IMAC can not identify canon mx712 as a scaner

We have an iMAC and a mac book pro.  Both running os x mountain lion with the latest updates.
We have been using a cannon MG8120 printer+scanner and both computers can use its printing and scanning functions.
All computers and printers are connected through wifi with WAP.
Recently we added a canon MX712 multifunction printer/scanner/fax.
We did the set up for MX712 on the mac book and it can use both MG8120 and MX712 as printer and scanner.
The iMAC can detect the MX712 as a printer and use it for prinitng. But it can not detect the MX712 as a scanner
when I tried to add it as a scanner.
I belive I did install the MX712 driver for scanner on the iMAC. Actually I did it several times.
Any suggection ?  Thanks in advance.
Regards, 

zpauc wrote:
   When I tried to add a printer through Sytem Preference --> print and scan,
     The MX showed up as Canon Network IJ and Bonjour Multifunction.
     I tried to add each of them. Each became another printer.
The Bonjour Multifunction entry should have created a Print and a Scan button, as shown below for an MX895, providing the ICA driver for the MX712 is installed. This ICA driver is available from Apple Software Update and should be downloaded and installed when the MX is added to the Mac - the same way the printer driver would have been obtained.
Note that the above is only required if you want to scan using Image Capture or Preview. If you want to use Canon's MP Navigator application, then your Mac has the full scanner driver installed and ready based on your results (the scanner is seen with the Scanner Selector app). To use the network scanner with MP Navigator, you need to open the Preferences for the application and then under the General tab, select the networked MX as your preferred scanning device.

Similar Messages

  • Master Data Services - Can not add new User and MDS can not Identify LOCAL Users

    Team,
    We are using  SQL Server 2008 R2 and system working since long and suddenly we observed mentioned two issues. The server MyServer is already restarted but did not help.  The MDS installed and configured on SAME Machine (MyServer).
      I  have two issues here.
    1. MDM website can not Identify the local Users (MyServer\MyUser).
    The User created on local Machine (MyServer\MyUser). I logged into MDM website using Admin login and click on User and Permission. Then I click on add and Text box appears to type UserName. Here I type "MyServer\MyUser" (MyServer\MyUser is already
    exists and working since long). Then click checkName; I received a message "No exact Match was found for MyServer\MyUser". Where as User from OTHER domain identified in MDM but could not identify ONLY the local users like "MyServer\MyUser".
    2. Can not add new user in Existing working MDM.
    I created windows user on machine (MyServer\MyUser1) and add it in UserGroup having an access to MDM. and then I tried to login to MDM using newly created user (MyServer\MyUser1) ; I see error Access Is Denied. The Permission assigned to UserGroup (not
    to individual user). The new User (MyUser1) should automatically get added in MDM once logged in. This is working for existing users in UserGroup; BUT NOT ONLY for new user (MyUser1).

    Now I Solved this problem in my case.
    I just grant again all permissions according http://msdn.microsoft.com/en-us/library/ff486994.aspx. Now all work fine.
    Hope, it will help 

  • I can not open canon 60d raw images on photoshop CS5.1? can not go to updates either- error?

    I can not open canon 60d raw images on photoshop CS5.1? the same program on stationary mac can open the same raw files, whereas new lap top can not? Why?  can not go to updates either- error, why?

    Which version of mac os x does your new mac have?
    What error do you get when going to Help>Updates in photoshop cs5.1?
    You might try downloading and installing the 6.7 camera raw update from here:
    Adobe - Photoshop : For Macintosh : Camera Raw 6.7 Update
    If you need any other updates, you can find most of them here:
    http://www.adobe.com/downloads/updates.html

  • How do I easily find a photo in events? I found it in the photo view but can not identify the event it is in.

    How do I easily find a photo in events? I found it in the photo view but can not identify the event it is in.

    Right click on the Photo and choose 'Show Event'

  • My up to date iMac can not read the lightroom 5 installation dvd I received for christmas, the dvd player works fine with other dvd's, is there a way to download the program with the dvd's serial number?

    my up to date iMac can not read the lightroom 5 installation dvd I received for christmas, the dvd player works fine with other dvd's, is there a way to download the program with the dvd's serial number?

