IIS7-Internet Explorer cannot display website
I hosted my website on my local webserver (Window Server 2008), and when I run it on
iE8 & iE11 the website doesn't look good, my navigation bar brakes, and my image slider breaks too. It is not a browser
issue because, I have hosted the same website on the Goddady servers, and it works fine with
iE8&iE11.
And also on when I try to run it on the google chrome it works fine, but on the Internet Explorer comes out with that problem. Do you guys think is a problem with my IIS on my Server? Any help/suggestion/advice I would really appreciate it.
They'll help you over here.
http://forums.iis.net/
for website dev issues over here.
http://forums.asp.net/
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
Similar Messages
-
Safari is running strangely on my new MacBook Pro. It has decided to NOT automatically add .com
when I type an address ..... THEN, when it can't find the website I get the message
"Internet Explorer Cannot Display the Web Site". ***.
Could the IE I am using when I'm using Windows XP (via Bootcamp) have corrupted Safari somehow?
Ideas, please! Thanks.I found that the DNS settings in system prefs> networks > advanced had been mysteriously changed to something rather "foreign". An archive and Install solved the problem. Did your client happen to install a program called "Glim" (a Safari "enhancer"). That's our suspect.
-
Reporting IAC - Internet Explorer cannot display the webpage error
Hello
We are working on ECC 6, EHP 3, MSS Reports using LaunchPad.
When we try to see the report results, it gives us following error at below URL:
http://domain.com:50000/irj/servlet/prt/portal/prteventname/navigate/prtroot/pcd!3aportal_content!2fevery_user!2fgeneral!2fdefaultDesktop!2fframeworkPages!2fframeworkpage!2fcom.sap.portal.innerpage!2fcom.sap.portal.contentarea?NavigationTarget=ROLES%3A%2F%2Fportal_content%2Fcom.sap.pct%2Fline_manager%2Fcom.sap.pct.erp.mss.bp_folder%2Fcom.sap.pct.erp.mss.roles%2Fcom.sap.pct.erp.mss.manager_self_service%2Fcom.sap.pct.mss.hcm.rpt.iac&ApplicationParameter=S%3DMSS0%26F%3D*HISRETQTA++5%26B%3D20100329%26E%3D20100329%26V%5B1%5D%3DMSS_RPT_SEL_PD1%26OV%3DMSS_RPT_SEL_PD%26R%3D4365AF4B40472508E10000000A000326&CurrentWindowId=WID1269788098656&NavMode=1
Internet Explorer cannot display the webpage
Most likely causes:
You are not connected to the Internet.
The website is encountering problems.
There might be a typing error in the address.
- I am connected to Net very well.
- Not sure abt website problems
- address shown in the address bar is mentioned above
Any idea what is wrong? We were earlier getting IAC exception, and added the permissions to overcome it.
Reagrds
YashHI Yash,
Please follow this link http://help.sap.com/saphelp_erp2004/helpdata/en/0c/c28c4024d26e1de10000000a1550b0/frameset.htm.
It will solve your problem. Also make sure that you will give READ access to the end user on this folder.
In case you are still facing with issue, do let us know.
Cheers,
AB -
WRT300N v1 Internet Explorer cannot display the webpage
An intermittent problem occurs where occasionally during browsing the web I'll get an Internet Explorer "cannot display the webpage" and then I reload the page and often it works on the reload. The problem is very frequent and so nearly every webpage I try to open I have to reload in order to access it.
A temporary fix is unplugging the WRT300N v1 and plugging it back in. For a while, it works fine, but eventually the problem creeps up again.
I have firmware v 1.03.3
I've got two laptops, one Mac running OS 10.x and one Dell running Vista. I also have a desktop PC running XP. The two laptops use the wireless connection. The PC uses a wired connection. All 3 computers experience this same problem browsing web pages.
