Im having trouble with my volume. The only time i can hear my iphone's sound, is when i have heaphones plugged in. How do i fix this
Im having trouble with my volume. The only time i can hear my iphone's sound, is when i have heaphones plugged in. How do i fix this
Hello Malique2k14,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
No sound or distorted sound from speaker
Receiver issues
Best of luck,
Mario
Similar Messages
-
I've only had this iphone 5 for a few months, i was able to talk to people perfectly fine but now for some reason, i have to put them on speaker phone or use my headset to hear them, if i don't have them on either, i can't hear anything they are saying. anyone know what causes this?
I think you have a pretty good mastery of the internet to be able to figure that out.
-
Hi I am having trouble with iMessage on the mac book pro, it doesnt sync with the ipad and iPhone, both the ipad and iPhone do but not on the mac book pro , has anyone any suggestions, thanks in advance
First, make sure that all your devices are using the same Apple ID in iMessages including your Mac. Second, your messages that you've already started on your devices will not show up on your Mac - only ones that you start from now on will show up. Third, if you're still not syncing accross all devices, make sure you read the directions on the first page of this thread. It should work after performing those steps. Good luck!
-
As stated I'm having trouble with my computer, I boot it up and within a few minutes it freezes and I have to restart it, I tried updating it to the latest mavericks but it won't finish the installation it's stuck at the end, what can I do to fix this? I need it for homework tonight.
Crowntheme,
you can try this: boot your MacBook Pro into Recovery mode by holding down a Command key and the R key as it starts up. Once the Mac OS X Utilities menu appears, select Disk Utility. On the left-hand side of the Disk Utility window, select your internal disk’s boot partition (typically called “Macintosh HD”). On the right-hand side, press the Verify Disk button if it’s not greyed out; if it is greyed out, or if it reports that errors were found, press the Repair Disk button. Once the verification/repair is completed, exit Disk Utility and select Restart from the Apple menu to restart in normal mode. Does it still freeze after a few minutes? -
I am having trouble with my iTunes recognizing my iPad. It recognizes my iPhone just fine, and I have gone through the entire troubleshooting section. Anyone have any possible solutions?
Device not recognized by iTune
http://support.apple.com/kb/TS1591 -
I am having trouble with Itunes registering the Mp4 video that has been converted. Help!!
I am having trouble with Itunes registering the MP4 video that has been converted. Help!
What do you mean by iTunes registering the mp4?
Which iTunes, on iPad, iTunes is a Store and it won't take your .mp4.
On pc, check if it supports the mp4 (there are a number of different mp4 format) you have converted.
Can you import it to computer iTunes? -
i am having trouble with downloading videos from my Sony HDR-XR160 video camera. iMovie doesnt open up when i connect the camcorder. any suggesions?
Looking up your camera online, I found it is capable of 1920 x 1080 Full HD 60p Recording. It's the 60p (60 frames per second Progressive) that's the problem I think. iMovie '11 will do 60i (Interlaced). You might need to convert it from the format the camera currently uses into another format to get it into iMovie. Read more about it on this link here: How to import 60p footage From that message thread comes the recommendation to use ClipWrap to convert the camera's video clips now that they are in 60p:
Tom Wolsky
Re: How to import 60p footage
Aug 17, 2011 12:40 PM (in response to ptburnett68)
Use ClipWrap to rewrap to QuickTime. Import the files. Edit in either 59.94 or 29.97. The latter if you want to use the high frame rate for slomo -
having trouble with my Airport Utility not supporting either of my Airports Expresses or Basestation. Do i have to update Firmware of airports or is the issue with my version of Utility which i believe is the latest. Thank you.
AirPort Utility in Mountain Lion will not support the older versions of the AirPort Express.....model numbers A1084 and A1088. Check on the side of the Express for the model number.
In addition, AirPort Utility in Mountain Lion will not support the older "round" or "dome" shaped versions of the AirPort Extreme.
