Im trying to switch computers

im trying to switch my ipod over from another computer but when i get on my other computer i cant sign in to itunes but on the other computer it does

    Hi abbyhill!
Lets get your iPhone reactivated! You can begin the activation by logging into vzw.com/myverizon or by dialing *228 SEND and listening for the steps! Keep in mind, your Nexus will need to be powered off in order for activation to go through quickly. Keep me posted!
Thanks,
AdamE_VZW
Follow us on Twitter @VZWSupport

Similar Messages

  • Trying To Switch To Case Sensitive

    I'm trying to switch to a case sensitive file system. My install disks are at work and I'm lazy, so I tried to use the disks for my roommate's MacBook Pro (I have a white MacBook) and it didn't work -- it admonishes me that "Mac OS X can not be installed on this computer." What's the deal? Do certain Leopard disks only work with certain computers, or do I have a big problem?

    This is correct. Only the retail version of the OS will work on all machines that meet the OS's system requirements.
    Message was edited by: Sagesse

  • I downloaded an update from creative suite 5.5. to 6.0 and then switched computers for a few months. looks like all of the applications have not disappeared. maybe a trial was uploaded instead of the actual updates? anyway, i just want to get the applicat

    i downloaded an update from creative suite 5.5. to 6.0 and then switched computers for a few months. now I am back using the original computer and it looks like all of those Adobe applications (both 5.5 and 6.0) have disappeared. Maybe a "trial" was uploaded instead of the actual updates? Anyway, i just want to get the applications back onto my computer. i tried to enter the serial numbers on my original packaging but systems side error message from Adobe says they were already "redeemed" (which makes sense bc I already downloaded the updates. Apparently there is no phone customer service for Creative Suite anymore. ARRGGG. Any and all suggestions welcome!
    -Michele

    there is no update from 5.5. to 6.0.
    you could have upgraded from 5.5 to 6.0, but you would know that because you paid money.
    assuming you paid no money for a 6.0 upgrade, you still have your 5.5 license.  uninstall clean and reinstall 5.5 per http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7
    Lightroom:  5.6| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • I bought a new computer and i'm trying to switch my itunes library over and cant'

    need some help, i'm trying to switch my library over to a new laptop. tried to "share" both computers. it works on the old one and shows the "sharing" line on the left side. but when i turn sharing on to the new computer it says that "sharing" is on but doesn't show it on the left hand side. does that make any sense to anyone?????

    Where are my iTunes files located?
    How to use your iPod to move your music to a new computer
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    iTunes: How to move your music to a new computer

  • Switched computers, lost my games.

    Hello. I recently switched computers, and I copied the iTunes Library and iPod games data files into the system file for iTunes. I also placed a game I'd bought "peggle" into the iPod Games folder. When I loaded iTunes, all my songs and videos were in their respective libraries. So was Peggle in Applications. I synced my iPod as usual, and when I went into the games folder, alas, no peggle. I tried removing it from the library and putting it back in, then re-syncing.iTunes THINKS it's in the library, but on my iPod, it isn't. I've set it to sync all games, and I also tried manually selecting it to be put on my iPod. No luck. I'm not sure where to go from here, as I don't want to use up the license by installing, uninstalling. I also don't want to re-buy it. I have a 6G iPod Classic, and would appreciate any help. Thanks.

    I just needed to authorize my account on this computer.

  • Trying to switch to kde but...