I've read the forums and mostly I've seen people talking about problems with the WRT300N v1 as far as the wireless connection, but this time I'm having issues even with the wired connection, so I feel that this issue isn't addressed, or at least I haven't found where it was addressed.
How do I fix this issue permanently?I too am having the same problem. I used another system with IE7 installed and found that many sites that were "unable to be displayed" were accessed with IE7 on a differant computer system running Windows XP.
I realize it could be a router thing as well....but after i went through all the tech help i could find online it still did not solve the problem. I decided to work it out myself.
I found my solution when trying to go to sites with mp3 files on them. Thats when i discovered that with Windows Vista I had to manually select what program applications would be used to perform IE7 features (webpage content) in order for the pages to load properly.
To do this in Windows Vista - just go to Start / Program Defaults / Set Program Access and defaults From there you can select which programs to open if IE7 cant handle the file extention on its on. That was my problem all along.
You may have to go as far as setting your file associations in Windows Explorer. Windows Vista had set the file extension .php to open with Windows Photo Gallery.
I am still going through all the file types and finding file extentions that are configured wrong within Windows Vista.
UPDATE: I had problems opening webpages from links from online searches that were within various forums and also on websites that required a login but popup a separate window to login to. I don't know if you have the same problem with these sites.
I uninstalled a Windows Update (kb927143) and can now access those. I know this could be risky but I still have my firewall and antivirus running. Until IE7 is fixed its the only choice I have.
To do this in Vista....go to Control Panel ... Programs and Features...then click view installed updates. You will find it there if you have it installed. From there you can uninstall it.
Hope this helps you to solve your problem.
Message Edited by nannahawktx on 08-27-2007 09:02 PM -
I did have a previous version of Itunes and Quicktime that I used the control panel Uninstall to remove. When I do the download, I get a small window in the upper left saying Internet Explorer Cannot Display Webpage. It is trying to get to ....itunes64setup. I did check to see that all old Apple directorories, etc have been delete. Help!
Okay. Let's see if you've acquired some kind of restriction for the download site. These settings checks/changes apply to the IE downloads, so we'll be trying to use IE again.
Head into your Internet Options control panel, and click the Security tab. Click Restricted Sites.
Check to see if the following website is listed as a restricted site:
appldnld.apple.com.edgesuite.net
If it is, remove it from your list of restricted sites and try another download.
If still no joy, head back into the security tab of the Internet Options control panel. Click Trusted Sites this time. Click the "Sites" button.
Add appldnld.apple.com.edgesuite.net as a trusted site. Uncheck the "Require server verification" box. Now click OK and try another download. -
IE browser and Web Cache and SSL - Internet Explorer cannot display the web page
When using IE8, IE9, or IE10 with Web Cache and SSL certain pages which display a lot of data returns the error - "Internet Explorer cannot display the web page."
if we eliminate SSL but continue to use Web Cache, the error does *not* reproduce & If we eliminate Web Cache altogether the error again does *not* reproduce. The error is only reproducible when we use SSL with Web Cache and if we use IE and we access *large* pages. The error is not reproducible with Firefox or Chrome. This is a Web Tier 11.1.1.7 installation with WebLogic 10.3.6 & Red Hat Enterprise 5 Linux x86-64
Event_log shows below errors.
[2013-06-13T16:34:35-04:00] [webcache] [NOTIFICATION:1] [WXE-09002] [logging] [ecid: ] Generated by Oracle Web Cache on Thu Jun 13 16:34:35 2013 - Build 11.1.1.7.0 130113.0721
[2013-06-13T16:34:36-04:00] [webcache] [NOTIFICATION:1] [WXE-08513] [logging] [ecid: ] Cache server process ID 4469 is starting up.
