If your top bottom on the iPhone doesn't work and it's not insured can Apple do anything?
If your top bottom on the iPhone doesn't work and it's not insured can Apple do anything?
If you are talking about the sleep/wake button then the answer is yes. You will have to pay the out of warranty fee for replacement
$149+tax
Similar Messages
-
i have some problem with my computer because when i turn it up, the screen turns in a blue colour and the sound doesn't work and in this way i can't hear anything
Will u help me or not?
-
I just upgraded the software on my iPhone 4s. Now the touchscreen doesn't work and on the screen is the itunes logo, an arrow and a plug. I have powered it off and on and nothing changes
The iTunes icon and cable means that it's gone into recovery mode - you will need to connect the phone to your computer's iTunes and you should be able to use that to reset the phone, and you can then restore/resync your content to it
-
In my first iPhone 5, the speaker didn't work and people could not hear me on Speaker phone when I used it. When I used the video recording it did not record sound at all only a hissing/static sound, no voice. I wished for a software fix. I did a hard reset, nothing. I did a full restore to factory settings not putting my backup on and the problem persisted.
i have been provided with this info
You can find troubleshooting tips, how-to articles, and moderated
> > discussion forums on our support website:
> >
> > www.apple.com/support
> >
> > iPhone: Basic troubleshooting
> > http://support.apple.com/kb/HT1737
> >
I did every step in the link that i have been provided with (thank you), but I’m
still experiencing the same issue. My experience with Apple has been
excellent and this has been the first time I have experienced something
like this with an Apple product. I hope we can find a quick solution.
In order to get the iPhone 5 as soon as it launched (being a major fan of
Apple products!), I purchased my iPhone 5 from the UK through a friend of
mine who lives there.
My question is: can I have the faulty device replaced within Saudi by one
of the official resellers here (we have 3: STC, Mobily and Zain)? I want to
avoid the disruption, complication and expense of sending it back to the
UK.
Could you advise whether this is possible or not, and if not how should I
go about having the device replaced?
Thank you in advance for your cooperation.Nice try! Take a hike.
-
How to I set an internal link in a PDF document using Preview? After setting a link under the Tools/Annotations menu, the link doesn't work and no detailed instructions are provided via the Help menu other than it showing the pull-down menu selection to make.
No. I am able to use the other features such as underlining, highlighting, adding rectangles and oval and save those changes.
-
HT1338 java doesn't work and there is no update (via apple) available.
Now running mountain lion. Unfortunately java doesn't work and there is no update (via apple) available. What do I do?
Open Terminal (Applications/Utilities/Terminal.app) and type
java -version
press 'return' on the keyboard.
Either
1. You get a version number for Java, in which case enable Java in
Applications/Utilities/Java Preferences.app
Or
2. You get an installer window pop up. After clicking through and installing that, enable Java as in 1. above. -
Count(*) in the loop doesn't work and I really don't know why...
Hello,
I can't figure out why the following doesn't work. I cannot debug for I do not have privileges on this server.
The execution always fails on bolded line. If I substitute the variable with the table name itself it works. The variable is properly populated in each of the iterations as I can see it by using dbms_output package. The small but may be important detail may be I am connected as user A but the tables are in the schema B. However I can list the tables and their columns in all_tab_cols view and there are synonyms made in my schema which allow me to access the B tables without prefixing them.
I get the error:
Error report:
ORA-00900: invalid SQL statement
ORA-06512: at line 26
00900. 00000 - "invalid SQL statement"
*Cause:
*Action:
I ran out of ideas and I do not have access to any of the Oracle instance to be able to debug right now.
Variable type for v_tables is wrong? I do not have some magic privilege to use execute immediate with variable?
Oracle server has a bad day today?
The crap is 11.1.0.7 if it has anything to do with my problem.
Please help if you can.
