IMac connected to Airport Extreme stopped detecting printer

Can't connect any more printer (Epson Stylus SX125) to iMac through Airport Extreme. Any solution?

GoldHill wrote:
USB Backup drive connected to USB port on Airport Extreme. Running system 10.5.5
On my Macbook Pro, which I connect wirelessly, I was able to start Time Machine... Time Machine saw the backup drive and did a backup.. Yes it took a long time!! Anyway all is cool with that.
My iMac is connected to the Airport Extreme by Ethernet. On the iMac when I started Time Machine, it does not see the backup hard drive. I can see and share the hard drive... works fine. But no luck with TM seeing the hard drive on the iMac.
Questions is will Time Machine work with a computer that is connected to airport extreme by ethernet. If yes how o you set it up and what might be wrong??
yes, it should work. hard to say what's wrong. try the following terminal command. it should not be necessary but it should help.
defaults write com.apple.systempreferences TMShowUnsupportedNetworkVolumes 1
One other important thing to mention. At first I plugged my new backup hard drive directly into the iMac with firewire 800. I started time machine and started the backup. I then stopped that backup and plugged the backup hard drive into the Airport extreme (USB port) I then trashed the partial backup folder off the backup hard drive. Is it possible that on the iMac there is still some TM file there pointing to the old original backup file??
have you emptied trash? you should. the files won't really be deleted till you do. there is one other hidden file but it should not be necessary to remove it.
Thanks.... any help is appreciated.

Similar Messages

Printing problems with HP 1012 connected via Airport Extreme - resolved?

I originally posted on this issue in a long-running discussion on HP printer issues.
http://discussions.apple.com/message.jspa?messageID=10109788#10109788
Problem: Upgraded iMac 10.4.11 to 10.6 Following upgrade everything seemed fine except that the HP 1012 connected via Airport Extreme was not responsive. The system knew the printer was there, had installed the proper driver for it.
Intermediate troubleshooting: I tried to use Airport Utility to check the AE. It timed-out when trying to retrieve the AE setup specifications. I tried to update the firmware (7.4.1 to 7.4.2); system timed-out after a very long several minute "search for new version of the firmware."
Apparent solution: (any of the following may have made the difference - sorry not to have been more systematic)
a. I turned off AP on the iMac.
b. I unplugged the AE base station for one minute+, then re-powered it.
c. I opened my MBP with 10.5.7. Started up Airport Utility.
d. I renamed the base station. Left all other settings alone.
e. I installed the 7.4.2 firmware upgrade.
f. I ran Preference Repairs on the iMac (though I had done this right after installation of 10.6)
g. I turned on AP on the iMac.
Result: Almost immediate connection to AP, printer quickly began printing several of the test documents that must have been waiting in queue.
Too early to tell if I will have any further problems if if it permanently fixed.
Thanks to the several messages in both Printer and Network categories that suggested one or more of the above steps.
Stan

I hooked up my wife's Deskjet 5150 to my mac via USB. Since the 5150 does not have a driver from HP to work in SL. I decided to us the generic Gutenprint v5.2.3. For the heck-of-it, I picked, HP Deskjet 5550-Gutenprint v5.2.3. It prints. and the utility works, BTW, I am low on black ink.
I also tried the other printer drivers labeled "any printer name"-Gutenprint v5.2.3. and they all worked with the 5150.
So now that I know that the 5150's will work via USB with SL, I will now upgrade the other two laptops in my house to SL.
How to:
Turn printer on.
open System pref/ printer-fax/ add printer
Select hp desktop 5100
(name: -- Change name if you want - I kept " hp deskjet 5100"
Location: Your computer
Print Using: open dropdown box, select printer software. Type in: " Gutenprint" or "deskjet". I picked the HP Deskjet 5550-gutenprint v5.2.3. but I do not think it matters as long as it is a -gutenprint v5.2.3 driver.
Select OK

How do I connect my Airport Extreme 802.11n to Epson 645 Printer?

