Imac hard drive issues

Over the last two days, my imac has been playing up. When doing anything the harddrive starts clicking, the colour wheel starts going... and everything freeezes up. it happenes constantly.
Am running updates now, but I suspect the harddrive is on its way out. Although, disk utilitly says there are no problems with the drive, and the smart status is ok.
Is there any way I can find out what is causing this? I notice it most when playing videos in itunes or front row... but now its even starting to happen while typing away in safari.
Thank god for time machine!!
Any help?

Hi, you could try an Erase/Install...
Run OnyX...
if the IHD is going -> then prepare by backing up everything.....L

Similar Messages

Slow iMac and Time machine won't recognize iMac hard drive

I have an older iMac (2.16GHz Intel) that is upgraded to OSX10.6.7. Recently it has been running very slow (although it did not seem to correlate with any particular install that I know of). I have looked at the Activity Monitor and cannot find anything that is consuming vast amounts of memory (although I can't say that I really know what I'm looking for exactly, just no high numbers). I did a Safe Boot and it is still really slow there (EXAMPLE of slow is taking several minutes to open a program or taking 27 hours to download my pictures (which only took 13 minutes on my MacBook)). I know my iMac could use more memory (1G), but the slow problem is there even if only running one program. I can't find a particular pattern to it, it just hangs up and then comes back most of the time. It did however start shutting itself down recently. I finally got into disk utility (I've been trying to run disk utility and it usually goes into an eternal spin that I can't even force quit - have to hard boot). So from disk utility I ran verify disk in first aid - it says "the volume Macintosh HD appears to be ok." I"m not sure what else I'm supposed to do in here either. So my first question is Does anyone have any other suggestions for the slowness? Second, in the meantime I'm desperately trying to back up my data on the time machine that I stupidly have never set up as a back up. I can manually put files one at a time over there, but if I try to use it as a time capsule (system preferences, time capsule on) my hard drive does not show up as one of the options???? My external drive and the data that is already on the time capsule show up, but not my iMac hard drive. So my second question is How do I get my time machine to see my hard drive or is there another way to get my files to move over there? I realize I'm in trouble, any help would be greatly appreciated. I've tried to provide as much info as possible. Maybe there is something obvious I'm missing.

My own response, or rather an update: I took the computer up to the Genius Bar - my hard drive is bad. They are going to try to rescue my data. For those of you reading this with a similar problem, make an appointment and go to the Apple Store if you can. Mike, my personal "genius" for this encounter, said that stressing the machine when the hard drive is going bad just risks damaging it more. If you potentially have a hardware issue, take it and let them determine what is wrong. They have tools and diagnostics most of us wouldn't know how to use if we read about them here - and they have ways of retrieving data (I hope) that most of us do not have. Please note that disk utility said my hard drive was ok, but the diagnostics they did showed that in fact my hard drive was much less than ok, but it was still "mounting" hence the disk utility reporting it was ok. It is over an hour drive for me to get to the Apple store, and I only wish I had gone sooner.

Imac hard drive replacement

Incredibly my rarely used 2011 Imac Hard Drive is toast. I saw they have a replacement program but even though it is way too soon for a hard drive OF QUALITY to be going out so soon as mine - mine is not included in the replacement program.
Which I have a problem with - how odd it is that they had enough trouble with these computers/hard drives to do a replacement program but mine which did the same thing, expired way too soon isn't covered. I've not had use of the computer for 4 months while I tried to fix the problem so it lasted a little over a year.
Anyway I need to know what to do to try to replace it myself as i haven't the funds to take it to Apple for repair. Plus, Apple Computers and me are history I will never buy another after spending over $1200 for a computer that's nothing more than a very large paperweight right now.
How do I know what size and all that?
I may not be able to afford even that so more than likely this is going to be a very nice looking worthless computer going to the landfill.

