IMac 2013 and Windows 8.1 Connectivity

Up until I installed Yosemite, I could connect my new Windows 8.1 computer to my iMac external hard drives. ( I have 5 of them hooked up to the iMac) and could access all of my files.) without a problem. Now I can't access not 1 one of them. I can get into the iMac from the Windows computer and see the hard drives, but as soon as I click the hard drives the green line runs across the screen and none of my files appear. I have gone into the settings to make sure I have sharing turned on and everything seems to look ok. I have searched the boards and haven't found an answer or maybe I have over looked one. Is there anyone out there who has some insight to my problem? Thanks in advance. Dave.

Hi,
What error did you exactly get? What does "it won't work" mean?
If you can't setup the account, let me know in which step you have the problem.
If you can setup the account successfully, is the issue that you can't send/receive emails?
I need to know the details above in order to provide further assistance.
We can use Remote Connectivity Analyzer to test if there's any connection issue:
https://testconnectivity.microsoft.com/
If you are sure that your account has been configured correctly, we can create a new profile to have a try:
http://support.microsoft.com/kb/829918/en-us
Let me know if I misunderstood anything.
Regards,
Melon Chen
TechNet Community Support

Similar Messages

I have a partition on my IMac disk and Windows 7 loaded on one partition. I tried to open and W7 will not open and cannot repair itself. Is there a diagnostic/disk repair from Apple that I can try before reloading W7?

I have a partition on my IMac disk and Windows 7 loaded on one partition. I tried to open and W7 will not open and cannot repair itself. Is there a diagnostic/disk repair from Apple that I can try before reloading W7?

Csound1 What Ive been trying to explain is that I have been running bootcamp, I open the app where the first screen is the introduction, i hit continue, the first time I select "download the latest windows support software fromm Apple" then I return and instead select "Install Windows 7." Then hit continue. The third screen is where I "Create a Partition for Windows" I set Windows to 80 gigs then hit INSTALL. As stated before Bootcamp cannot find the install drivers saying "The installer disc could not be found." My windows software is on a USB drive not a disc, I tried using a virtual disc reader to make it appear that the windows software was running on a disc, still no luck. What I would like to know is how to install windows on bootcamp.

MDT 2013 and Windows Embedded Standard 7

Hi Guys
I'm currently working on a Windows Embedded 7 Standard build and deployment.
Looking at the support Matrix and the video from Johan, it looks like:
MDT 2010 has support with the hacked LTIAPPLY script
MDT 2012 onwards support Embedded POS Ready - no mention of Standard.
Can you clarify:
If WES7 is supported in MDT 2013.
Is there a set of specific task sequence steps I should use for deploying WES7? I will still need to run the standard pre-install to clean disk, gather vars etc.
I have written some post build scripts, which configures the FBWF state and installs final apps, which i'll run at the State Restore phase.
Many Thanks
Ian Fraser

Can you share your experience with MDT 2013 and Windows 7 Embedded? Are you deploying the SCCM client to the clients? Any scripts you can post would be helpful.

IMac 2013 and PC via Thunderbolt in TDM

Hi all,
today I do have an IMAC 2010 connecte to a PC via a display port cable.
This works fine and is a perfect solution to limit the space used on the Desk.
So now I am planning to move on to an IMAC 2013. As those new models do no longer supply a display port and do only support the target display mode through thunderbolt, I also need to change the mainboard in the PC. I want to continue to use the PC as my gaming machine. A MAC simply doesn't deliver the Grafix power for gaming.
So doing some research in the WEB I didn't get a clear message if anybody has a working setup with e PC connected to a new iMAC in target display mode. It sounds like the MAC in incompatible and simply accepts only macbooks or Mac mini as client. If this is really the case I am srewed up and I need to question my investments in the Apple eco-system.
Is there anybody out in the world who is successfully using a PC connected to an iMac in TDM?

I've now tried another Brand new Apple Thunderbolt cable, and it still does not work.
Having spent Hours trawling the Web I've decided to give up :-(. I've only seen one person who claims to have connected with a PC, and that was 2 Years ago. There are countless others who have failed....
It seems that even a Macbook Pro running Windows with Bootcamp cannot connect via TDM, even though the same machine running OSX will work fine.
It seems Apple don't want this to work :-(. This seems strange as older DisplayPort iMacs are known to work fine with PC's, PS3's, Xbox's etc. using HDMI and DVI adapters.
I'm regretting recently upgrading to this 2013 model now...
Tim

Cck, ipad and windows 7. no connection. help, urgent...

