IMac freeze Snow Leopard 10.6.6

For the last 6 months or so I have experienced annoying "freezes" when the screen (mid session) gives me a colour e.g. dark yellow or red, and everything freezes.
Solution is system force quit and start again.
Tried all sorts of recommended fixes but nothing worked for more than a few days.
Recently (3 weeks ago) adjusted the configure of batch tasks on Main Menu - ticked ALL the boxes, leaving only Update Prebindings. Ran the program and bingo
NO MORE FREEZES Please do not ask me why as I am not a techo.
All I can say it is worth a try as it has worked 100% for my system.
Nice to have my iMac back again.

After speaking to the author of Main Menu, it appears it has some system optimization tasks that it runs that can prevent freezes. Not knowing what those are, you just played your luck chances. I would not always depend on those features to improve your system. System caches and prebindings are often voodoo in their ability to help or harm a system depending on the level of corruption in your system. Before running such a utility again, check here first to verify that's what it is needed.

Similar Messages

  • I have an IMAP mailbox that seems to only show mail 7 days old on my iMac running Snow Leopard.However, all old emails that I have not deleted are showing up on my macbook pro running the next OS (Lion?).  How do I get all my old emails back on my iMac?

    I have an IMAP mailbox that seems to only show mail 7 days on my iMac running Snow Leopard.  However, on my MacBook Pro I can see all old mail that I have not deleted.  It is running the next operating system (Lion?).  Does anyone know how I can get all my old mail back on my iMac.  It is my primary computer and I need some of those old messages.  I have tried to rebuild the mailbox but it has not done anything.

    I have tried to rebuild the mailbox to no avail.  The mailbox behavior says:  Drafts (not checked) store draft messages on the server, Notes (checked) show not in Inbox, Sent (checked) Store sent messages on the server Delete sent messages when (option never selected), Junt (not checked) store junk messages on the server Delete junk messages when (option never selected), Trash (checked) moves deleted messages to the Trash mailbox and (checked)  store deleted messages on the server Permanently erase deleted messages when (one month old option selected).
    I have not set up any rules that I know of other than a signature, in the very least I have not changed any.

  • Microsoft Office 2004 (Word) unable to save files  I have been running Office 2004 on my Intel iMac with Snow Leopard for some time and all of a sudden I cannot save a document. Word just stopped responding and I have to force quit. I can open Word and cr

    Microsoft Office 2004 (Word) unable to save files
    I have been running Office 2004 on my Intel iMac with Snow Leopard for some time and all of a sudden I cannot save a document. Word just stopped responding and I have to force quit. I can open Word and create a new document but I cannot save it. I reinstalled Word but that didn’t help. Then went to the Internet and found at least one other Mac user having the same problem which it suggests is caused by a recent Mac Security Update:
    http://answers.microsoft.com/en-us/mac/forum/macoffice2004-macword/word-2004-wil l-not-open-or-save-documents/b04eb870-9b0d-4f3b-bb47-b122301e36f6
    So I check for a new Mac Security Update and sure enough there was one. I downloaded it and now Word seems to be working, as it should. I can both open and save files. The only problem remaining is that when I open Word I get the following error message “An unexpected error occurred while trying to load the Microsoft Framework library”. I contacted Apple but they were unable to help.
    How can I get rid of this error message?

