Illustrator will not change Output mode to Separations (Host-Based).

I am on a Windows with 8.1 and I have been able to do it on a Mac, but I do not own one and should be able to do this on my computer.
As the picture shows I have it set to Print to > Post script and the output does not allow a change.

I read a lot of those and tried downloading some, I have the option to now save as Separations, however it doesn't seem right still.. The download also gave me a bunch of different files and I'm not sure which one is right..

Similar Messages

When I access Editor the mode is set on EXPERT will not change to GUIDED or QUICK. Pages overlap.?

When I access Editor the mode opens at EXPERT and will not change to QUICK or GUIDED. Pages seem to overlap and preclude access to the left hand task menu. The operation freezes and the only solution is to cancel the task in Task Manager. HELP!! illidgew4742172

Good day!
Are you talking about Photoshop proper?
If not please refer to the appropriate Forum, if yes please post a screenshot to clarify the issue.
Regards,
Pfaffenbichler

My iPad 3 will not change the orientation to landscape mode. I have checked the orientation switch and turned it off for a reset neither of which fixes the problem.

My iPad 3 will not change the orientation to landscape mode. I have checked the orientation switch and turned off for a reset. Neither fixes the problem. What can I do?

Is it lock in the Control Center? (tap to enlarge)

Gnome battery icon and 'Could not change DPMS mode'

Hello,
I run my Arch with latest Gnome (3.2.1) and lately, my battery icon disappeared. Then, after some reboot it showed again (without changes to configuration, packages etc), and now its gone again, for good it seems.
My .xsession-errors output is:
/etc/gdm/Xsession: Beginning session setup...
localuser:ironhalik being added to access control list
/etc/gdm/Xsession: Setup done, will execute: /usr/bin/ssh-agent -- gnome-session
GNOME_KEYRING_CONTROL=/tmp/keyring-fufDqS
GNOME_KEYRING_CONTROL=/tmp/keyring-fufDqS
SSH_AUTH_SOCK=/tmp/keyring-fufDqS/ssh
GNOME_KEYRING_CONTROL=/tmp/keyring-fufDqS
SSH_AUTH_SOCK=/tmp/keyring-fufDqS/ssh
GPG_AGENT_INFO=/tmp/keyring-fufDqS/gpg:0:1
GNOME_KEYRING_CONTROL=/tmp/keyring-fufDqS
SSH_AUTH_SOCK=/tmp/keyring-fufDqS/ssh
GPG_AGENT_INFO=/tmp/keyring-fufDqS/gpg:0:1
(gnome-settings-daemon:1442): power-plugin-WARNING **: Unable to start power manager: Could not change DPMS mode
** Message: a new manager occured at org.globalmenu.manager, :1.2
Initializing tracker-miner-fs...
Tracker-Message: Setting up monitor for changes to config file:'/home/ironhalik/.config/tracker/tracker-miner-fs.cfg'
Starting log:
File:'/home/ironhalik/.local/share/tracker/tracker-miner-fs.log'
Initializing tracker-store...
Tracker-Message: Setting up monitor for changes to config file:'/home/ironhalik/.config/tracker/tracker-store.cfg'
Tracker-Message: Setting up monitor for changes to config file:'/home/ironhalik/.config/tracker/tracker-store.cfg'
Starting log:
File:'/home/ironhalik/.local/share/tracker/tracker-store.log'
(tracker-store:1541): Tracker-CRITICAL **: D-Bus service name:'org.freedesktop.Tracker1' is already taken, perhaps the daemon is already running?
** Message: a new manager occured at org.globalmenu.manager, :1.2
e-data-server-ui-Message: Unable to find password(s) in keyring (Keyring reports: No matching results)
** Message: a new manager occured at org.globalmenu.manager, :1.2
** Message: a new manager occured at org.globalmenu.manager, :1.2
Failed to play sound: File or data not found
** Message: applet now removed from the notification area
(gnome-shell:1497): folks-DEBUG: individual-aggregator.vala:310: Setting primary store IDs to defaults.
(gnome-shell:1497): folks-DEBUG: individual-aggregator.vala:338: Primary store IDs are 'eds' and 'system'.
JS LOG: GNOME Shell started at Mon Jan 23 2012 02:16:40 GMT+0100 (CET)
Window manager warning: Log level 32: a new manager occured at org.globalmenu.manager, :1.2
Window manager warning: CurrentTime used to choose focus window; focus window may not be correct.
Window manager warning: Got a request to focus the no_focus_window with a timestamp of 0. This shouldn't happen!
** Message: a new manager occured at org.globalmenu.manager, :1.2
** Message: applet now embedded in the notification area
(tracker-miner-fs:1513): Tracker-WARNING **: Couldn't properly parse desktop file 'file:///usr/share/applications/brasero-nautilus.desktop': 'Desktop file doesn't contain type'
** Message: a new manager occured at org.globalmenu.manager, :1.2
(gnome-shell:1497): St-WARNING **: Ignoring length property that isn't a number
(gnome-shell:1497): St-WARNING **: Ignoring length property that isn't a number
** (leafpad:1696): DEBUG: gtk-menubar-gtk2.vala:25: map called
** Message: a new manager occured at org.globalmenu.manager, :1.2
refresh /open=true
refresh /0/open=true
path = /0, item is 0x963ec28
refresh /open=false
refresh /0/open=false
refresh /open=true
refresh /0/open=true
path = /0, item is 0x963ec28
refresh /1/open=true
path = /1, item is 0x963ed60
refresh /3/open=true
path = /3, item is 0x963f100
refresh /open=false
refresh /3/open=false
(gnome-shell:1497): St-CRITICAL **: setup_framebuffers: assertion `width > 0' failed
(gnome-shell:1497): St-WARNING **: Ignoring length property that isn't a number
(gnome-shell:1497): St-WARNING **: Ignoring length property that isn't a number
** (leafpad:1716): DEBUG: gtk-menubar-gtk2.vala:25: map called
** Message: a new manager occured at org.globalmenu.manager, :1.2
refresh /open=true
refresh /0/open=true
path = /0, item is 0x9343c18
refresh /open=false
refresh /0/open=false
Any ideas?
Thanks