hi
I recently got a CCK. and it won't connect to windows7 anymore (64, up-to-date, brand new cck & usb cable)
I tryed once yesterday and it worked (I could send some midi data). but now it's impossible to establish a connection. i didn't install anything between the moment it worked and the moment it didn't anymore. I just turned of the laptop.
the ipad just doesn't show under "directory". I tried disabling the firewall, reinstalling bonjour & rtpmidi. nothing works.
apparently when I plug the ipad something is also supposed to happen on windows (a pop up, the ipad showing somewhere). it is not the case, nothing happens at all.
what could block the ipad+cck to be connected to windows ?
thanks in advance

http://hexler.net/docs/touchosc-configuration-connections-coremidi
glad to make you discover alternative uses of the CCK
anyway :
according to this site windows is suppoed to recognize the ipad (as a usb peripheral) when plugged with the cck
http://www.ipadforums.net/ipad-help/47509-transferring-photos-imported-ipad-my-c omputer-after-using-camera-connection-kit.html
but on my computer it doesn't. nothing happens at all
what could cause this ?

After updating to OSX 10.9.4, WiFi connection keeps getting dropped. This happened on 3 Macs, but my iPhone, iPad, and Windows computer all connect to WiFi just fine.

I recently updated three Macs to Mavericks OS 10.9.4. All three Macs now cannot stay connected to WiFi.
Other devices (iOS and Windows) have no such problem, so it isn't the WiFi itself.
It seems to be OS X 10.9.4 which is the problem.
10.9.3 did not have this problem either.

Troubleshooting Wi-Fi issues in OS X
Wireless Connection Problems - Fix
Wireless Connection Problems - Fix (2)
Wireless Connection Problems - Fix (3)
Wireless Connection Problems - Fix (4)
Wireless Diagnostics - About
Also try turning off Bluetooth

Conflict with WRT160N and Windows Wireless Network Connection

I have a WRT160N router connected to a Verizon FIOS cable modem with five computers (all Windows based) wirelessly connected to the N router. Four of the computers auto detect the N router connection when the computer starts up using Windows Wireless Network Connection and operate well. One of the computers, which is the only one running Easylink for router configuration, will not connect through the Wireless Network Connection. I have to use Easylink to manually connect. The WNC gives a msg that Windows cannot configure this wireless connection and to configure the wireless connection using Wireless Zero Configuration service. When I configure WZC correctly the WNC sees all available networks and allows me to select the Advanced Wireless checkbox to allow Windows to connect to the wireless network. However, when I reboot the computer none of the configuration parameters are saved and I am back to manually connecting using Easylink and going through the entire process again. Any suggestions? Thx

Uninstall the EasyLink and connect manually. I think EasyLink 3.0 or later is coming soon ..
For information on upgrading the firmware on the linksys routers :
http://linksysfirmwares.googlepages.com/upgradingfirmware
For information on wireless security :
http://linksysfirmwares.googlepages.com/wirelesssecurity
C | EH
linksyshelp.blogspot.com

Is iMac, Bootcamp and Windows XP 100% a PC

My friend and his wife own an accounting practice with 4 staff.
They use IRIS Accountancy Practice Software, which itself uses the latest SQL Server technology and Microsoft Windows XP.
He has a PC at home, which his wife uses to work on the office system.
He needs to replace a PC and is attracted to the iMac for home – attractive, space saving, etc.
He is not technical and relies 100% on third party support who also supply his PC’s.
IRIS and the support company say the IRIS software will not run on Apple.
I have tried to persuade them that with an iMac, Bootcamp and Microsoft Windows XP he will be running IRIS on a PC not on an Apple. Am I correct?
Does anybody have experience (good or bad) of such a set up?
Is the iMac with Bootcamp and XP, 100% a PC? This is a business decision and he will not buy the iMac without 100% confidence.

MacBook Pro was rated as one of the top three Vista laptops and supports 64-bit versions.
I think running on Apple meant "doesn't run on PowerPC" actually, and there are programs of course that aren't ported to OS X.
A lot of IT organizations run servers as virtual environment to better use idle resources and lower costs. Apple's Xserve is often used for running Windows 2008 or any other flavor.
You might even want to look at VMware products and run XP inside OS X.
You can't run OS X as a VM except in OS X server, which is a shame, great for testing.
Your iMac is Intel Mac.
Compaq was one of the first, along with a German company, to provide "100% IBM Compatible" ISA hardware. Eventually, it became "PC" rather than the longer name, microprocessor (with mini and mainframe being the other two main architectures).
http://www.xbitlabs.com/articles/mobile/display/apple-macbook-air_7.html
http://www.computerworld.com/action/article.do?command=viewArticleBasic&articleI d=9003111&pageNumber=3
And then there is this story on Apple service and support, that you rarely find with PCs:
http://www.geek.com/the-day-my-macbook-died-20080709/
I've been running Vista now for two years since it went RC1. On Mac Pro.