I Am leaning more toward Kappy's comments, based on your attitude and comments, but I will ask some questions and add some useful comments as I am in a somewhat charitable mood.
Do you still have AppleCare on this iMac?
From your rather blunt comments I assume no, but have to ask anyhow.
This is why I recommend purchasing and registering for 3- year extended AppleCare.
Because of the nature of the newer iMac designs, hardware failure seems more likely or commonplace occurrence. I believe it's more of a excessive heat related issue than anything else despite what Apple has qualified as "normal" operating temps for these iMac models.
Check out the iFixit home site and search for iMac disassembly or tear/take down. Or search for iMac hard drive replacement on the site.
Another option is for you to purchase an external FireWire 400/800 drive as your new boot drive.
Running your iMac from a FW800 drive will be about as fast as running it from the iMac's Internal drive.
If you can afford it get as large a drive as you can afford.
And just for your info, while hard drives can last for years without issue they will go bad, eventually.
Some drives crash and burn faster than others. Especiallly true of the notebook style drives that Apple installs into the newer design iMac. With hard drives, the question is not if they will fail, but when will they fail.
If you had all of your data backed up to an extra, external drive or optical discs to begin with, you wouldn't be so upset about your internal drive dying as your data still would've been intact on another drive or discs in the first place.
I Always advocate for having some sort of backup strategy for your important data in the event of hardware or hard drive storage failure.

My iMac hard drive is full, and I don't know how to fix it.

My iMac hard drive is full. Approximately 495GB of "Other" is crushing it. I saw some threads online refer to this issue ... something to do with ASL files. Can anyone help?

First try to download OmniDiskSweeper then launch that to sweep the drive this will give you information on the size of your files and folders. This will give you a starting point as to what to do with your large files you can move them to an external hard drive or delete them within the program. Note: Be careful of the items you delete.

Can anyone recommend software to scan iMac hard drive for errors

Hello Apple Community
Can anyone recommend software to scan iMac hard drive for errors/defects/corruption?
I've been having problems with hard drive for months and it finally froze on me so I reformatted and restored from Time Machine.
Everything is fine now but I just have a feeling I will see the same problems occur because I simply restored to the exact moment from where I was having problems (i.e. Finder crashing/permissions issues/Volumes unmounting/Trash not working/Random error messages/Computer crashing when opening or saving PNG).
I read that sometime Disk Utility doesn't always pick up on a defect or corrupt hard drive. The whole time I was having problems Disk Utility said HD was ok.
Is there software that can do a better job of scanning hard drive for errors and let me know if I need to get HD replaced?
Thanks
Brad

I agree with both. Most important though is you backup your data frequently*:
http://www.macmaps.com/backup.html
That way if a problem should arise, and it is a result of the hard drive actually dying, you won't accidently kill the hard drive in the process of trying to detect errors.

IMac hard drive making a chirping noise!!

IMac hard drive making a chirping noise!! Its a quiet chirp that goes along with the hum of the hard drive. It doesn't always do it but I'm worried anyways. Has anyone else had this problem? Is it a problem?

They told me it's likely the CPU Fan - a known issue - and said that resetting the SMU was the first step towards fixing it. I performed that reset, but the crickets in my machine are still alive and chirping. Step #2, as it was told, is to take the machine back to the Apple service center to be repaired. BUT - looking through other threads here on the same issue, it looks like the issue is currently handled by replacing the CPU fan with another identical model and that because the underlying engineering issue has not been fixed, the crickets will return.
So if this problem is not harmful to the computer, I may be ignoring it for the time being.
Regarding the recalls though, where did you find the serial number range for the recall? I should check mine against that list.

Sometimes my computer takes too long to connect to new website. I am running a pretty powerful work program at same time, what is the best solution? Upgrading speed from cable network, is it a hard drive issue? do I need to "clean out" the computer?

Many times my computer takes too long to connect to new website. I have wireless internet (time capsule) and I am running a pretty powerful real time financial work program at same time, what is the best solution? Upgrading speed from cable network? is it a hard drive issue? do I only need to "clean out" the computer? Or all of the above...not to computer saavy. It is a Macbook Pro osx 10.6.8 (late 2010).

Almost certainly none of the above! Try each of the following in this order:
Select 'Reset Safari' from the Safari menu.
Close down Safari; move <home>/Library/Caches/com.apple.Safari/Cache.db to the trash; restart Safari.
Change the DNS servers in your network settings to use the OpenDNS servers: 208.67.222.222 and 208.67.220.220
Turn off DNS pre-fetching by entering the following command in Terminal and restarting Safari:
defaults write com.apple.safari WebKitDNSPrefetchingEnabled -boolean false

I upgraded my imac hard drive to a 2tb drive. how do i use time machine to get my computer back to normal?

i upgraded my imac hard drive to a 2tb drive. how do i use time machine to get my computer back to normal?

Thank you. I followed the faq#14 (using setup wizard from the osx install disk). Everything went just as planned until I woke up this morning and noticed there was no progress on the "transferring documents" meter. It stopped about 1/4 of the way. I can hear the computer working and the bar is somewhat animated like it is advancing but it's not.
Should I cancel and restart or should I wait it out? It already been about 13 hours since I started the process. Do you think it is my time machine or my iMac? Maybe the time machine file is corrupt or something.
Anyway, any help is appreciated. Thanks.