[2013-06-13T16:34:36-04:00] [webcache] [NOTIFICATION:1] [WXE-09612] [main] [ecid: ] Oracle Web Cache 11g (11.1.1.6), Build 11.1.1.7.0 130113.0721
[2013-06-13T16:34:37-04:00] [webcache] [NOTIFICATION:1] [WXE-13002] [config] [ecid: ] Maximum allowed incoming connections are 1000
[2013-06-13T16:35:00-04:00] [webcache] [NOTIFICATION:1] [WXE-09441] [stats] [ecid: ] DMS enabled
[2013-06-13T16:35:28-04:00] [webcache] [NOTIFICATION:1] [WXE-12209] [cluster] [ecid: ] A 1 node cluster successfully initialized
[2013-06-13T16:35:29-04:00] [webcache] [NOTIFICATION:1] [WXE-09614] [main] [ecid: ] The following Oracle Web Cache internal files are pre-populated to the cache: [[
/nssb-p.adm.fit.edu:7785/_oracle_http_server_webcache_static_.html
/nssb-p.adm.fit.edu:4448/_oracle_http_server_webcache_static_.html
[2013-06-13T16:35:29-04:00] [webcache] [NOTIFICATION:1] [WXE-09614] [main] [ecid: ] [[
The following Oracle Web Cache internal files are pre-populated to the cache: [[
/nssb-p.adm.fit.edu:7785/_oracle_http_server_webcache_checkserviceavailability_.html
/nssb-p.adm.fit.edu:4448/_oracle_http_server_webcache_checkserviceavailability_.html
[2013-06-13T16:35:29-04:00] [webcache] [NOTIFICATION:1] [WXE-09608] [main] [ecid: ] The cache server process started successfully.
[2013-06-13T16:35:29-04:00] [webcache] [WARNING:1] [WXE-12104] [utl] [ecid: ] Oracle Web Cache process has page faulted
[2013-06-13T16:44:22-04:00] [webcache] [ERROR:32] [WXE-11904] [security] [ecid: ] SSL handshake fails SSL-29049
[2013-06-13T16:44:22-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: The record type is unknown.
[2013-06-13T16:44:22-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: Remote IP [163.118.22.16]:55145
[2013-06-13T16:44:22-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: Local IP 163.118.170.70:4448
[2013-06-13T16:44:22-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: SSL error during handshake (details: internal=The record type is unknown. system=Success)
[2013-06-13T16:44:27-04:00] [webcache] [ERROR:32] [WXE-11904] [security] [ecid: ] SSL handshake fails SSL-29049
[2013-06-13T16:44:27-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: The record type is unknown.
[2013-06-13T16:44:27-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: Remote IP [163.118.22.16]:55144
[2013-06-13T16:44:27-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: Local IP 163.118.170.70:4448
[2013-06-13T16:44:27-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: SSL error during handshake (details: internal=The record type is unknown. system=Success)
[2013-06-13T16:44:27-04:00] [webcache] [ERROR:32] [WXE-11904] [security] [ecid: ] SSL handshake fails SSL-29049
[2013-06-13T16:44:27-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: The record type is unknown.
[2013-06-13T16:44:27-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: Remote IP [163.118.22.16]:55148
[2013-06-13T16:44:27-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: Local IP 163.118.170.70:4448
[2013-06-13T16:44:27-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: SSL error during handshake (details: internal=The record type is unknown. system=Success)
[2013-06-13T16:44:35-04:00] [webcache] [ERROR:32] [WXE-11904] [security] [ecid: ] SSL handshake fails SSL-28864
[2013-06-13T16:44:35-04:00] [webcache] [ERROR:32] [WXE-11904] [security] [ecid: ] SSL handshake fails SSL-28864
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
[2013-06-13T16:45:18-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:45:18-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
[2013-06-13T16:45:22-04:00] [webcache] [ERROR:32] [WXE-11904] [security] [ecid: ] SSL handshake fails SSL-28864
[2013-06-13T16:45:22-04:00] [webcache] [ERROR:32] [WXE-11904] [security] [ecid: ] SSL handshake fails SSL-28864
[2013-06-13T16:45:38-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:45:38-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
[2013-06-13T16:45:38-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:45:38-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
[2013-06-13T16:45:38-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:45:38-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
[2013-06-13T16:45:38-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:45:38-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
[2013-06-13T16:45:41-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:45:41-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
Any help or suggestions are greatly appreciated
Tnx a lot,
LokeshHello ,
Try Below Workarounds:
Workaround 1:
Open Central Admin
àApplication Management à
Configure Alternate access mapping-->Edit your web application zone and add your server name in Intranet zone. So default can be serverIP and intranet could be servername.