Verizon email cant connect with outlook 2013, and windows 8

I have have Verizon, Microsoft, Mcafee, and my isp optimum on he phone for a total of 9 hours. all the setting are as dictated by verizon. Any other email account sets up with no issue.
Some setting in verizon had to have changed from the published ones. any ideas

EFisk wrote:
I have have Verizon, Microsoft, Mcafee, and my isp optimum on he phone for a total of 9 hours. all the setting are as dictated by verizon. Any other email account sets up with no issue.
Some setting in verizon had to have changed from the published ones. any ideas
For the sake of example, we are going to pretend that we are setting up fictional account "[email protected]" and the password for logging into that account in webmail is "fakepassword" - Again, this is a fictitious account for the sake of an example.
The settings for using Verizon's servers would be:
Incoming Server: pop.verizon.net
Server Requires Authentication: Yes
Username: fakeacct
Password: fakepassword
Requires a Secure Connection (SSL): Yes
Port: 995
Outgoing Server: smtp.verizon.net
Server Requires Authentication: Yes (You can set it to use the same settings as incoming, or manually enter the username and password.)
Requires a Secure Connection (SSL): Yes
Port: 465
If you are given the option anywhere for Secure Password Authentication (SPA), set it to No or Normal
These settings should work unless you have a Verizon/Yahoo account, in which case the server names are: incoming.yahoo.verizon.net -and- outgoing.yahoo.verizon.net
If all of that is set up and it's still not working, your best bet is to provide a screenshot of your settings (with personal information blocked/removed) and any errors you are getting.
All of that said, your IP may be blocked by Verizon. They had some issues with attacks from overseas and way overcompensated, causing issues for people even on different providers here in the US. Try getting a new public IP address (Optimum should be able to help you with this). I would love to say they're working hard to correct this nonsense, but they're entirely silent on the point since their initial announcement.
Best of luck to you.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
"All knowledge is worth having."

Oracle client 32/64 bit on Crystal Server 2013 and Windows Server 2012

I'm getting the error "Unknown Database Connector Error" when I run report on the server and it works OK on crystal designer 2013.
Been reading this thread 32&64 bit Oracle Client but not much help there.
Here are the details
System
Windows Server 2012
Crystal Server 2013 SP5
Crystal Server has been installed and appears to work fine. I was able to develop a brand new report locally and saved it to the server and it displays ok. Of course when I click on refresh on the report, it will error out due to database connection it looks like.
We have installed both oracle client drivers 64 and 32. 64 was installed first and then 32.The path has been modified so that the 32 shows up first.
I even ensure oracle_home and oracle_home32 are specified and restarted the server. I still get the same error.
The tns entries are also located in both installs of oracle client...
What might be the issue?

Oracle Database Client 12.1.0.2.0 (32-bit and 64-bit installed)
Installation Type: Custom
COMPONENTS INSTALLED:
SQLPLUS
ORACLE NET
We are currently not using an ODBC connection.
We installed Crystal 2013 Server SP05. This is the sole package installed (believe it's the latest version) without any extra patch package installed (believe no patch needed as it's the latest version).

Problems with Outlook 2013 and Windows 8.1 with Exchange 2013

Hello Guys,
I just got started with testing Exchange 2013. My lab consists of 2 Exchange 2013 Servers, the Installation Media is the Exchange 2013 SP1 from MSDN, Server 2012 R2 and 2 Windows 8.1 Clients with Office 2013 SP 1 with all updates installed. I have configured
some mailboxes in Exchange and I want now to configure Outlook. So at the initial startup Outlook displays the correct Name and Mail Address. When I click next I make it to Logging on the mail server and then I am getting the Error : The connection to Microsoft
Exchange is unavailable. Your Network adapter does not have a default Gateway. All servers are in the network 192.168.5.0 /24. Any suggestions how can I fix this problem ?
Thank you

Hi there and thanks for Posting!
You can correct the issue by disabling outlook connection optimism.
Full details can be found from link below.
http://blogs.technet.com/b/rmilne/archive/2014/03/27/outlook-unable-to-connect-to-exchange-_1320_default-gateway-not-found.aspx
Happy Testing :)
Farhad

SharePoint 2013 and Windows authentication (integrated) or SharePoint user for report data source

Hello,
I am having issues creating report datasource in "Windows authentication (integrated) or SharePoint user" in SharePoint 2013. I followed the steps mentioned in the link http://blogs.msdn.com/b/psssql/archive/2014/04/28/sharepoint-adventures-using-claims-with-reporting-services.aspx.
I am just stuck in the delegation piece here. I have a SSAS instance by name "XXXXAPPV01\Multidimensional". First thing is what is the procedure to set SPN for this instance? I need to add this service in the delegation tab so that C2WTS service
configured correctly.
Nothing but I should be able to access my SSAS 2012 cube from SSRS 2012 by "Windows authentication (integrated) or SharePoint user" as the authentication method.
Palash