Hard drive issues after update 10.10.3

Question also posted here:Hard Drive Issues (Both new and old)
I'm trapped in a HDD nightmare with my MacBook Pro mid-2012.
I updated to Yosemite 10.10.3 (with the Photos app). A couple of days after the update, I was watching a movie on my TV screen via HDMI. In the middle of the movie I removed the HDMI cable from the MacBook Pro and everything freezes. I forced shut down (Note: My HDD was encrypted). After I forced shut down, I tried to turn on and the loading screen would never stop loading - like, 14 hours stuck with the progress bar. Since I have backups, I decided to access DU and format my HDD. I tried everything. For real. Every command line I could type on Terminal to format, repair, erase and/or partition. I read almost every issue-related questions on the forums and stack exchange groups for a week (even posted my issue here: http://apple.stackexchange.com/questions/181090/erasing-and-partitioning-hard-dr ive-from-internet-recovery?noredirect=1#comment215695_181090).
So, I decided that it was a HDD failure and bought a new one.
I bought the Seagate 1TB SSHD Hybrid - ST1000LM014. Installed the new fresh disk and guess what? All those same problems again. I´m not able to restore from Time Machine because it doesn't recognize the disk in the restore page. But the disk is recognized in the DU. When I try to erase or partition the new SSHD, the same old errors: File system formatter failed. Yes, I tired GUID Partition Table, all of the security options, etc.
Please. Any light that you can throw at this issue, I'll be very grateful for. BTW, the new SSHD is recognized and the SMART Status says: Verified.
Any ideas on *** is going on?
Thanks in advance!
MacBook Pro (13-inch Mid 2012), i7, 8GB RAM

After I erase the hard drive (I assume one pass of writing zeros is good enough, 7 passes not needed?) do I turn off the laptop, then turn on and insert the Install Disk? Will there be a prompt telling me when to put in the disk? Or do I put in the disc right after erasing?
One pass is fine. If you've previously backed up your hard drive to an external hard drive using SuperDuper!, which is what I use and recommend, or another program, if it created a bootable drive, you want to boot off of it, bring up SuperDuper! and copy the drive back to the internal hard drive. SuperDuper also makes the drive bootable. When done, reboot, and you should be all set. If you're using Time Machine, you'll want to install the operating system, then restore the Time Machine backup. SuperDuper! is available from http://www.shirt-pocket.com/superduper/superduperdescription.html
Finally- should I update the OS? Is there a problem with the newest update that caused this crash, or was it just a spurious glitch/bad luck?
I've been running 10.5.8 for awhile with no issues, and would recommend moving to it.

Ello, I changed my Imac hard drive which no longer worked. I installed a hard drive Western Digital 500 GB 7200 rpm SATA3 WD5002AALX 32M Black. Sometimes I see the hard disk in the utility on the Starter CD, but access seems very slow. By cons when I want

Hello, I changed my Imac hard drive which no longer worked. I installed a hard drive
Western Digital 500 GB 7200 rpm SATA3 WD5002AALX 32M Black. Sometimes I see the hard disk in the utility on the Starter CD, but access seems very slow. By cons when I want
install OS X 10.4.2 on the hard drive, I do not see the disk. What is the problem?

Thanks for the help
I started on the installation CD OS X 10.4.2, I used Disk Utility
to partition the disk according to the document that you have proposed. unfortunately
I have not succeeded. When I partition the disk, even if I called it Macintosh HD, it
does not keep the name and it shows disk0s3 instead. I did an erase on disk.
When I mount the disk it tells me that I must repair. When I tried to repair, I got
the following message:
Volume check failed
The underflying task reported failure on exit
1 HFS volume checked
1 volume could not be repaired because of an error.
I also had a message:
Invalid b-tree node size.
Note: The disc is new, but it has already been formatted on a computer Imac 27 inch 2011 OS X Lion.
I used a USB 2.0 to SATA cable to adjust the formatting.
What to do to fix it?