I can't figure out how to connect my Airport Extreme 802.11n to my Epson 645 Printer. Can anyone help me? Thanks!

You may want to try reinstalling Mavericks. Airport Utility installed by Mavericks may no longer connect to your older AEBS (though I've not heard that.) Installing the Old AirPort Utility (Version 5.6) on Mountain Lion | frank.is.
Reinstall Lion, Mountain Lion, or Mavericks
     Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
     COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and
     after the chime press and hold down the OPTION key until the boot manager screen appears.
     Select the Recovery HD and click on the downward pointing arrow button.
     Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu.
     Repair the Hard Drive and Permissions as follows.
After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
     Reinstall Lion/Mountain Lion, Mavericks: Select ReinstallLion/Mountain Lion, Mavericks from
     the Utilities menu, and click on the Continue button.
     Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is
                three times faster than wireless.

HP Laserjet P1102 print multiple pages - USB connected to Airport Extreme -

Hello,
My configuration is Windows Vista/7 - Bonjour Print - HP LaserJet P1102 USB connected to Airport Extreme.
Everytime I sent a print job - it get printed endless times until I hit "Cancel" on the print queue.
Help anyone..
Thank you very much,
- eagleputt

Hi gingerjedi,
It's normal with your actual Airport and confirm by Apple, but ...
Only If you see your printer in Airport Admin Utility under Printer :
1) Download and install : http://www.openprinting.org/download/printdriver/macosx/foomatic-rip-2008-01-30. dmg
2) Download and install : http://www.openprinting.org/download/printdriver/macosx/gplgs-8.61-ub.dmg
3) Download and install : http://www.openprinting.org/download/printdriver/macosx/hpijs-2.7.10-UB.dmg
4) Repair permissions with Onyx or with your Install Disk
5) Restart your computer
6) Restart your connection with your Printer (Cable-Power-Connection with your Airport)
7) In Prefs Panes, select Printer ( + ) and install a new Printer
8) Select your indicated Printer in the menu choice. If you have a Name for your Airport, give this Name under Place or Emplacement (excuse, i am French) and select HP Deskjet D2400 Foomatic/hpijs (recommended).
9) And click Done
With this Solution, you can just print. All other software possibilities can not run under the Airport. It is normal.
I think all is ok for you.
Message was edited by: thebuzzman

HT4356 I have an HP 4500 printer connected to airport extreme with usb. All our portable notebooks print via air but cannot get iPad to be recognized for printing. Do I really have to have one of the other HPs listed?

I have an HP 4500 printer connected to airport extreme with usb. All our portable notebooks print via air but cannot get iPad to be recognized for printing. Do I really have to have one of the other HPs listed?

Rufus Cat-
Even if it was compatible, AirPrint does not work through a USB link, only Ethernet or WiFi.
I do not see your HP 4500 listed on Apple's list of AirPrint compatible printers. <iOS: AirPrint 101> Therefore you need to take another approach. To start, I suggest you download the free HP App, ePrint Home & Biz. It has limitations, but should get you printing with your existing setup.
There are other printing Apps with more features such as Print n Share and PrintCentral, but they can only be accessed from within other Apps that have the "Open In" option.
Your best option may be to share your computer's printer as AirPrint over WiFi. Programs that are reported to do that well are Printopia and FingerPrint. Your computer must be on and awake any time you want to print. <Printopia for Macintosh> <FingerPrint for PC and Mac>
Fred

Mouse quits w/printer connected to airport extreme

After 2+ yrs w/ no problems, now, mice will not move cursor when HP PSC2410 is connected to Airport Extreme, internet is OK. If I plug the printer directly into the mini, mice work fine. What the........!&%$

After 2+ yrs w/ no problems, now, mice will not move cursor when HP PSC2410 is connected to Airport Extreme, internet is OK. If I plug the printer directly into the mini, mice work fine. What the........!&%$