    Look, I realize you might have to get your machine working, so this is how you revert back.
    Restore proceedure to pre-Security Update 2012-001 v 1.0 & v 1.1
    #1 Backup your personal data off the machine.
    Backup files off the computer (not to TimeMachine). If you don't have a external drive, get one and connect to the USB/Firewire port and simply drag and drop copy your User folder to the external drive, it will copy all your files. It's best to have two backups of your data off the machine when trying to restore.
    Disconnect all drives now to prevent any mistakes from occuring.
    #2 Reinstall OS X 10.6 from disk
    Get out your 10.6 install disk and make sure it's clean and polished (very soft cloth and a bit of rubbing alcohol, no scratches) If your disk is borked, you'll have to order a new one from Apple with your serial number.
    Hold c boot off the 10.6 disk (wired keyboard, internal optical drive), use Disk Utility First Aid to >Repair Disk  of your internal drive  (do not format or erase!!), Quit DU and simply re-install 10.6.
    Note: Simply reinstalling 10.6 version from disk (without erasing the drive) only replaces 10.6.8 with 10.6.x and bundled Apple programs, won't touch your files (backup anyway)  or most programs, unless they installed a kext file into OS X itself. (only a few on average do this)
    #3 Update to 10.6.8 without Security Update 2012-001 v1.0 or v1.1
    Reboot and log in, update to 10.6.8 via Software Update, but EXCLUDE THE Security Update 2012-001 by checkinig the details and unchecking the blue check box.
    #4 Reinstall any non-working third party programs
    When you reboot, make sure to reinstall any programs that require kext files installed into OS X, you'll know, they won't work when you launch them or hang for some reason as they are missing the part they installed into OS X.
    If for some freakish reason you get gray screen at any time when booting (possible it might occur when you reinstall older programs), hold the shift key down while booting (Safe Mode, disables kext files) and update your installed third party software so it's compatible with 10.6.8.
    https://support.apple.com/kb/TS2570
    That's it really.

  • I used Target mode to transfer files to a new iMac running Snow Leopard 10.6.8 from an older Dual core Intel machine (EMC 2105) also on 10.6.8. but originally Tiger 10.4. The operation was successful and I ejected the disk icon from the new machine and po

    IS THE SITUATION HOPELESS
    I used Target mode to transfer files to a new i7  iMac running Snow Leopard 10.6.8 from an older Dual core Intel machine (EMC 2105) also on 10.6.8. but originally Tiger 10.4. The operation was successful and I ejected the disk icon from the new machine and powered down the old machine. When this was restarted the next day there was a grey screen with flashing Mac symbol alternating with a 'no entry' sign and occasionally a question mark.Keyboard and mouse were unusable so k inserted the original instal disc (No.1 for 10.4. with installer 1.0.4) which came with the machine in 2006 in an attempt to boot from this. The ensuing window said this was not possible and now it cannot be ejected.I have tried everything ! It offers Disk Utility and other options like Terminal but that doesn't work either.I 'repaired disk' and that was pronounced o.k. None of the various keystrokes at start up will work, and the computer will only offer the installer disc continually.The only option would seem to be is to erase the hard drive completely from the disc in the machine.I don't want to do this as there is still material which I need to recover. I think the drive has in some way been corrupted by using it in target mode, and I don't know if there are any other options to try.
              Please tell me how to get this disc to eject !

    Graham Giles wrote:
    Have you seen this type of problem before? I think it could be a serious issue for anyone in a similar position.
    No; but then, I've not had occasion to use TDM. I've been using firerwire drives for over 10 years, both FW400 and FW800, with no issues except a bit of instability using a B&W G3 machine.
    TDM should be safe. Using cautious, manual copying of files from the Target machine to the Host machine should not result in unexpected loss of files or damage to the Target drive's directories. It should behave exactly the same as if it were an external (to the Host) firewire drive.
    •  I don't suppose there is anything I can do to 'put back' lost items from a separate Time Machine drive which has an up to date backup on it.
    There is probably a way to do that - seems to me that's one of the reasons for a Time Machine volume.
    On the other hand, if the Time Machine volume is rigidly linked to the now-absent OS on the original drive, there may be no way to effectively access the files in the TM archive.
    I know that using a cloned drive would work well in this instance.
    I have no experience with Time Machine, so perhaps someone who has will chime in with suggestions.
    With the machine in TDM with the other machine, have you tried running Disk Utility to see if you can effect repairs to the drive?

