Illustrator CC failure to install

I get the following error when trying to install, can anyone help?:
Exit Code: 7
Please see specific errors below for troubleshooting. For example,  ERROR: DF024 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 1 error(s)
ERROR: DF024: Unable to preserve original file at "/Library/ColorSync/Profiles/Recommended" (Seq 22)

Please run following command on terminal (this will remove the corrupt profiles and should allow you to run the installer successfully) -
sudo mv /Library/ColorSync/Profiles/Recommended /Library/ColorSync/Profiles/Recommended_bkup
Restart your system then try installing again, issue should get resolved.
In case it doesn't worked then rename whole "ColorSync" folder and check again.

Similar Messages

  • Failure to Install Adode Player

    He guys I have been trying to install the Adobe Flash Player
    in the windows xp.When I install from the adobe.com the process
    does not go up to the end. I have tried to download through other
    facilities and install, but when I doubleclick to install the file
    "flashplayer10_install_activex_091508" i get the following error
    messege " failure to install. for troubleshooting tips, please see
    http/:......tn19166".The download box behind this shows "
    Registering : c\windows\system32\macromed\flash\flash10a.ocx". what
    can be the probem? what do I do?. Before that I was just using
    Adobe Leader 8 without player.I have updated to adobe 9.

    I have had the same problem, for a while now. I had Flash
    player running on certain websites, but not on YouTube.com, but
    linked vids on other websites would play. I uninstalled and
    reinstalled like crazy and now, the components in the install won't
    appear in the folder.
    I have done all the "troubleshooting" steps for Windows Vista
    and nothing makes a difference.
    When I try and install, like Papaaa, the message flashes:
    "Failed to install.
    For troubelshooting tips, please see
    http://www.adboe.com/go/tn_19166"
    Behind this window, the install box reads:
    "Registering: C:\Windows\system32\Macromed\Flash\Flash10a.ocx
    (and underneath that, if I push "Show Destails" fast enough,)
    Delete file: C:\Windows\system32\Macromed\Flash\install.log
    Output folder: C:\Windows\system32\Macromed\Flash
    Extract: Flash10a.ocx
    Extract: FlashUtil10a.exe
    Registering: C:\Windows\system32\Macromed\Flash'Flash10a.ocx"
    and if I have the C:\Windows\system32\Macromed\Flash folder
    open, I can see that the appear, but when the failed window goes
    up, they disppear.
    I tried fixing the registry, restarting, even this sites
    suggestion:
    http://www.thetechangel.com/blogberry/2008/10/adobe-flash-player-10-fix-for-vista-xp/"
    but nothing works. Please help!!!

  • MAC Adobe Illustrator CS3 cannot be installed because it conflicts with Adobe Illustrator CS3

    Model Name:iMac / Processor Name:Intel Core 2 Duo / Memory:4 GB
    When I installed Illustrator CS3 at the first time, I didn't complete it and closed it. While I installed it again, it said "Adobe Illustrator CS3 cannot be installed because it conflicts with Adobe Illustrator CS3". I was be stopped on this step, so I deleted the Illustrator CS3 from Applications/Utilities/Adobe Installers without clicking it to uninstall. And I deleted other Illustrator CS3 files. After that, I tried to reinstall Illustrator CS3 again, but it kept to say "Adobe Illustrator CS3 cannot be installed because it conflicts with Adobe Illustrator CS3".
    I cannot find any Illustrator in my MAC. What is wrong? How can I install Illustrator again? Should I format the computer and install all the applications again?

    On the Adobe site probably under support do a search for Adobe CS 3 Clean Up Script.
    Before running the script read the instructions al the instructions first, do not assume you understand from reading the first sentence. There are some files that are not so obvious that are necessary for activation and they are probably still around but they can only be removed by the script.
    Next time you will have to read the instructions.
    The only other ways around this is the do an archival reinstall of your system or if that does not work a complete reinstall of your system. Running the script is the easier and better way to do this but you must read the instructions completely first.

  • Just bought Illustrator and can't install it. Says installed in the pop up thing but it isn't anywhere on my computer or accessible through my web browser. been o hold for half an hour on so called  "Live Chat"

    Just bought Illustrator and can't install it. Says installed in the pop up thing but it isn't anywhere on my computer or accessible through my web browser. been o hold for half an hour on so called  "Live Chat"

    Adobe Customer "Don't Care" have been "assiting other people" for about an hour now and I can't redownload Illustrator either.
    I REALLY dislike Adobe.

  • Illustrator update won't install, even after uninstalling and retrying multiple times.

    Illustrator update won't install, even after uninstalling (using the "Uninstall Adobe Illustrator CS6" app and retrying (using Adobe Application Manager}multiple times. Now I can't open AI CS6 at all.
    The error message I get in Application Manager is:
    "Application could not be found. Restore in case it was trashed/moved to a different volume. Reinstall the application otherwise (U44M1P2B)"
    Help!

    Can you please try installing the Adobe Application Manager from http://www.adobe.com/support/downloads/detail.jsp?ftpID=4774.
    If that doesn't work then the safest course would be to remove all Adobe Creative Software using the uninstallers located in Applications/Utilities/Adobe Installers.  This should then remove the Adobe Application Manager folder also inside Utilities.  Once the software is completely uninstalled and the Adobe Application Manager is removed then you should be able to reinstall from https://creative.adobe.com/.

  • What should I do when I get failure to instal error message?

    what should I do when I get a failure to install error message?

    Could you please provide some more details like Product you are installing,  OS details etc.

  • Failure to install Acrobat X Pro

    I repeatedly tried to install Acrobat X Pro from my Master Collection disc, but it failed. Any advice?
    Really thanks.