Ok, I reinstalled gdm, added my user to the video group and so far it seems to be working properly, so thank you very much.
Now I just need to see if it will stick that way, since it seems to come and go somewhat randomly.
And btw, I use the presentation mode shell extension, but disabling it did not have any effect.
EDIT:
Ok, it seems the source of the problem was this little addon to /etc/gdm/Init/Default, that I used to launch synergy in GDM:
/usr/bin/killall synergyc
while [ $(pgrep -x synergyc) ]; do sleep 0.1; done
/usr/bin/synergyc 192.168.0.2
Since synergy controls the display power state, it would add up.
Last edited by ironhalik (2012-01-23 19:09:43)

Bugs? playback resolution will not change?

The playback resolution will not change no matter what I choose ? it may be contributing to the distorted playback issues im having ? also when I select a clip from the project or media browser the sequence automatically starts in arri editing mode? I switch to dslr but the playback gets worse.
win 7
64
gtx780

When you refer to playback resolution, do you mean the setting highlighted in this screenshot?
If so, what happens when you try to change the setting? And, of course, if that's not what you were referring to, please elaborate.
And when you say "when I select a clip from the project or media browser the sequence automatically starts in arri editing mode," are you referring to creating a sequence from the clip? If so, the editing mode generally doesn't matter much unless you plan to use "smart encoding" or to enable "Match Sequence Settings" or "Use Preview Files" when you export, neither of which is recommended in most cases. The main properties of the sequence settings that you want to make sure are right are the height, width, pixel aspect ratio, and frame rate.
As to the distorted playback issues, a screenshot might help to start troubleshooting that.
Finally, please specify exactly which version of Premiere you have--the three-part number like 2014.0.1, not simply CC or CS6.

Illustrator will not open certain files

Certain files that I created in Illustrator will not open when I try to open them. I try to open the file and the AI application opens but the file itself does not. If I right click on the file and select properties, under security it says I have no permissions. However on other files created at the same time I have permissions and they open in AI just fine. thoughts?

That is strange, but if this is on your work computer, your should probably contact your system administrator to set it so that you have permission to use these images. If this is on your home computer, you should be able to change the permissions on your own.

TS1398 my wifi will not change from off to on. I have done everything possible, including resetting my network settings. Internet is working fine on tablet etc.

My wifi will not change from off to on. I have done everything possible, including resetting my network settings. Internet is working fine on tablet etc.

Hello dthlah,
Thanks for the question. Based on the information you have provided, it sounds like your Wi-Fi option on an iPhone 4S is greyed out. The following article explains this issue and potential resolution:
iOS: Wi-Fi settings grayed out or dim
http://support.apple.com/kb/TS1559
Follow these steps to resolve the issue:
1. Verify that airplane mode is off by tapping Settings > Airplane Mode.
2. Reset the network settings by tapping Settings > General > Reset > Reset Network Settings.
Note: This will reset all network settings, including Bluetooth pairing records, Wi-Fi passwords, VPN, and APN settings
3. Ensure that your device is using the latest software. To do so, connect your device to your computer and check for updates in iTunes.
4. If your issue is still unresolved, perform a software restore in iTunes.
If you are still unable to turn Wi-Fi on, please contact Apple for support and service options.
Thanks,
Matt M.

View only works in one direction,will not change when I turn the phone

view only works in one direction,will not change when I turn the phone

Is the rotate lock on?
http://appletoolbox.com/2013/03/iphone-ipad-or-ipod-screen-will-not-rotate-fix/

Adobe Illustrator will not launch when Flash is running

A few of our users have reported that once Flash is running Adobe Illustrator will not launch. We are moving from Windows XP SP2 to Windows XP SP3. The version of both Illustrator and Flash is CS2 (will be upgraded later to CS3).
This used to work on SP2 - anyone can give some hints on this?