    So I'm trying to switch to kde not because I dislike gnome but because I'm curious about kde.  So far I've had a few issues that keep me going back to gnome where I haven't even had to deal with this problems.
    I have a Thinkpad X201 which is a small laptop (12.1 inch screen).  When I get to work I dock and close the lid and use a 21 inch screen.  The laptop screen is off.  When I un-dock it, it seamlessly switches back to the laptop screen.  I didn't have to do anything to get this to work in gnome other than set it up under the display settings.  KDE, I have to configure it on each boot, and it seems a little buggy sometimes (as in it doesn't do the same thing each time even though I go through the same proceedure, like the laptop monitor says even when I say to disable it, until I re-enable it and disable it a second time).  It doesn't always happen but it does sometimes.  I know I can default it to one setting but when I un-dock it or reboot it with the external monitor as default it doesn't go back to the laptop display like gnome does (which mean I don't get a screen on my laptop to switch it back to the laptop).  I went through the intel/xorg/kde wiki's and either I missed it or it doesn't really say anything about my situation.  I saw the multi-monitor settings for xorg and tried it but it did nothing.
    This alone make kde not an option as I'm constantly going back and forth from docked to un-docked and can't keep manually switching display settings.
    Also, I tried my vm's in virtualbox and it complained as I started the vm that it was configured for 32 color but that kde is set to 24 bit.  I see no settings to change it in kde and forcing it with an xorg config file does not take.  How do I change it to 32bit color?
    Some of the other quirks I can sort of deal with (clock size, qt/gtk integration, others) but those above will keep me gnome until they can be solved.
    $ lspci
    00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02)
    00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02)
    00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
    00:19.0 Ethernet controller: Intel Corporation 82577LM Gigabit Network Connection (rev 06)
    00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
    00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06)
    00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06)
    00:1c.3 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 (rev 06)
    00:1c.4 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 (rev 06)
    00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
    00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a6)
    00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 06)
    00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller (rev 06)
    00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 06)
    00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 06)
    02:00.0 Network controller: Intel Corporation Centrino Advanced-N 6200 (rev 35)
    ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02)
    ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02)
    ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02)
    ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02)
    ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02)
    ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02)

    The problem I'm having is more extreme than yours but possibly related. (There's a thread here somewhere and a forum thread on the KDE site.) I need to sit down and try to recreate the issue in my office.
    Apart from the configure-every-time on connect and configure-twice on disconnect, I also tend to find I lose all display on disconnect (not immediately but shortly after). Either ll display for X or all display period.
    It is probably the biggest issue I have right now (apart from the new kernels - but the lts one works great).
    Possibly related:
    https://bugs.kde.org/show_bug.cgi?id=291819
    https://bbs.archlinux.org/viewtopic.php … 0#p1079700
    http://forum.kde.org/viewtopic.php?f=22&t=101058
    There are some other bugs/threads on the KDE sites if you search...

  • I am trying to switch laptops with my mom, and successfully wiped mine and restored it, but now her password won't allow her into my computer, even though it says it's her account. Is there any way to bypass the password screen?

    I am trying to switch laptops with my mom, and successfully wiped mine and restored it, but now the password that she used on her computer isn't working on this computer. Is there any logical reason why the two passwords would be different, if I restored her information from a Time Machine backup? Aditionally, Is there a way to bypass the password page on startup to make a password that my mom knows?

    If Disk Warrior does not work you can try the following steps (but they may not work if the disk has a hardware error).
    Get the disk (DVD or CD) that came with the system (since you have it listed as 10.6.8).  If it is 10.7 or 10.8 use the Recovery partition to boot from or the USB installer if you have that option.
    Insert the disk then power down
    HOLDING the C key, power up to boot from the disc.
    Get to Disk Utility
    If Disk Utility will now show your hard drive, use DU to REPAIR the disk.
    When it completes the Repair process successfully as indicated in DU, do a shut down.  If Repair is not successful then an different course of action is indicated below.
    Then HOLDING THE APPLE (or Command key depending on your keyboard) KEY AND THE OPTION KEY AND THE LETTER P AND R KEYS, continue hiolding them until you hear the chime tone for the THIRD time then release all four keys.
    If REPAIR is not successful, use the Install disc as a boot and REINSTALL THE OS X OPERATING SYSTEM  DO NOT ERASE THE DISK OR VOLUME FIRST.  REPEAT DO NOT erase the disk or volume before trying to reinstall the OS X operating system.  After re-installing the OS do a software update.  Note that ERASING the disk is NOT required to do an OS re-install.  This allows your existing data and application files to remain.
    If that fails then you are down to the "bitter end" of erasing the volume and reinstalling the OS and then all the other software.
    If erasing the Volume fails then your last hope is to completely erase the entire hard drive, repartion the disk  and try a re-install.
    If that fasils then you may have a defective hard disk.