    I've just worked several times with your option, but still failed. Even I've already removed Acrobat reader XI. So what's the problem?Thanks.
    Date: Mon, 9 Sep 2013 07:22:47 -0700
    From: [email protected]
    To: [email protected]
    Subject: Failure to install Acrobat X Pro
        Re: Failure to install Acrobat X Pro
        created by Ankit Khurana in Downloading, Installing, Setting Up - View the full discussion
    I hope you are extracting the complete Master collection suite and while installation it gives you an option to choose the products, then choose Acrobat from the list
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5665268#5665268
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5665268#5665268
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5665268#5665268. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • 13.0.1 Illustrator update won't install

    Adobe Updater continually opens and attempts to update my copy of Illustrator with the 13.0.1 updater, but fails each time with a notification that the update cannot be applied to program installed. I have Illustrator 13.0.0 installed on a Mac G5 Dual Processor PPC running OS 10.5.8.
    I have also downloaded the updater DMG and have received the same error message --- that it cannot update the installed program (Illustrator 13.0.0).
    Is this update limited to Intel based machines? Does anyone else have a problem installing this update?
    Thanks.
    Daniel

    The Auto Updater has kicked in twice and failed to install the update 13.0.1, and I have downloaded the DMG directly from Adobe, which has also failed to update my copy of Illustrator. I'm  not sure where else to get the update. I do know that the update was posted on the Adobe site in July 2007 and my OS version updated in August 2009.
    It seems strange as well that the Adobe Updater took nearly 2 years to advise me that an update is available.
    Thanks.

  • Failure to install Illustrator

    Hi,
    Im trying to download a trial version of Illustrator but it failed to install on my windows.
    it says
    "We've encountered the following issues:
    Sorry, there seems to be a problem with the installation process (Error Code: A12E1)"
    HELP!

    Use this methoid and try again:
    Direct Download Links for Adobe Software
    Mylenium

  • Important Updates for Illustrator, Extension Manager, and Photoshop - Failure to Install

    I have been trying to update my Illsutrator, Extension Manager, and Photoshop.
    I have tried about five time using different methods.
    Each time I received the following error message:
    AI CS6 Creative Cloud Update
    Installation failed. Error Code: U44M1P7 
    Adobe Extension Manager CS6
    Update Installation failed. Error Code: U44M1P7 
    Adobe Photoshop 13.0.1.1
    Installation failed. Error Code: U44M1P7
    I need some giudance in order to have the updates installed.
    Thanks
    Paul

    Whilst this may prove to be the only way to install the updates, it reads as though it only takes a few minutes to complete but as others have reported it's a real pain to have to go all through a clean up and then full installation particularly if you have a number of plugins to re-install / activate! Not the best solution and I would have hoped Adobe could have come up with a better solution. As it is I will not be going through the update and will set the application manager to manual rather than have the icon constantly on displayed in the taskbar expecting to update what doesn't work.

  • Cs6 illustrator trail failed to install

    This message pops upwhenever i want to install illustator as part of master collection trial:Exit Code: 6 Please see specific errors and warnings below for troubleshooting. For example,  ERROR: DF015, DW063 ...  -------------------------------------- Summary -------------------------------------- - 0 fatal error(s), 4 error(s), 0 warning(s)  ----------- Payload: {AAF0D225-F129-40F2-916E-12E28DBD19ED} Adobe Illustrator CS6 Core 16.0.0.0 ----------- ERROR: DF015: Unable to delete symlink "/Applications/Adobe Illustrator CS6/Adobe Illustrator.app/Contents/Frameworks/amtlib.framework/Resources"(Seq 2135) ERROR: DW063: Command ARKDeleteSymlinkCommand failed.(Seq 2135) ERROR: DW050: The following payload errors were found during install: ERROR: DW050:  - Adobe Illustrator CS6 Core_AdobeIllustrator16en_USLanguagePack: Install failed ERROR: DW050:  - Adobe Illustrator CS6 Core: Failed due to Language Pack installation failure  
    http://www.adobe.com/go/cs_systemreqs

    Hi,
    Please refer the following KB Docs :
    http://helpx.adobe.com/creative-suite/kb/error-exit-6-exit-7.html
    http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html

  • I'am logged into creative cloud on my account. I by mistake used a trial version of illustrator CC. I installed it afterwards and now it keeps promting me to buy it when I have it already but now cant use it

    I cant open illustrator CC which i have installed as it keeps promting me to buy since i originally used a trial version.
    How do I load the version from my account which I have installed onto my computer from my account, without getting prompting to purchase it? As I have a creative cloud account.

    brettyellow24
    Launch  illustrator CC
    Click on License this software options, then choose Not My Adobe ID.
    Sign in with the email address which you have used to purchase and try.

