IGS used all memorys and blocked

When we present a query with IGS, then the IGS used all memorys and swap, until there are not any available, and then the system is blocked.
[email protected]

Contact your service provider technical support. Tell them you have this issue which needs to be escalated to BlackBerry level customer support.
They (Tmobile UK) hardlocked it for you, they will need to get BlackBerry to unlock.
Or, you can try one of the private vendors of such MEP locked devices.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

HELP: Premiere Pro CC not using all CPU and RAM during rendering and export

Hello,
I am using Premiere Pro CC on a Windows 7. My timeline is quite simple with two videos, one with the movie (mpeg) and the other with the subtitles (avi).
When I render the sequence in PP or export, the rendering time is way too slow and it only uses around 15-20% of the CPU and 3 GB of RAM.
My hardware config is :
- CPU : i7-4770k 3.50Ghz
- RAM : 8 GB
- Disk : 2 x 3 TB SATA (no raid)
RAM is not the bottleneck, neither the disk access.
I have tried rendering and exporting the same project on an iMac (with an i5 2.7 Ghz and 4 GB RAM and only 1 disk) and the result is 4x faster !!!
The CPU usage is close to 100% as well as RAM usage.
So how come PP uses all resources availble on an iMac and not on a Windows 7 ?
Is there any known bug or software bottleneck on Windows 7 ?
My machine is brand new and nothing much installed besides Adobe products.
Any help is very much appreciated.
Thanks,

I just rendered out a a 2 minute sequence with about 100 clips in it and Colorista effects on everything to the Vimeo 1080 H264 preset. It took about 5 minutes to render straight from Premiere, it used all the recourses it could, my CPU was running at near %100, same with my ram and GPU, I was happy.
Then I did another render with Red Giant Denoiser and it now wants to take 30 mins and it is only using about %20 of the recourses available. My problem isn't that its taking longer with Denoiser but that its not using all of my computers CPU and GPU.
Im rendering at maximum render quality and bit dept to H264 (Im happy to wait the extra time), if I try to use VRB 2 it encodes 1 pass at a time and wants to take up to 40 minutes.
I would appreciate some advice on this.
Premiere Pro CC 2013
2.6 GHz Intel Core i7
NVIDIA GeForce GT 750M 2048 MB (CUDA GPU enabled in Premiere)
16 GB 1600 MHz DDR3
OS X 10.9.4 (13E28)

Photoshop Using All RAM And Making 15gb TEMP Files-HELP!?

Hey Guys,
Having a massive issue with Photoshop CC right now and need help asap!
I was recently working a on a really big PSB file (about 6gb or so) I finished the job, saved it, sent it to client, all went nicely. However now when I open Photoshop for whatever reason it instantly uses all of my RAM, and creates a huge 15gb RandomPrice TEMP file on my SSD scratch disk (as shown in the screenshot, excuse the crude snipping tool skills.) I have tried deleting the TEMP file, restarting my PC and opening PS again but it just starts making the file again, it has also drastically slowed down the time it takes to open PS which used to be about 2 seconds, and is now approximately 20 seconds. I'm pretty well clueless what to do here so throw some suggestion my way guys! EDIT: This temp file always reverts to the exact same size after deleting it, right down to the KB. I can sit in explorer refreshing it, watching the size of the temp file going up, and as soon as it reaches 15,276,080KB Photoshop opens up correctly.
Cheers,
Tom

The rule of thumb I follow to figure out scratch space says to figure on 50 to 100 times the size of your largest file ever multiplied by the number of files you have open. I have seen the scratch file exceed 800 GB once, an admittedly rare occurrence, but it often exceeds 200 GB when stitching large panoramas and the like.
As an example—and stressing that I'm aware that others have even more scratch space than I do—I keep two dedicated, physically separate hard drives as my primary and secondary Photoshop scratch disks and a lot of GB free on my boot drive for the OS. I also have 16 GB of RAM installed.
Additionally, if you only have a single HD, i.e. your boot drive, you'd need it to be large enough to accommodate both the swap files of the OS as well as Photoshop's scratch.