Grzegorz
declare
v_number number := 646989;
v_current_table nvarchar2(50);
v_itemno number;
type t is table of nvarchar2(50);
v_tables t;
begin
dbms_output.put_line('Working...');
select table_name bulk collect into v_tables from all_tab_cols where column_name = 'ITEMNO' order by table_name;
for i in 1 .. v_tables.count loop
dbms_output.put_line('Number: ' || i);
v_current_table := v_tables(i);
<b>execute immediate 'select count(*) from ' || v_current_table || ' where itemno = :a' into v_itemno using v_number;</b>
if (v_itemno > 0) then
dbms_output.put_line('Current table contains specific ITEMNO: ' || v_current_table);
end if;
end loop;
end;In SQL Plus run this and see what SQL is your code returning. Then execute the SQL individually.
set serveroutput on
declare
v_number number := 646989;
v_current_table nvarchar2(50);
v_itemno number;
type t is table of nvarchar2(50);
v_tables t;
lSqlString varchar2(20000);
begin
select table_name
bulk collect into v_tables
from all_tab_cols
where column_name = 'ITEMNO'
order by table_name;
for i in 1 .. v_tables.count loop
v_current_table := v_tables(i);
lSqlString := 'select count(*) from ' || v_current_table || ' where itemno = :a';
dbms_output.put_line(lSqlString);
--execute immediate lSqlString into v_itemno using v_number;
end loop;
end; -
Clicking 'more' at the bottom of the page doesn't work
Howdy. When i scroll down to the bottom of the first page in of any category in this community, if i click on 'more' it doesn't show more discussions. i'm using a macbook pro with snow leopard. any ideas?
Howdy. See if this helps:
https://discussions.apple.com/thread/5298047?tstart=150 -
The ScrollPane doesn't work, and the TextArea just keep getting bigger!
Here is what I did: I made a Frame first. Then I made a TextArea. Then I made a Scroll. Then I made a panel.
Then I add the TextArea and the Scroll to the Panel, and I add the Panel to the Frame, but the whole thing just doesn't work. Anyway, see for it yourself.
Hope someone can find where I did wrong, thank you very much!
import javax.swing.*;
public class TextArea extends JFrame
public static void main(String[] args)
new TextArea();
public TextArea()
/*Frame*/
this.setLocation(100, 100);
this.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
this.setResizable(false);
/*TextArea*/
JTextArea text = new JTextArea(10, 50);
text.setLineWrap(true);
text.setWrapStyleWord(true);
text.setEditable(true);
/*Scroll*/
JScrollPane Scroll1 = new JScrollPane(text, JScrollPane.VERTICAL_SCROLLBAR_ALWAYS, JScrollPane.HORIZONTAL_SCROLLBAR_NEVER);
/*Panel*/
JPanel panel = new JPanel();
/*Add things together*/
panel.add(text);
panel.add(Scroll1);
this.add(panel);
this.pack();
this.setVisible(true);
}after you make this change, the reasons for your problem
should become clear
/*Add things together*/
//panel.add(text);//<-------------remove line
panel.add(Scroll1); -
I upgraded to iOS 5 on my iphone 3gs now phone service (AT&T) constanly goes in and out and battery does not hold charge. Can someone help me?
It appears to be a bug in iOS5. I have the same problem on the 3Gs and my new 4S.
I eagerly await a patch...... -
The volume doesn't work and just says headphones?
We can't hear anything on the Ipad and when we push on the buttons to turn the volume up or down it just says 'headphones'
A place to start, try giving it a reset. Hold down the sleep and home buttons, past when you see the red power down slider and until you see the silver apple. Let it reboot and try again.
-
10/11/2013
Debit Card Transaction
VERIZON WRLS 08253-01 800-9220204 CA 10/09
$92.30
On October 11th I started an EDGE agreement for the NOTE 3. I make a $92.30 payment over the phone (which is listed above). The lady said it would arrive two days after the phone comes out. It didn't show up two days after it came out and my little Droid X went dead on me. I called customer service and asked if the phone has been shipped yet. They said it has not. I asked if I could pick it up in the store instead. They said yes. They said they would cancel the shipment so I can pick it up in the store. I end up going to the store at Torrance Crossroads and I was just about to get the phone. Then sales rep was trying to force me into buying the case and charger package that was a deal with the phone for $100.I said no and he got hurt and quiet over it. 5 minutes later he comes up to me saying the edge agreement is not cancelled and they can not give me the phone. I asked if there is anything he can do or call customer service and verify because customer service told me it could be done. He said no and walked away.
