IHC Cash Concentration F9H4 Error

Hi, I've configured IHC to make external and internal payments. I've also configured it for cash concentration. I've created the respective transaction types and setup an account hierarchy. When I run F9H4 and I go to the application logs, I get the following error:
No entries stored in TBKKIHB4 for account E500/STND_E500_EUR
I'm using SAP ECC 6.0, and I've been told that IHC cash concentration does not use this table anymore, this was used in 4.6 version.
Does anyone know what I might be missing in my configuration?
Thanks
-Anya

Hi Anya,
In the new version of IHC, which is available from EA-FINSERV 500 onwards, the cash concentration process generates 2 payment orders -
1. BCA payment order ( or the OLD IHC payment order - can be viewed via F9I3)
2. IHC payment order (or the payment order created in the new version - can be viewed via IHC0)
This happens only when you configure the module IHC_BCA_EXTERNAL_PAYMENT in the BTE 10310 for application IHC.
This would then call the new version of IHC and post a payment order which you can view from tcode IHC0.
If instead of module IHC_BCA_EXTERNAL_PAYMENT, another module PAYMENT_EXTERN_IHC is configured in the BTE 10310 then it would look for an entry in the table TBKKIHB4 to create a PAYRQ (treated as external payment). And, on finding the table empty, it throws the error message as mentioned by you.
Hope this helps!
Best regards,
Sidhartha

Similar Messages

IHC Cash concentration Account Hierarchy with different currencies - F9H1

Hello Experts,
Can someone please help me find out if it In Tcode: F9H1/F9H2, it is possible to create an account hierarchy with sub account in different currency than the Root account?
I am getting the following error when I try to create an account hierarchy with different currencies in root account(USD account) and subaccount(GBP account)
"Account XXXXGBPYYYY / GBP cannot be inserted; Currency not possible"
Is this a system limitation or are we missing some configuration?
Please advice

Hi Anya,
In the new version of IHC, which is available from EA-FINSERV 500 onwards, the cash concentration process generates 2 payment orders -
1. BCA payment order ( or the OLD IHC payment order - can be viewed via F9I3)
2. IHC payment order (or the payment order created in the new version - can be viewed via IHC0)
This happens only when you configure the module IHC_BCA_EXTERNAL_PAYMENT in the BTE 10310 for application IHC.
This would then call the new version of IHC and post a payment order which you can view from tcode IHC0.
If instead of module IHC_BCA_EXTERNAL_PAYMENT, another module PAYMENT_EXTERN_IHC is configured in the BTE 10310 then it would look for an entry in the table TBKKIHB4 to create a PAYRQ (treated as external payment). And, on finding the table empty, it throws the error message as mentioned by you.
Hope this helps!
Best regards,
Sidhartha

Problem with cross-company cash concentration

I set up a cash concentration to transfer cash from Company A to Company B using the following steps:
1) Transactions FF73 Cash Concentration
2) FF.9 Post
3) FF.D Generate Payment Request from Paymnet Advice
When I tried to display the Payment Request using transasction F8BT, there is no payment request in Company A. However the payment request is showing up in Company B!
I am unable to pay as F111 does not pick up the payment request.
Any know with experience with this issue?

Hi Mamta,
Thanks for the Response. I think you misunderstood my scenario.
For Eg in FB60 with Co code 5065:
I am debiting the Expenses for Co Code 1000(Witholding tax not active) and crediting the Bank Account of Co Code 5065(Withholding tax setup is done for this co code). When I tried to post with these line items I have getting the error.
Posting        GL                   Co Code
Dr          106520(Exp)            1000
Cr          202020(Bank)           5065
For this I tried by activating the Withholding tax for Co code 1000 which is not active before and post it. The system allows me to post the invoice.
I want to know whether is this a right way to solve this issue and will it impact on any other areas by only activating the Withholding tax for a Co code?
Thanks,
Bapu

Cash Concentration

Hello,
Please let me know how you achieved Automatic Cash concentration for US Bank Accounts.
SAP Cash Management helps defining the limits for Concentration account and helps to create payment advices.
What we want is, based on the cash balance on a House Bank Account, system should automatically fund or move the cash from or to Concentration account.
If you achived this using FF73, please let me know the end-end mechanism.
Thanks!