    No need to worry about the disk version. You would just have to install an update anyway as soon as it was installed. Download from the link provided below and use the serial number you have to activate.
    Product updates

  • IMAC can not see any wifi networks at all?

    IMAC can not find any wifi network at all. A few days ago the Imac suddenly had no wifi and on turning the WIFI on and off it became apparent that when it scans for wifi it can see no wifi networks at all. I have several other computers and they all see the wifi networks fine. I assume it is a hardware issue but the hardware test I preformed comes up with no errors. Anyone got any ideas?

    Hello Sage10,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    Wi-Fi: How to troubleshoot Wi-Fi connectivity
    http://support.apple.com/kb/HT4628?viewlocale=en_US
    Best of luck,
    Mario

  • IMac can not see Windows machine on network

    Hi guys,
    Before the AirPort Extreme Update 2007-02, my iMac can connect and share with my Windows machine. However, after installing the AirPort Extreme Update 2007-02, my iMac can not see my Windows machine work-group anymore. How to fix this problem ?
    Im using 20' iMac running on Mac OS X 10.4.8
    Please help.
    DeathNote
    iMac 20' inch   Mac OS X (10.4.8)  

    If reinstalling the current update doesn't work, perhaps that is because the update was completed properly, but in the process has messed up configuration settings files and preferences. If you can't find any problems in your settings through System Preferences, then there are probably hidden errors in the .plist files and the way to correct that is by manually wiping out all your network settings files and redoing everything in Network preferences may be a quicker fix than brain surgery. Try deleting these files, then reboot and redo your network settings appropriately..
    These are all in the folder /Library/Preferences/SystemConfiguration:
    com.apple.airport.preferences.plist
    com.apple.nat.plist
    NetworkInterfaces.plist
    preferences.plist
    Note, this will wipe out all network-related settings, and force the OS to rebuild default preference settings files for the built-in network devices. This is sometimes the only thing that will clear up bizarre networking issues, but generally speaking, it works well.. just don't forget to thoroughly note all your proper network settings including wireless network passwords and all that before you perform this house cleaning for reference as a precaution.

  • MacBook Air can not find canon f8500 series printer on network.

    MacBook Air running OS X Yosemite can not find Canon MF8500 series printer on wireless network. AirPrint is turned on at printer. iPhone iOS 8.2 can not AirPrint to printer as well. Recently switched from Verizon to Comcast for internet service, no issues before switch. Tried to add printer via IP address, it was located but could not print to printer.

    If you haven't done so already, try resetting the printing system.
    OS X Mavericks: Reset the printing system  also Yosemite
    Try setting it up as something other than AirPrint. I have seen several posts where that was the problem.

  • CAN NOT OPEN  CANON EOS20D  RAW FILE IN PHOTOSHOP CS2

    I had Photoshop CS2 installed on my PC some years ago and could open my raw files from my canon eos 20d. I changed the hard drives in my pc to solid state drives and had to reinstall photoshop cs2. I could not activate photoshop as it was too old a version so I had to download from adobe website with their activation code. Now, I can not open any of my canon eos 20d files. I have taken some now photos just a few days ago and the problem still arises. I get the message that it does not recognise this type of file. Any ideas?

    You downloaded, extracted (unzipped) the Camera_Raw_3_7.zip and copied/moved the Camera Raw.8bi to
    C:\Program Files (x86)\Common Files\Adobe\Plug-Ins\CS2 (windows 64 bit system)
    or
    C:\Program Files\Common Files\Adobe\Plug-Ins\CS2 (windows 32 bit system)
    Camera Raw 3.7 update for photoshop cs2 Windows
    Adobe - Photoshop : For Windows : Camera Raw 3.7 update
    other cs2 updates
    Adobe - Photoshop : For Windows
    Adobe - Bridge : For Windows
    Adobe - Creative Suite : For Windows