How do I find my tab history? I had hard drive issues and when I launched my browser after getting it back their was no "restore session" option. I know a tab history is kept, just don't remember where or how to exercise it. Thanks

Question
How do I find my tab history? I had hard drive issues and when I launched my browser after getting it back their was no "restore session" option. I know a tab history is kept, just don't remember where or how to exercise it. Thanks

Firefox 4 saves the previous session automatically, so there is no longer need for the dialog asking if you want to save the current session. 
Use "File > Exit" or "Firefox > Exit" if you want to restore multiple windows. 
You can use "Firefox > History > Restore Previous Session" to get the previous session at any time. 
There is also a "Restore Previous Session" button on the default about:home Home page.
Another possibility is to use:
* [http://kb.mozillazine.org/Menu_differences Firefox (Tools) > Options] > General > Startup: "When Firefox Starts": "Show my windows and tabs from last time"

Toshiba Satellite a505-6005 hard drive issue and questions regarding options I may have

Issue: start up computer and windows does not start. It eventually goes to a startup repair screen and eventually says "resolving disk errors...", and that's if it even gets to that screen. Unfortunately I never made a recovery disk or system image discs (I know that was not smart). I did however kept my files backed up so that was good.
Steps I took: Took it to Best Buy and the tech advised me that the Black Tie 2 year protection had expired on Jan 30th 2012, and so it could not be repaired for free. I asked the tech there how much it would cost to fix and they had advised me that it was most likely a hard drive issue and that it would cost nearly $400 to replace/fix it. So I decided to buy a new Asus K53E-BBR14 laptop since it was not much more. When I got home and loaded everything up and got the computer to how I want, I went ahead and made a recovery disc and system image disc's. I tried using the recovery disc that I had made with my Asus in the Toshiba laptop and boot it from the dvd drive and it did not get anywhere. So I ASSUME that it really is a hard drive error because the RAM worked just fine in my new laptop and "repairing disk errors.." means something is wrong with the hard drive:
Now that you know the background of what has happened my questions are as followed:
1. Can I buy a new hard drive for the Toshiba and use the recovery and system image disc's i created on the new hard drive that i install in the toshiba? and just removed the bloatware from Asus (or does that not even get added to the disc's I created)?
2. If so, will it prompt me to enter the Windows 7 product key? and therefore using the product key located on the bottom of the toshiba?
3. What other steps could I take to make this toshiba laptop salvageable? This way i can turn around and sell it.
Thanks,
Russell States

Also,
I noticed that i can purchase (well pay the shipping anyways) recovery media from Toshiba. Can I use that on a new hard drive installed in the toshiba?
BTW ran the Windows Memory Diagnostics Tool and no problems were found with the memory. and i do not care about the old hard drive as I have MY files backed up. I just want to try to get this toshiba laptop back to being "like new".
Thanks,
Russell

Incredibly slow MacBook, Internal Hard Drive issues...

Good morning everybody! I'm apologize if this post is extremely wordy...
I am extremely baffled by a particular issue with a MacBook 2.0GHz C2D which belongs to a friend of mine. The warranty is expired.
_Brief history:_
Several months ago, this MacBook could not find a bootable volume. The drive would not mount when booting from an external FireWire hard drive. It would not mount when the MacBook was put in Target Disk Mode and connected to another Mac. When booting from an external USB hard drive or with my MacBook Pro connected to the MacBook via Target Disk Mode, the MacBook booted up quickly. I came to the conclusion that the internal hard drive must have failed and needed to be replaced. Ultimately, the data was not recoverable from this drive.
I then proceeded to swap out the defective Apple OEM Seagate hard drive with a known working Apple OEM Fujitsu hard drive. When booting from the Leopard Install DVD, the MacBook would boot incredibly slow, but would finally reach the Installer Language screen. When proceeding to install Leopard, the drive would take a very long time to have data written to it, and ultimately the install failed. I removed the new hard drive from the MacBook and placed it in an external USB enclosure, attached it to the MacBook and booted from the Leopard Install DVD. Leopard would install successfully. I removed the hard drive from the enclosure and reinstalled it the MacBook. When booting from the freshly installed OS, the MacBook would take a very long time to boot. The MacBook is extremely slow!!!
I checked the Activity Monitor to ensure CPU & System Memory Usage was not going crazy. All Processes where normal with adequate CPU & Memory headroom.
I took the MacBook apart thinking that the SATA Controller Cable might be loose. No, it was firmly in place. I reassembled the MacBook and booted it up again. Still incredibly slow!
Finally, after several reboot attempts, the MacBook would book up quickly and operation was perfect. I applied all updates and continued testing the MacBook with great success. Gave my friend his MacBook back and he was grateful.
_Now for the kicker..._
My friend brought me his MacBook a week ago complaining that the MacBook was operating extremely slow (much like when I was initially testing it before). I verified the MacBook was slow when I tried using it. I tried several reboots and then it would get stuck on the gray Apple with spinning gear.
I tried booting into Single User Mode, but it gets stuck on "Waiting for root device"
I put the MacBook in Target Disk Mode and connected it to my G5 2.0GHz Dual Core. The hard drive would mount quickly on the G5 and I used Disk Utility to create a Restore Image. The disk operation would perform normally and the image would be created successfully.
I then partitioned the MacBook's hard drive when connected to the G5, ejected and proceeded to attempt OS reinstall. No dice! The hard drive is not even detected by the Disk Utility on the Leopard Install DVD.
Finally after several reattempts, the hard drive is recognized, but is extremely slow when trying to reinstall...and again, ultimately install fails. Using Disk Utility from Leopard Install DVD, the hard drive fails to unmount when I try formatting.
I don't have Apple Hardware Test disc for the MacBook or Apple Service Diagnostics disc for this model. Running TechTool Pro shows hardware to be okay, disk controller onboard the Fujitsu drive is okay, but running SMART & Surface Scan takes a long, long time (which I'm certain will ultimately error out). Running Drive Genius takes a long, long time as well.
Conclusion:
I think the SATA Controller Cable is defective. I can't think of anything else that would cause disk errors or performance issues like this. Your input is truly appreciated!