Workaround 2:
Might be there is some issue with DNS and try to check that WebApplication is pointing to correct IP or not.
Also try to access your Sharepoint site using ip Address .. If you still gets error Kindly share the logs ..
Best
Regards Kuldeep Verma
Please remember to click "Mark As Answer"
if a post solves your problem or "Vote As Helpful" if it was useful. -
Internet Explorer cannot display the webpage error urgent!
Hi,
I have created a OAF page. am displaying some report data in the page. The VO query is executing more thatn 20 min to get the records after tuning.
Now my problem is, am getting the error "Internet Explorer cannot display the webpage" in 10 mins after the VO query execution started. However, the DB session for this query is still executing at the backend and I am unable to get the same OAF page until the DB session completes.
Could you please help me in this?
Thanks,
Raja.Raja,
There are two options here :
1) The correct one is to go via concurrent program , because as per web standards a web page should not take max of 3-4 minutes to render.
2) If you still wanna go via your present approach, you need to set profile ICX:Session Timeout which specifies Maximum idle time for the Oracle Applications user session(specified in minutes).
--Mukul -
ACE 4710 - Internet Explorer cannot display the webpage randomly
We have a ACE 4710 with a basic config, (see below).
When clicking on a tab from a window within Interent explorer we occasionally get an issue with it returning: "Internet Explorer cannot display the webpage" The details show "Access is denied" accessing a particular line of a javascript file.
We have put one web server out of service in the farm to make sure that this isn't a result of stickyness not quite working.
We have tested extensively by going directly to the web server directly without the load balancer and cannot reproduce the problem but we can produce the issue within a few minutes when going to the load balanced address.
Thanks in advance for any advice.
HOST-1/Admin# show run
Generating configuration....
logging enable
logging fastpath
logging standby
logging timestamp
logging trap 6
logging history 6
resource-class SLB_ResourceClass_T_R
limit-resource all minimum 10.00 maximum unlimited
resource-class sticky
limit-resource all minimum 10.00 maximum unlimited
boot system image:c4710ace-t1k9-mz.A5_1_2.bin
peer hostname HOST-2
hostname HOST-1
interface gigabitEthernet 1/1
switchport access vlan 1000
no shutdown
interface gigabitEthernet 1/2
shutdown
interface gigabitEthernet 1/3
description LB003
switchport access vlan 1
shutdown
interface gigabitEthernet 1/4
description LB004
switchport access vlan 2
shutdown
interface port-channel 1
port-channel load-balance src-dst-port
no shutdown
clock timezone standard GMT
switch-mode
context Admin
description SUTLB01
member SLB_ResourceClass_T_R
access-list ALL line 8 extended permit ip any any
access-list ALL line 16 extended permit icmp any any
access-list everyone line 8 extended permit ip any any
access-list everyone line 16 extended permit icmp any any
probe tcp probe_tcp_80
port 80
rserver host Server_S_W301
description Server_S_W301
ip address x.x.32.152
inservice
rserver host Server_S_W302
description Server_S_W302
ip address x.x.32.154
inservice
serverfarm host sfarm_T_R
description sfarm_T_R
predictor leastconns
probe probe_tcp_80
rserver Server_S_W301 80
rserver Server_S_W302 80
inservice
sticky http-cookie Cookie1 T_R_sticky_cookie
cookie insert browser-expire
timeout 3600
serverfarm sfarm_T_R
class-map match-any T_R_L4Class
2 match virtual-address x.x.33.150 tcp eq www