AE CS5 not using all memory and cpu

I am using After Effects CS5, wondering why the rendering is not using my CPU and memory full. It`s using only 15 % of memory and sometimes up to 50 % of CPU. What can I do to make it use better my hardware.
The current rendering is chroma key using Keylight.
I understand it can`t use all the hardware, but why only 15 %, because everybody is talking that you need a lot of RAM for AE.
CPU: Intel Core i7 920 - overclocked to 3.4 GHz
MEMORY: 6 GB DDR3
GRAPHIC: nVidia GTX 285

Not all rendering operations will max out all RAM and all CPUs (processor cores). Some rendering operations are I/O intensive; some are memory-intensive; some are CPU-intensive. If, for example, I/O is the bottleneck, then you won't see either CPU or RAM usage maxed.
Also, the goal isn't to see that 100% of the CPU and 100% of of RAM is being used. The goal is faster rendering (and other operations). Sometimes greatest performance is achieved when there's "headroom" left over for other activity. See this page.
Are you using Render Multiple Frames Simultaneously multiprocessing? That is one feature that really benefits from having a lot of RAM. The 6GB of RAM that you have in your system is not enough to make effective use of that feature. See this page.
Here's a page that collects information about how to optimize for performance.

How do I use all fonts and Microsoft Word?

Although my fonts seem to be installed correctly, I often get a message when I try to use a new font that says "font not available for use in Microsoft Word," or some such. How can I make installed fonts available for Word? (By the way, this was true with earlier versions of OS 10.4, as well.)

Fonts you download or otherwise acquire as font files should be placed in the Fonts folder in your Library or in the Fonts folder in the global Library. Having been placed there, the Mac OS knows what to do and there's nothing more for you to do.
However, if you add fonts to the Fonts folder while an application is running...well the OS is supposed to let the program know about that and the program is supposed to gracefully accept them but it doesn't always work that way. I've never seen the error you mention but I can imagine it occurring if you've just added a font and the program was running. Just quit and restart the program.
Having said that, some programs, Word included, prebuild font lists to enable faster loading times. I can also imagine Word's font list becoming corrupt (which happens all too frequently) which might cause your error message. The fix is to delete the font cache file. (found in the ~/Library/Preferences/Microsoft/Office Font Cache)

OT: What viewers do you need to use ALL audio and video files?

I had a lot of trouble with audio and video files on my PC. I
now have a
MacBook Pro, which is a big improvement. But I still
frequently
encounter files that I can't use. I try to open them, but
Apple doesn't
know what to do with them. For example, I often encounter
unusable
videos while perusing news websites. I also have some audio
files with
.mva or .mvw extensions that don't work.
So what viwers/players do I need to download in order to be
able to play
every audio/video file that comes my way? iTunes handles .mp3
files, and
I also have QuickTime installed. I just viewed another video
after I
installed a Flash plugin. What else do I need to install?
Thanks.
www.geobop.org - Family Websites
www.invisible-republic.org - Adult political websites (Mature
adults only)

VLC is a big favorite
http://www.macupdate.com/app/mac/5758/vlc-media-player

I photo not now opening all photos and ' blocked plug in's' on safari

Please help . This is a new occurrence previously all ok .
Have checked latest version of flash player is installed. Software up to date.

If you want to update the OS, you initiate the download through the AppStore. That said, someone tried this yesterday and it didn't resolve the issue for them.
We tested the upgrade scenario and blocklist functionality on a MacOS 10.6.8 machine and are unable to reproduce the symptoms, but we believe that they exist. We don't know what the common denominator is yet, though.
I'm wondering if a complete uninstall and reinstall of Flash Player might solve it:
Uninstall Flash Player | Mac OS
Then run the installer again.
http://fpdownload.macromedia.com/pub/flashplayer/current/support/install_flash_player_osx. dmg