Even though no one responded to my post, I thought I'd share the resolution with the entire Apple community. I hope this information will be helpful to some of you with MacBooks or MacBook Pros that may be running painfully slow or may be exhibiting hard drive issues because your machine won't recognize the boot drive or fails to properly boot on a perfectly healthy S.M.A.R.T. verified hard drive. It just might be the hard drive connector/cable. Here it goes...
I visited my local Apple Retail Store and asked a "Genius" at the Genius Bar about this issue and told him my thoughts about a possible failed hard drive connector/cable. First, he didn't even know what a hard drive connector was! Then, he arrogantly stated that he never heard of such a thing and that these cables never fail. Finally, he blatantly dispelled this as a possibility.
On the contrary with my experience, I have had many failed PATA controller cables that required replacement when supporting the desktop PC's at work. I have personally owned and supported many Apple manufactured laptops and desktops and have never encountered this issue on a Mac...until this MacBook!
So, after looking at the Service Manual for the MacBook, I went over to my local Apple Authorized Service Provider and purchased the Hard Drive Connector Apple Part #922-7579. I replaced the original cable, reassembled and proceeded to boot the MacBook with the Leopard DVD installer. The Fujitsu drive was immediately recognized and was able to be formatted and Leopard installed without incident. The MacBook boots off the internal hard drive as normal again and works nice and fast again.
Thank you all for your time!
:D

What's happening with my iMac hard drive?

I was on Disk Utility the other day, and a message was displayed on my screen. It said... "This drive has a hardware problem and cannot be repaired. Back up as much data as possible and replace the disk. See an authorised Apple dealer for more information." This message was referring to my 1TB ST31000528AS internal iMac hard drive. What is causing this problem? Does this have something to do with the fact that BOOTCAMP was installed on my computer? What should I do?
Thanks in advance.

Contact Apple or your local AASP > Apple - Support - iMac - Service FAQ

Permissions Issue, Colour Wheel, Hard Drive Issue??

Hi!
I have had issues with my mid 2009 MBP recently and I'm wondering what the best way to fix them would be.
First off, I have some major permissions issues with my accounts. I am using 3 different users regualrly on the same machine and needed to access files from the home folder so I changed them a long time ago, and am not sure how to fix that. I have repaired the permissions countless times in the disk utility and it seems like there's always loads more to do each time. When I varify the disk, it says its all okay.
Secondly, I have had the machine freeze on me several times while doing very little on it. This happened awhile ago, and thought that it was just the permisions thing and so I did that again, and it started working better, for awhile. It would go a few days or weeks before doing the same thing, sometimes not even getting past the apple logo on startup before freezing. This makes me think it may be a hard drive issue???????
This morning, I tried dozens of times to boot, with no success at all..... until about the 25th time when it miraculasly booted. I have run permissions repair a few more times and it seems to be working okay at the moment, but the problem seems to be happening more often over time.
To complicate matters, I am traveling at the moment and will not be home for several months. I purchased an external harddrive last night and was able to successfully back up my data.
Question 1: Is it the permissions that are causing these problems, or is it related to something else. The computer seems to work fine when its working, and then once in awhile, decides its not going to do anything.
Question 2: Would upgrading to Lion (currently running 10.6.8) fix the permissions issues or just carry them forward? I would like to consolidate the 3 users into one, if that would solve it. Does the migration utility preserve permissions or does it give you a brand new start?
Question 3: If neither solving the permissions or the OS upgrade would fix the problem and it does need a new harddrive, is it possible to buy one and install it myself? I do not have apple care left on this machine and am on a very tight budget. I am used to taking things apart and all that as part of my job and it seems simple enough. Where can you buy a replacement??
Hopefully someone out there will be able to help me out on this one.
Cheers!!!!
Brian

