IMac Intel or iBook?

I want to spend £1000 on a Mac...I'm tempted to go for an Intel iMac, but I'm also keen on a laptop of some kind.
I know that it depends on whether I want to take a computer with me to places, but there doesn't seem to be any laptop equivilent to the Intel iMac, apart from the MacBook Pro, which is a bit flash for me.
Would you recommend an iMac or, say, an iBook?
iMac 600Mhz Snow Mac OS X (10.3.9)

Without knowing how you are going to use it - what apps and such - it really is hard to make a recommendation.
If you are not using pro-level apps that will need to run through Rosetta and if you do not want to take the performance hit that entails - then get a PPC-based Mac like the iBook. If universal apps are available for what you do, then don't hesitate to buy and Intel-based Mac.
Then there is the issue of portability. Obviously the iMac is much larger than the iBook, but if it is never going to move, then you are giving up power for portability that you will not take advantage of.
You are really asking about two very different machines. Keep in mind that a computer is only a tool, and without knowing what job it is to do, no one can give advise on which tool to buy.

Similar Messages

Loading Leopard onto iMac dual intel from iBook softwareG5 computers

I have iMac G4 and iMac dual intel (G5?) computers and just bought iBook with OS 10.5 software on CD. Desire to have at least the iMac dual intel using the same OS, but the software will not load on the iMac intel G5. Both computers have essentially the same memory, etc. Do I have to spend another $129 do get both OS the same?

What makes the software (Leopard OS) so specific to a machine?
The disks that ship with a computer have only been tested on a specific machine, may only contain Mac OS X components designed for that machine, and include additional software, such as iLife, which isn't in the retail package.
Isn't OS 10.5 the same, perform the same, written the same for an iBook, iMac G4, or iMac dual intel computer?
No. All Mac OS X 10.5 retail disks are the same, but OEM disks are usually different builds with different configurations, besides the fact that OEM disks have additional software.
(27524)

Can I install Mac OS 10.4.7 CD's meant for an imac intel chip (Jan 2007)??

Can I install Mac OS 10.4.7 CD's that came from an imac intel chip (Jan 2007) ONTO an ibook power pc G3? The ibook only has a CD drive and I believe the OS installs are CD's not DVD's as there are 2 of them. The ibook currently is running OS 10.3.9 with 23 GB on the HD at the moment. I may be able to free up some space though by dumping Microsoft Office. I know for sure I had 10.4.7 on there before but I got a used HD and there is only 10.3.9 on it. Sigh.

Nope, sorry wont work, those are Machine & Architecture specific Install Discs.
See Tom's, (Texas Mac Man), great info on where/how to find/get Tiger...
http://discussions.apple.com/thread.jspa?messageID=9755670&#9755670

Imac intel freezes while starting

Hi,
my friend's imac intel duocore freeze in the late stages of the starting process. This appeared after running latest software update package, including iphoto, ipod, itunes, quicktime, keynote ....
Next, I started from install disc, repaired permissions, repaired disc with disc utility, which reported some errors, but told me, it was able to repair.
Unfortunately, this did not change anything!!
What should I do?
- run diskwarrior (3.0.3)?
Or will I have to install a new system?
If yes, is there a way to keep the old data?
The other thing I missed: when booting from cd, I expected to be able to see the harddrives data, but it was not! How can I access it.
If nothing helps, I'll run the imac as a slave disk of my ibook to backup!!
I'll hope there is someone to assist me a little bit!
Thanks in advance!

oh, I'm sorry.
looking into one the lates threads I found a million things to check before asking questions in here - sorry!

Virus protection for an imac intel

Are imac intel's secure from viruses? If not what is the Virus protection software I should buy?

Get Intego Virus Barrier X4 !!!!!!!!!!
Forget symantec, I had trouble with Norton Antivirus, For a few months it was fine than all of the Sudden it wouldn't update, even if I took it off the computer and reinstalled it.. I called them and I was transfered to over 8 different technitions and not one of them could help me. I kept getting error messages and i even tried software update trouble shooters from their website, and nothing, just more wasted space..
NORTON TAKES FOREVER TO SCAN THE COMPUTER FOR VIRUSES
The same issues happened to my iBook as well a few day later.
I made my transition to INTEGO VIRUS BARRIER X4. THE ARE NUMBER ONE IN PROTECTING YOUR MAC FROM VIRUSES. IT IS SO USER FREINDLY AND IT INTEGRATES VERY WELL WITH THE SYSTEM.
INTEGOS VIRUS BARRIER X4 HAS A FEATURE CALLED TURBO MODE, AND IT CAN SCAN AN ENTIRE HARD DISK IN MINUTES. The software doesn't hog memory, scan seeminglessly in the back round.
IT HAS A COOL INTERFACE, AND SIMPLY TO USE, EVEN MACWORLD MAGAZINE RATES THEM NUMBER ONE.
All the other antivirus's all come from compaies that made software for windows, they only make software form mac because the Mac population is growing. These guys are Mac only software, so they do their homework making sure it's the best.
It's not cheap, but do research and you can find the program for $47 in some websites, sometimes lower or highier. I first got it from amazon since they are more reliable to buy from.
I was amazed by the performance and got one for my laptop a few weeks later.

