IMac 24 in internal screen not working - external screen is working.
The model is 2.8 GHz Intel Core 2 Duo.
4GB memory
Serial Number (system): VM826CRLZE7
Chipset Model: NVIDIA GeForce 8800 GS
Type: GPU
Bus: PCIe
PCIe Lane Width: x16
VRAM (Total): 512 MB
Vendor: NVIDIA (0x10de)
Device ID: 0x0609
Revision ID: 0x00a2
ROM Revision: 3234
The graphics card was replaced in October in the Apple Store in Barcelona. Until a couple of weeks ago it was working OK again. Now the display is blank and I can only work on the external monitor I have hooked up to it.
If I turn off the computer over night - it will work for about one or two hours then go blank again. It will come back on again occasionally now and then during the day in a random way - not connected to what I am doing with the computer.
I have zapped the PRAM
If video is available remove display-related preferences:
1. Delete the com.apple.windowserver.plist preferences located at /Library/Preferences/com.apple.windowserver.plist and ~/Library/Preferences/ByHost/com.apple.windowserver.xxxx.plist/
I also did the upgrade to 10.6.7 and it worked for a few hours after that - Longer and I thought it was fixed but no luck. The screen is blank again.
I reset the SMC
Followed the advanced trouble shooting guide at http://support.apple.com/kb/HT1573
I would have expected that the repair I had done in October would last longer than this. It cost a lot to get the job done and they kept the iMac for a month. I need a way to fix this that isn't going to cost me as I am skint now.
Please Help.
Hi,
At first my screen would go black and then sometimes come back on after an minute or half an hour. After a few days it went black and wouldn't come back on at all.
I got my replacement ATI 2600 Pro graphics card from a guy in Hong Kong on ebay.
http://cgi.ebay.co.uk/24-iMac-Early-2008-NVIDIA-GeForce-2600-PRO-Video-/17057901 1278?pt=PCCVideo_TVCards&hash=item27b74d26ce
I got an independant mac repair guy to fix it, I doubt apple would offer to do this job for you without using their parts. You could probably do it yourself if you know how to take the machine apart.
Message was edited by: andydckent
Similar Messages
-
Got HDCP problem on macbook pro screen not even external screen
I have rented a movie (HD) on itunes.
I download it and try to play it, then I have a popup saying that the movie can't be displayed on my screen because of some HDCP restriction.
I don't understand, I've got a mbp retina display, I just try to play the movie on the computer, I did not even plug an external screen.
I am running Mountain Lion 10.8.4, with itunes 11.
I think the most innaceptable is that I did not even have a warning that say that I can't rent the movie, or that I would not be able to read it on my mac.High-bandwidth Digital Content Protection(HDCP; commonly, though incorrectly, referred to as High-Definition Copy(right) Protection) is a form of digital copy protectiondeveloped by Intel Corporation to prevent copying of digital audio and video content as it travels across connections. Types of connections include DisplayPort (DP),Digital Visual Interface (DVI), and High-Definition Multimedia Interface (HDMI), as well as less popular, or now defunct, protocols like Gigabit Video Interface(GVIF) and Unified Display Interface(UDI).
Meaning, someone doesn't want you to be able to play the movie on the screen because of copyright reasons.
Sorry. (I know, DRM sukcs!!) -
Can I use the iMac Screen as an external screen for a PC laptop ?
can I use the iMac Screen as an external screen for a PC laptop ?
iMac- How to use your iMac as a Target Display Mode display
Target Display Mode- Frequently Asked Questions (FAQ)
I am unaware of any PCs that support connection via Target Display Mode. I have never tried it myself, so I don't know if it would work. All you can do is try provided you have an iMac that supports TDM and the proper cable adaptors. -
Can I use my iMac Screen as an external screen for my PC laptop
Can I use my iMac screen as an external screen for my PC laptop ?