  • PC to iMac, can not open the files

    I transfered adresses and agenda with WindowsMigration assistant.  Without asking me for a password there is now a new account with this information on my iMac.  But I can not open it because I don't know the password.
    I have tryed to change the password but no reaction.
    If I can open this account how do I move the adres and agenda content to the Adressbook and iCal of my main account?
    I also tried to download O2M but this 'Little machine website is under construction and it is not possible to download this software
    Raymond

    raymondfromhasselt wrote:
    No the system did not ask for a password.  On my PC (the one from witch I want to get the addres book) has no password at all.
    You should be asked to create a password for the new account created on your Mac. 
    As I read Apple's OS X Lion: About Windows Migration Assistant document, that should happen after the migration is complete, when you next log on.  So you may need to run the assistant, log off, then log back on to see the prompt.
    I am struggling several days and tried several times. 
    I suspect that each time you run Migration for Windows, it will create a new account, so you may have several.
    They should all be listed on System Preferences > Users & Groups.

  • Download of photo soft ware to iMac can not be found.

    I downloaded Topaz Fusion Express and went throught the install process but the application is nowhere to be found.  I tried it twice and both time got the "install complete" statement.  Topaz Labs help indicates it should be located in Mac HD>Library>Applications>Support.  I don't see this file chain on my iMac.  I have Applications and under that is all my other installed and downloaded software.  I am new to the Mac world and maybe can not find where my Topaz application is hiding but I feel like I have looked everywhere.
    Thanks for your help.

    Mac HD>Library>Applications>Support.
    There is no such path (exactly) - but, there is:
    Mac HD > Library > Application Support.
    Then there is another Application Support folder in the (now hidden) User Library folder.
    Having said that, if what you downloaded is an Application, it should be in the Applications folder. Usually, support files are parked the Application Support folder, so this would be somewhat odd. But, if that is what that company says, check those two folders.
    Edit: I just googled that software and yes, the support folder would be correct since it is a support app/plugin/helper for Aperture, etc.

  • My iMac can not see my mini Mac via Airport extreme using host name, only via IP address. What am I doing wrong ?

    I have an iMac and a mini Mac attached to the same Airport extreme. It would appear that Bonjour works because I can see the hostname of the mini Mac server in Finder on the iMac.
    But if I type in the host name (myminimac.private) in the Safari browser at the iMac it can not find the mini mac. However if I type in the IP address of the mini mac server it can see the see it.
    It used to work but I must have done something to mess it up.
    Anybody any suggestions ?

    You have the wrong card. You need the original AirPort card for your G4.
    ...how the **** do i get the Superdrive to open up so i can put in a CD/DVD?
    If the keyboard has a media eject key, press that. If not, hold down F12.

  • Lost all sounds on Imac can not deselect mute all computer sounds

    I can not deselect mute all computer sounds on my Imac with Lion I went into preference and for output the only thing I can select is headphones is there away to get the built in speakers back on this drop down list?

    Hello, long shot, but...
    Open Audio Midi Setup in Applications>Utilities, see the input & output options & KHz setting there, some things will change it for their own use, then not set it back

  • Lost email folder from iMac - can not locate

    Hi
    I recently reinstalled mountina lion on my mac. some of my emails are stored in iCLoud where as older ones were in folders on my mail app and not in iCLoud. I can not see them now and I cannot locate them on my mac. I have regular backups - can anyone tell me where I might find my old email fodler on my time machine backup drive.
    THanks

    I think it is an old mailbox I have deleted. I did have an @me.com and an @icloud.com. Now I only have @icloud.com. Anyone know how to find old mailboxes on a time machine backup drive?
    Thanks
    Andrew

  • Adobe Reader XI can not identify letters in Myriad style

    Adobe Reader XI can not show any word (blank nothing) if the letters edited in Myriad style then you convert it into PDF file.

    I tried downloading WPS but its all in Chinese. Let me try with the English installer for WPS.
    As this is working with with MS word, it means that this is something to do with conversion engine of WPS.
    With MS word, when you try to convert the .doc file to PDF, using File - Save as  - PDF, it uses Microsoft's conversion engine, which is converting the doc file to PDF with the fonts.
    I will recommend you to download Adobe Acrobat XI as a trial and then use Adobe Acrobat to convert the .doc file in PDF.
    You can download the Acrobat trial from http://www.adobe.com/cfusion/tdrc/index.cfm?product=acrobat_pro&loc=en
    ~ Aditya

Maybe you are looking for