Problem upgrading OSX 10.4.11 to leopard on my iMac (intel)

I'm trying to upgrade OSX 10.4.11 to leopard on my iMac (intel) I need to do this so I can update iTunes to sync with the iPhone 4. I'm getting the same error each time I try to install "OSX cannot be installed on this computer". Can anyone help with this?

I would max out the RAM first, 2 GB is not really enough Memory.
You don't have to go to Leopard 1st, you can go to Snow Leopard, then Lion if you want.
Snow Leopard/10.6.x Requirements...
General requirements
   * Mac computer with an Intel processor
    * 1GB of memory (I say 2GB at least)
    * 5GB of available disk space (I say 30GB at least)
    * DVD drive for installation
    * Some features require a compatible Internet service provider; fees may apply.
    * Some features require Apple’s MobileMe service; fees and terms apply.
Which apps work with Mac OS X 10.6?...
http://snowleopard.wikidot.com/
It looks like they might still have it...
http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA
If it's a core Duo & not a Core2Duo, then it'll only run in 32 bit mode.
Lion/101.7 System requirements
    •    x86-64 processor (Macs with an Intel Core 2 Duo, Intel Core i3, Intel Core i5, Intel Core i7, or Xeon processor.)
    •    At least 2GB of memory, I say 6 GB
    •    Latest version of Mac OS X Snow Leopard (10.6.8), with the Mac App Store installed
    •    At least 4GB of disk space for downloading, I say 50 GB.
Like Snow Leopard, Lion does not support PowerPC-based Macs (e.g., Power Macs, PowerBooks, iBooks, iMacs (G3-G5), eMacs).
Lion also does not support 32-bit Intel Core Duo or Core Solo based Macs. Rosetta is no longer available in Lion, which means Lion no longer supports PowerPC applications.
http://en.wikipedia.org/wiki/Mac_OS_X_Lion#System_requirements
http://www.apple.com/macosx/how-to-buy/
What applications are not compatible with Mac OS X 10.7 "Lion"?
http://ow.ly/5Iz09
http://roaringapps.com/apps:table

How do I use a Verizon PC Wireless card with my iMAC Intel Core desktop?

Help! Bought a Kyocera KPC650 Wireless PC Card for Verizon wireless internet. Works fine w/ laptop because it has a slot. How do I configure my iMAC desktop to accept this card? Is there an external USB adapter? Or do I have to get one installed internally? Which adapter works with OX 10.4?
I've seen the Quatech U132 online. Will that work? Its $192!! As is the Sewell adapter too. ($209)
Any ideas? I want to get off SBCYahoo DSL and their router because our DSL line is damaged in our complex and no one is fixing it!
Thanks in advance.
tklines
iMAC Intel Core Duo Mac OS X (10.4.2) All-in-one

What protocol is Verizon using that is not compatible with the Airport Extreme built into your iMac? I have used Apple's Airport Extreme with a lot of different wireless routers with zero problems as all conform to either 802.11b or 802.11g standard both of which are supported by the built in Airport Extreme.

I have recently upgraded my iMac Intel G5 iSight to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old sys parts

I have recently upgraded my iMac Intel G5 iSight (iMac5,1) to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old system parts. I have zapped PRAM. The blue indicator in system audio panel will appear for a second as I slide the bar for internal mic but then it disappears. Is there a fix?

The sound seems very faint but can here static on playback.