Imac will not connect to Airport Extreme when configured WPA/WPA2

Imac will not connect to Airport Extreme when configured WPA/WPA2
Posted: Jul 5, 2007 8:22 PM Reply
I just got my Imac to connect to the internet using my Airport Extreme but only by using WEP. I had my Windows XP SP2 machines connecting using WPA/WPA2 with no problem. The Imac will not connect using anything other than WEP, and 1 of the XP machines will not connect using WEP.(I have not tried the other XP machines) I had to set the Airport Extreme for an open network in order to let both computers access the shared hard drive and access the internet.
I don't know what the problem might be and would appreciate any suggestions.
MacBookPro, Imac Mac OS X (10.3.9) Fujitsu tablet PC, 2 XP desktops

hehe...on the visuals. I figured it out already, and I have the old airport card. However, I did a chat with Apple support and while we were chatting I found a USB adapter with MAC drivers which will work. It is:
Hawking Technology HWUG1A Wireless-G USB Adapter with Removable Antenna for Macintosh
Manufacturer Part# HWUG1A
That is the only adapter that actually does WPA/WPA2 that I can find that is for a Mac and not just an older USB that only does WEP. It surprises me that Apple does not have a USB product like this. Anyway, for $56 including shipping, I will have it by Monday or Tuesday. Pretty cool.
Thank you so much for your assistance. It is appreciated.
Lynn

My iMac and iPad keep loosing the wireless connection to Airport Extreme issue started after I installed Lion?

Since installing Lion, I have been loosing my connection to airport Extreme after I have put my IMac in sleep mode. My Ipad is also loosing the connection. This issue started since the installation of Lion, is anyone else experiencing the same thing?

I've had that problem on my macbook running 10.5.8 for a few years. Sometimes it's worse than others. No other computer in my house has this problem.

Airport Extreme sporadically drops printer

Printer: HP DeskJet 6540
Base Station Firmware: Problem present on all firmware revs (most recent two or three)
Issue: At irregular intervals printing fails to the printer from wired and wireless clients. Going to the Airport Utility the Airport Extreme reports no printer.
Fix: In Airport Utility->Manual Setup->Printers uncheck the Bonjour checkbox, click "Update", wait for Airport Extreme to reset, printer reappears as connected, then recheck Bonjour checkbox. Printing works again. Seems to be occurring with greater frequency.
Anyone else seeing this, or is it my base station flaking out?

So I hooked the printer up to my iMac via USB and turned on printer sharing. Much more stable. Easier to manage. Still would prefer to use my Airport since it is an always on device. If anyone shuts down the iMac, the printer is no longer available.

Internet connection via Airport Extreme/router thats not working, why?

I have been having problems with the internet connection via Airport Extreme which I find it a bit unusual and its still driving me nuts! This is what happened:
I have lost my internet connection last Sunday evening upon my return from a weekend away from home. The last time I have used the internet connection on my macbook was the previous Friday morning. Prior to the apparent disconnection on Sunday, I have always used my internet connection wirelessly through Airport Extreme (that is connected via ethernet cable to the NETGEAR DG834v2 ADSL modem which had worked beautifully until the problem arose on my return). This wireless internet connection allowed me to surf the internet anywhere in my home.
However, upon the successful re-connection to the internet via the modem router, I have discovered several new problems. I have tried to set up the internet connection wirelessly again but instead the following happened:
1. Router (Netgear) drops ADSL connection and cannot reconnect when connected to airport via Ethernet. (which is the case when using airport wireless).
2. Router connects to ADSL fine when computer is connected to it via Ethernet. (However, router disconnects when magsafe power adapter is taken out for some inexplicable reason!)
3. Router connects to ADSL fine when nothing is connected to the router (ie. No Ethernet connections)
4. Router connects to ADSL fine when connected to airport via Ethernet and computer is connected to airport via Ethernet.
So from the above, I cannot connect to the internet properly whether wirelessly or not so I suspect it could be faulty router or could it be airport extreme? I have asked my ISP for an explanation and all they have said is that it cannot be the mis-configuration but could be to do with the power adaptors or the way plugs are set up and suggested I take out all the power plugs (and power surge protector) out to switch everything off, the macbook, router, printer and airport extreme. However, when I have re-plugged them all back in, the problems I have described above still persists!
Would appreciate any help if anyone here recognises why this is the case and what seems to be the cause of this. If so, what should I do? Though I have written back to my ISP again yesterday for more help so im waiting to hear from them...
Thanks
u2dougal

