Im trying to use magic bullet photo looks with photoshop CC and everytime i use photolooks photoshop crashes and closes

If Photoshop runs OK otherwise, then the problem is with the plugin
Red Giant - Products - Magic Bullet PhotoLooks 2.0 - Compatibility

Similar Messages

I just updated to new final cut pro x 10.1.1 and i am also on mavericks so but on my editing timeline i was trying to color grade using magic bullet looks but i am having problem with it. when it comes back to tcp x it's black.

I just updated to the new final cut pro x 10.1.1 and i am also on mavericks so but on my editing timeline i was trying to color grade using magic bullet looks but i am having problem with it. When i send a sample to MBL and color grade it , it comes back to final cut pro x all black even after render. By the way on the MBL i am using the GPU rendering, I used before like 4months ago and it was fine. And i don't like to use the CPU because it very slow.

What is the frame rate of the project? At what frame rate was the media recorded? What frame size?
What are the audio settings?
What are the specs of the machine, in particular how much RAM, how is the hard drive connected, etc.?
If possible, post screenshots of the inspector for the project.
It could be related to the audio frequency?

I am not able to use Magic Bullet Looks with the After Effects trial

Jeff,
I am having troubles with downloading a trial. I am currently trying to find ways to edit videos using Magic Bullet Looks. I have found many ways, but when I go to download the Magic Bullet looks, it says After Effects cs6. For some reason it does not install even though I have the trial version of After Effects. So when I open After Effects, and go to the effects tab, it does not show up. I have looked on tutorials and many other ways.
I also tried downloading the trial of After Effects at, http://prodesigntools.com/adobe-cs6-direct-download-links.htmlrfer
Please Help,
- jhsurfer

If you're having difficulty installing or using Magic Bullet Looks, then I recommend asking the folks who make that plug-in, Red Giant:
http://www.redgiant.com/products/all/magic-bullet-looks/

Photoshop crash when i use Magic Bullet Looks

Hello, good, I need help because I have been dating a message to start photoshop, which tells me card graphics is not supported, and attempting to open a plugin, such as Magic Bullet Looks, to put ok, shut me photoshop, and this had not happened to me before, what can i do?
i have WIN 7
Intel core (TM) i7 2.00 GHz
6 gb of ram
64 bits

I did a quick google search for "Magic Bullet Looks plugin" The first one I found does not even seen to be a Photoshop Plug-in Is this the plug-in your trying to use in Photoshop? Seems to be for video editing software. Photoshop can do limited video editing but is not listed as supported by this plugin.
Red Giant - Products - Magic Bullet Quick Looks Free 1.4
System Requirements
Quick Looks Free works with:
Adobe After Effects CC, CS6, CS5.5, CS5
Adobe Premiere Pro CC, CS6, CS5.5, CS5
Apple Final Cut Pro 6, 7

When ever i try to use magic bullet looks it says that it could not complete the command because of a problem with the filter module interface what do i do to fix that please help

i dont know what the problem is everything else works my photoshop runs really well its just when i try to use magic bullet looks then it gives me the error message

Contact Red Giant and see if they have an update to the plugin that fixes the bugs in the plugin that are preventing it from working correctly.

Blue Screen When using Magic Bullet Instant HD in Premiere Pro CC

When using Adobe Premiere Pro CC, using Magic Bullet Instant HD to convert a 720p video to a 1080p. The system will blue screen and the problem dll file seems to be hal.dll.
What is the cause of this?
and how to fix it?
System Specs:
OS: Win 7 Ultimate 64 bit
CPU: i7 3770k 3.5 Ghz
RAM: 16 GB
GRAPHICS: AMD Radeon HD 7700
MOTHERBOARD: ASRock Z77 Extreme6
STORAGE: 1 TB local disk, 3 2TB Expanded driver attached to 3.0 port
Wireless mouse and keyboard