I call customer service and they say that they stopped the order and told me to go back to the store and try again. I did not wanna see the sales rep at Torrance Crossroads so I go to another Verizon store on hawthorne blvd in Torrance. I try the same process and the same thing happens. I tell them to call customer service and verify what is going on. I wait for 2 hours while they talk to customer service and the financial department. They tell me they will start another edge agreement on my girlfriends line and give me the note 3 so I can use it on my line. They said they waved the fee through some promotion since I went through a lot of trouble getting the phone and I should be getting a check in the mail for the $92.30 I paid on 10/11/13.
Ever since then I have been paying for two edge agreements at $29.16 a piece. I have also been paying an extra $8 for insurance on a note 3 that I do not have. I have not gotten reimbursed the $92.30 I paid on 10/11/13. I have been calling customer service since December and have not gotten any where. Today was the last straw when the guy put me on hold and I ended up getting transferred to the sales department... What should I do? Is there anyone that can actually help my situation out. I already suspended my line and will do so for the next 5 months until this is fixed.@Dakotaep
I am so sorry to hear of your experience with purchasing your new Samsung Galaxy Note 3! This definitely should have been resolved in your first call to us. I would be glad to review your account and ensure the Edge Agreement is corrected. Please accept my "Follow" request and send me a direct message so I can further assist. Thanks!
AnthonyTa_VZW
Follow us on Twitter VZWSupport on Twitter. -
Downloaded 10.5 iTunes and when I put in an audio book to import into iTunes as soon as I begin typing book info notice appears that iTunes has stopped working and windows 7 closes iTunes. Anyone else have this problem? I hate that you have no way to contact these people and report problems. I tried the old feedback but that didn't get anywhere. Please, I've got several audio books to load and I'm not getting anywhere. Thanks
You really need to put your codes between the
[\code] tags
see http://forum.java.sun.com/features.jsp#Formatting
for more infoCode tags might make it look a little better, but there's still too darn much code. We're volunteers, after all. It'd be a lot of work to review all of this stuff. Can you demonstrate your problem with something smaller? Learn out how to do a combo box with just a page or two and then appy that to your big problem. That's how I'd do it. - MOD -
I have installed my lexmark x1100 printer to my macpro lion but though it registers its there it keeps telling me that the inkjet pots are not in position or wrongly inserted, how can I overcome this problem which is driving me crackers!!!!!
Thanks for the additional info. If the printer works using your Dell Laptop, then the printer is working fine. The problem is with the driver. The Lexmark X1100 is only compatible up to Mac OS 9.2.2. If you have the Mac OS X, unfortunately, it's not compatible with that OS.
You might want to consider purchasing a new printer - preferably a network printer since you have multiple computers. We do have printers that are currently on sale online. You can check it out here: http://bit.ly/KQBDe0
Those printers are compatible with the newest Operating Systems both for Windows and Mac. It also has drivers for Linux. -
The mouse is completely unavailable, not even able to select anything on the taskbar or start button.
When this started happening I had to restart firefox, then I tried opening the task manager to see if anything was hogging resources and I found simply opening the task manager freed up the mouse, then I found simply using alt+tab to switch windows did it, then I discovered using alt+tab to cycle through the available windows straight back to firefox does it.See "Hang at exit":
*http://kb.mozillazine.org/Firefox_hangs
See "Firefox hangs when you quit it":
*https://support.mozilla.org/kb/Firefox+hangs
Maybe you are looking for
-
Need urgent help ! on skype call monitoring
dear friends , I need your urgent help! is there any way that some one can monitor my skype call , that means some other people can listen what i am talking and what i am chating ...........please help me !
-
How to check if the file is out of synchronization
I would like to check every time my main application frame gets focus if the file has been changed while the frame was out of focus, like what eclipse has, how can I achieve this? (except by saving the file data on loosing focus, is there a better wa
-
While downloading software update for Itunes, got message saying detecting Ipad in recovery mode and telling us to restore Ipad to original settings, which we don't want to do. Also cannot turn on Ipad; shows Itunes symbol with connector. Help!
-
Is gtx770 and gtx780 compatible with 5.5 adobe master collection?
Is gtx770 and gtx780 compatible with 5.5 adobe master collection?
-
Photoshop CS6 cropping tools is not good
Hi! Everyone who is using Adobe Photoshop CS6 product, the cropping tool is not good as when I try to crop the image moves but not the cropping tool which makes confusing and time consuming. When I have to print an emergency photo I have to do it wit