Question About Java Threads and Blocking

I'm helping someone rehost a tool from the PC to the Sun. We're using the Netbeans IDE and the Java programming language. I took a Java course several years ago, but need some help with something now. We're developing a front-end GUI using Swing to allow users to select different options to perform their tasks. I have a general question that will apply to all cases where we run an external process from the GUI. We have a "CommandProcessor" class that will call an external process using the "ProcessBuilder" class. I'm including the snippet of code below where this happens. We pass in a string which is the command we want to run. We also instantiate a class called "StreamGobbler" my coworker got off the Internet for redirecting I/O to a message window. I'm also including the "StreamGobbler" class below for reference. Here's the "CommandProcessor" class:
// Test ProcessBuilder
public class CommandProcessor {
public static void Run(String[] cmd) throws Exception {
System.out.println("inside CommandProcessor.Run function...");
Process p = new ProcessBuilder(cmd).start();
StreamGobbler s1 = new StreamGobbler("stdin", p.getInputStream());
StreamGobbler s2 = new StreamGobbler("stderr", p.getErrorStream());
s1.start();
s2.start();
//p.waitFor();
System.out.println("Process Returned");
Here's the "StreamGobbler" class:
import java.lang.*;
import java.io.*;
// Attempt to make the output of the process go to the message window
// as it is produced rather that waiting for the process to finish
public class StreamGobbler implements Runnable {
String name;
InputStream is;
Thread thread;
public StreamGobbler (String name, InputStream is){
this.name = name;
this.is = is;
public void start(){
thread = new Thread (this);
thread.start();
public void run(){
try{
InputStreamReader isr = new InputStreamReader(is);
BufferedReader br = new BufferedReader(isr);
while (true){
String s = br.readLine();
if (s == null) break;
System.out.println(s);
//messageWindow.writeToMessageArea("[" + name + "]" + s);
is.close();
catch(Exception ex){
System.out.println("Problem reading stream" + name + "...:" + ex);
ex.printStackTrace();
The "CommandProcessor" class calls two (2) instances of the "StreamGobbler" class, one for "stdin" and one for "stderr". My coworker discovered these are the 2 I/O descriptors that are needed for the external command we're running in this case. We're actually called the Concurrent Versions System (cvs) command from the GUI. Here's what we need it to do:
We want to display the output real-time as the external process is executing, but we want to block any actions being performed on the GUI itself until the process finishes. In other words, we want to show the user any generated output from the process, but don't want to alllow them to perform any other actions on the GUI until this process has finished. If we use the "waitFor()" function associated with a process, it blocks all external process output until the process has completed and then spews all the output to the screen all at once. That's NOT what we want. Also, if we don't use the "waitFor()" function, the code just continues on as it should, but we don't know how to block any actions on the GUI until this process has finished. My coworker tried the following code, but it also blocked any output until the process had finished:
while (s1.thread.isAlive() || s2.thread.isAlive())
// We really don't do anything here
I'm pretty sure we have to use threads for the output, but how do we instantly show all output and block any GUI actions?
Thank you in advance for your help!

You're talking about a GUI, but there's nothing in that code which is putting events into the GUI update thread. You also say that nothing happens to the GUI until the CommandProcessor.Run() method returns if you wait for the process.
This implies that you're calling CommandProcessor.Run() in an ActionListener. This will block the GUI thread until it completes.
I was going to explain what to do, but a quick Google informed me that there's a new class which is designed to help in these situations SwingWorker (or as a [separate library|https://swingworker.dev.java.net/] if you're not up-to-date yet).

Using all memory, including virtual memory

For some reason Final Cut Pro 10.0.3 doesn't get past the loading screen, it's worked fine until yesterday - havent done any system updates, or program upgrades. When I start the program, I can see the square that says FCP, and I can see the interface loading in the background, but it never comes out of that loading screen. It uses all 18 GB of my memory, even after a restart, then it goes to my hard drive for more virtual memory. I have 37 GB free, it uses all that and then 'pauses' according to my Force Quit screen. I'm in a big rush to get this fixed - I work at a church, and this is the Friday before Easter, which is a really big weekend, and of course, people want to see these videos before the end of the day, or earlier.... Any help would be much appreciated!!

Thanks innocentius. I found the culprit, after much troubleshooting and help from Apple. When I loaded Final Cut, the loading screen would always get stuck 'loading the 'easter' event'. There was a PSD file in the easter event that I was working on yesterday that suddenly didn't like Final Cut. In the PSD, I had created a very complex vector shape, and I think Final Cut was trying to render the vector without success. But, it could have just been a corrupted PSD. Either way, I went to the Final Cut Events folder, found the PSD, moved it somewhere else, and voila, everything is back to normal!

ITunes won't sync all photos across from iPhoto to my iPad, either when using 'all photos' or manually selecting the events. All the rest sync normally

Can anyone suggest a workround or reason why I can't sync a batch of about 300 photos in 5 events on consecutive days across from iPhoto 09 to my iPad 2? All the rest (>1000 frames mainly before and some after) go over, including some shot on the same digital camera (before and after). I've tried using 'all photos' and also manually selecting the events individually, they won't go. An album containing some of these photos goes across without them included, and converting the whole album on iPhoto to a movie and then dropping that into my videos won't go either. I've cleared the sync history as advised by the support line, and all software is updated. Loads of room on the iPad

Started having the same issue with my iPad 2 just this week. Tried deleting the iPod Photo Cache, disabling then re-enabling photo sync through iTunes, but keep getting the error: "Some of your photos, including the photo “XXX.jpg”, were not copied to the iPad “XXX” because they cannot be displayed on your iPad." This is with iOS 4.3.5, iTunes 10.4, and Mac OS 10.7 Lion.
Interestingly enough, I have no issues syncing the same exact set of photos to my iPhone 4 (also running 4.3.5). This seems to be an iPad-only issue.