Thanks for your reply. After reading the article though, I'm still not really sure what the answer is. For example, you mention something that can be done, with some hurdles to go through, for 27" iMacs. Mine is a 21.5" iMac, but seems to have the same port you mentioned in the article. Or maybe it isn't. Anyway, I'm still not sure if it is possible after reading that. Interesting information though.
doug -
Imac intel internal speakers not working windows8
Imac intel internal speakers not working with windows 8 external and head phones work just fine
Macs don't support Windows 8 at this moment. Wait until Apple launches drivers for that new Windows edition
-
Mac pro will not reconize external speakers. quit working for no reason
mac pro does not reconize external speakers. quit working for no reason
Try an smc reset.
Check Audio MIDI Setup (in Utilities). -
Satellite L30 Vista screen not lit; extrnal monitor only works in Safe Mode
HI,
I have LS30-10S.
first the laptop screen would not light up though I could see a faint ghost of icons etc;
I tried unplugging and holding power button down (battery is long time dead) with intermittent and random success;
I borrowed an external LCD monitor (Lenovo Thinkvision) and that worked fine, and pressing Fn+F5 would actually sometimes bring the laptop screen to life too.
I changed the screen inverter and that seemed to restore the laptop screen, but the next time I rebooted +neither+ screen would work unless I chose safe mode.
Currently I can only use the external screen and only in safe mode.
Has anyone else experienced this?Hi
Just few questions:
Has the external monitor worked properly before you disassembled the notebook and replaced the LCD inverter board?
What happens exactly if you boot the notebook in normal mode?
Did you try to boot the notebook using a Live CD (Win PE or Linux live CD)?
I would also recommend you to check if you new OS installation is possible.
The safe mode is just a test environment and the system does not access all hardware recourses using safe mode.
So theoretically the issue could be related to faulty hardware or system problems. -
Main screen OFF, while External Screen ON
Hi,
How can I turn my iMac's main screen completely OFF, when I'm watching a movie on my external 1080p TV, so the iMac won't dim annoyingly next to it?
please skip "cover with", "set background", "lower brightness", "turn iMac", "crackopen iMac" and "why do you get an iMac if.." answers,
I'd like the main screen absolutely OFF, while the stuff runs on the external screen..
there has to be a solution for this basic function in OSX, it's 4-5 clicks in Windows, but I'm an Apple newbie..
Thanks in advance for your answers!
SteveNo you can not just turn off the iMac's display.
Everyone here in the Forum is a Mac user just like you, if you are annoyed or discontented please contact Apple > http://www.apple.com/contact/
There is a third party Utility called Shades that will independently dim either Display to black in Extended Desktop Mode. > http://www.versiontracker.com/dyn/moreinfo/macosx/31515 -
How to display Internal Dairy Notes and External Dairy Notes on output
hi Friends,
any one knows how to fetch External dairynotes as well as internal dairy notes thru FB03 T code
regards,
Anil kumar phi Rob,
we need to retrieve internal n external dairy notes thru Read_Text FM.
we need to pass following param.
client -> sy-mandt...
id ->d000(for external dairy notes) and d001 to d015 (internal dairy notes)
lang -> sy-langu
name -> note1 (Is comb. of bsid-bukrsbsid-belnrbsid-gjahr+bsid-buzei)
object->doc_item
tables
lines -> tbline.
and tbline is the return values for dairy notes. -
Mac not displaying External screen as HD
MacBook Pro not properly displaying HD resolution of 1440x900 on External monitor.
MacBookPro2,2:
Intel Core 2 Duo
2.16 GHz
OS X 10.6.8
PC External Monitor:
19" widescreen
1440x900
DVi and VGA inputs
Mac connected by VGA cable and Mac adapter. Have been using this system set-up for 2+ years without an issue.
Downloaded RED Camera software (R3D) to view the camera's raw files (https://www.red.com/downloads/), after install, Mac suddenly not displaying proper high resolution on External monitor. After some searching it appeared to be an issue for others, as suggested, I deleted all traces of the software, but after hard shut down and restart(s), Mac still doesn't output the correct resolution. I know it's the Mac's issue because the External display keeps displaying a message that the computer isn't sending the right resolution out.