Can you check to see how your devices might be affected? -
Is anyone having trouble with internet on the new macbook air and an old modem?
Is anyone having trouble with internet on the new macbook air using an old modem?
I live in NYC and have an old modem/router and keep getting kicked off the internet. I have time warner as my internet provider.Hello there adell723,
I suggest taking a look at this article we have named Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6 found here http://support.apple.com/kb/HT4628?viewlocale=en_US.
Symptom: The network connection drops unexpectedly
Your Mac may not not stay connected to your Wi-Fi network reliably.
Your Mac may stop accessing the Internet during use.
Solution
Use these steps if your computer disconnects from its Wi-Fi network unexpectedly.
Check your range to the Wi-Fi router and reduce the effect of interference.If your computer is too far from your Wi-Fi router or your environment has too much Wi-Fi interference, then your computer may not detect the Wi-Fi network properly. The easiest way to check for range limits with your Wi-Fi network is to move your computer or your Wi-Fi router closer together and make sure that there are no obstructions (such as walls, cabinets, and so forth) between the router and your computer.See Potential sources of wireless interference for more information about interference and solutions.
Try connecting to a different Wi-Fi network. If your computer works fine when connected to a different Wi-Fi network, then the issue may be related to your network router or ISP. In that case, contact the manufacturer of your router or your ISP.
If you have Mac OS X 10.8.4 Mountain Lion installed then I would recommend using Wireless Diagnostics tool which is on your computer already.
Here is the article for it and how to use it to assist with wifi connectivity issues.
About Wireless Diagnostics
http://support.apple.com/kb/HT5606
Cheers,
Sterling -
I am having trouble with my speakers not working while online particular on facebook. My audio works when playing audio files.
Hi,
Did it happen all the time or sometime?
Please check online browser status:
Click Volume icon in the taskbar, click Mixer link button as below:
If it's fine, follow this guide to run troubleshooter to detect and fix the issue:
Tips for fixing common sound problems
http://windows.microsoft.com/en-in/windows/tips-fixing-common-sound-problems#tips-fixing-common-sound-problems=windows-7
Meanwhile, this similar thread also could be referred:
https://social.technet.microsoft.com/forums/ie/en-US/a4a1cfe5-93a5-4c0b-9bf6-f7db0304f2ba/no-sound-on-youtube-or-any-other-webpage
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Just bought a new iPhone and am having trouble with iTunes and App Store. I can log in to Cloud, iTunes, and app store but once I try to download, it says "Youe apple id has been disabled". I've reset my password three times and have no issue on my Pad.
Hi FuzzyDunlopIsMe,
Welcome to the Support Communities!
It's possible that resetting your password multiple times has triggered this security. Click on the link below for assistance with your Apple ID Account:
Apple ID: Contacting Apple for help with Apple ID account security
http://support.apple.com/kb/HT5699
Here is some additional information regarding your Apple ID:
Apple ID: 'This Apple ID has been disabled for security reasons' alert appears
http://support.apple.com/kb/ts2446
Frequently asked questions about Apple ID
http://support.apple.com/kb/HT5622
Click on My Apple ID to access and edit your account.
Cheers,
- Judy -
Only partial songs downloaded when I purchased an album. How do I fix this without having the buy the whole album again?
If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copies of the dodgy tracks and try redownloading fresh copies. For instructions, see the following document:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Otherwise, I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the items that are not playing properly. If you can't see "Report a Problem" next to the items, click the "Report a problem" button. Now click the "Report a Problem" links next to the items. -
Running a mid 2009 iMac on 10.7.5, 3 gb memory, 320 gb hd.
Suddenly the computer stoped reading DVDs and the only time I can read a CD is if I restart. Quite often when I insert a CD it gets stuck and I cannot get it out until I restart and it shows up on the desktop where I can then eject it.