class-map type management match-any remote_access
2 match protocol xml-https any
3 match protocol icmp any
4 match protocol telnet any
5 match protocol ssh any
6 match protocol http any
7 match protocol https any
8 match protocol snmp any
policy-map type management first-match remote_mgmt_allow_policy
class remote_access
permit
policy-map type loadbalance first-match T_R_L7policy
class class-default
sticky-serverfarm T_R_sticky_cookie
policy-map multi-match T_R_L4Policy
class T_R_L4Class
loadbalance vip inservice
loadbalance policy T_R_L7policy
loadbalance vip icmp-reply active
nat dynamic 2 vlan 1000
interface vlan 1000
ip address x.x.33.148 255.255.254.0
access-group input ALL
nat-pool 2 x.x.33.151 x.x.33.151 netmask 255.255.254.0 pat
service-policy input remote_mgmt_allow_policy
service-policy input T_R_L4Policy
no shutdown
ip route 0.0.0.0 0.0.0.0 x.x.32.1
ssh key rsa 1024 force+------------------------------------------+
+-------------- HTTP statistics -----------+
+------------------------------------------+
LB parse result msgs sent : 421347 , TCP data msgs sent : 2099597
Inspect parse result msgs : 0 , SSL data msgs sent : 0
sent
TCP fin msgs sent : 6169 , TCP rst msgs sent: : 769
Bounced fin msgs sent : 5 , Bounced rst msgs sent: : 1
SSL fin msgs sent : 0 , SSL rst msgs sent: : 0
Drain msgs sent : 337811 , Particles read : 5040829
Reuse msgs sent : 0 , HTTP requests : 342499
Reproxied requests : 183422 , Headers removed : 37475
Headers inserted : 342124 , HTTP redirects : 0
HTTP chunks : 224859 , Pipelined requests : 71466
HTTP unproxy conns : 267246 , Pipeline flushes : 0
Whitespace appends : 0 , Second pass parsing : 0
Response entries recycled : 71302 , Analysis errors : 0
Header insert errors : 22 , Max parselen errors : 215
Static parse errors : 99 , Resource errors : 0
Invalid path errors : 0 , Bad HTTP version errors : 0
Headers rewritten : 0 , Header rewrite errors : 0
SSL headers inserted : 0 , SSL header insert errors : 0
SSL spoof headers deleted : 0 , Unproxy msgs sent : 267246
HTTP passthrough stat : 0
NOTE - We did turn on caching at one point to try and resolve the issue but it has since been turned off -
ISQLPLUS : Internet Explorer cannot display the webpage
Hi,
on 10g R2 on Win 2003 server when I (being logged as sysman) click on iSQLPLUS link on DB control, and give agreement to display in http and not https I receive :
Internet Explorer cannot display the webpageisqlplus Windows service is running and I have started iSQLPLUS :
E:\oracle\product\10.2.0\db_1\BIN>isqlplusctl start
iSQL*Plus 10.2.0.4.0
Copyright (c) 2003, 2007, Oracle. All Rights Reserved.
Starting iSQL*Plus ...
iSQL*Plus started.Any idea ?
Thanks.Pl see if MOS Doc 300547.1 (Troubleshooting Guide for iSQL*Plus issues) can help
HTH
Srini -
Periodic Internet Explorer cannot display the webpage
while navigating in Apex users occasionally (and more frequently now) are getting "Internet Explorer cannot display the webpage" errors. if they click on refresh or back then click again it works.
i cannot find any errors in any log files that give me any indication why this is happening.
any help is appreciated.
using
Oracle Application Server 10g Release 2 (10.1.2)
and
Application Express 4.0.1.00.03
with
Oracle Database 10.2.0
on
Linux spedb01.spep.com 2.6.9-89.0.26.ELhugemem #1 SMP Sun May 30 09:43:09 EDT 2010 i686 i686 i386 GNU/Linux
Edited by: user12021582 on Dec 20, 2010 3:42 PMHave not heard of this one. Would consider setting IE "Delete browser history on exit" if you have not already. And setting "Check for newer versions of stored pages" to every time I visit the webpage.