In System Preferences > Display Preferences, the VGA Display (the External monitor) lists a slew of resolution options, and the closest resolution to 1440x900 it lists is 1400x1050, 60 Hz, unfortunately this is a stretched aspect ratio on the External monitor, all the other resolutions are too low, are stretched or the frequency cannot be displayed.
Called Apple helpline, and the technician couldn't solve the problem.
Not comfortable with using Terminal commands.
Some have suggested using SwitchResX to create a custom resolution and force the Mac to take it, unfortunately I cannot figure out what technical specifications to enter in the custom resolution cells.
Please help! Thanks!Been doing some research on this TV. In HDMI, according to the manual on p18, it will only do normal or widescreen settings. Widescreen attempts to simulate 16:9. This introduces overscan with image clipping and artifacts on this TV model. A PITA that many are reporting. I believe, that if any HDMI testing is done, it is with Windows 7 PCs, and the internal firmware on the TV is calibrated to that. The other possibility is that the EDID signal sent upstream from the HDMI port isn't being interpreted correctly by the HD4000 or OS X.
If you venture into your Advanced Video Settings from your Picture menu, do you have an underscan setting there, or is overscan/underscan tuning available from the OS X display preferences for this HDMI connection? I saw an insignia post from 2010 where the HDMI video issues were resolved by setting underscan, but it doesn't describe any more detail. This was on a 2010 Mac mini with OS X 10.6.4. No mention what graphics adapter was used. The same post indicated that the same HDMI video feed was ok, when that mini was booted into Windows 7. A far cry from your new mini with the HD4000, but just maybe about that underscan...
If you purchased this TV less than two years ago, you are still under factory warranty, unless acquired under special sales terms, that modified that warranty.
There are four HDMI ports. Same results on all of them?
Don't have this TV here, so can't offer any hands on solution knowledge, if any exists.
Good luck. -
Htmldb 2.0 login screen not showing proper screen and login does not happen
I installed htmldb 1.6 from the comapnion disk (10.2) and everything
worked fine. I could log into htmldb.
I then upgraded to htmldb 2.0 with no problems on the DB side.
I copied the images dierctory from the compaion disk to the right location
but when I try to log in I get a login screen that does not have the 2.0
splash screen and then when I type in my credentials nothing happens.
I am running:
[oracle10@testdb1 htmldb_2.0]$
/u01/oracle10/OraHome2/Apache/Apache/bin/httpd -version
Server version: Oracle-Application-Server-10g/10.1.2.0.0
Oracle-HTTP-Server
Server built: Dec 2 2004 19:23:24
you can see in the marvel.conf that the image directory is /u01/oracle10/OraHome2/htmldb/images/
Alias /i/ /u01/oracle10/OraHome2/htmldb/images/
<Location /pls/htmldb>
Order deny,allow
PlsqlDocumentPath docs
AllowOverride None
PlsqlDocumentProcedure wwv_flow_file_manager.process_download
PlsqlDatabaseConnectString
testdb1.atcscc.tfmi.nas.faa.gov:1521:d2tfmdb ServiceNameFormat
PlsqlNLSLanguage AMERICAN_AMERICA.WE8ISO8859P1
PlsqlAuthenticationMode Basic
SetHandler pls_handler PlsqlDocumentTablename wwv_flow_file_objects$
PlsqlDatabaseUsername HTMLDB_PUBLIC_USER
PlsqlDefaultPage htmldb
PlsqlDatabasePassword @BX5miUCgp+G3mLhUsFTZ3pNweNo7ykAArA==
AddType text/xml xb1
AddType text/x-component htc
Allow from all
</Location>
I copied the install image directory to this (as you can see)
I.e cp -rf htmldb/images /u01/oracle10/OraHome2
but when I log on to htmldb
(http://xxxx.domain:7777/pls/htmldb)
I get the htmldb logon screen but not the 2.0 splash screen. It's like
its not seeing the gif files.