I have checked and double checked the finder prefs and all looks normal showing a check mark on CDs,DVDs etc. (the ones I want to show up on the desktop)
I have reset the PEAM, repaired permissions with both the disk utility on the computer and the disk utility when I start up in the Recovery Disk. I did notice that sometimes the permission repeat the same correction several times before it moves on, and sometimes it doesn’t. I have Windows installed on a partition but I keep it unmounted until it is needed for my wife’s work. The dock seems to be just fine and all the apps seems to run just fine. When I insert a photo CD iPhoto does not open but when I insert a music CD iTunes does open.
Also, most every time I open iPhoto it takes a long time(sometimes as long as 2 minutes) for it to load.
Sometimes my Mail (Mail 5.3) does not post new mail but most of the time it does.
Once and a while it seems like the computer slows way down but then it seems ok ten minutes later.
All of these ‘things’ seemed to have happen suddenly and I have not downloaded anything from the internet in some time.
Of course the warranty and extended warranty are both no longer in effect having had this computer for more than three years.
I am running Java and Adobe Player because some of the sites I go to a lot require both.I believe that insufficient RAM may be the source of some of your problems. If you have a RAM of somewhere 4 to 8GB, you will experience smoother computing. 3GB doesn't seem right, so you might want to learn more by going to this site:
http://www.crucial.com/store/drammemory.aspx
I don't know what know what's happening with your optical drive, but it seems you use your drive quite a bit. In that case, look into a lens cleaner for your machine. It's inexpensive, works quite well.
I hope you'll post here with your results! -
Since I have changed from Windows 7 to Windows 8.1, I have not been able to start up Photoshop Elements 9! or Premiere Elements 9! The menu starts up alright, but the programs don't start when I press any buttons. How do I fix this problem?
If Layers is greyed out it possibly means that you are in Quick Mode. Select 'Expert' and all the options should become available.
Try permanently associating psd files with C:\Program Files (x86)\Adobe\Photoshop Elements 12\PhotoshopElementsEditor.exe and see if that fixes the issue. Instructions here - http://windows.microsoft.com/en-gb/windows-8/choose-programs-windows-uses-default.
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks. -
My macbook isn't turning on. I have taken the battery out, reconnected it and I still have no response. How do I fix this?
If you want Apple to help you you'll have to take the Mac to a store.
Your problem is very unusual, the only suggestion I can give is to back up all your personal data and reinstall Mac OS X as it appears to be corrupted somehow. It may also be worth replacing the hard drive at the same time.
The worst case scenario is that your Mac is actually failing, it does happen, your best bet is to get a specialist to look at it.
I'm sorry you haven't been helped here but you must understand that the community can only help with problems they have answers to.
Maybe you are looking for
-
What login name do I need to use for iCloud?
I'm operating on Windows 7 64bit. I just installed iCloud and it prompted me to "Sign in with my Apple ID:" which I did. Then I get this: "This Apple ID is valid but is not an iCloud account" - I am using a gmail address. What domain do I need to be
-
Hi, Through my PL/SQL code for Download To Excel functionality, If fetch record count is more than 2k then sometime I get below mentioned error: ORA-22288: file or LOB operation FILEOPEN failed No such file or directory ORA-06512: at "SYS.DBMS_LOB",
-
Every time I eject my Ipod from ITunes 7, it erases everything
Every time I eject my ipod (with clickwheel) from ITunes 7 after updating, it takes a long time, and then when it finally ejects, all my songs are erased from the ipod. When I reconnect to my iBook, I have to restore the ipod... every time! After the
-
Pipeline function syntax issues
What am I doing wrong: I get an error on pipe row (l_var) says "of wrong type" This code is just like the code from here: http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:4447489221109 sqlplus >create or replace type mytesttype as
-
Comment Box in Web Dynpro Screen
Hi Friends, We have developed a portal using webdynpro. Where we need to bring user comments from ECC, which are provided through java portal. Please suggest me in designing comment box(Feedback long text) and displaying the data. Which UI_element I