I have been having problems with the internet connection via Airport Extreme which I find it a bit unusual and its still driving me nuts! This is what happened:
I have lost my internet connection last Sunday evening upon my return from a weekend away from home. The last time I have used the internet connection on my macbook was the previous Friday morning. Prior to the apparent disconnection on Sunday, I have always used my internet connection wirelessly through Airport Extreme (that is connected via ethernet cable to the NETGEAR DG834v2 ADSL modem which had worked beautifully until the problem arose on my return). This wireless internet connection allowed me to surf the internet anywhere in my home.
However, upon the successful re-connection to the internet via the modem router, I have discovered several new problems. I have tried to set up the internet connection wirelessly again but instead the following happened:
1. Router (Netgear) drops ADSL connection and cannot reconnect when connected to airport via Ethernet. (which is the case when using airport wireless).
2. Router connects to ADSL fine when computer is connected to it via Ethernet. (However, router disconnects when magsafe power adapter is taken out for some inexplicable reason!)
3. Router connects to ADSL fine when nothing is connected to the router (ie. No Ethernet connections)
4. Router connects to ADSL fine when connected to airport via Ethernet and computer is connected to airport via Ethernet.
So from the above, I cannot connect to the internet properly whether wirelessly or not so I suspect it could be faulty router or could it be airport extreme? I have asked my ISP for an explanation and all they have said is that it cannot be the mis-configuration but could be to do with the power adaptors or the way plugs are set up and suggested I take out all the power plugs (and power surge protector) out to switch everything off, the macbook, router, printer and airport extreme. However, when I have re-plugged them all back in, the problems I have described above still persists!
Would appreciate any help if anyone here recognises why this is the case and what seems to be the cause of this. If so, what should I do? Though I have written back to my ISP again yesterday for more help so im waiting to hear from them...
Thanks
u2dougal

HT204057 Time machine back up via USB hard drive connected to Airport Extreme.

Why did Apple stop supporting time machine back-up via USB hard drive connected to Airport Extreme? It worked very well.

Why did Apple stop supporting time machine back-up via USB hard drive connected to Airport Extreme?
Time Machine backups are supported via USB hard drive connected to the AirPort Extreme"ac" version.
Time Machine backups were not supported via USB hard drive connected to earlier versions of the AirPort Extreme.
Some users who tried this on earlier version AirPort Extremes seemed to have some success with Time Machine backups....some had moderate success and some had no success with this. Count me in the "no success" category.
See the topic about Time Machine support for USB disks in this Apple Support document:
http://support.apple.com/kb/HT5924?viewlocale=en_US&locale=en_US

Cannot connect to Airport Extreme. Did I buy wrong product?

Hello
I am having a problem connecting my Airport Extreme Base Station. I have an iMac flat screen PowerMac G4 running Tiger 10.4.11. I purchased the Airport Extreme Base Station in hopes to connect this and other Mac computers in my house to a wireless network. I have a DSL connection through ATT using a SpeedStream 5360 Ethernet ADSL Modem. I have installed the software that came with the base station. I do have an airport card installed, but it is an older one, not the one that you can purchase through Apple now.
I have read and followed all of the directions in the setup manual. I have seen the base station from my computer, I have given it a name, password, etc... but when I try to finish the installation/setup process, the base station continues the flash an amber light. I have done everything I can think of including reseting the base station back to default settings and starting over. Once I got the base station to show a green light... my computer still couldn't connect. In fact it couldn't even see the base station at that point.
Should I have purchased a different base station for my computer, or could it possibly be my airport card? Another computer in my house (older iMac running 10.3) can read a neighbor's un-passworded base station, but can't connect to mine. Does that give any clues?
Any suggestions would be appreciated.
JP

Just to verify... you have connected the Ethernet output of the SpeedStream ADSL modem to the WAN port on the AirPort Extreme base station (AEBS).
Have you also configured the AEBS to use the correct parameters to connect to your ISP?

