If you dont have the sim card that came with the iphone and you resync it how do you get it to turn back on .?
if you dont have the sim card that came with the iphone and you resync it how do you get it to turn back on .?
You have been syncing the iPhone with iTunes on your computer without a SIM card inserted in the iPhone for how long?
If the iPhone says connect to computer, this means there is a problem with your iPhone that requires restoring the iPhone with iTunes. As already provided, not having a SIM card inserted in an iPhone does not prevent or shouldn't prevent syncing the iPhone with iTunes. Depending on the iPhone model, it is required in order to restore the iPhone with iTunes.
http://support.apple.com/kb/ht3406
To re-activate an iPhone 3G or iPhone 3GS that displays the "Connect to iTunes" screen:
Insert a SIM card from the carrier with which you used your phone. Note: If you are using the same carrier, you can use the activated SIM card from your new device to do this. If your device is unlocked by your carrier, you can use any SIM card.
Connect the iPhone 3G or iPhone 3GS to iTunes on a computer connected to the Internet.
iTunes will then activate the device. You can remove the SIM card at this point and use the iPhone as if it were an iPod touch.
Similar Messages
-
When you open iTunes this message appears. The sim card inserted in this iPhone does not Appear to be supported. Only compatible SIM cards from a supported Carrier may bre used to activate iPhone. Please insert the SIM card That came with your iPhone or visit a supported Carrier's store to receive a replacement sim card.
dear sir.
where i get this replacement sim card.i live in bangladesh.not have support carrier in my coutry..
so how get..please help me.. -
The SIM card inserted in this iPhone does
not appear to be supported.
Only compatible SIM cards from a supported Carrier may be used
to activate iPhone. Please insert the SIM card that came with your
iPhone or visit a supported Carrier's store to receive a
replacement SIM card.It appears that you have an iPhone that is locked to a carrier other than the one you were using. Now that you have tried to update the iOS, it has relocked. That is what happens if you are using a phone that has been hacked to unlock. You have also forfeited support from Apple and from this forum.
-
The SIM card inserted in this iPhone does not appear to be supported.
Only compatible SIM cards from a supported Carrier may be used to activate iPhone. Please insert the SIM card that came with your iPhone or visit a supported Carrier's store to receive a replacement SIM card.I got the same message.
I bought an iPhone 5 at full retail price from an AT&T store. I requested the phone to be unlocked through their unlock portal. The AT&T unlock system asked for the IMEI number, a copy of my receipt showing that I bougth the phone at "No Commitment" price. A few hours later I received a message from AT&T stating that the unlock request was approved. I then followed the instructions to back up the phone and restore it through Itunes. The phone activates normally with the AT&T SIM card. But when I insert my VODAFONE SIM I get the massage "THE SIM CARD... etc.
I tried again to back up & restore the phone 3 or 4 times, no success. I have also allowed 24 hours for the unlock process to complete. Still no luck.
I have checked again on the AT&T Unlock Status portal and it shows "Unlock approved".
Where is the issue here? Do I have to call Apple or return the phone to AT&T and get the unlocked phone through the Apple Store?
Thanks for any help on this. -
Please insert the SIM card that came with your iphone or visit a supported carriers store
please insert the SIM card that came with your iphone or visit a supported carriers store to recive a replacement SIM card
Yes and exactly what is your question here?
Do what is tells you to do and insert the SIM card that came with your phone or if you are having problems, contact your phone comapny/carrier for help.
With no proper quesion and no further information, how on earth do you expect anyone to be able to help you? -
i have upgraded my iphone to iSO version 6 but the problem is the phone was locked it shows that only compatible SIM cards from a supported carrier may be used to activat Iphone.please insert the SIM card that came with your iphone
So then do as it says...insert the SIM that came w/the phone.
-
im trying to unlock my orange phone to tesco mobile, i phoned orange n they sent a set of instructions, following the instructions it comes up with this error "the sim card doesnt seem to be supported, please contact your carrier" please help
How long ago did you contact them regarding the unlock? It takes time.... time as in days or weeks, not hours.