  • I have an imac with snow leopard. I do not have enough memory to get lion. I switched my  mail  to icloud and now my ipod touch has icloud.  i can receive mail on my ipod touch and through the icloud web site, BUt I cannot receive mail on my mac directly

    I have an imac with snow leopard. I do not have enough memory to get lion.
    I switched my mail  to icloud and now my ipod touch has icloud.
    i can receive mail on my ipod touch and through the icloud web site, BUt I cannot receive mail on my mac directly any more. There is an exclamation point on my mail in box and also an ! on .mac.
    Can anyone help me with settings so I can receive mail again directly on my mac?
    Thanks
    Mathmarv
    <Edited by Host>

    See this Apple note on troubleshooting icloud mail: http://support.apple.com/kb/TS4002
    You may have seen this page already: http://www.apple.com/support/icloud/mail-notes/

  • I upgraded my 3 yr old iMac to Snow Leopard and now my HP C4150 Scanning function doesn't work (not recognized).  I downloaded updated Drivers from the HP site, but still no joy.  Any suggestions?

    I upgraded my 3 yr old iMac to Snow Leopard (OS X 10.6) and now my HP C4150 Scanning function doesn't work (not recognized).  I downloaded updated Drivers from the HP site and installed them, but still no joy.  Any suggestions?

    aspaceman,
    Perhaps I owe you an apology.   Having re-read that downloading from HP was unsuccessful I feel uncomfortable.  Can I suggest you update your 10.6 system (as noted in your profile) to 10.6.8 (if it is not already there) by using the
    Mac OS X 10.6.8 Update Combo v1.1 combo update plus any software updates that then apply.  

  • My 2006 iMac running Snow Leopard won't boot even after erasing and re-installing Snow Leopard (via my MacBookPro), either from the HD or DVD drive.  Can't get it to run Hardware Test.  Disk Utility says disk OK - files are there. What can I do?

    My 2006 iMac running Snow Leopard won't boot even after erasing and re-installing Snow Leopard.   I erased and re-installed by putting the iMac in Target Disk mode and usin my MacBookPro as the host.  But after numerous attempts I still can't get it to boot either from the HD or DVD drive. I just get the white screen after the wheel stops spinning.  I can't get it to run Hardware Test - just get the white screen.  If I use Disk Utility via my MBP it says the disk appears OK. All the Snow Leopad files appear to have been installed. What can I do?

    Hi-NRG Bwoy wrote:
    I erased and re-installed by putting the iMac in Target Disk mode and using my MacBookPro as the host.
    Reet the SMC and the PRAM
     Cheat sheet to help diagnose and fix your Mac
    Perhaps you installed the wrong version OS X onto the iMac, you can't use the disk from another Mac.
    clean the disk.
    If it's not working then use this method to create a bootable 10.6 USB from the iMac machine specific 10.6 disk or the 10.6.3 retail disk on your other Mac, use it to boot the iMac with.
    http://www.maciverse.com/install-os-x-snow-leopard-from-usb-flash-drive.html
    How to erase and install Snow Leopard 10.6

  • My iMac running Mountain Lion can't see my iMac running Snow Leopard on my network.

    My iMac running Mountain Lion can't see my iMac running Snow Leopard on my network.  Both Macs work fine and the SL Mac can see and connect to the ML Mac.

    There isn't a script.
    Mail connects to any standard email server.
    Open the Connection Doctor from the Window menu.
    Click Show Details and Check Again.
    What errors does it post trying to connect to your email provider.
    I dont' think there is any personal information in the output, but you might want to sanitize the output in a text editor before posting the output here in case there is a login user name or something like that.

  • Is there a way for my macbook air (running Lion) to access an external hard drive on my Imac (running snow leopard) specifically for Iphoto and itunes?

    Is there a way for my macbook air (running Lion 10.7.2) to access an external hard drive on my Imac (running snow leopard 10.6.8) specifically for Iphoto and itunes?