Full Firewire Port Failure (three different machines : iMac Intel, iMac G5, Black Macbook)

I'm experiencing a failure of all FireWire ports on all of my three machines. I believe this problem began with a faulty external, FireWire powered hard drive from G-Tech. Here are all my specs, followed by a rundown of the order of events that has lead to this situation, followed by the various troubleshooting I have done.
Equipment :
iMac Aluminum Intel - 24" Mid 2007 - running OsX 10.5.8 - currently 1 FW400 and 1 FW800 ports disabled
iMac G5 - 20" - running OsX 10.5.8 - currently 2 FW400 ports disabled
MacBook - 13" black Early 2008 - running OsX 10.5.8 - currently 1 FW400 port disabled
2 500GB G-Drives (by G-Tech) - AC powered
1 5TB G-RAID Drive (by G-Tech) - AC powered
1 250GB G-Drive Mini (by G-Tech) - FW powered
Initial Setup :
1 500GB G-Drive connected directly to iMac Intel via FW800
1 500GB G-Drive connected to first 500GB G-Drive via FW800 (daisy chained)
1 250GB G-Drive connected to second 500GB G-Drive via FW400 (daisy chained)
1 5TB G-RAID connected directly to iMac Intel via FW800>400 adapter
Sequence of Events :
I had transferred some files to my G-Drive Mini in order to move them to my MacBook from my iMac Intel. I copied the files to the G-Drive Mini and ejected it normally and plugged it into my MacBook via FW400. The drive would not mount, and the power indication light would not go on. After experimenting with various connections and cables I was able to get the drive to power with FW400 and USB connected at the same time, but the drive would still not mount.
I then plugged the G-Drive Mini back into the 2nd 500GB G-Drive as it was previously connected via FW400. This action caused the G-Drive to immediately reboot and eject itself from my iMac Intel.
I then attempted to plug the G-Drive Mini into my older iMac G5 via FW400. Immediately upon plugging in, the computer shut down, and would not restart.
At this point I kind of started to freak out. I was unaware of the extent of the damage, but was upset that the FW powered G-Drive Mini had shutdown my iMac G5. I contacted G-Tech Support and they offered to replace the drive and instructed me how to manually reset the computer's SMC by opening up the iMac and finding the Cuda switch. This worked and the computer was able to start and function again, but the FW400 port seemed to be disabled.
I then tried to swap out configurations and drives on my iMac Intel to see if there was any cable problems, but doing so, slowly rendered all my FireWire ports useless. It's almost as if the act of plugging in the FW-powered G-Drive Mini started a kind of shortout chain reaction. I soon learned that none of my hard drives would connect to any of my three machines, with any kind of cable combination via FW400 or 800.
I am currently able to connect my 5TB G-RAID drive to any machine via USB, as well as my G-Drive Mini. I am unable to access the other two external hard drives, as one has only FW400 and 800 ports and the other's USB connection is not functional as well on any machine.
Troubleshooting Steps Taken :
I have on all machines, reset the SMC in the following methods. iMac G5 - manually, by opening the case and pressing Cuda switch. iMac Intel - unplug, hold power button, restart method. MacBook - unplug, hold power button, restart method.
I have also on all machines, reset the PRAM by the Cmnd + Opt + P + R method at startup.
I have also unplugged all cables / removed battery, from all machines and left alone for a period of at least 12 hours, then re-plugged in each device one at a time.
I have also restored my hibernate mode (through Terminal) on my iMac Intel to mode 3 and also turned on Virtual Memory in system preferences and set hibernatemode to mode 7, the restarted and attempted to plug in devices. The reason I even began to deal with the hibernate mode was because I had around the same time my ports began malfunctioning, installed the DeepSleep widget, which allows you to control your computer's hibernate mode. I thought that tweaking with this setting may have made my computer incapable of recognizing devices that were plugged in. I have since uninstalled the widget and experimented with different hibernatemodes to no avail.
I also have Repaired Disk Permissions and Repaired Disk on all my machines, from within my Admin User as well as from the OsX Install Disk.
Sometimes in my System Profiler (like right now for example on my iMac Intel) my computer is "Unable to list FireWire devices," but sometimes, no warning message comes up and it simply displays the appropriate Bus speed.
I also conducted a system restore using a backup from my 5TB G-Raid Drive via USB, to a date before these problems started, but my ports are still not working.
Summary :
I am looking at a situation where all my FW ports on all my computers appear to be disabled, and possibly also on my four external hard drives, with one possible USB port malfunction on one external drive. The only root of this seems to be a malfunctioning FW-powered external hard drive.
Is this possible? Has this happened to anyone else before? G-Tech assures me that it is impossible for my 250GB G-Drive Mini to draw enough power from a computer to permanently disable any ports, but I have tried all of the FW port problem troubleshooting steps and am at a loss.
I do not have AppleCare and would like to avoid bringing two iMacs, a MacBook and four hard drives to the Apple store and take my chances with the geniuses.
I would appreciate any help or advice you all have. Thanks for reading and for your support!