Hi,
Use the T-Code FF73 to run Cash Concentration. Select Company Code as C1 and Target Company Code as C2. Select other parameters. I hope you have already maintained Grouping of your GL a/cs and cash management account name for your target account. Execute and you will get the desired result.
Please let me know if the problem persist.
Thanks and regards,
Abhinav Sethi

Use of Cash concentration

Dear SAP Gurus,
I am using Cash concentration ffunctioanlity. As per SAP help, this functionality helps to transfer the amount from source to target account. BUt this I can achieve using FI posting as well.
I am not able to understand added functionality for using this.
Can you adv me on this.
Thanks

Hi,
The cash concentration enables automatic transfer postings in a specific frequency in a master contract. These are based on carryforward rules and relationship attributes.
The aim of cash concentration is to keep the account balances of the participating accounts within a certain value range at defined times. A main account (root account) at the top of the account hierarchy absorbs the surplus balances of the other accounts or compensates for any insufficiencies on these accounts. You can, for example, specify that an account must always have a certain minimum balance or that the remaining balance on an account is always to be transferred to another account (for example, an investment account) at the end of every month.
Hope this helps.
Raghu

Treasury :Cash Concentration

Can any one tell me the functionality of Cash Concentration?

You take an example of a married couple, both earning, who, at the end of each month you want to transfer the amount exceeding a balance of USD 2,000 from their individual salary accounts, to a third account. This third account serves as joint investment account. To do this you create a hierarchy with the investment account as <b>root account</b> and the two salary accounts as <b>subordinate accounts</b>. Enter a maximum balance of USD 2,000 for each of the subordinate accounts.
This is an example of cash concentration.

IHC internal payment order error

Hello,
Need you help. When i am trying post IHC internal payment order, its not getting posted. when i see the log,its says only : payment order XXXXXX not posted. Error message is IHC298.
Request you to please help to solve this Issue.
Thanks in advance...
Regards,
Satya

Hello Satya,
Check the error log of the payment order. It displays the reasons due to which the Payment order was not posted.
Also check F9B1 transaction to ensure that the posting date has been set correctly.
Best Regards,
Pallavi

While posting cash journal giving error

Hi friends,
I have updated cash in hand balance through f-02.
When i am posting payments to vendor through FBCJ,(amount is 10 Rs.) giving error as Payment amount is larger than Cash on hand. Change amount.
I updated cash in had account by 1000 rs.
Please suggest.
Regards,
Suresh

Hai
See Cash journal is a seperate interface..
You should have posted this cash in hand 1000 rs thru cash journal itself as reciept business transaction u are getting error bcz if u see ur opening balance it will be zero thats why system is giving amount is higher.
So again post cash in hand account 1000 rs in recirpts business transaction.
Before to that u have to create a business transaction with cas in hand gl account.
Regards
Raghavendra.M
SAP-Practice

FBCJ Cash Payment Process error

Dear Experts,
I am processing Cash Payment ( for Rs 10) using transaction code is FBCJ so at the time of processing transaction i am getting below error ,
Payment amount is larger than cash on hand. Change amount
Message no. F5A055
Diagnosis
The amount you want to pay out exceeds the available amount in the cash box.
Other info,
Sufficient cash balance is available ( Rs 20000) in cash book even though i am getting this error
Please find screen shot for the same.
Regards
mohamed

hello,
I am not sure but, this might help:
F5A055: Payment amount is larger than cash on hand. Change amount
all the best
Erwin

SAP RE-FX RERAPP - making Object Cash Flow posting while Partn.Rel. Cash flow gives Error (due to missing House Bank)

Hello Experts,
We have an issue with the Object Cash Flow makes postings while the Partner.Rel. Cash Flow gives an error due to missing House Bank in the Posting Parameters on the contract.
Result is an double/tripple etc. booking on the Object Cash Flow which not is showing on the Flow Overview in the contract and no booking on the Partner.Rel. Cash Flow.
This goes on until the missing House Bank is corrected.
We want to know if we can block the Object Cash Flow making definitive postings until the original Partner.Rel. Cash Flow is posted.
Hope to hear from you, thanks in advance!
Saskia Ismail

Hi.Saskia Ismail
You can think the 2-Type of posting procedure.
1. You just only manage 'Partner.Rel. Cash flow' of each condition & flow type.
    In this cases, you do not configure "Distribution Formula" on the "Condition type" configuration.
   (RECACUST>Conditions and Flows>Condition Types and Condition Groups)
2. You want to manage both of 'Partner.Rel. Cash flow' and 'Object Cash Flow'. but when you posting this cash flow, if you want to block the Object
   Cash Flow making, you can use 'Enhancements' of the 'RECACUST>Accounting>Automatically Generated Accounting
   Documents>Enhancements>Prevent Object Transfers' as below.
Prevent Object Transfers :
- You can use this BAdI if you want to suppress object transfers (transfer from the contract to assigned rental objects) during periodic posting.
- Implement the method SUPPRESS_TRANSFER_POSTING and set the parameter cf_suppress_transfer there to 'X'.
Regards,
Yeong Chul, Jeong

New VPN3005 Concentrator - Authorization Error

If you have solved the following issue before then kindly give me a clue:
The VPN3005 has only been used a few times in the test lab, when suddenly it begins to refuse any attempts to make config changes - both CLI and Web. It also outputs the following message:
ERROR:-- Authorization Error
ERROR:-- The SET Failed.
I have deleted all config files and rebooted but I can't even enter initial configs because the fault still exists.