  • When I was talking on phone, suddenly the phone was switched off. i tried to switch it on but it gave the message....connect to itunes for set up.  when I connected it to itunes...it gave the message, itunes can not read data from this iphone, restore it

    when I was talking on phone, suddenly the phone was switched off.
    i tried to switch it on but it gave the message....connect to itunes for set up.
    when I connected it to itunes...it gave the message, itunes can not read data from this iphone, restore it to factory settings. It also said while restoring ypu will lose all media data but you can restore the contacts.
    I restored the factory settings....the phone was on recovery mode...it was verified by itunes and all that..but in the end it again said that iphone has some problem and can not function right now.
    after that when ever i connect it with itunes, it gives the message, it can not activate the iphone further, try again later or contact customer service.
    What to do now?????? Customer service people say..it is hardware problem

    If it's a hardware problem, then the phone will need to be replaced.
    There is no magic that can fix a hardware problem.

  • Hi, I activated my CS6 in 2012 under my student licence and still using it. I've heard that you can't run CS6 on multiple computers. How do I transfer it from one computer to another as I am switching computers?

    Hi, I activated my CS6 in 2012 under my student licence and still using it. I've heard that you can't run CS6 on multiple computers. How do I transfer it from one computer to another as I am switching computers?

    Hi,
    first, I'm not Adobe's "slave" as you might to accuse me. Most of the posters here are users like me.
    I only can repeat that what I found in Adobe's help sites, as I wrote above. You are free to figure out the "real" truth and - the best would be - you may contact Adobe directly, here are - I'm sure you know them -  the links I would use: http://helpx.adobe.com/support.html  and http://helpx.adobe.com/contact.html.
    Hans-Günter

  • HT5621 When I got my new iPhone and was trying to switch everything over I accidentally set up a new icloud account with one email and had one on my old iphone with another account. Does anyone know how I can merge the two accounts?

    When I got my new iPhone and was trying to switch everything over I accidentally set up a new icloud account with one email and had one on my old iphone with another account. Does anyone know how I can merge the two accounts?

    You cannot merge Apple IDs but you can go to Settings > iCloud and 'Delete Account'.  When prompted to turn off documents and data, choose the only option which is Delete from my iPhone, but on the other prompt for Contacts, Calendars, etc you can choose 'Keep on my iPhone'  Then once the Account is Deleted form the iPhone, log back in with the correct Apple ID and choose Merge when prompted.  This will merge your data from this iPhone with that iCloud account effectively putting your devices on the same account.

  • Just got my new iPhone4, can't get the ringers to play. Yes, I've tried the switch on the side... HELP!

    Just pulled my iPhone 4 out of the box, I'm trying to set the ring tones and I can't preview them and I can't hear it when the phone rings, only vibrates.
    I've tried the switch on the side and from what I've read, there should be a little bell icon at the top; it's not there.
    I'm so frustrated with this. Can someone please help me?

    try restarting the phone and see if anything changes.
    Restart iPhone: Hold down the Sleep/Wake button and the home button together until the apple logo appears then let both buttons go and wait for the phone to restart.

  • I switched computers and need to download Acrobat 9 Standard and I can't find it

    I switched computers and need to download Acrobat 9 Standard and I can't find it anywhere. Does anyone know how to find it?  I have a serial number -- oi just want to download it!