GR Based Invoice Verification and Invoice Post and Block Process

Hi,
We currently use invoice "Post and Block" process for AP invoice processing. GR Based Invoice Verification is not set in the vendor master for this purpose to allow us to enter an invoice where "No Goods Receipt" has been raised. However, when we raise a PO using material groups the flag "GR Based Invoice Verification" is activated in the PO. We subsquently have to remove this indicator in the PO in order to register the invoice. Why is this setting populated in the PO when it is not activated in the vendor master ? Is there a setting in MM for material groups that ius populating this value in the PO where a PO is raised using material groups ?
Thanks

Hello Eilish,
With regards to Goods reciept indicator, firstly the system looks
for any reference documents like purchase order or contract and takes
the flag from there.
If no reference documents or contracts are referenced, then
the system looks for an info.record to take the flag from there.
If there is not a info record then system will carry out the
GR-BasedIV indicator from the vendor master.
Hope this helps,
Ray

How to create a new rule in Windows Firewall to permit some specific IPs and block all other computers

Hello,
I have a Win7 PC. I want to block all incoming connections except 3 or 4 IPs. How can i do this?
I created a new rule to block all connections using this steps:
Inbound rules > New Rule > Custom > All Programs > All Protocols / Ports > All Local/Remote IPs > Block the connectiion > All profiles > Then i gave a name
This rule works fine and blocks all incoming connections.
Then i want to create a new rule to allow specific IPs using this steps:
Inbound rules > New Rule > Custom > All Programs > All Protocols / Ports > Remote IPs: 192.168.10.5, 192.168.10.10 > Allow the connection > All profiles > Then i gave a name
But 192.168.10.5 and 192.168.10.10 couldn't reach W7 machine.
(If rules are disabled or FW is off; both IPs could reach W7 machine)
Thanks

Hi,
How did you check these two IP address? Through remote access? According to your description, it should only allow remote IP could access this computer. Please also allow local IP for test.
Roger Lu
TechNet Community Support

HT1926 download does not start i am using windows 7 and checked the pop-up blocker

download does not start i am using windows 7 and checked the pop-up blocker

Create a new profile as a test to check if your current profile is causing the problems.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer some files from an existing profile to the new profile, but be careful not to copy corrupted files.
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
A possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls

When using FF 5.0, rollover type ads on Facebook game Lexulous pages are 'enlarged' and block 1/3 of the game board. Using up to date versions of Win 7 Home Premium, Adobe Flash and ActiveX

When using FF 5.0, rollover type ads (i.e. ads for XBOX) on Facebook game Lexulous pages are 'enlarged' and block 1/3 of the game board. Using up to date versions of Win 7 Home Premium, Adobe Flash and ActiveX on an HP Pavillion dv7 laptop. Does NOT happen at all in MS IE 8, but occurs every time in FF 5.0.
Also, Google 'translate this page' links do not work in FF 5.0, but works in MS IE 8. All I get in FF is a blank page, time after time.

Hi,
I am using a Nvidia 4200M adapter in my Laptop, Driver 266.96, Direct X 11
In my desktop I am using an ATI XFX 6950, latest revision drivers (I am not at home right now so I cant get that info).
The issue I did describe above, but it was a long explanation.
In some flash games the game files load initially and get as far as the "click to start" button. Then the flash area usually goes either all white or all black (usually depending on the falsh game default background color) and then it stays that color. Cant see anything after hitting start (usually most games have an intro video or animation before the game starts, but I cant see any of it.
For the very few games that do start, the flash game or application does not seem to work correctly in that when the rare game starts, it wont save any game files or save files to the pc and so if I exit the game (navigate away to another page or close browser) and then later come back, even though I click the option to save games (and ensure that the flash application slider shows it can save files and lots of space) it does not save and I have to start from the beginning all the time.
More explanation I gave above.

I want to block all cookies and this option does not appear under the 'options' and 'security' tabs. It seems to have disappeared. What can I do?

I followed the instructions from your website on how to block all co9kies and i did not work. You used to have a simple menu for blocking and unblocking cookies, which seems to have disappeared. If I can't block cookies, then I will have to use another browser where I can. Thanks for your help.

To see all the History and Cookie settings, select:
* Tools > Options > Privacy > History: Firefox will: "Use custom settings for history"
See also:
*https://support.mozilla.com/kb/Cookies
* http://kb.mozillazine.org/Cookies

IGS used all memorys and blocked

Similar Messages

Maybe you are looking for