or car kit:
Try turning off Bluetooth.
If you experience difficulties with the Bluetooth feature, follow these troubleshooting steps.
Restart the iPhone.
If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
If the issue is not resolved, please contact Apple Support.
Have a nice day,
Mario -
Hi, my iphone power button doesnt work. Its not turning off and is getting hot since the screen is not turning off.
Use the assistive touch controls
General >. Accesabilty >> assistive touch -
The Bluetooth low energy protocol is not backward compatible with classic Bluetooth protocol.
My iPhone 4s can not find my sonny in-dash player. However my iPhone 3GS does it. Very disappointed with this.
Any idea how it can be fixed??????Hello,
You are correct, Blue tooth low engergy, BTLE.(only) devices are not backward compatible with Classic bluetooth and cannot connect.
However the Apple 4S and above have Bluetooth 4.0 support.. Hardware wise it has bothClassic Bluetooth, like the 3GS, as well as Bluetooth Low Energy. There is no good reason why your 4s cannot communicate to your Sony in-dash player using the Classic bluetooth that resides in the 4S.
I know that this does not answer the why it does not work, but it should work. Do you have to somehow re-pair the new phone up to the player? Not knowing the model of the Sony it is hard to investigate.
And I hate to ask but are you sure that the Bluetooth radio is on in the phone?
JT -
My Iphone has a problem with the microphone it doesn't seem to work! so there for i can't use Siri anymore.. this has been playing up for some time now. But as my wife & I had a baby 7 Months ago I have not found the time to pop in to the apple store until today (8/12/13) and they told me that they couldn't help as it's out of it's warranty by 57 days
Can antone help me? is there something i can do, apart from buying a new iphone!Have you got Siri turned on in settings/general/restrictions?
-
My iPhone 4s doesn't work. i can not swipe to open it or to even turn it off. what can i do??????
my iPhone 4s doesn't work. i can not swipe to open it or to even turn it off. what can i do??????
I would attempt a reset. This is done by holding both the powerbutton and the home button for about 10 seconds for it to restart.
When it boots back up, test the issue. If the issue persists, I would then recommend a restore through iTunes on a computer, set up as new, and test again. If it's now working, i'd recommend to restore from your last back up see if it resolved your issue.
Hopefully the first reset solves it, in most cases it does.
Regards -
My new iPhone randomly just stopped working and will not turn on what should i do?
My new iPhone randomly just stopped working and will not turn on what should i do?
thanks paul, i just had a similar problem, had to hold it for 30 seconds and the apple sign has come up, my phone was vibrating for over two hours completly unresponsive, now my lap top seems to be comunicating too, oh hello, its back on again...thank you!!!!
Maybe you are looking for
-
Apex 4.2.1 - Reserved application ids?
APEX 4.2.1, Oracle 11gR1 We have application ids 200 and 201 in a workspace. We needed to clone 201 from a prior version in VSS. So I pulled out the version from VSS, ran the following snippet to install it as application 202 (id is not used in the i
-
FF5 error parsing CSS font-face with url inline base64 data
Firefox 5 refuses to parse CSS @font-face with url inline base64 data. I use the declaration: <style type="text/css"> @font-face { font-family: 'MyFont'; src: url(data:font/truetype;charset=utf-8;base64,[base64data]); </style> then used this way: <di
-
Should I use Sub-Equipment Hierarchy for sub-systems (first post)?
I am 2 months into the maintenance manager role for a fleet of Locomotives and it has been decided to use SAP PM by senior management based on a separate business arm requirements. I believe for this to be successful the first step is to get the stru
-
Exection of the messages in specified sequence
Hi, Scenario : Proxy - Soap MM : Multi mapping Interface determination : enhanced ID Single incoming message and Multi mapping split that into 3 target messages. Mesg_1 Mesg_2 Mesg_3 No problem till this step but when the messages are actually sent,
-
Permissions Not Preserved When Saving/Copying to OS X 10.4 Server
The Setup: One G4 Running Mac OS X 10.4 Server 6 Clients Running OS X 10.4 2 Clients Running OS X 10.5 The Problem: When saving or copying documents from one of the 10.5 clients to the 10.4 server, group write permissions are not preserved. What I've