If user login in portal we need to assign him, the perticular system

Hi all,
i have the requirement
if user logins in portal, depending on the user we need to assign him a system( bapi or rfc),
the user database is maintained in a table in MDM. if an user login in portal it should check in MDM to which region(america, asia.europe....) it belog,s to. according to that we need to assign the system(rfc or bapi). if the user belong's to two regions we need to assign the two links(rfc's or bapi's) regions,
help me in doing step by step
Thanks in advance
Best Regards
charan

Hi Charan,
This is same thread as - Depending on the user we need to assign the system
Regards,
Sen

Similar Messages

I need to re-install the operting system on my PC will I lose my playlists?

Hi
I need to re-install the opertaing system onto my PC (Windows XP) will I lose my playlists etc )
Paul

You could try copying the iTunes library files, putting them on a external hard drive and the setting iTunes to look there for the library on the new computer.
Jason

Users are created but Roles are not Provisioned in the Target System

Hi,
It would be great if somebody would provided solution to my problem. The problem is when I try to create the Users in Identity Managment UI then the Users are created in the Target systems but the Roles are not provisioned to the Users.
In the provisioning job SetABAPRole&ProfileForUser,
It is says In the Error putNextEntry failed storing
Exception from Modify operation:com.sap.idm.ic.ToPassException: User does not exist
MSKEY 58437
Please note the When we create the User, the user is created however the Roles is not provisioned to the user.
Regards,
Hakim

Hello Nits,
since this thread is from 2010 and the OP was logged on last in 2012 (as you can see in the profile), I don't think you'll get an answer here.
Please create a new thread to explain your problem (with version and SP numbers, logs etc). You can add a link to this thread to show, that the problem is similar.
Regards,
Steffi.

How to add Popup message as soon as user logins to portal system?

Hi,
I want to display a popup message as soon as user logs on to the portal system.
Regards,
Anagha

Anagha Bhat wrote:
what do you mean by "iView with the popup as the entry point" ?
I think this means, iView's 'Launch in new window' property should be accordingly set..

Have old Power Mac G4, need advice on upgrading the operating system

Hello. Glad I found this forum. Wish it was prominently advertized on the Apple home page. Anyway, I have an old Power Mac G4 running OS X 10.0.4. Well, actually, I've always run it in OS 9.2. In fact recently I started playing with it again and switched it to OS X 10.0.4 and it seems to be unstable. The display dissappears after a while running. The machine is not off, just no display. Hitting the smaller reboot button brings it back up, only to have it repeat the failure. But that's not really my question. I want to use this machine as a Skype phone and for iMovie in OS 9.2. Skype is only available for OS X 10.3.9 and later OS's. So, if it's not a major hassle and expense, I want to upgrade to OS X 10.3.9 or later. That's where I need some advice. Having never attempted such a project, I'd like as much feedback as I can get about what to expect going in. Here are some questions:
1. Will I still be able to run OS 9.2 (either concurrently or by switching the startup disk when needed) if I upgrade to OS X 10.3.9 or later?
2. Will this instability with OS X 10.0.4 dissappear if I uprgade?
3. Where can I find the appropriate upgrade software?
4. Can I jump from OS X 10.0.4 to a version as late as OS X 10.3.9 without any intermediate steps, and without creating all kinds of little inconsistencies that I will have to chase down to make it work right in day to day use.
If I get answers to all that, I'll be blown away by the spirit of helpfulness on this forum! But anything you can offer will be greatly appreciated. I don't really want to do anything fancy with the machine, just Skype, hopefully iMovie and maybe stream some TV programs if all goes well. Thanks for reading through all this and for anything you can offer.
Power Mac G4
Hard drive: 38.34 GB
Built-in Memory: 384 MB
OS 9.2 & OS X 10.0.4