I enter the workspace /username/password but nothing happens, no
errors, no web page cycle, nothing.......
[oracle10@testdb1 home]$ ls /u01/oracle10/OraHome2/htmldb/images/
16admin.gif Fndtre01.gif
portal_right_menu_bott.gif
1pixelbeige.gif Fndtre02.gifIt looks like your copy command was wrong.
cp -rf htmldb/images /u01/oracle10/OraHome2
will copy the images directory to /u01/oracle10/OraHome2, it won't copy htmldb/images.
You want to:
1) cp -rf htmldb/images /u01/oracle10/OraHome2/htmldb
2) Remove the directory /u01/oracle10/OraHome2/images that you created
Joel -
Sharepoint Foundation Can not update External List by Work Flow
Hi
I try to update External List by other list Work Flow, in Sharepoint 2010 Foundation.
Here is the manual:
http://msdn.microsoft.com/en-us/library/office/ff394479(v=office.14).aspx
But it fails , and the error message is “The
workflow could not update the item in the external data source. Make sure the user has permissions to access the external data source and update items.”
Is there some limited in Foundation?http://social.technet.microsoft.com/Forums/en-US/0bb9ef28-3614-4db2-b19f-dd81e8cc2d42/the-workflow-could-not-update-the-item-in-the-external-data-source?forum=sharepointgeneralprevious
With no Secure Store in Sharepoint what we ended up doing was creating a new external content type, adding a new connection and picking a connection type of .net type instead of sql. This means we needed to create a .net app as the go between but within
.net we had all the usual tools for connecting to sql without permission issues.
Also check
http://wyldesharepoint.blogspot.in/2010/06/setting-up-external-content-type-for.html
If this helped you resolve your issue, please mark it Answered -
How to create a variant for a screen (not a selection screen)
Hi
I foud a function module RS_CREATE_VARIANT.
Is this the correct fm for creating screen variant, if yes then pls provide me some help about how to pass values to this fm.
if not then pls help me to find out new one.
thnks
satisfactory answer will be definitely rewarded.
S@meerpassing values to RS_CREATE_VARIANT.
data : LS_VARIANTDESC TYPE VARID.
DATA : LT_VARIANTTEXT TYPE TABLE OF VARIT ,
WA_VARIANTTEXT TYPE VARIT.
DATA : TT_REPORTPARAM TYPE TABLE OF RSPARAMS,
WA_REPORTPARAM TYPE RSPARAMS.
CLEAR LS_VARIANTDESC.
LS_VARIANTDESC-MANDT = SY-MANDT. " gr 46A
LS_VARIANTDESC-REPORT = 'ZXXXXX'.
LS_VARIANTDESC-VARIANT = 'VARIANT'.
LS_VARIANTDESC-EDAT = SY-DATUM.
LS_VARIANTDESC-ETIME = SY-UZEIT.
REFRESH LT_VARIANTTEXT.
CLEAR WA_VARIANTTEXT.
WA_VARIANTTEXT-MANDT = SY-MANDT. " gr 46A
WA_VARIANTTEXT-LANGU = SY-LANGU.
WA_VARIANTTEXT-REPORT = 'ZXXXXXX'.
WA_VARIANTTEXT-VARIANT = 'VARIANT'.
APPEND WA_VARIANTTEXT TO LT_VARIANTTEXT.
CALL FUNCTION 'RS_CREATE_VARIANT'
EXPORTING
CURR_REPORT = 'ZXXXXX'
CURR_VARIANT = 'VARIANT'
VARI_DESC = LS_VARIANTDESC
TABLES
VARI_CONTENTS = TT_REPORTPARAM
VARI_TEXT = LT_VARIANTTEXT
EXCEPTIONS
ILLEGAL_REPORT_OR_VARIANT = 1
ILLEGAL_VARIANTNAME = 2
NOT_AUTHORIZED = 3
NOT_EXECUTED = 4
REPORT_NOT_EXISTENT = 5
REPORT_NOT_SUPPLIED = 6
VARIANT_EXISTS = 7
VARIANT_LOCKED = 8
OTHERS = 9.