Ok. So if that was too confusing, I've re-labeled this post with letters for my hard drives and some mapping of the connectivity configurations I have attempted.
Equipment :
iMac Aluminum Intel - 24" Mid 2007 - running OsX 10.5.8 - currently 1 FW400 and 1 FW800 ports disabled
iMac G5 - 20" - running OsX 10.5.8 - currently 2 FW400 ports disabled
MacBook - 13" black Early 2008 - running OsX 10.5.8 - currently 1 FW400 port disabled
1 500GB G-Drive (by G-Tech) w/ no USB port - AC powered : A
1 500GB G-Drive (by G-Tech) w/ USB port - AC powered : B
1 5TB G-RAID Drive (by G-Tech) - AC powered : C
1 250GB G-Drive Mini (by G-Tech) - FW powered : D
Initial Setup :
C > FW400-800 adapter > iMac Intel
D > FW400 > A > FW800 > B > FW800 > iMac Intel
Sequence of Events :
D > FW400 > MacBook
I had transferred some files to my G-Drive Mini D in order to move them to my MacBook from my iMac Intel. I copied the files to the G-Drive Mini D and ejected it normally and plugged it into my MacBook via FW400. The drive would not mount, and the power indication light would not go on. After experimenting with various connections and cables I was able to get the drive to power with FW400 and USB connected at the same time, but the drive would still not mount.
D > FW400 > A > FW800 > B > FW800 > iMac Intel
I then plugged the G-Drive Mini D back into the 2nd 500GB G-Drive A as it was previously connected via FW400. This action caused the G-Drive to immediately reboot and eject itself from my iMac Intel.
D > FW400 > iMac G5
I then attempted to plug the G-Drive Mini into my older iMac G5 via FW400. Immediately upon plugging in, the computer shut down, and would not restart.
At this point I kind of started to freak out. I was unaware of the extent of the damage, but was upset that the FW powered G-Drive Mini D had shutdown my iMac G5. I contacted G-Tech Support and they offered to replace the drive and instructed me how to manually reset the computer's SMC by opening up the iMac and finding the Cuda switch. This worked and the computer was able to start and function again, but the FW400 port seemed to be disabled.
I then tried to swap out configurations and drives on my iMac Intel to see if there was any cable problems, but doing so, slowly rendered all my FireWire ports useless. It's almost as if the act of plugging in the FW-powered G-Drive Mini D started a kind of shortout chain reaction. I soon learned that none of my hard drives would connect to any of my three machines, with any kind of cable combination via FW400 or 800.
D > USB > AnyMachine
C > USB > AnyMachine
I am currently able to connect my 5TB G-RAID C drive to any machine via USB, as well as my G-Drive Mini D. I am unable to access the other two external hard drives, as one has only FW400 and 800 ports (A) and the other's USB connection is not functional as well on any machine (B).
Troubleshooting Steps Taken :
I have on all machines, reset the SMC in the following methods. iMac G5 - manually, by opening the case and pressing Cuda switch. iMac Intel - unplug, hold power button, restart method. MacBook - unplug, hold power button, restart method.
I have also on all machines, reset the PRAM by the Cmnd + Opt + P + R method at startup.
I have also unplugged all cables / removed battery, from all machines and left alone for a period of at least 12 hours, then re-plugged in each device one at a time.
I have also restored my hibernate mode (through Terminal) on my iMac Intel to mode 3 and also turned on Virtual Memory in system preferences and set hibernatemode to mode 7, the restarted and attempted to plug in devices. The reason I even began to deal with the hibernate mode was because I had around the same time my ports began malfunctioning, installed the DeepSleep widget, which allows you to control your computer's hibernate mode. I thought that tweaking with this setting may have made my computer incapable of recognizing devices that were plugged in. I have since uninstalled the widget and experimented with different hibernatemodes to no avail.
I also have Repaired Disk Permissions and Repaired Disk on all my machines, from within my Admin User as well as from the OsX Install Disk.
Sometimes in my System Profiler (like right now for example on my iMac Intel) my computer is "Unable to list FireWire devices," but sometimes, no warning message comes up and it simply displays the appropriate Bus speed.
I also conducted a system restore using a backup from my 5TB G-Raid Drive C via USB, to a date before these problems started, but my ports are still not working.
Summary :
I am looking at a situation where all my FW ports on all my computers appear to be disabled, and possibly also on my four external hard drives (A, B, C, D), with one possible USB port malfunction on one external drive (B). The only root of this seems to be a malfunctioning FW-powered external hard drive.
Is this possible? Has this happened to anyone else before? G-Tech assures me that it is impossible for my 250GB G-Drive Mini D to draw enough power from a computer to permanently disable any ports, but I have tried all of the FW port problem troubleshooting steps and am at a loss.
I do not have AppleCare and would like to avoid bringing two iMacs, a MacBook and four hard drives to the Apple store and take my chances with the geniuses.
I would appreciate any help or advice you all have. Thanks for reading and for your support!