appleysmappley:
Cornelius, clearly you know your Macs!
Thank you. I have great mentors, one of whom is Kappy.
My next question about OS 9 is, if I have to wipe the hard drive, will the Panther retail box I buy include OS 9 or will I need to somehow add it from the original software pack I have after installing Panther?
You have options.
1. You can choose to install Panther using the Archive and Install option, which will leave OS 9 untouched. However, since you currently have OS X 10.0.4 on your drive, I think a complete reformat, erase and reinstall is advisable.
2. You can copy your OS 9 Systems Folder, OS 9 Applications Folder and any data you have have to a USB jump drive, or CD or an external Hard Disk Drive and restore it after Panther or Tiger is installed.
3. You can install OS 9 from scratch. We will give you step by step directions for doing it.
I'm assuming I can't use the disks that came with my laptop to updgrade my Power Mac G4, right?
It may or may not work. However, the Apple Software License Agreement stipulates that unless you have a multiple user license, the OS can only be installed on one computer at a time.
I'm concerned about OS 9 is because I want to be able to run the OS 9 iMovie that I have on the Power Mac G4 now.
If you reinstall OS 9, that should be included. OS X also has iMovie, although I am not sure if it is included in the Retail Version. You can also purchase iLife which will include iMovie and other apps.
What are the potential pitfalls of buying a copy on eBay? What do I need to know to "know what I'm looking for"? What questions should I ask?
The pitfalls are many. There is fraud on eBay (elsewhere, too, I guess), so you want to be sure you get a reputable seller. You want to be sure that you are getting the Full Retail Version, not computer specific gray disks or upgrade installers. You should ask the seller, in addition, whether you can return the merchandise for a refund if it does not work on your computer. Most reputable sellers want to satisfy their buyers and their business depends on their reputation.
Kappy said I would need more RAM (I have 384 MB). Where would you recommend buying that?
Your computer will support a total of 1.5 GB of PC-133 3.3v, unbuffered, 8-byte, non-parity 168-pin SDRAM in 3 slots. You currently have a 128 MB and 256 MB modules in two slots. You can remove one or both and add two or three 512 MB modules. Check out the list of vendors and prices at ramseeker
Good luck.
cornelius

Generate User Login in "Create User" Request

Hi Guys,
I have more a problem. To create user, I am using a Request (Create User Template), I managed add the attributes that would necessary normally, but I use a Event Handler (Post-Process) to generate user login. So I marked the User Login in Attributes Restrictions, fixing an user login default for example: autogenerate.
Then I created a new request to create user, I filled out all the fields that I marked to appear. I approved this request, and the user is created with the User Login generate by my Event Handler normally. The issue is, when I create 2 create user requests, as I use a Default value in the User Login attribute, if the first request still isn't approved, the second request isn't created because the "autogenerate" user login already being used.
Exists some otherwise to I resolve this issue?
Thanks

Hi Bikash,
Use a prepopulate adapter an attribute with timestamp is nice idea, but I use the "Create User" template CreateUserDataSet.xml and not exists a form in Design Console to associate the prepopulate adapter.
I had thought in eventhundler because I use a method that check on Active Directory if the user login generated by other method, already is being used. And I use this eventhandler in HR GTC recon too.
About XL.LDAPReservationPluginImpl, I opened the oracle.iam.identity.usermgmt.impl.plugins.reservation.ReservationInOID but I not understood as use this option. If I needs add in this class my method of generate user login. If I needs implement an new class similar to this class, using my methods and associate the name of class in XL.LDAPReservationPluginImpl.
Thanks a lot

TLN missing for users in Federated Portal Network Setup

Hello All,
We are facing a weird problem in our Federated portal Production setup; when the users login to portal they are not able to see the TLN. On further investigating we found that this issue is happening when the user id is locked in any of the producer portals within our FPN environment due to which the users are not able to view roles related to other systems as well in which there id is active.
This issue is reproducable but only occur once the ID are locked and password is expired in one of the assigned system.
Our FPN setup is as below:
Consumer C connects to Producers
1. A (RDL)
2. B (RDL) - BI Dual Stack
3. D (RRA) - BI Dual Stack
In turn A (producer) connects to 4 ECC systems (F3, M1, R1, R5)
We are using RRA and RDL both in our environment.We have connected all federated portal with P4 Port, so if required we
can use RDL.
Please note our consumer C is EHP1 SP5 and both BI systems B and D are EP 7 sp13.
Any help in this regard is highly appreciated as this is critical issue affecting users in our production environment badly.
Regards,
Priyanka

