IMAC 24" screen went dead. Can I buy a mac compatible monitor and still use the IMAC hard drive?

IMAC 24" screen went dead. Can I buy a mac compatible monitor and still use the IMAC hard drive - which is still working? I took it to the Apple store and they quoted $500+to replace the monitor. No help as usual. Can I buy a MAC compatible monitor ($189) and use it as a primary monitor? Can I set it up if the screen on the IMAC is dead? Any other solutions?

The only negative to not having the original drive will be the work needed to reinstall all the apps and reconfigure to your liking. You will also have to decide whether to stay on Lion (which you should update to 10.7.4, BTW) or bite the bullet and take a leap of faith on Mountain Lion.
In either case, to simplify matters you would do well to concoct a Lion or ML bootable installer on a USB stick. In either case, you need to get the corresponding installer downloaded onto the hard drive and, instead of running it to execute the install, extract the coveted InstallESD.dmg image from which you construct the bootable installer. See here for details: https://discussions.apple.com/message/17782820#17782820 The procedure applies the same to both of the latest cat flavors.

Similar Messages

TS1741 I have lost the original remote for my Apple TV. I went to install it at my fiancés house, and cannot use the remote app on my ipad or iPhone. Can I still control the Apple TV with the apps?

I have lost the original remote for my Apple TV. I went to install it at my fiancés house, and cannot use the remote app on my ipad or iPhone. Can I still control the Apple TV with the apps?

Welcome to the Apple Community.
Your Apple TV may have become paired with another remote. Hold the remote close to and pointed at the Apple TV, hold down the menu and Rewind buttons together for 6 seconds or until you see a broken chain icon on screen.

Can i buy a smaller macbook air (64gb) but use the time capsule for additional data ?

can i buy a smaller macbook air (64gb) but use the time capsule for additional data ?

If you plan to store important "original" or "master" files and documents on the Time Capsule, then you might want to think about a way to back up those files to another hard drive.
Why? If the Time Capsule has a problem...and you have no backups....you lose everything.

Can i buy an iphone in US and then use it in India with Indian Networks

can i buy an iphone in US and then use it in India with Indian Networks

Asked all the time here. If officially unlocked, yes, the phone will work in India. Officially unlocked iPhones are only sold by Apple in the US...no where else. Currently, the only unlocked model available is the T-Mobile labeled iPhone.
Your warranty/support will only be valid in the US...they won't touch the phone in India if you have any problems or issues. And, the phone will most likely not support LTE in India.

I'm about to transfer the contents of my existing HDD in my (dead PSU) iMac to another computer. I'm just wanting to know if and how I will be able to access my files and documents from the old hard drive once I've made the backup?

I'm about to transfer the contents of my existing HDD in my (dead PSU) iMac to another computer. I'm just wanting to know if and how I will be able to access my files and documents from the old hard drive once I've made the backup?

You are not going to be able to run your old system from the backup on this old computer as the hardware is incompatible.
You need to get a new computer or a refurbished one.

New iMac. Flash drive is primary for OS and apps. I want to use my HD 2 (1 TB hard drive) for my bulky photo and music files. Can I direct iPhoto and iTunes to use the larger hard drive as the primary target when importing?

New iMac. Flash drive is primary for OS and apps. I want to use my HD 2 (1 TB hard drive) for my bulky photo and music files. Can I direct iPhoto and iTunes to use the larger hard drive as the primary target when importing?

Yes. Unfortunately, I don't know the specifics because I don't use iPhoto anymore and I completely copied over 15 years of MP3 files recently when I installed 10.7. Needless to say, I have not opened iTunes since and probably never will again - not because of iTunes but because of my stupidity. I did have some of the files backed up but I hadn't backed up in a while.......anyway....
When I imported my CD's, I had them go directly to my external firewire. I can't remember exactly how to set it, but in the preference section of iTunes you can specify an import destination to any drive that's available to your machine. I did this with iPhoto as well way back at one point when I was using Tiger, but I don't remember the specifics on that either. I can't imagine they would have discontinued support for that feature since then.
Sorry I couldn't help more.

Can I have two apple id's but still use the same itunes

My mom just got an iPhone. We use the same iTunes but can we both have different Apple ID's and still use the same iTunes??