Please ignore. I've resolved the issue by myself using password recovery.
http://www.cisco.com/en/US/products/hw/vpndevc/ps2284/products_password_recovery09186a008009434f.shtml#topic1

Petty cash transaction posting error

Dear Expert
At the time of posting the transaction in fbcj i m getting the error message no.F5A244 Document save was unsuccessful; try again .
Earliest help is needed.
Thanks - VG.

Hi Guys , I am also getting the same problem In ECC6,SAP Note 49445 caters only for SAP 4.6C, can you please let me know the latest note number
viral guruji , please let us know if U solve the problem by other means
SK

BP Cash Bank licence error

Hi,
When logging into SAP one user has the following message each log in.
BP_ CashBank
Connection with license server failed
The Payment engine is automatically conencted for this user.
thanks Lisa

Lisa,
Are there any addons being used that require their own license server?
If not, are they able to log in and use B1 at all?
The connection to the license server, is it the Server Name or the server IP address?
regards,
Lucas

IHC - Incoming Bank Statement

Hi Gurus,
When you import a Electronic Bank statement and you want some of the bank statement items to post to a current account in In-House cash, how will you instruct the system to do so? Is there any Algorithm which should be assigned to the Posting rule or is there any configuration setting in IHC?
I am familiar with EBS but new to In-House cash module. Please advise.
Thanks
Kalyan.

Hi Kumar,
1. How many IHC current accounts are suggested to configure when a subsidiary makes payment in many currencies?
In my opinion, it would depend on how IHC company and subsidiary are reconciled and in which currency. For example, if they are to be reconciled in EUR, it would only make sense that Current account to be maintained in EUR so that IHC has the correct balance.
2. Shall we use same clearing account( IHC clearing account, PT clearing account) used in centralized external payment process for payments in many currencies?
I would imagine you could have the clearing accounts for all the currencies that IHC has the external accounts with external banks - currencies that they hold so that you would have the visibility of clearing balance in IHC and its exchange rate impact in FI at the time of GL transfer with PQ clearing accounts.
3. IHC calculates transactional charge per transaction and post payment item automatically based on configurations. We want to calculate transactional charge, but on monthly basis. How it can be achieved
You may elaborate this. Are we referring to fix charge monthly from IHC to subsidiary if not calculated per transaction?
2. If we wish to transfer balance from all currencies to one current account, How it can be achieved? IHC cash concentration allow us to create heirerchy for accounts in same currency only
Indeed, cash concentration works only in the same currency, which would make sense anyway. what about using the manual payment order with internal transaction type? Even though manual payment order (credit/debit), you would need to use on currency, you may be able to transfer between 2 current accounts.
3. How can we cater to foreign exchange gain/loss using IHC?
As far as I know, you have some choices depending on who would be accountable for the exchange gain/loss. If it is IHC, you would simply use Final payment order from IHC and the real gain/loss would be posted by way of uploading Bank statements from external banks, while it is subsidiaries accountable for that, you look to the Provisional Payment process from IHC, create different exchange rate type for the Actual exchange rate from banks, process final posting in IHC0, which will reflect the real exchange gain/loss to subsidiary by way of FINSTA bankstatements
Hope that this helps
taro

*FBCJ - CASH JOURNAL POSTING - ABAP RUN TIME ERROR*.

Hai,
My problem is, while FBCJ cash journal posting, Error message comes as Programme terminated, short dump is beeing formatted. The screen is quitting out to ABAP RUN TIME ERRORS. Short text of error message- For object, CAJO_DOC2 101, numer range interval 01 does not exist.( I have given the number range, but result is same.) - Pls advice, document type for cash journal is DZ ?.expecting valued support- Iam working on SAP R/3 4.7 enterprise.- TITUS GEORGE.

Hi,
GOto SNUM, Input CAJO_DOC2...
Click on change and click on document number ranges.
Maintain the document number ranges for your company code..
That should solve the problem.
Good Luck
Cheers,
Redoxcube

IHC Cash Concentration F9H4 Error

Similar Messages

Maybe you are looking for