Hello,
This was an SAP bug. We raised an OSS message and it is taken care now. User now gets TLN and then portal runtime error if the id is locked.
Regards,
Priyanka

User login process after Upgrade from 620 to &7.00

Hi all,
We are on SAP R/3 4.6c, BW 7.0 with BIA 48, SRM 3.0, WAS 620 with ITS supporting portal connections to R/3 and SRM & CUA system which is the issuer of the SSO.
User login to portal with id [it's not sap id used for SAPGUI] and Ldap matches with Employee id and checks with CUA to create the SSO ticket, user can work on R/3 links or SRM links depends on his authorization. R/3 ,BW & SRM having CUA system certificate for SSO.
Communication between Ldap and CUA system is thru ITS and Portal to R/3 & SRM is also thru ITS.
We are planning to upgrade R/3 to Ecc 6.0 and SRM to 7.0, CUA to 7.00 and WAS to 7.00 dual stack systems.
we are thinking Once upgrade is done ,   ITS will be vanished from the environment so the login process will be User login to Portal with ID and Ldap checks with CUA and with the issued ticket user directly communicate wit R/3 and SRM.
Please suggest if we are missing anything on SSO &   the new login process with SSO is right ?
Thanks,
Subhash.G

> We are planning to upgrade R/3 to Ecc 6.0 and SRM to 7.0, CUA to 7.00 and WAS to 7.00 dual stack systems.
Just as an advise: I highly suggest avoiding the installation/upgrade of dual stack instances.
> Please suggest if we are missing anything on SSO &   the new login process with SSO is right ?
Sounds good.
Markus

Bex query crash for user on sap portal

hi gurus
i have a bex query which users see it through sap portal, i have the case where a user X has made some drill down between rows and columns of the query (over portal), and since then every time this user X open the query, portal shows the query on the rows-columns format that the user X used once.
What can i do in order user X see que query (on portal) in the default rows-columns??
This problem just happen with user X, others users see the query in the default format with no problems.
I ve tried deleting the portal personalization for user X on sap portal, but the problem persists...
suggets?
regards..
joker

If its Java only error then there wont be any dump in ST22.
Strange issue for you, in general if we get 500 error, there should be details of it in the same page.
You said this issue is occuring for only one user, is it getting replicated every time?
You are also seeing the same error when u login as that particular user?
Do one thing, assign him the Content Admin role and then do the preview of this iView form content admin and see if ur still seeing this error.
Regards
Yugandhar Reddy

Programmatically adding/deleting users to/from portal groups

I am using the following PDK api, to delete an user from a portal group (otp_sales).
I get the following error which doestn make sense. I tested the following api from a
script shown below. In my application, this gets called from a trigger, and fails
because it sees a ROLLBACK getting used in the API.
<<<<<<<<<<<<< delete_from_group.sql >>>>>>>>>>>>>>>>>>>>>>
DECLARE
BEGIN
moc.wwsec_api.delete_user_from_list (p_group_id
=>MOC.wwsec_API.GROUP_ID('OTP_SALES')
,p_member_person_id =>73);
END;
<<<<<<<<<<<<<<<<<<<<<<<<<<>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
SQL> @delete_from_group.sql
Input truncated to 1 characters
DECLARE
ERROR at line 1:
ORA-01086: savepoint 'DELETEUSERFROMLIST_SAVEPOINT' never established
ORA-06512: at "MOC.WWSEC_API", line 2467
ORA-06510: PL/SQL: unhandled user-defined exception
ORA-06512: at "MOC.WWCTX_SSO", line 849
ORA-06510: PL/SQL: unhandled user-defined exception
ORA-06512: at "MOC.WWCTX_SSO", line 669
ORA-06502: PL/SQL: numeric or value error
ORA-06512: at line 3
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Thanks
regards
-Ananth

We had the same problem and it turned out that deleting a portal user(delete_portal_user), removing a portal user from a list (delete_user_from_list) or updating a portal user, the "savepoint xxxx never established message" came up when there was no context set. If the procedure is called from within a portal page (or as user portal30) ,and the context is set and it works. The solution is to check to see if the context was set, and then set it if not.
if not portal30.wwctx_api_private.is_context_set then
portal30.wwctx_api_private.set_context(p_user_name => 'portal30');
end if;
Hope this helps
Tania

"In the Data Palette window, drag the Login to Portal portlet ..."?