  • Failure to install SQL Server 2012 SP1 CU8/9 with a "Failed to retrieve data for this request." error

    Hi all,
    Has anyone come across SQL Server 2012 SP1 CU8/9 failing to install with a “Failed to retrieve data for this request.” error.
    The error is too generic for a useful search on web, for me at least anyway.
    Had no problems patching a whole bunch of other servers in the same environment.
    I’m no good at reading these error logs. For some reason the primary replica is referenced in the detailed log???
    The CU8/9 patch has been run by both Domain Admins and local Admin with no luck.
    We are trying to patch a secondary failover replica. (SharePoint 2013 is installed on this server.)
    This is from the summary log:
    Overall summary:
      Final   result:                    The patch installer has failed to update the shared features. To determine   the reason for failure,
    review the log files.
      Exit code   (Decimal):             -2146233088
      Exit facility   code:            19
      Exit error   code:                 5376
      Exit   message:                    Failed to retrieve data for this request.
      Start   time:                      2014-04-10 11:51:11
      End   time:                        2014-04-10 11:51:49
      Requested   action:                Patch
      Exception help link:            
    http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3412.0&EvtType=0xB2652E58%400xDC80C325&EvtType=0xB2652E58%400xDC80C325
    Machine Properties:
      Machine   name:                    VMSPDB2
      Machine processor   count:       4
      OS version:                      Future Windows Version
      OS service   pack:                
      OS   region:                       Australia
      OS   language:                     English (United States)
      OS   architecture:                 x64
      Process   architecture:          64 Bit
      OS   clustered:                    Yes
    Product features discovered:
      Product                Instance               Instance ID                     
    Feature                                    Language              
    Edition                Version         Clustered  Configured
      SQL Server   2012        MSSQLSERVER            MSSQL11.MSSQLSERVER              Database
    Engine Services                   1033                   Enterprise Edition  
    11.1.3000.0     No           Yes      
      SQL Server   2012        MSSQLSERVER          MSSQL11.MSSQLSERVER              SQL Server  
    Replication                     1033                   Enterprise
    Edition     11.1.3000.0       No           Yes      
      SQL Server   2012        MSSQLSERVER            MSSQL11.MSSQLSERVER              Full-Text
    and Semantic Extractions for Search   1033                   Enterprise Edition   11.1.3000.0       No        
    Yes        
      SQL Server   2012        MSSQLSERVER            MSSQL11.MSSQLSERVER              Data
    Quality Services                      1033                  
    Enterprise Edition   11.1.3000.0       No           Yes      
      SQL Server   2012                                                           
    Management   Tools -   Basic                   1033                  
    Enterprise Edition   11.1.3000.0       No           Yes      
      SQL Server   2012                                                           
    Management Tools - Complete                1033                   Enterprise Edition  
    11.1.3000.0       No           Yes      
      SQL Server   2012                                                           
    Client Tools Connectivity                  1033                   Enterprise Edition  
    11.1.3000.0     No           Yes      
      SQL Server   2012                                                           
    SQL Server Data   Tools                      1033                  
    Enterprise Edition   11.1.3000.0       No           Yes      
      SQL Server   2012                                                           
    Integration   Services                       1033                  
    Enterprise Edition   11.1.3000.0       No           Yes      
    Package properties:
        Description:                     Microsoft SQL Server 2012 Service Pack 1
        ProductName:                     SQL Server 2012
        Type:                            RTM
        Version:                         11
        SPLevel:                         1
      KBArticle:                       KB2931078
        KBArticleHyperlink:             
    http://support.microsoft.com/?kbid=2931078
        PatchType:                       QFE
        AssociatedHotfixBuild:         0
        Platform:                        x64
        PatchLevel:                      11.1.3412.0
        ProductVersion:                  11.1.3000.0
        GDRReservedRange:                10.0.1000.0:10.0.1099.0;10.0.3000.0:10.0.3099.0
        PackageName:                     SQLServer2012-KB2931078-x64.exe
      Installation   location:           e:\90a192411a98d1f6dc\x64\setup\
    User Input Settings:
        ACTION:                          Patch
        ALLINSTANCES:                    false
        CLUSTERPASSIVE:                  false