Cannot connect to internet with iMac connected to airport via Ethernet

Hi all,
Firstly please forgive if this problem has been posted before but unfortunately i haven't yet been able to find a solution to my problem.
I cannot seem to get my wireless network to work since updating my Airport to v5.7. I have reverted back to 5.6 but with no joy. OK, here's my setup - I have an iMac G5 1.8 which is connected to my airport via an ethernet cable (it is plugged into the correct port) and an iBook with an Airport card to connect wirelessly. The airprot is connected to my ADSL modem which is a D-Link 300T. When set up like this my iMac cannot connect to the internet even though my iBook can. When i take the4 iBook and Airport out of the equation my iMac connects fine to the internet via ethernet cable direct to my modem.
As i've said, as soon as i bring in the iBook and Airport the iMac cannot connect via airport extreme, even though the iBook can connect.
I have searched through the discussions looking for clues and answers. I have made sure that distrubute IP address is not checked and that internet sharing is off on my iMac but on on my iBook. I have tried all channels and all possible different settings on the airport admin utility but nothing works.
I hope i've given enough information to give a clear indication what is wrong, if not please ask and i will try my best to answer. Any help would be much appreciated so i can convince my girlfriend that buying my iBook was not "a waste of money!".
Many thanks in advance,
Carl.

Same questions as Paul.
Open up the Network System Pref on the iMac G5.
If you pick Show: "Network Status", what do you see ? Be precise.
If you change Show: to "Built-in Ethernet", what do you see on the TCP/IP, PPPoE and Ethernet tabs ? Again, be precise.
On the Network Status, you should see a green mark next to Built-In Ethernet, which should be at the top. It should also give you an IP address and tell you you are connected to the Internet. Well it would if it was working, so "say what you see".

Why does AirPort Extreme stop working when I plug in a USB hard drive?

Why does Airport Extreme stop working when I plug in a USB hard drive? The USB drive has its own power supply. I've tried isolating the hard drive from Airport using a powered USB hub to no avail.

The USB port on the AirPort Extreme is borderline as far as its ability to supply adequate power to a hard drive. Another way of saying the same thing is that this is not a high power USB port, like you would find on a computer.
Your 2TB drive likely requires a bit more current than the USB port on the AirPort Extreme can supply. It is also possible that the drive's firmware may not support a network USB connection....only a "local" connection to a computer. Check with Seagate support on that possibility.
Try using a powered USB hub with the 2TB drive....and make sure that the drive is formatted correctly in Mac OS Extended (Journaled) or FAT32....which the AirPort Extreme USB port can accept.

Can't connect to airport extreme after installing 10.10

After installing OS X 10.10 WiFi connection with Airport Extreme drops out a couple of different ways. Log in fails, Says Airport extreme is not there (2ft away), drops data connection with all WiFi bars showing.
Drops data connection mid data transfer. Then after sever power recycles of the MacBook Pro connection comes back.
Light on Airport Extreme is blinking. This iMac is also connected passing data via the same Airport extreme while the MacBook Pro is having the above experiences.
Anyone experiencing WiFi issues since 10.10?

You can download the Apple Airport Utility directly from Apple:
http://support.apple.com/kb/DL1547?viewlocale=en_US&locale=en_US
Regards,
Shawn

IMac connected to Airport Extreme stopped detecting printer

Similar Messages

Maybe you are looking for