-
Hi all,
DB:11.2.0.3.0
EBS:12.1.3
O/S:Solaris SPARC 64 bits
I.E Browser: 9.0
Problem Description
Cloned target database TEST1 from source database TEST2 RMAN full backup. But on accessing https url EBS R12.1.3 leads to "Internet Explorer cannot display the webpage"?
Autoconfig completes successfully on both DB and Apps Tier and have also ran ojspcompile but still the same issue.
$ perl ojspCompile.pl --compile --flush -p 2
logfile set: /t000/test1/inst/apps/TEST1_Hostname/logs/appl/rgf/ojsp/ojsp
starting...(compiling all)
using 10i internal ojsp ver: 10
synchronizing dependency file:
loading deplist...8095
enumerating jsps...8095
updating dependency...0
initializing compilation:
eliminating children...6024 (-2071)
translating and compiling:
translating jsps...6024/6024 in 7m50s
compiling jsps...6024/6024 in 35m17s
Finished!
Bounced the services there after still the same issue. Could anyone please share the fix if encountered such an issue before.
Thanks for your time,
user10088255Apache logs have the below entry:
[Sun Oct 27 02:30:11 2013] [notice] configured -- resuming normal operations
[Sun Oct 27 02:30:11 2013] [notice] Accept mutex: fcntl (Default: fcntl)
[Sun Oct 27 03:03:02 2013] [notice] configured -- resuming normal operations
[Sun Oct 27 03:03:02 2013] [notice] Accept mutex: fcntl (Default: fcntl)
[Sun Oct 27 04:04:59 2013] [notice] configured -- resuming normal operations
[Sun Oct 27 04:04:59 2013] [notice] Accept mutex: fcntl (Default: fcntl)
[Sun Oct 27 04:29:54 2013] [notice] configured -- resuming normal operations
[Sun Oct 27 04:29:54 2013] [notice] Accept mutex: fcntl (Default: fcntl) -
Content Coding Error in Firefox/Internet Explorer cannot display webpage
I can log into Beehive without any issues. I used to be able to go to Workspaces > All My Workspaces and see all the workspaces I had access to. From this list, I could get to any of these workspaces. Now when I go to the same navigation, I get in 'Content Coding Error' in Firefox 9 and 'Internet Explorer cannot display webpage' in Internet Explorer 7.
If I find an email that invited me to a specific workspace, I can access that workspace only. I cannot find a way to access all workspaces I have access to within Beehive.
Please let me know what other information I need to provide for assistance.
Thanks!Hi,
https://beehiveonline.oracle.com/index.html is a public page with no obvious protection so anyone should be able to see it without any difficulty. If this is the page causing the issue then it suggests a local browser issue.
If you are getting this after logging into https://beehiveonline.oracle.com/teamcollab then it means your account is not provisioned correctly. Contact us out of the forum with your details and we can check out if we have a provisioning issue. I would need your email address and any group you have been invited to be a member of - send it to [email protected]
Phil -
Export to Excel Fails with "Internet Explorer cannot display the webpage"
We have a couple of report servers all hosted internally on VMs. They are all SSRS 2008 R2.
For all of these, when viewing the reports remotely in IE, they run fine. However when we try to export them to excel, a new tab opens in IE, but the tab just displays with "Internet Explorer cannot display the webpage"
There are no other errors and it never progresses to save or open.