bgroot422 wrote:
First off, I have some major permissions issues with my accounts. I am using 3 different users regularly on the same machine and needed to access files from the home folder so I changed them a long time ago, and am not sure how to fix that. I have repaired the permissions countless times in the disk utility and it seems like there's always loads more to do each time. When I verify the disk, it says its all okay.
Disk Utility permissions are separate from User account permissions.
This link is how to fix them
https://discussions.apple.com/thread/2181549?start=0&tstart=0
Disk Utility will always show something to be needing repair, but that's ok
Apple supoort doc.
https://support.apple.com/kb/TS1448?locale=da_DK
Verify Disk is good, that's a good thing.
To complicate matters, I am traveling at the moment and will not be home for several months. I purchased an external hard drive last night and was able to successfully back up my data.
Your data is backed up, hopefully not with TimeMachine alone, but if you did, then get another drive and backup data manually to that as well. If the TM drive gets messed up, it's a pain to get your data off of it.
Question 1: Is it the permissions that are causing these problems, or is it related to something else. The computer seems to work fine when its working, and then once in awhile, decides its not going to do anything.
Well you could call Apple for replacement 10.6.x disks, and just reinstall 10.6 and bundled programs, but this can kick out kext files out of the /System/Library/Extensions folder installed by some third party software.
This method fixes OS X, but doesn't touch your files or most programs.
Nor will this method fix your Users accounts if the issue is in there.
A creation of a new user, then deletion of the others, return files from backup (set permissions) will fix User folder issues if the above user permissions fix doesn't work.
(Of course you could wipe the drive from the 10.6 disk, but you have to install all software again)
Would upgrading to Lion (currently running 10.6.8) fix the permissions issues or just carry them forward?
No, you don't want to install Lion, it won't fix those issues in User folders, not only that Lion has it's own issues and doesn't work with a lot of older software etc. No use clusterfscking a already bad situtation when it's seems it's only localized to the User accounts.
I would like to consolidate the 3 users into one, if that would solve it.
Yes that could very nicely and tidy up things in the process.
What you do is transfer all files to one regular powered storage hard drive.
(Don't use/disconnect the TimeMachine drive for this as it preserves the users seperated and you don't want all those users back restoring with Migration Assistant)
Create the New User on the machine as Admin, log into it and delete all the other Users, transfer all your files back from the regular storage drive, changing all the permissions to yourself before placing them into their respective folders as they will have three different permissions.
Notes:
If you have a extensive iTunes playlists on one User (say #1), then create the new user with that same name (will require some work, create User 4, delete Users 1-3, reboot, create User 1, delete User 4) then transfer your iTunes folder to Music of that User 1 (same name as before). This will preserve the pathnames of your song locations and your playlists will be preserved.
(before you ask, no you can't combine playlists)
Also if you have photo's in iPhoto Library, you have to right click on it and "show package contents" inside is a folder called Originals, copy them out and import into the iPhoto of the User #1.
Does the migration utility preserve permissions or does it give you a brand new start?
Yes it preserves user permissions, no it doesn't give you a brand new start. Only a fresh install, creation of new users and then just transferring of files does that.
Nothing about TimeMachine or Migration Assistant gives one a "fresh start", it's if hosed, so is your restore.
If you want that sort of pristine protection, you need to clone your ideal boot partition/drive using Carbon Copy Cloner (free/donationware) occasionally as a hold the option key bootable drive, then you can erase and reverse clone the pristine saved clone.
One can also update the clone on occasion, this way keeping the clone pristine.
I maintain 3 clones time dated, even have my boot drive partitioned 50/50 and auto-cloned, this way I have two boot partitions on the road and two externals at home.
I never use TimeMachine, it's not bootable (well it is on 10.7.2 only to restore though)

Imac hard drive issues

Similar Messages

Maybe you are looking for