Nobody ever solved this

Finder Icon will not change! Please help!

I have been customizing the look of of my dockbar on my imac by giving all of my apps new ios 7 style icons.
Yesterday I changed my Finder icon with no problem at all by going to:
System→Library→Core Services→(right click 'Dock'→Show Package Contents)→Contents→Resources.
And replacing the two png files (finder.png) and ([email protected]) with my new images. Yesterday I did this all perfectly fine and it changed to my new icon.
However today I found a better finder icon and decided to change it again to this new version. However what ever I try it will not change to this new icon.
I have followed the exact same steps as before, I have replaced my two png files from yesterday with my new ones and I have checked and re-checked that I am naming the files correctly, and that they are the right format etc.
I have even deleted my original icons that I changed it to yesterday and emptied them from the trash but it is still there even after restarting and shutting down and rebooting.
I have also tried going to terminal and typing 'killall Dock', it still returns with the same icon that I changed it to yesterday, even though I have deleted them from my hard drive.
Please help me this is so frustrating and have wasted many many hours on this.
(I am on mavericks btw)

(I am on mavericks btw)
iMac, OS X Mountain Lion (10.8.4)
Then, update your profile/product info. BTW, I have nothing for the icon problem.

Statistic report with figures that will not change when rerun months later

Hi,
Is there any good practices that we can follow to create statistic reports with figures that will not change even when rerun after few months later?
My scenario is my statistic report is generated based on data that is "alive" which means the record will get change after a period of time. So, if you generate the statistic report in for January 2006 in the month of January and regenerate in May for the January 2006 statistic, the figure is different. But what I want is to be able to get the same figures.
I know in this case looks like we need some sort of summary tables, so posting this to get advice on the best way to design such summary tables. Please comment if there is other ways of doing it.
Summary tables may work for statistic report, but how to support detail report listing where the records are required to be the same when it was generated few months ago.
Please advise.
Thank you.

What happens, when you execute a report today is the following: a select statement is fired at the data base and the result set is displayed in the report. The data can change after the moment you launched your report. What you could do to keep the result set the same, is implementing a user parameter that fills your date discriminator.

In the advanced tab of languages and Region the time and date formats will not change

For a certian Application I am using I need to change the format of the Time and Date. I had no problems in Mountain Lion. In the advanced tab of languages and Region the time and date formats will not change. I need the date format to read as 01/01/14 and time format to read 13:00. As I said this was easily done in Mountain Lion and all previous Apple OS. I suspect it's an issue with in the OS.

You're right, it has been that way for a long time. I've never bothered reporting it as a bug since it's simple enough to deal with, but reporting it would be a reasonable thing to do.

External Hyperlinks Will Not Change after Publishing

Hi - I'm running the most up to date iWeb and trying to publish external hyperlinks that will not change no matter what I do. They do not overlap, there is no image blocking them, and I have checked and rechecked that they work on iWeb perfectly. I have tried saving each update individually with the inspector, publishing each update individually, re-entering each url then tab or enter - basically everthing suggested on these forums. The site is scullyfilm.com and the external links are to my pages on my squarespace site.
Any ideas?

It's very simple to do and it's virtually impossible to do it wrong.
Here's how I did it.
Went to Squarespace :
http://scullyfilm.squarespace.com/
Right-clicked a link and copied it :
In iWeb, selected a button and made it a hyperlink. iWeb automagically places the copied link in the URL field :
Repeated for other 3 links.
There's currently ONE hyperlink on your page (last updated 20140113) :
http://scullyfilm.com/scullyfilm/HOME.html
and it links to :
http://scullyfilm.com/casting/
which does not exist.

My Ipod touch will not change songs or shuffle

My I pod touch will not change or shuffle songs. Everything else seems to be working correctly. Any suggestions?

While playing any song on your iPod, tap the artwork to bring up the scrubber bar and additional controls. On the left hand side is a option for repeat. You want to make sure this icon is white (meaning it is set to Off). If it isn't tap it either one or two times to change its current setting.
Any luck there?
B-rock

Why does the Iphone4 freeze up after downloading the IOS7.6 patch showing an ITUNE icon? The phone will not change screens for 4 hours.

Why does the Iphone4 freeze up after downloading the IOS7.6 patch showing an ITUNE icon? The phone will not change screens for 4 hours.
I Turn it off/on and nothing changes.

Hello bigboza,
Thank you for using Apple Support Communities.
For more information, take a look at:
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
If the device remains unresponsive or does not turn on (or power on), reset your device.
If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
Let it charge for at least twenty minutes, then see if it starts normally.
If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
If the screen displays a red battery icon, continue charging the device until the battery is fully charged. Learn more about charging iPhone and iPod touch, or iPad.
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane. Learn more aboutrestoring iOS software.
Have a nice day,
Mario

Illustrator will not change Output mode to Separations (Host-Based).

Similar Messages

Maybe you are looking for