-
my iphon 5 said "only compatible sim cards from a supported carrier may be used to activate iphone. please insert the sim card that came with ur phone or visit a supported carrier's store to receive a replacement sim card" what do i do??? i leave in diferent country now!!!???(((
in many countries to make phones seem less expensive
carriers pay most of the phones price for the customer
but this come at the cost of the phone only being able to work
with the carrier this is called a sim lock
the only people who can remove a sim lock is the carrier which
the phone is sim locked to they been doing it like that for at least 20 years -
Please insert the SIM card that came withyour iPhone or visit a supported carrier's store to receive
Please insert the SIM card that came withyour iPhone or visit a supported carrier's store to receive
And when you did, as directed, what happened?
-
I have a pioneer 50 inch plasma + I purchased new from the company back in 2005. I tried to hook up an Apple Tv to the pioneer receiver that came with the TV. I can not get it to work.
The receiver has two HDMI inputs in the back. However they say they are not for PC's. Furthermore they must be set up by going to the home menu. I tried everything, but I can not get the receiver to talk to the Apple TV. I even tried a connector that uses an HDMI to the Apple TV that has the other side of the cable as 5 RCA cables. I could not get the receiver to see the Apple TV. I have a newer TV in the house, it has no problem talking with the Apple TV. But this older system seems to be handicapped in its ability to talk with the newer Apple TV system.
My Email is [email protected]
Do you have any suggestions
Thanks
BobI could not access the Apple TV on the television. If I put the Apple TV directly into by TV, I have an external sound system (entertainment system), therefore I worry that I would by pass the audio.
Thanks for taking your time to attempt to help! Any more suggestions would be greatly appreciated.
Bob -
I want to sell off my old MacBook Pro and do not want any of my old stuff on it for the next person to fool around with. I'd like a clean-slate for the next guy/gal. It's a 17-inch that I purchased back in '07. It is currently running Snow Leopard after I installed it myself about two years ago. I DO NOT HAVE THE ORIGINAL DISK THAT CAME WITH THE LAPTOP IN THE BOX.
raeusebio32 wrote:
I DO NOT HAVE THE ORIGINAL DISK THAT CAME WITH THE LAPTOP IN THE BOX.
No problem, stick in your 10.6.3 Snow Leopard retail disk you used to upgrade from 10.4/10.5 with
If you don't have this disk anymore, you can order one online at Apple.com for $29, they don't sell it in the physical stores.
http://store.apple.com/us/product/MC573Z/A
Reboot holding the c or option key down to boot from the disk, select Disk Utility from under the Utilities menu on the second screen (first is language selection)
Now select your boot drive on the left with the drive makers name and disk size and click Erase > Security Option > Zero All Data and click Erase
It will take some time to complete as it's making sure all your personal data if not easily recoverable off the drive using software.
Now quit and you will be back in the installer window, install 10.6 and it will reboot to the "Welcome Video" you can choose to press the power button down and do a hard shutdown, the computer will boot again to this video for the next owner.
If you need even more security in your data deletion efforts I suggest you read this
How do I securely delete data from the machine? -
A few days after i've updated to iOS 8.1.1 my iphone 5s died and isn't turning on and its not charging. i have my legit charger that came with my phone and after 6 months it stopped working, i even have a charging case and that wont charge it. I google searched the problem and tried cleaning the charging port but still nothing! some please help
Please make a Genius Appointment and take it in for service.
If your iPod Touch, iPhone, or iPad is Broken
Apple does not fix iDevices. Instead, they exchange yours for a refurbished or new replacement depending upon the age of your device and refurbished inventories. On rare occasions when there are no longer refurbished units for your older model, they may replace it with the next newer model.