    Hi Jim8008,
    Please try to download Acrobat 9 Standard setup from the below link.
    https://files.acrobat.com/a/preview/8d640488-4a92-4f7d-b50b-d8eb7f96bff8
    Regards,
    Anand

  • Trying to switch from JDBC URL - JDBC DataSource

    I have built and run a JHeadstart 10.1.2 application using JDBC URL defined database connections.
    I am now trying to switch to use JDBC DataSource definitions to make the database connection independant from the application so that the same ear file can be deployed to different application servers (dev vs test environments).
    I have tried changing the Connection Type of the Business Component:
    Configurations > Edit > Connection Type
    from the previously defined JDBC URL to a JDBC Datasource defined within the embedded OC4j Application server. After making the change, rebuilding and restarting the server it still retrieves information from the previously defined URL.
    Is there something I need to regenerate/rebuild/reconfigure?
    Thanks,
    Kevin

    Hi Steven,
    I've seen that article. It's quite detailed and certainly helped until I ran into a VerifyError something like:
    java.lang.VerifyError: (class: oracle/ord/im/OrdDocBase, method: create signature: (Loracle/ord/im/OrdDocBase;Loracle/sql/Datum;I)Loracle/sql/CustomDatum;) Incompatible object argument for function call at java.lang.Class.forName0(Native Method) at java.lang.Class.forName(Class.java:140) at oracle.jheadstart.util.BindingUtils.class$(BindingUtils.java:66) at oracle.jheadstart.util.BindingUtils.isIntermediaBinding(BindingUtils.java:169) at oracle.jheadstart.controller.strutsadf.action.JhsDataAction.setBindingInputHandlers(JhsDataAction.java:1159) at oracle.jheadstart.controller.strutsadf.action.JhsDataAction.processUpdateModel(JhsDataAction.java:622) at oracle.adf.controller.struts.actions.DataAction.processUpdateModel(DataAction.java:508) at oracle.adf.controller.lifecycle.PageLifecycle.handleLifecycle(PageLifecycle.java:112)
    I found this forum posting helped me...
    Re: JHeadstart Deployment Issue
    I couldn't run the application in a standalone instance of oc4j 9.0.4 even after following the deployment instructions found in this and other posts. It wasn't until I came upon a JavaWorld article from 2001 about VerifyError...
    http://www.javaworld.com/javaworld/jw-06-2001/jw-0615-howto.html
    I added -noverify to the startup arguments and the application ran fine.
    I admit I am a little concerned that I need to run without jar verification. Have you seen this before? Is there another way to deal with this?
    thanks,
    Kevin

  • When I switched computers my songs now cut off and don't play out.  How can I get my songs back to play fully that I purchased from ITunes over the past years?

    When I switched computers my songs now cut off and don't play out.  How can I get my songs back to play fully that I purchased from ITunes over the past years?

    Other people have been having similar problems with songs over the last few days, I assume that there has been a problem with Apple's servers.
    Depending upon what country that you are in (music can't be re-downloaded in all countries) then try deleting those tracks from your iTunes library and redownload them via the Purchased link under Quick Links on the right-hand side of the iTunes store home page on your computer's iTunes : re-downloading.
    If you aren't in a country where you can re-download music or if they re-download in the same state then try the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via Store > View My Account and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find those songs and use the 'Report a Problem' link.

  • Hi I Have A Prepaid SmartPhone Right Now With Verizon For About 7-Months So Far. I Have Always Paid On Time No Missed Payments Good Standing Account, I Tried To Switch Over To A 2-Year Contract With Verizon And They Wanted A $400 Deposit For Only 1-Line.

    Hi I Have A Prepaid Smart Phone Right Now With Verizon For About 7-Months So Far. I Have Always Paid On Time No Missed Payments Good Standing Account, I Tried To Switch Over To A 2-Year Contract With Verizon And They Wanted A $400 Deposit For Only 1-Line. Is There Anyway I Can Use My Excellent Payment History With There Prepaid Department To Switch To A 2-Year Contract And Not Have To Pay The $400 Deposit. And This Is Due To The Fact I Have No Credit History Whatsoever

    Since you have no credit history, my guess is you would need at least a year of on time payments, and I'm not sure a pre-paid account would qualify as you can stop at any time. 
    You didn't specify your age, but getting started int he credit world is not easy - you may try applying for a gas card, or a credit card, and USE them, pay them off each month - and expect to take a year or more to establish a record. 

Maybe you are looking for