        CONFIGURATIONFILE:              
      ENU:                             false
        HELP:                            false
      IACCEPTSQLSERVERLICENSETERMS:    false
        INDICATEPROGRESS:                false
        INSTANCEID:                      <empty>
        INSTANCENAME:                    <empty>
        QUIET:                           false
        QUIETSIMPLE:                     false
        SQMREPORTING:                    false
        UIMODE:                          Normal
        X86:                             false
    Rules with failures:
    Global rules:
    There are no scenario-specific rules.
    Rules report   file:                 The rule result report file is not available.
    Exception summary:
    The following is an exception stack listing   the exceptions in outermost to innermost order
    Inner exceptions are being indented
    Exception type:   Microsoft.SqlServer.Management.Sdk.Sfc.EnumeratorException
        Message:
            Failed to retrieve data for   this request.
        HResult : 0x80131500
        Data:
          HelpLink.ProdName   = Microsoft SQL Server
            HelpLink.BaseHelpUrl =
    http://go.microsoft.com/fwlink
            HelpLink.LinkId = 20476
            HelpLink.EvtType =
    0xB2652E58@0xDC80C325
          DisableWatson   = true
        Stack:
            at   Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object   connectionInfo, Request request)
            at   Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.ProcessDTbl(DataTable   dt, Int32 level)
            at   Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.CollectSqlDiscoveryData(String   machineName)
            at   Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.CollectDiscoveryData(String   machineName)
            at   Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.LoadData(IEnumerable`1   machineNames, String discoveryDocRootPath, String   clusterDiscoveryDocRootPath)
            at   Microsoft.SqlServer.Configuration.SetupExtension.RunDiscoveryAction.ExecuteAction(String   actionId)
            at   Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId,   TextWriter errorStream)
            at   Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter   statusStream, ISequencedAction actionToRun, ServiceContainer context)
        Inner exception type:   System.ComponentModel.Win32Exception
            Message:
                    Not   all privileges or groups referenced are assigned to the caller.
            HResult : 0x80004005
            Error : 1300
              Stack:
                    at   Microsoft.SqlServer.Configuration.Sco.AdjustTokenPrivilege.SetPrivilege(Boolean   enable)
                      at Microsoft.SqlServer.Configuration.Sco.AdjustTokenPrivilege..ctor(String   privilege)
                      at Microsoft.SqlServer.Configuration.Sco.SqlRegistry.GetLocallyCachedLocalMachineSubKey(ServiceContainer   ctx, String machineName, SqlRegistryKey
    key)
                      at   Microsoft.SqlServer.Discovery.DiscoveryUtils.TryLocallyCacheRegistryKey(ServiceContainer   ctx, String machineName, SqlRegistryKey
    machineKey, String registryPath,   RegistryView regView, String regPath, RegistryAccess registryAccess,   Boolean& alreadyCached)
                      at   Microsoft.SqlServer.Discovery.DiscoveryUtils.GetLocalMachineSubKey(ServiceContainer   ctx, String machineName, RegistryView regView,
    String regPath, RegistryAccess   registryAccess)
                      at   Microsoft.SqlServer.Discovery.DiscoveryEnumObject.GetSql2kMsiInstanceListInHive(String   machineName, RegistryView regView)
                      at Microsoft.SqlServer.Discovery.DiscoveryEnumObject.LoadSql2kInstanceList(String   machineName)
                      at Microsoft.SqlServer.Discovery.Product.GetData(EnumResult erParent)
                      at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData()
                      at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData(Request req,   Object ci)
                      at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.GetData(Object   connectionInfo, Request request)
                      at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object   connectionInfo, Request request)
    And the tail of the detailed log:
    (01) 2014-04-10 11:51:29 Slp: Completed Action:   InitializeMsiExtension, returned True
    (01) 2014-04-10 11:51:30 Slp:   ----------------------------------------------------------------------
    (01) 2014-04-10 11:51:30 Slp: Running Action:   AddPackageModifierSourcesAction
    (01) 2014-04-10 11:51:30 Slp: Completed Action:   AddPackageModifierSourcesAction, returned True
    (01) 2014-04-10 11:51:30 Slp:   ----------------------------------------------------------------------
    (01) 2014-04-10 11:51:30 Slp: Running Action:   InitializeConfigAction
    (01) 2014-04-10 11:51:30 Slp: Completed Action:   InitializeConfigAction, returned True
    (01) 2014-04-10 11:51:30 Slp:   ----------------------------------------------------------------------
    (01) 2014-04-10 11:51:30 Slp: Running Action:   RunRemoteDiscoveryAction
    (01) 2014-04-10 11:51:31 Slp: Running discovery on local   machine