ATTN: Beginning July 2013 Apple Stores are now equipped to do screen repairs/replacements in-house on iPhone 5 and 5C. In some cases while you wait. According to Apple this is the beginning of equipping Apple Stores with the resources needed to do most repairs for iPhones, iPads, and iPod Touches that would not require major replacements. Later in the year the services may be extended as Apple Stores become equipped and staffed with the proper repair expertise. So, if you need a screen repaired or a broken screen replaced or have your stuck Home button fixed, call your local Apple Store to see if they are now doing these in-house.
You may take your device to an Apple retailer for help or you may call Customer Service and arrange to send your device to Apple:
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support: Contacting Apple for support and service - this includes international calling numbers.
You will find respective repair costs in the appropriate link:
iPod Service Support and Costs
iPhone Service Support and Costs
iPad Service Support and Costs
There are third-party firms that do repairs on iDevices, and there are places where you can order parts to DIY if you feel up to the task:
1. iResq or Google for others.
2. Buy and replace screen yourself: iFixit -
I just replaced my hard drive due to failure in my Mac mini. I am trying to load the Snow Leppard OS from the DVD's that came with the unit. Is there a step-by-step procedure somewhere that would help me? This is my first problem with my first Mac. I thought getting to the hard drive and changing it would be the hard part but I made it through that with little trouble. My lack of software experience on the Mac is really slowing me down. I believe I'm not making the right choices in the Disk Utility program.Any help would be greatly appreciated. Thank you.
Prep the new drive:
Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Upon completion quit DU and return to the installer. Install OS X. When the installation has completed you can proceed to restore your data from your backups. If you have an existing backup from Time Machine or another hard drive then upon completing the Setup Assistant you will have an option to restore from another Mac, a TM backup, or another drive. Use the appropriate option. -
After I write a note in the notes icon that came with the ipad, it immediately emails it to my email account and erases it from the note pad. How do I make it stay on the notepad? I don't particularly want it emailed to me.
I have a test with some questions (multiple choice, FIB, matching, etc). I have just one button to submit all the answers, and after submiting the student can see his score and review the test to know where he failed. He can't answer again. However, he can change the answer multiple times before submiting.
"if i turn on success/failure captions the student will see them while answering" - before submitting
"if i turn them off he wont know what's the right answer" - after submitting
My results page is the default. I didn't use any variable. When i go to the results page after reviewing the test all the entry boxes are "wrong". -
If I do a full system restore on my MBP will i get ilife off of the boot disks that came with the computer.
Hi on my MBP i am going to restore it.
It came with iLife will this be on the boot disks?
ThanksIf your computer shipped with Snow Leopard, that means it shipped with two disks: an Install disk that contains the OS, and an applications disk that contains the iLife suite. You would use the applications disk to reinstall iLife.
Maybe you are looking for
-
How to restrict the delivery quantity not more than target quantity?
Dear Gurus, How to restrict the delivery quantity not more than target quantity in a scheduling agreement? I think there are 2 methods. 1. I found that setting 0 in Overdelivery Tolerance Limit in Info Record is not effective. Why? 2. I want to set E
-
Filter criteria on added field in VF04 gives error and does not filter
Hi! I have added a filed WBS to the output of VF04 using a exit. What I did was added the wbs filed to the table VKDFIF table and then used the exit ZXV6PU08 to get the values in the VF04 output. The display output for VF04 does bring in the values f
-
How to determine recordcount in BLOCKs
I am in a masterblock M and I want to dermine the recordcount from detailblock D. I dont find a attribute with get_block_ property and I dont want to "Jump" in the detailblock. Is there an EASY possibility?
-
Problems with iPhoto and Photo Booth
I can't open or use iPhoto. When I click on the icon on the dock, a pop-up comes up and says I "cannot create new library" because I "do not have enough access privileges". Then when I click Photo Booth a pop-up says Photo Booth cannot save any photo
-
New to JBoss/JMS: Help to get started
Hi, I'm a J2EE programmer (and have been one for a while) but have never used JBoss or JMS, and need to know how JMS works in JMS, how to setup queues, monitor them (perhaps using HermesJMS), etc. I use Eclipse (new to me as well), so would like to k