24" iMac Intel-Memory?

I’m going to order a 24” iMac Intel
How hard is it to put in your own memory?
I will buy from non-Apple source.
Second - should I get a 1 or a 2 GB for the extra slot?
I do know I will be getting a 1GB with the iMac 24”.
- I use iM about 4 times a year
- I use iDVD 1 or 2x’s a month (120 min long movie)
I use PHS CS twice a month.
I am getting the Video 7600/256m module.
thanks-

Your comments made go to the memory’s Co. web page-
This is what I found.
NOTE: The Intel iMac is built with the Intel Core 2 Duo Processor and has two memory sockets which can be upgraded to a maximum of 3GBs using DDR2-667 DIMMs. If both sockets are loaded with an equal amount of RAM, you can take advantage of the dual-channel memory interface for an additional performance boost
I sounds like they are saying-put the same RAM in each slot.
I will also ask the Apple rep. if I'm going to get 2-512 or one 1-GB ram module.

Problem with photoshop CS6 I have an imac intel 10.6.8...when I try to launch photoshop the icon bounces a few times then the adobe app manager tries to open then they both quit. they keep doing this over and over again but won't launch. worked fine for a

problem with photoshop CS6 I have an imac intel 10.6.8...when I try to launch photoshop the icon bounces a few times then the adobe app manager tries to open then they both quit. they keep doing this over and over again but won't launch. worked fine for a few days after install.

problem with photoshop CS6 I have an imac intel 10.6.8...when I try to launch photoshop the icon bounces a few times then the adobe app manager tries to open then they both quit. they keep doing this over and over again but won't launch. worked fine for a few days after install.

How can i update my old 2006 iMac Intel core 2 duo running 10.6.8 to OSX Lion so that I can sync using iCloud with my newer devices? Mountain Lion is not an option for my older model and Lion is no longer available at App store.

How can i update my old 2006 iMac Intel core 2 duo running 10.6.8 to OSX Lion so that I can sync using iCloud with my newer devices? Mountain Lion is not an option for my older model and Lion is no longer available at App store.

Call Apple's online store's telesales agents: 1-800-MY-APPLE (1-800-692-7753) or Customer Service and Sales Support at 1-800-676-2775. For Lion you'll get a redemptions code via e-mail and need to DL from the Mac Apple Store (requires SL 10.6.6+).

I am running on OSX 10.10.1 and have a 2009 imac intel and I am having severe latency issues. I am not familiar with macs as this is my home computer used by other family members. Any help on how to troubleshoot why such latency issues?

I am running on OSX 10.10.1 and have a 2009 imac intel and I am having severe latency issues. I am not familiar with macs as this is my home computer used by other family members. Any help on how to troubleshoot why such latency issues?

When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

I bought MACkeeper and used it to cleanup my computer. I have a Imac intel, When I didi this it deleted all my files. I tried to do a time machince. and it didn't work. so I pulled the files out of trash and my computer still isn't runing right.

I bought MacKeeper to help make my Imac intel faster. Insted it deleted all my files.
I tried to recover using time Machine, and it didn't recover back to yesterday. So I started to pull
the files and Applications out of trash. This just got me lipping along. It ran slower and would get
the spining wheel of death. I finaly gave in and thought I would reinstall Lion and everything would be
great. Well wrong, I seem to be starting fine, but all my files are gone. When I go in to time Machine
I see a device drive name (xxx). I go in that device and all my files are there. how do I pull them to the new
install of Lion? So I can be happy again. Thank you for all your time and help.

Do not install MacKeeper:
https://discussions.apple.com/docs/DOC-3026
(Please note that references to the original developers, Zeobit, should now refer to Kromtech Alliance Corp, who acquired MacKeeper and PCKeeper from ZeoBit LLC in early 2013.

System Image for G5 (PPC) and iMac (Intel Core 2 Duo)

hello,
I would like to know if there is a way to create a common system image Mac OS X 10.4.10 that I can "deploy" in out two mac labs. One with G5 (PPC-based machines) and the other with iMac (Intel-based machines).
If yes, how can I do that ? with a script ?
I tried to boot a G5 with image made on IMac and it didn't boot...
Anybody can help me ?
Thanks a lot for your cooperation,

Welcome to Apple Discussions!
As they are not comparable versions of Mac OS X, a dual boot configuration would be needed. One with a GUID (for Intel) formatting, and one with Apple Partition Map (for PowerPC). This Mac OS X hints page explains how to make a dual boot configuration:
http://www.macosxhints.com/article.php?story=2006061610374449

IMac Intel or iBook?

Similar Messages

Maybe you are looking for