    (01) 2014-04-10 11:51:33 Slp: Discovery on local machine   is complete
    (01) 2014-04-10 11:51:33 Slp: Running discovery on remote   machine: VMSPDB1
    (01) 2014-04-10 11:51:35 Slp: Discovery on VMSPDB1 failed due to exception
    (01) 2014-04-10 11:51:36 Slp:   Microsoft.SqlServer.Management.Sdk.Sfc.EnumeratorException: Failed to   retrieve data for this request. ---> System.ComponentModel.Win32Exception:   Not all privileges or groups referenced are
    assigned to the caller.
      at   Microsoft.SqlServer.Configuration.Sco.AdjustTokenPrivilege.SetPrivilege(Boolean   enable)
       at   Microsoft.SqlServer.Configuration.Sco.AdjustTokenPrivilege..ctor(String   privilege)
       at   Microsoft.SqlServer.Configuration.Sco.SqlRegistry.GetLocallyCachedLocalMachineSubKey(ServiceContainer   ctx, String machineName, SqlRegistryKey key)
       at   Microsoft.SqlServer.Discovery.DiscoveryUtils.TryLocallyCacheRegistryKey(ServiceContainer   ctx, String machineName, SqlRegistryKey machineKey, String registryPath,   RegistryView regView, String regPath, RegistryAccess
    registryAccess,   Boolean& alreadyCached)
       at   Microsoft.SqlServer.Discovery.DiscoveryUtils.GetLocalMachineSubKey(ServiceContainer   ctx, String machineName, RegistryView regView, String regPath, RegistryAccess   registryAccess)
       at   Microsoft.SqlServer.Discovery.DiscoveryEnumObject.GetSql2kMsiInstanceListInHive(String   machineName, RegistryView regView)
       at Microsoft.SqlServer.Discovery.DiscoveryEnumObject.LoadSql2kInstanceList(String   machineName)
       at   Microsoft.SqlServer.Discovery.Product.GetData(EnumResult erParent)
       at   Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData()
       at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData(Request   req, Object ci)
       at   Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.GetData(Object   connectionInfo, Request request)
       at   Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object   connectionInfo, Request request)
       --- End of inner exception stack trace ---
       at   Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object   connectionInfo, Request request)
       at   Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.ProcessDTbl(DataTable   dt, Int32 level)
       at   Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.CollectSqlDiscoveryData(String   machineName)
       at   Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.CollectDiscoveryData(String   machineName)
       at   Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.LoadData(IEnumerable`1   machineNames, String discoveryDocRootPath, String   clusterDiscoveryDocRootPath)
    (01) 2014-04-10 11:51:36 Slp: Error: Action   "Microsoft.SqlServer.Configuration.SetupExtension.RunDiscoveryAction"   threw an exception during execution.
    (01) 2014-04-10 11:51:36 Slp:   Microsoft.SqlServer.Setup.Chainer.Workflow.ActionExecutionException: Failed   to retrieve data for this request. --->   Microsoft.SqlServer.Management.Sdk.Sfc.EnumeratorException: Failed to  
    retrieve data for this request. ---> System.ComponentModel.Win32Exception:   Not all privileges or groups referenced are assigned to the caller.
    (01) 2014-04-10 11:51:36 Slp:    at   Microsoft.SqlServer.Configuration.Sco.AdjustTokenPrivilege.SetPrivilege(Boolean   enable)
    (01) 2014-04-10 11:51:36 Slp:    at   Microsoft.SqlServer.Configuration.Sco.AdjustTokenPrivilege..ctor(String   privilege)
    (01) 2014-04-10 11:51:36 Slp:    at   Microsoft.SqlServer.Configuration.Sco.SqlRegistry.GetLocallyCachedLocalMachineSubKey(ServiceContainer   ctx, String machineName, SqlRegistryKey key)
    (01) 2014-04-10 11:51:36 Slp:    at   Microsoft.SqlServer.Discovery.DiscoveryUtils.TryLocallyCacheRegistryKey(ServiceContainer   ctx, String machineName, SqlRegistryKey machineKey, String registryPath,   RegistryView
    regView, String regPath, RegistryAccess registryAccess,   Boolean& alreadyCached)
    (01) 2014-04-10 11:51:36 Slp:    at   Microsoft.SqlServer.Discovery.DiscoveryUtils.GetLocalMachineSubKey(ServiceContainer   ctx, String machineName, RegistryView regView, String regPath, RegistryAccess   registryAccess)
    (01) 2014-04-10 11:51:36 Slp:    at   Microsoft.SqlServer.Discovery.DiscoveryEnumObject.GetSql2kMsiInstanceListInHive(String   machineName, RegistryView regView)
    (01) 2014-04-10 11:51:36 Slp:    at   Microsoft.SqlServer.Discovery.DiscoveryEnumObject.LoadSql2kInstanceList(String   machineName)
    (01) 2014-04-10 11:51:36 Slp:    at   Microsoft.SqlServer.Discovery.Product.GetData(EnumResult erParent)
    (01) 2014-04-10 11:51:36 Slp:    at   Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData()
    (01) 2014-04-10 11:51:36 Slp:    at   Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData(Request req,   Object ci)
    (01) 2014-04-10 11:51:36 Slp:    at   Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.GetData(Object   connectionInfo, Request request)
    (01) 2014-04-10 11:51:36 Slp:    at   Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object   connectionInfo, Request request)
    (01) 2014-04-10 11:51:36 Slp:    --- End of   inner exception stack trace ---