Hi Kris,
I have checked all the three dumps, they all showed the same bugcheck 124.
* Bugcheck Analysis *
Use !analyze -v to get detailed debugging information.
BugCheck 124, {0, fffffa8010821028, be200000, 21136}
Probably caused by : GenuineIntel
Followup: MachineOwner
6: kd> !analyze -v
* Bugcheck Analysis *
WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.
Arguments:
Arg1: 0000000000000000, Machine Check Exception
Arg2: fffffa8010821028, Address of the WHEA_ERROR_RECORD structure.
Arg3: 00000000be200000, High order 32-bits of the MCi_STATUS value.
Arg4: 0000000000021136, Low order 32-bits of the MCi_STATUS value.
Debugging Details:
BUGCHECK_STR: 0x124_GenuineIntel
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
PROCESS_NAME: Adobe Premiere
CURRENT_IRQL: f
ANALYSIS_VERSION: 6.3.9600.16384 (debuggers(dbg).130821-1623) amd64fre
STACK_TEXT:
fffff880`0350ab58 fffff800`03413a3b : 00000000`00000124 00000000`00000000 fffffa80`10821028 00000000`be200000 : nt!KeBugCheckEx
fffff880`0350ab60 fffff800`035d6463 : 00000000`00000001 fffffa80`10817950 00000000`00000000 fffffa80`108179a0 : hal!HalBugCheckSystem+0x1e3
fffff880`0350aba0 fffff800`03413700 : 00000000`00000728 fffffa80`10817950 fffff880`0350af30 fffff880`0350af00 : nt!WheaReportHwError+0x263
fffff880`0350ac00 fffff800`03413052 : fffffa80`10817950 fffff880`0350af30 fffffa80`10817950 00000000`00000000 : hal!HalpMcaReportError+0x4c
fffff880`0350ad50 fffff800`03412f0d : 00000000`00000008 00000000`00000001 fffff880`0350afb0 00000000`00000000 : hal!HalpMceHandler+0x9e
fffff880`0350ad90 fffff800`03406e88 : 000007ff`fda7f140 00000000`00000b40 00000000`00000000 00000000`00000000 : hal!HalpMceHandlerWithRendezvous+0x55
fffff880`0350adc0 fffff800`034be4ac : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : hal!HalHandleMcheck+0x40
fffff880`0350adf0 fffff800`034be313 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KxMcheckAbort+0x6c
fffff880`0350af30 00000000`0352f2c9 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiMcheckAbort+0x153
00000000`36c0cdd0 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x352f2c9
STACK_COMMAND: kb
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: GenuineIntel
IMAGE_NAME: GenuineIntel
DEBUG_FLR_IMAGE_TIMESTAMP: 0
IMAGE_VERSION:
FAILURE_BUCKET_ID: X64_0x124_GenuineIntel_PROCESSOR_CACHE
BUCKET_ID: X64_0x124_GenuineIntel_PROCESSOR_CACHE
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:x64_0x124_genuineintel_processor_cache
FAILURE_ID_HASH: {270f58cb-a20a-a72d-6d81-eb8c82f01f7a}
Followup: MachineOwner
Information for Bugcheck 124:
Bug Check 0x124: WHEA_UNCORRECTABLE_ERROR.
Bugcheck 124, This bug check indicates that a fatal hardware error has occurred. This bug check uses the error data that is provided by the Windows Hardware Error Architecture (WHEA).
Which is probably caused by "GenuineIntel". Make sure we have updated the BIOS drivers, take a check with the hardware tool provided by the manufacturer, or you may take a check with them.
Best regards
Michael Shao
TechNet Community Support

I am trying to print a color photo on my MacBook Pro from iPhoto (not using Photoshop) using Epson 2200 printer, and everything I do in the Color Matching and Print Settings results in a photo with a pink cast to it. What am I doing wrong?

I am trying to print a color photo on my MacBook Pro from iPhoto (not using Photoshop) using Epson 2200 printer, and everything I do in the Color Matching and Print Settings results in a photo with a pink cast to it. What am I doing wrong?