Log in and out of the iTunes Store as needed; content purchased from both can exist in the same library and on the same device.
If you've purchased an application under one ID, you may need to be logged into it to make in-app purchases. If the iTunes library contains protected content from more than five Apple IDs, iTunes may not allow devices to be fully synced.
(91939)

My ipad imessages are coming up on my husband's iphone. Is that because we share an apple id account. How can we have separate apple id's and still share the same music library.

my ipad imessages are coming up on my husband's iphone. Is that because we share an apple id account. How can we have separate apple id's and still share the same music library.

The biggest problem I have is with cross texting. My friends send my a imessage on ipad to ipad and it comes up as message on my husband's phone as well as my ipad?
My friends definitely do not want my husband seeing their texts. (and I dont really need him to see my responses either)
Also, apple id is based on my email account, how do I create a new apple id without setting up a new email account?

HT5922 Can I airplay a movie from safari on my MacBook to Apple TV and still use the computer for something else at the same time?

Can I airplay a movie from safari on my MacBook to Apple TV and still use the computer for something else at the same time?

Hi frogjt,
Welcome to the Apple Support Communities!
Great question! You can absolutely do this in OS X 10.9. The attached article explains how the process of using AirPlay with Apple TV to create a second display. Also, towards the bottom of the article there are instructions on how to set your Displays preferences on the computer to make sure the TV and MacBook Pro displays are set up the way you want them to be.
OS X: Using multiple displays in Mavericks
http://support.apple.com/kb/HT5891
Have a great day,
Joe

Received adobe photoshop elements 12/adobe premiere elements 12 when I purchased a MacBook Pro. The macBook Pro does not have a DVD player it is sold separately. To install the program can I download a free trial version and then use the serial numb

Received adobe photoshop elements 12/adobe premiere elements 12 when I purchased a MacBook Pro. The macBook Pro does not have a DVD player it is sold separately. To install the program can I download a free trial version and then use the serial numbers from the set I received?

yes, that's exactly what you should do,
Downloads available:
Suites and Programs: CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5 | 4 | 3
Captivate: 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Can I stop the iPhone from surfing the internet and still use the "find my iPhone" option?

Hi. Can I use my iPhone without causing internet-costs? I have got a prepaid-card and my iPhone uses the internet all the time - that costs a lot of money. So can I stop the iPhone from surfing the internet and still use the "find my iPhone" option?

Find My Phone REQUIRES an internet connection in order to work. Either WiFi or Cellular Data. So, if you turn off Cellular data, you're defeating Find My Phone.

Can I have a custom RTP payload, and still use a MediaLocator?

Hi,
I think I am a little confused. Can I have a custom RTP payload, and still use Manager.createPlayer(MediaLocator locator) to create my player?
This doesn't seem possible because the RTPManger's addPayload(Format format, int payloadType) method isn't static, forcing me to always create my RTPManager first.
Is this a valid observation, or am I missing something?
Your comments are highly appreciated.
Kind regards,
Erwin

Thanks for your prompt reply.
The short answer is yes.
The MediaLocator is used to identify the source, or destination for a media stream. For example this could be a file (file://c:\mydisk\audio.wav) or a URL (http://mydomain/music/audio.wav)
Ok, I get that, but the MediaLocator is also used to identify the protocol, rtp in this case, and the protocol in its turn is used by the framework to locate the DataSource. I am not suggesting what you write is incorrect, I am only trying to understand how this works the way it does.
RTP is used to transport streaming media in real time over a network (usually UDP).And that is exactly what I need it for.
The receiver of an RTP stream is an RTP receiver. Players take the datasource(created from the MediaLocator) and feed the data to the RTP manager so it can be streamed across the network or vice versa.
The vice versa part is what I am interested in. I need to handle a proprietary video format, packed as RTP, and shipped over UDP. My initial approach was to simply register my DePacketizer with the PlugInManager, and add my custom payload type to the RTPHandler (addFormat(Format fmt, int type)). That obviously doesn't work.
So what I'm trying to convey is that the MediaLocator used in creating a Player will be different, and is used for a different purpose, than the Internet address, and Port used to create an RTPManager.I need a good night of sleep to think that over. I.m.h.o. there is no reason to handle "http://host:port/video/whatever.ext" different from "rtp://host:port/video/whatever.ext". The only difference is that in the first case I can build my graph based on the extension of whatever, and in the second case I have to wait for my first packet in order to determine the payload type. In both cases I expect "DataSource ds = Manager.createDataSource(ml) to work (and it probably does for the standard payload types).
The JMF framework has a .../media/protocol/rtp/DataSource class as well as a .../media/protocol/http/DataSource class.
Is this making any sense?Not sure yet, but I certainly appreciate your help.
Note: In general you don't need to create a custom Payload for RTP.
What if I want to ship a proprietary video format?
Thanks a lot,
Erwin

