Ik probeer de logo text van kleur veranderen,na veranderen met fill de onderste tekst (kleine letters)is niet duidelijk

hallo,
ik probeer logo text van kleur veranderen
voorbeeld van logo text is hieronder
Premieroptie.nl                                           (eerste rij letter Grote   = 30pt)
compute reparatier en data recovery service              (tweede rij letter grote=12pt onderste tekst)
nu ik heb geprobeerd eerst png bestand te selecteren en kiezen fill color optie normal    orange kleur dan ik krijg de text op oranje maar er is 1 probleem   wanneer van kleur wordt veranderd de onderste tekst is niet duidelijk ik heb ook geprobeerd als PSD bestand maar de problem blijft hetzelfde .
hoe ik kan de onderste tekst ook duidelijk maken. ik ben pas beginner met photoshop ,ik ben ook lid geworden voor Linda.com maar ik kunde die probleem niet oplossen.
johan

Similar Messages

Probleme with AE/Element 3D Shattered Glass - Mirror Logo Text Reveal

Hi,
Hope you will understand me, i'm french so it's a little bit complicated to speak in english.
My problem is not very hard i think, but i don't find any answer and i'm a beginner in AE & Elements 3D.
I paid 3D Shattered Glass - Mirror Logo Text Reveal and i substitute the logo instead of my logo.
In the original video as you can see, there is not a glass behind the logo. and when i subsitute with my new logo, there is a glass...
I just want to do like the video, have my logo wich set up my logo in the form of glass , not my logo inside a glass...
Hope you understand me and have an answer.
Sincerly

Thanks to you for the answer.
I have scaled my screenshot because there is a size to respect for put it here.
I do what you said to me, open the logo in the folder, and do the same for mine logo.
But there is the same result, i don't know why... I don't know where i can see a solution. I have this template at the beginning. I have done that to modify the logo :
- Open project first
- then go inside of "logo here" com. Remove envato logo and drop your logo or text here.
- Your logo must have an alpha channel for proper work of project. place your logo proportional to center of comp
- After placing logo go inside of "packshot" com. select the layer named "auto traced logo heere" and remove this layer
- select layer comp named 'logo here' and go to the upper menu ''layer/auto trace..". the hit ok. This will create a new auto traced layer
- Select layer named element and bring custom layers/custom text masks. from path layer 1's drop down menu select your newly created "auto traced logo here" layer.
- after these processes please go to the any frame in 8th, 9th second, select layer named "logo overlay" and adjust scale and position of layer to fit front surface of 3D extruded element logo (this stape i've don't understand)
Thanks for helping me..
Rick Gerard wrote:
Please don't scale your screenshot. Try again and maybe there is something we can do to help.
Please select your logo in the Project panel so we can see the image details.
Here's where I would start. Open the template. Open all folders inside the project panel until you find the original logo that came with the project. Right click on that logo and find it in your folder. Open the original logo and check the size and format. Go back to the After Effects Project Panel and right click on the original logo again and select replace footage. Browse to your original logo. All Done....

Why do I keep getting Error 519: Server interface error" - Server interface error "no component returned from creativewidget' Line: 479 - var test = parent.add('statictext', undefined, text) when I try to use pattern fill/scripted patterns. I have unin

Why do I keep getting Error 519: Server interface error" - Server interface error "no component returned from creativewidget' Line: 479 -> var test = parent.add('statictext', undefined, text) when I try to use pattern fill/scripted patterns. I have uninstalled and re-installed PS CC. I have opened holding down shift to disable third party plug-ins. I have moved 3rd party plugins to a temp location outside of ps and it still doesn't help. It worked once, and only once and now won't work at all.

Unless your Photoshop question has to do with a download/install error, you should ask in Photoshop General Discussion
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

Cannot boot computer past apple logo, text is displayed saying aDebugger called panic ?

Hello
I have been having issues booting up an iMac computer, it doesn't get past the apple logo before prodcuing text and a greyed out screen that refers to 'Panics', 'double Panics', kernal traps, deBuggers?
Not sure where to even begin really.
It does the same when I try to boot in safe mode.
Any ideas, can some one show me where to begin?
cheers
Matthew Trott

Post the last KP report. Step one is to boot into safe mode (restart holding down SHIFT key). Also, See
Technical Note TN2063: Understanding and Debugging Kernel Panics,
Mac OS X Kernel Panic FAQ,
Resolving Kernel Panics,
How to troubleshoot a kernel panic,
Troubleshooting Mac OS X Kernel Panics, and
Tutorial: Avoiding and eliminating Kernel panics for more details.