    (01) 2014-04-10 11:51:39 Slp: Received request to add the   following file to Watson reporting:   C:\Users\HS2\AppData\Local\Temp\tmp6614.tmp
    (01)   2014-04-10 11:51:39 Slp: The following is an exception stack listing the   exceptions in outermost to innermost order
    (01)   2014-04-10 11:51:39 Slp: Inner exceptions are being indented
    (01)   2014-04-10 11:51:39 Slp:
    (01)   2014-04-10 11:51:39 Slp: Exception type:   Microsoft.SqlServer.Management.Sdk.Sfc.EnumeratorException
    (01)   2014-04-10 11:51:39 Slp:     Message:
    (01)   2014-04-10 11:51:39 Slp:           Failed to retrieve data for this request.
    (01)   2014-04-10 11:51:39 Slp:     HResult : 0x80131500
    (01) 2014-04-10 11:51:39 Slp:       Data:
    (01) 2014-04-10 11:51:39   Slp:       HelpLink.ProdName = Microsoft SQL   Server
    (01) 2014-04-10 11:51:39   Slp:       HelpLink.BaseHelpUrl =
    http://go.microsoft.com/fwlink
    (01) 2014-04-10 11:51:39   Slp:       HelpLink.LinkId = 20476
    (01) 2014-04-10 11:51:39 Slp:       Stack:
    (01) 2014-04-10 11:51:39   Slp:         at   Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object   connectionInfo, Request request)
    (01) 2014-04-10 11:51:39   Slp:         at   Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.ProcessDTbl(DataTable   dt, Int32 level)
    (01) 2014-04-10 11:51:39   Slp:         at   Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.CollectSqlDiscoveryData(String   machineName)
    (01) 2014-04-10 11:51:39   Slp:         at   Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.CollectDiscoveryData(String   machineName)
    (01) 2014-04-10 11:51:39   Slp:         at   Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.LoadData(IEnumerable`1   machineNames, String discoveryDocRootPath,
    String   clusterDiscoveryDocRootPath)
    (01) 2014-04-10 11:51:39   Slp:         at   Microsoft.SqlServer.Configuration.SetupExtension.RunDiscoveryAction.ExecuteAction(String   actionId)
    (01) 2014-04-10 11:51:39   Slp:         at   Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId,   TextWriter errorStream)
    (01) 2014-04-10 11:51:39   Slp:         at   Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter   statusStream, ISequencedAction actionToRun, ServiceContainer
    context)
    (01)   2014-04-10 11:51:39 Slp:     Inner exception type:   System.ComponentModel.Win32Exception
    (01)   2014-04-10 11:51:39 Slp:           Message:
    (01)   2014-04-10 11:51:39   Slp:                   Not all privileges or groups referenced are assigned to the caller.
    (01)   2014-04-10 11:51:39   Slp:                  
    (01)   2014-04-10 11:51:39 Slp:           HResult : 0x80004005
    (01)   2014-04-10 11:51:39 Slp:           Error : 1300
    (01) 2014-04-10 11:51:39   Slp:         Stack:
    (01) 2014-04-10 11:51:39   Slp:                   at   Microsoft.SqlServer.Configuration.Sco.AdjustTokenPrivilege.SetPrivilege(Boolean  
    enable)
    (01) 2014-04-10 11:51:39   Slp:                   at Microsoft.SqlServer.Configuration.Sco.AdjustTokenPrivilege..ctor(String   privilege)
    (01) 2014-04-10 11:51:39   Slp:                   at   Microsoft.SqlServer.Configuration.Sco.SqlRegistry.GetLocallyCachedLocalMachineSubKey(ServiceContainer  
    ctx, String machineName, SqlRegistryKey key)
    (01) 2014-04-10 11:51:39   Slp:                   at Microsoft.SqlServer.Discovery.DiscoveryUtils.TryLocallyCacheRegistryKey(ServiceContainer   ctx,
    String machineName, SqlRegistryKey machineKey, String registryPath,   RegistryView regView, String regPath, RegistryAccess registryAccess,   Boolean& alreadyCached)
    (01) 2014-04-10 11:51:39   Slp:                   at   Microsoft.SqlServer.Discovery.DiscoveryUtils.GetLocalMachineSubKey(ServiceContainer  
    ctx, String machineName, RegistryView regView, String regPath, RegistryAccess   registryAccess)
    (01) 2014-04-10 11:51:39   Slp:                   at   Microsoft.SqlServer.Discovery.DiscoveryEnumObject.GetSql2kMsiInstanceListInHive(String  
    machineName, RegistryView regView)
    (01) 2014-04-10 11:51:39   Slp:                   at   Microsoft.SqlServer.Discovery.DiscoveryEnumObject.LoadSql2kInstanceList(String   machineName)
    (01) 2014-04-10 11:51:39   Slp:                   at Microsoft.SqlServer.Discovery.Product.GetData(EnumResult erParent)
    (01) 2014-04-10 11:51:39   Slp:                   at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData()
    (01) 2014-04-10 11:51:39   Slp:                   at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData(Request req,   Object ci)
    (01) 2014-04-10 11:51:39   Slp:                   at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.GetData(Object   connectionInfo, Request request)
    (01) 2014-04-10 11:51:39 Slp:                   at   Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object   connectionInfo, Request request)
    (01) 2014-04-10 11:51:44 Slp: Watson Bucket 2
     Original Parameter Values
    (01) 2014-04-10 11:51:44 Slp: Parameter 0 : SQL Server  
    2012@RTM@KB2931078
    (01) 2014-04-10 11:51:44 Slp: Parameter 1 :   Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process
    (01) 2014-04-10 11:51:44 Slp: Parameter 2 :   Microsoft.SqlServer.Configuration.Sco.AdjustTokenPrivilege.SetPrivilege
    (01) 2014-04-10 11:51:44 Slp: Parameter 3 :