Hi;
In http://e-docs.bea.com/workshop/docs81/doc/en/portal/samples/login.html?skipReload=true it says "In the Data Palette window, drag the Login to Portal portlet onto a placeholder on the page. "What does this mean and how do I do it?
And the following line is "In the Property Editor window, set any relevant properties." - where is the property window and what properties do I want to set and to what value?
thanks - dave

Help please
thanks - dave

Loading swf files for anonymous user login

Hi,
We are having swf file retrieving from oracle database in home page. I can able to view swf file for normal users, but anonymous user login, not able to see swf file in the page. Other image format like jpg/gif files anonymous user login images are loading properly. Pls. kindly advise, where issue occurs.
kumar. G

Hi Ram
Thanks for your response. Let me know, how to connect to oracle database for anonymous user login. Based on that i will work around that approach for fixing this issue.
By
kumar. g

Network User Login Hangs at 'loginwindow' Occasionally

The client is a macbook pro (2012) with 10.8.5, the server is a mac mini also running 10.8.5 (w/ OSX Server).
Network user logins usually work fine. About 10% of the time, however, the loginwindow displays a spinning beachball endlessly after the name/password are supplied. The workaround is to login to the client via ssh and 'kill -HUP' the user's loginwindow process; then the next login attempt will work.
Examining logs, I find that the 2nd through 4th lines of the following sequence of messages appear on the client in the case of the above failure (in the case of a successful login, only the first line appears)...
    Apr 26 08:20:06 whbbook.local WindowServer[153]: Display 0x04248a6a: MappedDisplay Unit 2; ColorProfile { 2, "Thunderbolt Display"}; TransferFormula (1.000000, 1.000000, 1.000000)
    Apr 26 08:20:07 whbbook.local SystemUIServer[36439]: CGSCopyWindowShape: pid (36439) passed NULL window
    Apr 26 08:20:07 whbbook.local SystemUIServer[36439]: could not update menu bar region, 1000
    Apr 26 08:20:07 whbbook.local SystemUIServer[36439]: CGSSetWindowTransformAtPlacement: Singular matrix [0.000 0.000 0.000 0.000]
Google reveals nothing helpful for the search phrase 'SystemUIServer CGSCopyWindowShape'. I suspect the underlying cause of the symptom has to do with the fact that SystemUIServer ended up with a NULL window.
I've already done the usual 'couurtesy' steps of a disk permission repair and a safe boot on both machines.
Any interpretation of this, or recommendations?

Check if this works :
http://social.technet.microsoft.com/Forums/windows/en-US/452798be-30fb-4357-bd6f-827976e3637a/please-wait-for-the-user-profile-service-slow-logon?forum=winservergen
Arnav Sharma | Facebook |
Twitter Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members
reading the thread.

Update user login field

Hi,
The user login is not modifiable from my infomation by the end users. How to make this field modifiable so that end user can modify this.

First, it is a bad idea to allow the user to update the user_login field. You could however make this modifiable by adding the field in user's self profile. But again it is a very bad idea.

Flash the system message every time when user login

Hi all,
My requirment is to diaplay the system message when user login for the maintenance purpose, In SM02 i created a message but it is not working for evary time login, It is displaying only one time, suppose i logoff and again loging message is displaying.
Please tell me how to display system message evary time when user login.
Thanks in Advance,
Thanks&Regards
RP

Hi,
To display system message every time when user login : use the
Enhancement SUSR0001
Short text User exit after logon to SAP System
You also get the Example Code here.
And the Documentation is :
Every dialog user passes through this function module after logon. Yo
can use this to execute individual customer checks here and send
messages to the user.
Do not log off the user and also try to avoid too many dialog boxes.
Regds
Suman

If user login in portal we need to assign him, the perticular system

Similar Messages

Maybe you are looking for