THE SSRS log files dont contain any errors either so i dont think its a resource issue, but they do say steam=''
library!ReportServer_0-1!11cc!03/11/2014-08:49:24:: i INFO: RenderForNewSession('/ReportsMain/Test/Production Report')
webserver!ReportServer_0-1!11cc!03/11/2014-08:49:27:: i INFO: Processed report. Report='/ReportsMain/Test/Production Report', Stream=''
library!ReportServer_0-1!11d4!03/11/2014-08:49:31:: i INFO: RenderFromSession('/ReportsMain/Test/Production Report')
webserver!ReportServer_0-1!11d4!03/11/2014-08:49:31:: i INFO: Processed report. Report='/ReportsMain/Test/Production Report', Stream=''
library!ReportServer_0-1!7a0!03/11/2014-08:49:44:: i INFO: RenderFromSession('/ReportsMain/Test/Production Report')
webserver!ReportServer_0-1!7a0!03/11/2014-08:49:45:: i INFO: Processed report. Report='/ReportsMain/Test/Production Report', Stream=''
library!ReportServer_0-1!624!03/11/2014-08:51:05:: i INFO: RenderFromSession('/ReportsMain/Test/Production Report')
webserver!ReportServer_0-1!624!03/11/2014-08:51:05:: i INFO: Processed report. Report='/ReportsMain/Test/Production Report', Stream=''
library!ReportServer_0-1!18d0!03/11/2014-08:51:06:: i INFO: RenderFromSession('/ReportsMain/Test/Production Report')
webserver!ReportServer_0-1!18d0!03/11/2014-08:51:07:: i INFO: Processed report. Report='/ReportsMain/Test/Production Report', Stream=''
library!ReportServer_0-1!7a0!03/11/2014-08:51:34:: i INFO: RenderFromSession('/ReportsMain/Test/Production Report')
webserver!ReportServer_0-1!7a0!03/11/2014-08:51:34:: i INFO: Processed report. Report='/ReportsMain/Test/Production Report', Stream=''
library!ReportServer_0-1!1610!03/11/2014-08:51:38:: i INFO: RenderFromSession('/ReportsMain/Test/Production Report')
webserver!ReportServer_0-1!1610!03/11/2014-08:51:39:: i INFO: Processed report. Report='/ReportsMain/Test/Production Report', Stream=''
library!ReportServer_0-1!624!03/11/2014-08:51:49:: i INFO: RenderFromSession('/ReportsMain/Test/Production Report')
webserver!ReportServer_0-1!624!03/11/2014-08:51:49:: i INFO: Processed report. Report='/ReportsMain/Test/Production Report', Stream=''
library!ReportServer_0-1!11d4!03/11/2014-08:52:14:: i INFO: RenderFromSession('/ReportsMain/Test/Production Report')
webserver!ReportServer_0-1!11d4!03/11/2014-08:52:14:: i INFO: Processed report. Report='/ReportsMain/Test/Production Report', Stream=''
library!WindowsService_0!3c8!03/11/2014-08:52:28:: i INFO: Call to CleanBatch()
library!WindowsService_0!3c8!03/11/2014-08:52:28:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams, 0 segments, 0 segment mappings, 0 edit sessions.
library!WindowsService_0!3c8!03/11/2014-08:52:28:: i INFO: Call to CleanBatch() ends
library!ReportServer_0-1!11cc!03/11/2014-08:55:29:: i INFO: RenderFromSession('/ReportsMain/Test/Production Report')
webserver!ReportServer_0-1!11cc!03/11/2014-08:55:29:: i INFO: Processed report. Report='/ReportsMain/Test/Production Report', Stream=''
Does anyone have any suggestions?Hello,
Since you have motioned that it is work well in IE7 on the VM. We can try to enable the compatibility view of the IE to troubleshooting the issue.
Reference: http://support.microsoft.com/kb/2536204
Based on your description, the issue is just occur when view the report remotely. The issue may relate to Internet Explorer, please refer to the following methods:
Run the Network Diagnostics tool in Internet Explorer.
Reset the modem or the router.
Use the Delete Browsing History feature.