    Microsoft.SqlServer.Management.Sdk.Sfc.EnumeratorException@-2146233088  
    (01) 2014-04-10 11:51:44 Slp: Parameter 4 :
    System.ComponentModel.Win32Exception@-2147467259  
    (01) 2014-04-10 11:51:44 Slp: Parameter 5 :   RunRemoteDiscoveryAction
    (01) 2014-04-10 11:51:44 Slp: Parameter 8 : 1300
    (01) 2014-04-10 11:51:44 Slp:
     Final Parameter Values
    (01) 2014-04-10 11:51:44 Slp: Parameter 0 : SQL Server  
    2012@RTM@KB2931078
    (01) 2014-04-10 11:51:44 Slp: Parameter 1 : 0x6785B09D
    (01) 2014-04-10 11:51:44 Slp: Parameter 2 : 0xB2652E58
    (01) 2014-04-10 11:51:44 Slp: Parameter 3 : 0x74E34741
    (01) 2014-04-10 11:51:44 Slp: Parameter 4 : 0xDC80C325
    (01) 2014-04-10 11:51:44 Slp: Parameter 5 :   RunRemoteDiscoveryAction
    (01) 2014-04-10 11:51:44 Slp: Parameter 8 : 0xA05EFA62
    (01) 2014-04-10 11:51:45 Slp: Sco: Attempting to write   hklm registry key Microsoft SQL Server to file C:\Program Files\Microsoft SQL   Server\110\Setup   Bootstrap\Log\20140410_115053\Registry_SOFTWARE_Microsoft_Microsoft SQL  
    Server.reg_
    (01) 2014-04-10 11:51:45 Slp: The following exception   occurred while preparing registry logs during Watson failure processing: Not   all privileges or groups referenced are assigned to the caller.
    (01) 2014-04-10 11:51:45 Slp: Sco: Attempting to write   hklm registry key Uninstall to file C:\Program Files\Microsoft SQL   Server\110\Setup   Bootstrap\Log\20140410_115053\Registry_SOFTWARE_Microsoft_Windows_CurrentVersion_Uninstall.reg_
    (01) 2014-04-10 11:51:45 Slp: The following exception   occurred while preparing registry logs during Watson failure processing: Not   all privileges or groups referenced are assigned to the caller.
    (01) 2014-04-10 11:51:45 Slp: Sco: Attempting to write   hklm registry key MSSQLServer to file C:\Program Files\Microsoft SQL   Server\110\Setup Bootstrap\Log\20140410_115053\Registry_SOFTWARE_Microsoft_MSSQLServer.reg_
    (01) 2014-04-10 11:51:45 Slp: The following exception   occurred while preparing registry logs during Watson failure processing: Not   all privileges or groups referenced are assigned to the caller.
    (01) 2014-04-10 11:51:45 Slp: Sco: Attempting to write   hklm registry key Microsoft SQL Server to file C:\Program Files\Microsoft SQL   Server\110\Setup   Bootstrap\Log\20140410_115053\Registry_SOFTWARE_Wow6432Node_Microsoft_Microsoft  
    SQL Server.reg_
    (01) 2014-04-10 11:51:45 Slp: The following exception   occurred while preparing registry logs during Watson failure processing: Not   all privileges or groups referenced are assigned to the caller.
    (01) 2014-04-10 11:51:45 Slp: Sco: Attempting to write   hklm registry key Uninstall to file C:\Program Files\Microsoft SQL   Server\110\Setup   Bootstrap\Log\20140410_115053\Registry_SOFTWARE_Wow6432Node_Microsoft_Windows_CurrentVersion_Uninstall.reg_
    (01) 2014-04-10 11:51:45 Slp: The following exception   occurred while preparing registry logs during Watson failure processing: Not   all privileges or groups referenced are assigned to the caller.
    (01) 2014-04-10 11:51:45 Slp: Sco: Attempting to write   hklm registry key MSSQLServer to file C:\Program Files\Microsoft SQL   Server\110\Setup Bootstrap\Log\20140410_115053\Registry_SOFTWARE_Wow6432Node_Microsoft_MSSQLServer.reg_
    (01) 2014-04-10 11:51:45 Slp: The following exception   occurred while preparing registry logs during Watson failure processing: Not   all privileges or groups referenced are assigned to the caller.
    (01) 2014-04-10 11:51:46 Slp: Failed to retrieve data for   this request.
    (01) 2014-04-10 11:51:46 Slp: Watson bucket for exception   based failure has been created
    (01) 2014-04-10 11:51:46 Slp: Sco: Attempting to create   base registry key HKEY_LOCAL_MACHINE, machine
    (01) 2014-04-10 11:51:46 Slp: Sco: Attempting to open   registry subkey Software\Microsoft\Microsoft SQL Server\110
    (01) 2014-04-10 11:51:46 Slp: Sco: Attempting to get   registry value EnableErrorReporting
    (01) 2014-04-10 11:51:46 Slp: WER: Successfully read app   consent from registry Software\Microsoft\Microsoft SQL   Server\110\EnableErrorReporting=0.
    (01) 2014-04-10 11:51:46 Slp: WER: Application level   consent value '0' was mapped to consent status 'WerConsentDenied'
    (01) 2014-04-10 11:51:46 Slp: WER: Result of the   submission:: 'WerDisabled'
    (01) 2014-04-10 11:51:46 Slp: WER: Submitted 1 of 1   failures to the Watson data repository
    (01) 2014-04-10 11:51:46 Slp: Sco: File   'C:\Windows\system32\Cluster.exe' does not exist
    (01) 2014-04-10 11:51:46 Slp: Failed to collect cluster   logs, cannot find Cluster.exe under system directory.
    (01) 2014-04-10 11:51:46 Slp: Dumping final cluster state.
    (01) 2014-04-10 11:51:49 Slp: Completed dumping final   cluster state.
    (01) 2014-04-10 11:51:51 Slp:
    (01) 2014-04-10 11:51:51 Slp:   ----------------------------------------------------------------------
    (01) 2014-04-10 11:51:51 Slp:
    (01)   2014-04-10 11:51:51 Slp: Error result: -2146233088
    (01)   2014-04-10 11:51:51 Slp: Result facility code: 19
    (01)   2014-04-10 11:51:51 Slp: Result error code: 5376
    (01)   2014-04-10 11:51:51 Slp: SQM Service: Sqm does not have active session.