    Yes. For those two applications specifically there is sharing. This presumes both computers are on and connected to the same network.
    In iPhoto, enable sharing by (on the iMac) going to the iPhoto menu > Preferences > Sharing > check Share my photos. You can either share the entire library or only selected albums. Now on your MacBook Air, in iPhoto, go to the same preference pane and select Look for shared photos.
    iTunes has something similar. In the iTunes menu > Preferences > Sharing > check Share my library on my local network. On the other computer, look in the left column for SHARED and select the iMac. You can now play that music on the MacBook Air.
    There are other ways to share files but for those two applications this is the simplest way.
    Best of luck.

  • Does anyone know if I can download photoshop cc on my imac - running Snow Leopard 10.6.8 ? will it all work?

    Does anyone know if I can download photoshop cc on my imac - running Snow Leopard 10.6.8 ? will it all work?

    10.7.x or newer is the system requirement for CC:
    http://helpx.adobe.com/photoshop/system-requirements.html

  • Problem installing officejet pro 6830 software on my iMac running Snow Leopard

    Greetings, I have a problem installing officejet pro 6830 software on my iMac running Snow Leopard.  When I insert the HP software disc onto my iMac, and go to the HP website, it says:
    "403" Ooops!  Request forbidden...
    Any possible solutions to this?  Thanks for any feedback...

    Hi @RNOjetnow ,
    Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue with needing the drivers for the 10.6 Snow Leopard OS.  You should be able to install the Apple Drivers just by connecting the USB cable.
    Here is a document that might help.
    Hope this helps you install the drivers.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Keyboard viewer on my iMac (running Snow Leopard) recently has lost small size. Green " " button is just moving big keyboard size up. I would appreciate  a hint how to fix it. Alex

    Keyboard viewer on my iMac (running Snow Leopard) recently has lost small size. Green "+" button is just moving big keyboard size up. I would appreciate  a hint how to fix the problem. Alex

    You can resize the keyboard window, positioning the mouse pointer at the edge of the window, clicking and dragging to the desired size.

  • HT1758 Are all Intel 24" iMacs w/Snow Leopard OK for Mountain Lion?  My serial number doesn't match any of the one in the iMac ID list; they all start with "MA" or "MB", mine starts with a "W." Purchased direct from Apple August 2007.

    Are all Intel 24" iMacs w/Snow Leopard OK for Mountain Lion?  My serial number doesn't match any of the one in the iMac ID list; they all start with "MA" or "MB" and mine starts with a "W." Purchased direct from Apple August 2007.

    Macs that can be upgraded to OS X Mountain Lion
    iMac (Mid 2007 or newer)
    MacBook (Late 2008 Aluminum, or Early 2009 or newer)
    MacBook Pro (Mid/Late 2007 or newer)
    MacBook Air (Late 2008 or newer)
    Mac mini (Early 2009 or newer)
    Mac Pro (Early 2008 or newer)
    Xserve (Early 2009)
    Open System Profiler and report what you find displayed for the Model Identifier.

  • Using iMovie 7.1.4 on an iMac w/ Snow Leopard; HD video imported with a Firewire cable transfers fine, but audio arrives with major static; problem persists w/ different cameras

    Using iMovie 7.1.4 on an iMac w/ Snow Leopard; HD video imported with a Firewire cable transfers fine, but audio arrives with major static; problem persists w/ different cameras & Firewire cables; source DV tape has no audfio static.

    I forgot to write down my computer specs:
    iMac 27 Mid 2011
    2.7 GHz Intel Core i5
    4 GB 1333 MHz DDR3
    AMD Radeon HD 6770M 512 MB
    OS X 10.9.2

  • I have a 27inch iMac with snow leopard and 1 user, and a 24 inch (older) upgraded to yosemite and 5 users. I want to wipe the 27 inch and transfer everything on the 24 to it. I do have time capsule 3tb but not sure how to do it

    I have a 27inch iMac with snow leopard and 1 user, and a 24 inch (older) upgraded to yosemite and 5 users. I want to wipe the 27 inch and transfer everything on the 24 to it. I do have time capsule 3tb but not sure how to do it

    Move your content to a new Mac - Apple Support

Maybe you are looking for