Have you checked the ink cartridges and made sure the nozzles are clear? Are you able to print from outside of iPhoto with the correct color?
Try the following: make temporary copy of the library and do the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home()/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home()/Library/Caches/com.apple.iPhoto folder.
3 - launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
OT

Magic Bullet Movie Looks プラグイン

今、Magic Bullet　Movie Looks　プラグイン　をダウンロードして、インストールし、プロジェクトを開いて、その効果を試そうとしたのですが、
プロシージャ　エントリ　ポイント　?npos@?$basic_string@DV?$char_traits@std@@V?$allocator@D@2@@2IB がダイナミック　リンク　ライブラリ　Look Suite.win.dll　から見つかりませんでした。
という　エラーが出てしまい、使用出来ません。なにぶんパソコン素人な者で、どう対処したらよいのか分かりません。
どなたか　分かる方がいらっしゃいましたら　教えていただけませんでしょうか？
よろしくお願いいたします。
使用している　パソコンはWinXPで、Premiere Pro1.0 です。
ハードディスクを2つ使用していて、プレミアのソフトはCドライブ、プロジェクトなど素材はDドライブに入れています。

6月15日のgiggsさんの質問で、magic bullet movie looksの使い方
の　書き込みを参考に操作したところ、私の問題も解決できました！
手順は　enthusiast さんの指示通りのところにファイルがあり、それを　plug-ins のところに投入したところ、問題なく使用することが出来ました！
giggsさん・enthusiastさん！
参考にさせていただきました。ありがとうございました(@^^)/‾‾‾

HT4236 I've been using the iCloud Photo Stream with my PC for few months already. It work fine every time, but suddenly not work for today

I've been using the iCloud Photo Stream with my PC for few months already. It work fine every time, but suddenly not work for today

Hey lalitgupta,
Thanks for the question. The following article provides troubleshooting steps for Photo Stream:
iCloud: Photo Stream troubleshooting
http://support.apple.com/kb/TS3989
Thanks,
Matt M.

I just download and install itunes 10.5 and it worked good the first days but since yesterday it crashed up, and everytime i start it it crashes again and logged me out each time. it can´t acces my itunes account. I´m using snow leopard the last version.

I just download and install itunes 10.5 and it worked good the first days but since yesterday it crashed up, and everytime i start it it crashes again and logged me out each time. it can´t acces my itunes account. I´m using snow leopard the last version. What can i do to solve this problem and and continue using my itunes normally?

Try doing it in a WIndows Safe mode - Restart computer and hit F8 key right after your see BIOS check and choose "Safe mode with networking"
Do the SFC /SCANNOW again.
If that does not work, whilst in safe mode, download Free Malwarebyte software from CNET's Download.com. Install, update virus definition then perform a full scan. Remove if it did find some viruses or trojans. Restart computer.
Back to regular windows, do the SFC /SCANNOW again.
If that doesnot work, check to see if your Hard drive has errors or bad sectors
GO START BUTTON /COMPUTER, right mouse click OS (C:) and choose "Properties"
Choose "Tools" tab and under error checking, click "Check Now".
Make sure "Scan for and attempt recovery of bad sectors" is checked and click start.
Restart windows will perform the above task to fix errors This may take hours depends on how big is your Hard Drive
Good Luck!!.

I'm using firefox 1.0.6 on a Mac OSX 10.3. Firefox is crashing and freezing frequently. I've heard that My firefox version is too old to update and I also need a new computer. What can I do? Thanks.

I'm using firefox 1.0.6 on a Mac OSX 10.3. Firefox is crashing and freezing frequently. I've heard that My firefox version is too old to update and I should get a new computer. I can't upload art to my website. News articles freeze constantly. Firefox shuts down when I go to certain websites. What can I do? Thanks.

I'm using firefox 1.0.6 on a Mac OSX 10.3. Firefox is crashing and freezing frequently. I've heard that My firefox version is too old to update and I should get a new computer. I can't upload art to my website. News articles freeze constantly. Firefox shuts down when I go to certain websites. What can I do? Thanks.