    Hello SQL Ranger,
    Thanks for posting the detailed log. I dont have exact solution for this but I can give you some hint what could be reason patch has failed below message points to fact that there is some issue with account which is used to install CU patch.Have alook at
    below log.It says that when patch was trying to get details from other node in cluster it was not able to.
    01) 2014-04-10 11:51:33 Slp: Discovery on local machine is complete
    (01) 2014-04-10 11:51:33 Slp: Running discovery on remote machine: VMSPDB1
    (01) 2014-04-10 11:51:35 Slp: Discovery on VMSPDB1 failed due to exception
    (01) 2014-04-10 11:51:36 Slp: Microsoft.SqlServer.Management.Sdk.Sfc.EnumeratorException: Failed to retrieve data for this request. ---> System.ComponentModel.Win32Exception: Not all privileges or groups referenced are assigned to the caller.
    IMO I strongly feel it is issue with the account. Microsoft has also documented about this for SQL Server 2008 .Have a look at following links
    http://support.microsoft.com/default.aspx?scid=kb;en-US;2000257
    Please also assign privilege mentioned in below link
    http://www.bradg.co.za/?p=12
    Hope this helps
    Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

  • Net8 Config failure after installing Oracle 8.1.7 on AIX 4.3.3

    Failure on the installed step Net8 Configuration, the message on the Installed log "installAction.log" is :
    Starting to execute optional autolaunch configuration tools
    Launched configuration tool Net8 Configuration Assistant
    Command which is being spawned is /oracle/app/oracle/product/8.1.7/JRE/bin/jre -Duser.dir=/oracle/app/oracle/product/8.1.7/network/jlib -classpath /oracle/app/oracle/product/8.1.7/JRE/lib/i18n.jar:/oracle/app/oracle/product/8.1.7/JRE/lib/rt.jar:/oracle/app/oracle/product/8.1.7/jlib/ewt-3_3_6.jar:/oracle/app/oracle/product/8.1.7/jlib/netcfg.jar:/oracle/app/oracle/product/8.1.7/network/jlib/netcam.jar:/oracle/app/oracle/product/8.1.7/network/jlib/netca.jar:/oracle/app/oracle/product/8.1.7/jlib/help-3_1_8.jar:/oracle/app/oracle/product/8.1.7/jlib/ice-4_06_6.jar:/oracle/app/oracle/product/8.1.7/jlib/share-1_0_8.jar:/oracle/app/oracle/product/8.1.7/jlib/swingall-1_1_1.jar:/oracle/app/oracle/product/8.1.7/network/tools:/oracle/app/oracle/product/8.1.7/jlib/opsclust.jar oracle.net.ca.NetCA /orahome /oracle/app/oracle/product/8.1.7 /instype custom /inscomp client,net8,javavm,server /insprtcl tcp /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile /oracle/app/oracle/product/8.1.7/network/install/netca_typ.rsp
    Configuration tool Net8 Configuration Assistant was canceled
    Result code for launching of configuration tool is -1
    Launched configuration tool Oracle Database Configuration Assistant
    Command which is being spawned is /oracle/app/oracle/product/8.1.7/bin/dbassist -responseFile NO_VALUE -createtype custom -numusers NO_VALUE -apptype NO_VALUE -cartridges NO_VALUE -options NO_VALUE -demos NO_VALUE -seedloc /oracle/app/oracle/product/8.1.7/starterdb -sid orcl -orabase /oracle/app/oracle/product/8.1.7 -dbloc /oradata -clususer NO_VALUE -cluspswd *Protected value, not to be logged* -nodeinfo NO_VALUE -gdbName orcl
    Configuration tool Oracle Database Configuration Assistant failed
    Result code for launching of configuration tool is 1
    Error :*** Alert: One or more tools have failed. It is recommended but not required that these tools succeed for this installation. You can now select these tools, read its details to examine why they failed, fix those problems, and retry them. Or, you can click "Next" to continue. ***
    User selected: Yes/OK
    I start "Net8 Configuration Assistant" manually and get the following error meesage :
    $ netasst
    Error loading native library: libnjni8.so.
    java.lang.UnsatisfiedLinkError: jniGetOracleHome
    at
    at oracle.net.common.NetGetEnv.getOracleHome(Compiled Code)
    at oracle.net.asst.container.NetUtils.getImageDirectory(Compiled Code)
    at oracle.net.asst.container.NetApplication.init(Compiled Code)
    at oracle.sysman.emSDK.client.appContainer.WebApplication.main(Compiled
    Code)
    Can anybody tell me what is wrong with it?

    This is the same problem that we have encountered installing 8.1.7 clients on AIX 4.3.3 and 5.2. However I did successfully install it on one AIX 4.3.3 machine. Comparing the oracle logs there are no differences in the successful and unsuccessful installs until the point netasst hangs. All the machines are definitely set to run the 32 bit kernel.

  • Failure to install 10.8.4 on Brand new SSD???

    Hey
    So I recently decided to upgrade to an Intel 160GB SSD drive in my 2011 MacBook Pro i7 and reinstall Mountain Lion from scratch. I'm able to install my 10.8 Mountain Lion which I downloaded from the App store and created a bootable USB version to run the install. Everything works fine and I'm able to setup a user account without any issues. No problems there.
    As soon as I run software update and try to update to the latest 10.8.4 combo update from both the App Store and Apple's Support/Download area it will go through the entire installation and restart but when booting up all I get is a grey circle with a line through it? I've tried this 3 times and all 3 times it's the same thing. I've even tried updating to the previous 10.8.3 assuming the latest update was buggy but alas the same result. I know it's not the drive causing failures since it will install 10.8 without issue everytime after running disk utility and re-initializing and the drive was purchased brand new and sealed so I don't assume it's DOA equipment. Any suggestions why this is happening??? Does 10.8.3 or 10.8.4 not support SSD drives? Am I stuck using 10.8 for the rest of my years?
    Any help would be gladly appreciated as I'd really like to stick with the SSD option rather than throw back the 500GB drive inside, which in turn runs 10.8.4 perfectly, go figure?
    Here are the makes and models of both items if that makes a difference.
    Apple MacBook Pro "Core i7" 2.0 15" Early 2011
    Intel Core i7 2.0 GHz
    4 GB 1333 DDR3 MHz
    500 GB SATA
    Intel® SSD 320 Series
    (160GB, 2.5in SATA 3Gb/s, 25nm, MLC)

    Hey Walser,
    Thanks so much, that definitely did the trick!!! I had to pop the SSD in a Windows Laptop and run the firmware from the CD but all is well now. I should have figured it was a firmware issue but didn't think twice assuming since it was brand new out of the box that it would be running the latest revision anyways.
    Thanks alot for your support, I wish I had asked a day earlier it would have saved me 3 hours of re-installs and cursing.
    Appreciate it.
    SK

Maybe you are looking for

  • Project Report in Report Painter

    Hi, Need your help for one of my issue. Current issue in the System / reqirment: There is a project report in report painter-GR55 which used to provide planed / actual cost and planed / actual quantity of the project. Whenever we are trying to run th

  • Will my Elgato Game Capture HD work on the ps4?

    Please give me an answer I bought a elgato game capture hd a while back and wanted to record ps4 with it...but there are people saying our recording devices can't be used to capture with. I don't care about the "SHARE BUTTON" so don't say "O the shar

  • Change the resolution of stretch screen when playing films on itunes.

    I buy all my films on iTunes, and love the service. But the majority of films on iTunes are for widescreen, which my computer and TV are. When I plug my pc into the TV the film plays and just about half of the screen- a quarter of it black at the top

  • How can I save jpegs and upload to web sites

    I would like to be able to save files in a folder and have the ability to upload them to web sites

  • Missing messages or warning in Monitor

    Hi, I am doing delta initilation from R/3 . In monitor the respective Request is turned into yellow. In the detail tab i found something wrong under 'processing' of a specific datapackage. In this step,upto update rules is OK,The remaining things( Up