Applying GradientPaint to logo text in an Applet

Hello everyone!
I'm trying to come up with a pleasing text appearance in an applet's logo title I'm working on. I'm wondering if there's an easy way to apply a gradient to text (with a larger font, of course). And while I'm at it, does anyone have any interesting appearance ideas to apply to text for something like my current project. Thanks!

I'm wondering if there's an easy way to apply a gradient to textSure thing. See my [_Visual Font Designer_|http://tips4java.wordpress.com/2008/11/30/visual-font-designer/] for the approach using a Font created using a Map of TextAttribute.
db

Blurry Logos/Text

Finishing up a project and messed up on some chapter markers (entered them in the clips). Corrected that, but now our text and logos come in blurry. We even went to another project and cut and pasted the "Clear" Logo+type, but in the new project it looks horrible. Also, when we imported the logo, it came in Extra large and we had to scale it down. Why is it doing this? Probably a simple fix, but can't seem to figure it out!

What version are you using? The current version has a user preference that defaults to scaling anything put in a sequence to fit that sequence. So if you put a small logo in the sequence it scales it up. You can switch this off in the prefs Editing panel. Then the image will go into the sequence at whatever size it is.

Dynamic logo ,text in smartforms

hi there!
as per my requirement they got 4 types of logos.
they wanted to display those dynamically. plz gyide me.
if possible also update me regarding dynamic texts too.
thx in adv

Hi
You can upload those 4 different logos into SAP through trxn <b>SE78</b>.
And based on your conditions, you can select the required logo to print.
Regards,
Raj

Classic logo text effect

I'm not sure exactly what you call this text effect, but it is a surefire method of generating a classic 3D text effect. I'm trying to find a tutorial, but can only find cheesy "3D" effects with lots of glows and the like to give a glassy look.
Is it just a matter of copying and pasting the font in place, then enlarging so that you alternate a colored font fill, light fill, then colored again? Or is there another, better method. Readability is paramount since this is for a logo.
Vintage Graphic Element For Thai Menu On Grunge Old Paper Stock Vector 175155623 : Shutterstock

Like John said: all on one text object. Like this: The bottom word is before, the Appearance Panel is the the top one. With Type selected, use Add New Stroke twice. Change color and weight as needed, then drag them (in the panel) to below Characters.

I have Windows 7 and Firefox 3.6.1, when I am typing text such as email when I hit the shift key and certain letters it activates the shortcut keys and is very annoying how do I get this to stop?

This has happened multiple times. While typing email and also in forums. This is a new computer with Windows 7 so not sure if problem is something in Windows or with Firefox. Sometimes when I hit Shift and t a new tab will open, or shift and w will cause a pop up to come asking if I want to navigate away from this window. I have had other things pop up as well but not sure what they were or what keys I hit that caused them to show up. It tends to happen as I am typing faster. But when this happens, such as the shift t thing, I will close the tab and go back to what I was typing. Watching carefully that i am not hitting the ctrl key I hit shift t and the new tab will pop up again. The only way to get this to stop is to hit the esc key then I am able to to type fine again until it starts again. Once I was typing and my entire text highlighted and disappeared and I lost everything, so yes it can be extremely annoying. Hopefully someone can help me to solve this problem.

Yes, I have rebooted the computer several times. Logged off for the night and login this morning.
It still is happening.
It happens when I type a message in yahoo; when I login to yahoo, both trading platforms and several other applications.
After a while it stops - don't know if there is a key I strike that deactivates what every it is that is making the the keys perform the shortcut function. Sometimes by hitting ESC more than 4 times but less than 10 seems to stop it (or so it appears as the next time I type a msg in Yahoo mail the keys don't activate the toolbar "edit" function. Sometimes striking the backspace key over and over again when there is nothing to delete appears to stop it from happening.
Anymore suggestions? Greatly appreciated. Tired of retyping 3 or more times. Have gotten to the point where I type in word or notepad and paste my username and password into the appropriate areas or into the message area.
Will capture image next time.

How do I get multiple lines to print for a blank text field so that it can be filled in by hand?

I have to design forms that are fillable electronically and by hand. The problem that I am running in to is supplying multiple lines that will print for people that are hand filling the form. I have tried to add an image of lines behind the text field, but these would get in the way when the form was filled in electronically.
I am using LiveCycle Designer ES2 v. 9.0 on a Windows machine.
Thanks.