Use the Internet Explorer (No Add-ons) mode.
More detail information, please refer to the similar issue below:
http://answers.microsoft.com/en-us/ie/forum/ie8-windows_other/internet-explorer-cannot-display-the-webpage/c8a0b157-820a-4a14-80f3-806ab51717fa
Hope this helps.
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support -
I keep getting internet explorer cannot display web page when trying to download itunes. This only shows on half the page where the download link would be. My internet connection is fine. Any idea what the problem may be?
You won't see anything obviously related to iCloud, Jimmy. But if you go to the home iTunes Store page while logged into your iTunes Store account, you should see a Purchases link now under the Quick Links header. That's the only part of iCloud active at this time.
Regards. -
Internet Explorer Cannot Display This Webpage
Hi,
My issue is that when ever user is clicking link or submit a form, sometimes instead of directing to a new page, it will show the internet explorer error page 'Internet explorer cannot display this webpage'. I didnt find any error message in the log in cf admin as well as IIS admin. Then I checked with a simple HTML page which refreshes in every 3 minutes. I found that this page is also showing the same issue. So I think the issue is not related to Coldfusion. Still the issue persists. So does anybody have any idea about this? Please advice. Thanks in advance.
The details are: And also the application is hosted in virtual machine.
Server Product
ColdFusion
Version
9,0,0,251028
Edition
Standard
Serial Number
Operating System
Windows 2003
OS Version
5.2
Adobe Driver Version
4.0 (Build 0005)
JVM Details
Java Version
1.6.0_17
Java Vendor
Sun Microsystems Inc.
Java Vendor URL
http://java.sun.com/
Java Home
D:\ColdFusion9\runtime\jre
Java File Encoding
Cp1252
Java Default Locale
en_GB
File Separator
Path Separator
Line Separator
Chr(13)
User Name
SYSTEM
User Home
C:\Documents and Settings\Default User
User Dir
D:\ColdFusion9\runtime\bin
Java VM Specification Version
1.0
Java VM Specification Vendor
Sun Microsystems Inc.
Java VM Specification Name
Java Virtual Machine Specification
Java VM Version
14.3-b01
Java VM Vendor
Sun Microsystems Inc.
Java VM Name
Java HotSpot(TM) 64-Bit Server VM
Java Specification Version
1.6
Java Specification Vendor
Sun Microsystems Inc.
Java Specification Name
Java Platform API Specification
Java Class Version
50.0Seems like an issue with the web server or, perhaps, even your browser. To start with, make sure you have followed the steps for configuring IIS in ColdFusion 9. Next, make sure the MIME type for HTML files in IIS 6 is text/html, not text/htm.
Maybe you are looking for
-
Album artwork display on tv from ipod
Wonder if anyone has been able too, or knows the process too,use the video jukebox and or album cover art from ipod to tv? I have the dock and av cables. Thanks, Greg
-
Do I need multiple Vendor ID and device ID ?
Hi I am developing a Compact PCI/ PXI card. Will I need a different DEVICE ID for each card, so that Labview can recognise between two cards. Is the distinction between two cards having the same vendor ID done on the basis of Device ID's or is it don
-
Adobe Aire will not install?
Adobe Aire will not install? I am new to this site and I have never seen one more difficult to navigate ! Every time I click I get asked to subscribe to something else it seems. What a bunch of hucksters !! Andrew
-
Photoshop CS6 Immediately Freezes
Hello, I'm having issues with the 64-bit version of Photoshop CS6. Immediately after attempting to open an existing file or create a new one, Photoshop completely freezes, with no error messages/dialogues, and I end up having to force close it from W
-
voilà, j'ai un problème de connexion wifi avec mon macbook pro 13 pouces 2012. lorsque je ferme et réouvre le capot de mon macbook et que je le fais sortir de veille, il ne se reconnecte pas automatiquement à ma freebox et donc au réseau. Il faut alo