I used the below command to set SPN for analysis services.
setspn -S MSOLAPSvc.3/XXXXAPPV01APPV01.xxxxdmo.local:Multidimensional xxxxdmo\svcMyService
After setting the SPN for this service account I added this account(xxxxdmo\svcMyService) in the delegation tab of my domain account created earlier for claim service (xxxxdmo\svcC2WTS). Now in service type it shows -> MSOLAPSvc.3, User or Computer it shows
-> XXXXAPPV01APPV01.xxxxdmo.local and in Port it shows -> Multidimensional. This is in my svcC2WTS account delegation tab. Still I am not able to connect datasource by "Windows authentication(integrated) or SharePoint User". I am getting the
same error "Cannot convert claims identity to windows token".
I am not sure what am I missing in this configuration piece yet to get this working.
Palash

Office 2013 and Windows 2008 R2 SP1 AD RMS

Hi All,
I have installed Windows 2008 R2 SP1 AD RMS service, and it works well with Office 2010/2007, does not however work with office 2013, below is the error I get:
sorry, something went wrong opening information rights management protected content. the request is not supported
I have added the AD RMS cluster URL and the AD RMS licensing URL to the loacl Intranet security zone (http://realercheng.wordpress.com/2013/01/23/office-2013-failed-to-create-and-consume-protected-content-with-connect-to-digital-rights-mangement-services-and-get-template/),
however, I still get the same error.
Does Office 2013 work with Windows 2008 AD RMS, and if it does what is the issue here and how do I go about sort it?
KimaniBob

Hi,
Im am using server 2008 r2 sp1 and users are using windows 7 enterprise, office 2010 pro. plus. They can see right policy
template with office 2010.
But now I have installed office 2013 pro. plus and added new admx files to new gpo for office 2013 also enabled this policy
"Enter Permission Policy Default Server for Quick Access Toolbar" and this is writing in the policy \\serverhostname But I cant receiving ad rms templates from my outlook?
Is server 2008 r2 sp1 ad rms compatible with office 2013 or am I have to install server 2012 ad rms for office 2013?
How can I fix this problem?
Thanks.

Sharepoint 2013, Infopath 2013 and SQL List Data Connection

I created one list library in SharePoint 2013
Customized with info path forms 2013 …
External data connection with SQL servicer table
SQL table fields are associated with List fields…
I converted data connection in to UDC file and uploaded in the Data connection Library in SharePoint 2013
I published the list… when I new document I am getting an error …
You do not have permissions to access a database that contains data required for this form to function correctly.
An entry has been added to the Windows event log of the server.
Log ID:5566
Correlation ID:
0bb79b9c-3893-20d2-21e3-d428b2f4e92f
Hai

Hello ,
Please refer below threads .
http://social.msdn.microsoft.com/Forums/en-US/6bead079-4a71-49aa-9c67-ad59069a0ffe/sharepoint-2010-infopath-form-error-you-do-not-have-permissions-to-access-a-database?forum=sharepointcustomizationprevious
http://blogs.technet.com/b/rajbugga/archive/2013/08/07/infopath-over-claims-authentication-sharepoint-2010-amp-2013.aspx
Also I would suggest you to create a simple web service to get and update the data to database . And use that Web service to your DB operations .
Best Regards Kuldeep Verma
Please remember to click "Mark As Answer" if a post solves your problem or "Vote As Helpful" if it was useful.

Printer (Canon Pixma iP6600d) setup help iMac, TC, and Windows XP laptop

So here's my issue: I have my Canon printer connected to my time capsule. It shows up in airport utility as being connected. I have it set up on my iMac (ethernet connection to the TC) as the default printer, and there are no issues. I have a windows XP laptop (work computer) connected via wireless to the internet via the TC (Airport). Bonjour, running on the windows laptop does not see/recognize any available printers when I run the wizard. So, even though it appears to be set up as a shared printer, I can't get to it wirelessly from my PC. Please help!

Open Control Panel > Windows Firewall. If you have the firewall enabled, check that the setting "Don't allow exceptions", located under the General tab, is not enabled.
Also, if the firewall is enabled, click the Exceptions tab and ensure you can see Bonjour in the list and it is enabled (tick in the box).
Actually, as a brief test, you could disable the firewall to see if this is the cause of the printer not appearing. A working PC will show the Airport printer immediately after searching.
PaHu

IMac 2013 and Windows 8.1 Connectivity

Similar Messages

Maybe you are looking for