Ok.
Take a textfield
Go to Object | Allow multiple lines
Go to Layout | Height | activate "Expand to fit"
Go to the initialize-Event or readyform (You have to change the _ for your textfield)     this.rawValue = "___________\n___________\n___________";
Go to the enter-Event   this.rawValue = null;
Go to the exit-Event
          if(this.rawValue == null)
                this.rawValue = "___________\n___________\n___________";
          }else{}
With this solution you can simulate the same as pattern see above.
I hope this is helpfull for you,
Mandy

Is there a way to have type in a text field that would disappear when you filled in the field?

I'm trying to create a form in Acrobat X that has instructions in the text field (like account number) for instance...that would disappear when the customer starts to fill in their number or information? I've seen examples of this but cannot figure out how to make it work.

You can use a custom Format script like:
if (!event.value) event.value = "Instructional text goes here";

Remove a logo from a video clip with content aware fill?

I know you can remove logo in photos using content aware fill, but you can't do it to a video clip. You can only do it to a frame, but you can't apply it to the entire video. I know photoshop is not a video editing software, but having this sort of feature makes sense for photoshop users especially with content aware fill.

I'm a career software architect engineer of 35 years, and I have to side with Howard on this one.
Like Howard, I feel you're thinking about this way too simplistically. Trying to work out what best to fill a part of an image with in 3 dimensions (x, y, and time) and have it look believable almost boggles the mind, especially thinking of a general case (your logo example is far to simplistic in itself). The task is far from a simple looping repeat of what is being done 2 dimensionally on a still frame. Frankly, it's more likely related to what's done with CGI, where scenes are modeled in 3D (4D actually) so certain elements can be replaced believably.
Think about it... If CAF is presently replacing part of an image with something it finds through some heuristics in another part of the image, and the stuff in that part of each frame is changing - and it would, because this is video, not still imagery - then it will select differently every time. What makes you think it would select something that even resembles what it selected for another frame? What you'd end up with is a frame by frame mishmash that would just make the outline of the selection obvious.
Regarding CAF applied to individual frames, then your finding the result isn't coming out as expected in all the frames of the video (e.g., when you're testing this concept) may indicate a problem with the way you're using the tool, or possibly even a bug. You might want to describe step by step what you're doing and show the result you're [not] getting.
-Noel

Bij de eerste twee regels van de voorvertoning in het mailprogramma valt het onderste gedeelte weg!? Wie kan mij helpen? Na installatie Lion

Na installatie van Lion valt bij de nieuwe instelling een gedeelte van de eerste twee regels weg (de onderkant), bij de voorvertoning in het mailprogramma.
Wie kan mij helpen dit te corrigeren?
Opnieuw installeren lukt niet.
mvg. Pim

"Enter the text shown" keeps appearing even though I filled up all of the blanks.

Every time I try making an account on personas , they give me the error : "enter the text shown" but they do not show any text.
I have tried clearing my cookies but it does not help.

You cant delete an Apple ID permanently, you can just stop using it. Your GameCenter is linked to the Apple ID that your phone uses to download stuff. So whatever ID is linked to your phone when you download things from th AppStore and iTunes is also the account that is linked to your GameCenter. if you keep switching accounts thats why the random accounts keep popping up, just stick to one and you should be grand.

Na update van de pc kunnen we niet meer op Iphoto

Hallo.
Na update van de pc kunnen we niet meer op Iphoto en krijgen we de volgende melding: U kunt deze versie van het programma iPhoto.app niet gebruiken met deze versie van OS X. En bij het proberen updaten van Iphoto krijgen we de melding: deze update is voor een app die gedownload is met een andere Apple ID. Log in met die Apple ID en probeer het opnieuw. Blijkbaar werd Iphoto geïnstalleerd met een andere Apple Id, maar we weten niet meer dewelke (nochtans maar 2 mogelijkheden , beide lukt niet) . Waar kan je dat terugvinden? Weet iemand raad?
Alvast hartelijk dank.

Hi, straetmansk
Als je het op de App store gekocht dan kun je deze op elke machne kunt u zich installeren.
Start de App Store app op de tweede machine.
Klik op het tabblad aankopen. U kunt het installeren van daar.
Zoals altijd, een back-up eerst.

Ik probeer de logo text van kleur veranderen,na veranderen met fill de onderste tekst (kleine letters)is niet duidelijk

Similar Messages

Maybe you are looking for