Can I change my family plan to the month to month plan prior to my contract end date and still use the same phone without an etf

can I change my family plan to the month to month plan prior to my contract end date and still use the same phone without an etf

Great question dreyfusdad !
I understand it’s always good to be aware of the changes once your contract is completed and I’m happy to help you. You can log into My Verizon to view the contract end date. Tikibar1, thank you for pointing in the right direction; it will automatically continue to bill you as usual, but it will be on a month to month basis. It will keep you on a post paid account; however, if you wanted to transfer to a Prepaid account the process may be different. We’d love the opportunity to review your account for the best plan for you. Please let us know if we can help you with that.
AdaS_VZW
Follow us on Twitter at @VZWSupport

Can I configure my HP dv7-4165dx to boot from the second hard drive?

I have had an HP dv7-4165dx for about 20 months now. About 10 months in, the original hard drive burned up because of the placement directly under the GPU (bottom left corner, left of the touchpad and below the keys), which gets hot enough on the top side to make your hand uncomfortable. The symptoms included blue screens, troubles on startups, and finally a system message on boot that said the drive was damaged. Since it was under warrantee, I carried it to Best Buy to have the drive replaced, which took nearly 2.5 months.
Now, at about 20 months, I am facing the beginning of the exact same symptoms. I noticed that there was a second hard drive bay, away from the GPU, so I purchased the wire needed to use that bay. Now it tells me that there is no bootable disc installed (the hard disk test, in system diagnostics, knows it is there) . I am sure I can swap the drive back to the original bay and be fine but that puts me out $75 for the kit from HP (yeah, I know I may have to eat that if there is no way), but far more importantly it means that I will have another burned out drive (losing everything, again) within a month or two.
I have looked but I can't seem to find any way to tell it boot from that drive. Is there a way, or am I just out of look due to a poor design? It's been a great machine, except for this issue.
This question was solved.
View Solution.

Hi,
Unfortunately there is no option to be able to boot from the HDD in the 2nd bay in any of the dv7 series - sorry for the bad news.
Best regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Can I clone and transfer from the internal hard drive to an external hard drive ?

I got an intel duo iMac, the machine is very good even if it is almost 3 years old. But with the internal hard drive having 320 Gb I am running out of hard drive space. I have looked into changing the internal hard drive but that involves having to send the machine away to have that done. So I was wondering if I could just transfer all the Mac OS X and all the applications and settings within three user accounts to say a 2 TB external hard drive, and boot from that, using cloning software.
Alternatively, is there a way to transfer the iPhoto and iMovie libraries to an external hard drive. That would free up space. I do not know how, if that is possible, although I have managed that with iTunes. My iMac is running Snow Leopard.
Regards from John5801

John,
USB should be fine for general computer use, but media may add a little too much for the sustained rate that USB2 provides. In a previous career I did a lot of video editing. Firewire was much preferred in that task because of its stability at higher rates. I can see why the SuperDuper! people might suggest it.
When I cloned the wife's iMac, I had replaced the HDD on the MacBook Pro with a USB pocket drive that I've kept the original MacBook's installation mounted on. I've booted directly to that external drive, so you should be okay if you can make the clone across the USB. When I cloned the wife's machine I booted the MacBook Pro with a fresh HDD in Firewire target mode and connected it as an external Firewire 800 drive. Firewire 800 is much faster, but you'll need the cable and everything to be right.
Firewire has a better reputation among people running a lot of media from their drive. I would suggest that you try and get an external drive kit that can support both. I think your iMac supports both firewire 400 AND firewire 800 along with the 3 USB2 ports. I'm guessing based on my wife's 24" imac. The fastest would be the Firewire 800, but that standard is about to be pushed aside in both cases.
Hope that helped.

IMAC 24" screen went dead. Can I buy a mac compatible monitor and still use the IMAC hard drive?

Similar Messages

Maybe you are looking for