IF SY-SUBRC EQ 7.
If variant with same name already exists, change variant
CALL FUNCTION 'RS_CHANGE_CREATED_VARIANT'
EXPORTING
CURR_REPORT = 'ZXXXXX'
CURR_VARIANT = 'VARIANT'
VARI_DESC = LS_VARIANTDESC
TABLES
VARI_CONTENTS = TT_REPORTPARAM
EXCEPTIONS
ILLEGAL_REPORT_OR_VARIANT = 1
ILLEGAL_VARIANTNAME = 2
NOT_AUTHORIZED = 3
NOT_EXECUTED = 4
REPORT_NOT_EXISTENT = 5
REPORT_NOT_SUPPLIED = 6
VARIANT_DOESNT_EXIST = 7
VARIANT_LOCKED = 8
SELECTIONS_NO_MATCH = 9
OTHERS = 10.
ELSEIF SY-SUBRC NE 0.
MESSAGE WITH 'Cannot create/change variant for'
SY-UNAME.
ENDIF. -
Blu Ray video disk will only display on W500 screen, not on attached screens
My W500 (Win7-64bit) plays blu-ray disks perfectly on the W500's screen. But it will not play on an attached 1600 x 1200 DVI monitor, either attached through a mini-dock, or via the DisplayPort and a DVI convertor adapter. In both those cases, WinDVD 2010 (which I purchased to replace WinDVD 8 provided) says "Your display environment does not support protected content playback" WinDVD 8 gives exactly the same message. The same Blu Ray drive plays DVD's perfectly to the 1600x1200 DVI screen. Anyone understand what the problem might be ?
Hello,
I saw your reply in this five year old thread asking about HDCP.
HDCP is short for High Definition Copy Protection. It means the devices at both ends (video card, monitor) must support encrypting the signal between them in order to prevent digital copying/piracy.
Regards,
Aryeh Goretsky
-
My retina Display stop working external hdmi connection works
While watching today apple keynote. At the and i realized that my retina display is totally black. Mirror display through hdmi is ok, apple logo on back side of disply is not lighting. Any help?
Hello Svoskar
Check out the article below to troubleshoot issues with no video when extending the desktop. Try resetting the NVRAM to change the resolution of the display back to its defaults and may show up again.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
Regards,
-Norm G.
Maybe you are looking for
-
Podcasts no longer show in iPod player
I have been downloading both audio and video podcasts directly to my 1st gen. iPad via iTunes Store app for some time. Since the recent update, the podcast episodes appear to download, but do not show in the iPod player. I am getting apps to downlo
-
Photo quality problem in iWeb 08?
I'm still using iWeb '06 but thinking of upgrading. When the '08 version was new I saw some reports that photos handled by '08 were of lesser quality than that provided by iWeb '06. Is there any truth to this? If so, was it fixed? My main use of iWeb
-
Recover Database vrs Recover Tablespace & Datafile
Traditionally when I have been recovering a database either to point of failure or point in time I have issued RECOVER DATABASE AUTO; (or I have specified the point in time I wish to recover to ). I see now in 11gR2 there is also a RECOVER TABLESPACE
-
With all these resources why is Aperture so slow?
Since the last update Aperture 3.0.2 is running slower that before. When I check Activity monitor at times it will have 145% of the CPU over 36 threads using a gig and a half of ram and just sit there being in an almost hung state. I say almost hung
-
Quality Manager Deskop application recording tab
Dears, I have installed a Quality Manager, a contact centre, and a CUCM, and i have the following problem: While running the quality manager Desktop application, I can see recordings in the archive tab for all agents, but on the recording tab i can o