FCP Crashes while using Magic Bullet Looks

Hi All,
We have recently installed Magic Bullet Looks onto our main edit machine. However, using it causes FCP to crash with really annoying regularity. It seems to be related to either auto save or thumbnails (opening a sequence with Looks applied and it will crash while loading the thumbnails onto the timeline for example - that could be a coincidence as it crashes in many other situations as well but always when working with MBL))
I've tried the usual preference trashing things but can't stop it happening. Anyone had any similar issues that they've been able to resolve? We aren't yet running Snow Leopard but I may try that as a potential solution.
If it matters - the machine is dual 3.2 quad core with 6GB of RAM running FCP 7. It also has a Blackmagic Extreme card (tried turning external video off - no difference)
All thoughts greatly appreciated,
Regards and a happy new year to all,
Richard

Couldn't agree more Jim - hence why I'm not using Snow Leopard yet as I had a nightmare in the early adoption of an older operating system. As for MBL, there seem to be many using it without problems so I don't think it's an issue with the product per say and it really is a very good plug-in. (That view will change to excellent once the problems go away) I just need to get to the bottom of which square peg is destined for which round hole and I'm hopeful that all will be well. I've also submitted a support question to Magic Bullet so will update if I get a solution. I like the CleanApp idea. I'll try that as well. (and I may even give Snow Leopard a go!)
R

Black line appearing when using Magic Bullet

I have installed the latest Magic Bullet suite and it all works fine within Premiere, except when I apply a Look. In the Looks Builder the image looks fine. However, when I go back to Premiere a black line appears on the left hand side of the image. In the Effects Control if I click on 'Motion' or the effect itself, 'Looks', then the black line disappears, but it then reappears when I click off or try and render the image. It is unclear whether the error is in Premiere or with Magic Bullet. I am working with HDV widescreen footage. Any advice would be greatly appreciated.

Make sure that the properties for LooksBuilder.exe are set to run in Windows XP (Service Pack 2) compatibility mode. It may help. If not, provide a lot more details and start with the 16 questions at the end of the included Wiki link:
Some suggestions

What device can I use to transfer photos from Iphone5s. Don't want to use my computer.

What external device besides my computer can I use to transfer photos from
my Iphone 5s. Do I have to transfer to my computer and then external device?

Normally the transfer is to your computer, treating the phone as a digital camera. However, you can also enable Photo Sharing. Or use Box.com or Dropbox. Or a 3rd party app such as MyPics that can save them to a Google Picasa site, or Shutterfly that can save them to Shutterfly albums.

Can you print from an iPad 2 using 3G in a home with no computer or wifi by using an iPhone 5 hot spot connection if the printer has been set up in another place with live wifi? I know this question is loaded but my dad lives in a rural area

Can you print from an iPad 2 using 3G in a home with no other computer or wifi by using an iPhone 5 hot spot connection if the printer has been set up in another place with live wifi? I know this question is loaded but my dad lives in a rural area and is wanting a printer to use occasionally. He doesn't want to deal with a computer and I keep his iPad updated for him at my home. Please shed some light on this for us PLEASE. Thanks

In that case, it should be possible. I haven't tried this directly, but I believe it should work.
You'll need to get an actual AirPrint compatible Printer.
Check here for a list of Printers you can choose from.
http://support.apple.com/kb/ht4356
Once you have the compatible printer, using the Hotspot feature from the iPhone he'll have to create the Wifi bubble form the iPhone, and connect the Printer to that Wifi network.
Then connect the iPad to that same Wifi network provided by the iPhone. When all that is done, the printer should appear in any of the Apps that can Print under the Action Arrow button.
For instance in email, pressing the action arrow should show a Print option. In there the printer should appear.
Alternatively you can simply buy a wireless router and setup the network through there even if there is no internet attached. Connect the wireless printer to the router network, and connect the iPad or iPhone to that same wifi network to print.

Im trying to use magic bullet photo looks with photoshop CC and everytime i use photolooks photoshop crashes and closes

Similar Messages

Maybe you are looking for