IMac occasionally fails to wake from sleep mode

This is a transient problem. Happens every 2-3 days that computer fails to wake up from sleep mode. Space bar doesn't do anything and I finally have to unplug it and reboot. I have a late 2008 iMac and am running Lion. It has started doing this after I installed Lion but doesn't seem to be related.

It's tough to troubleshoot intermittent problems. You can try by restarting in Safe Mode, this will clear some caches. It's possible one or more is corrupt.

Similar Messages

  • Macbook occasionally fails to wake from sleep

    i have a new macbook (purchsed in july) which occasionally (every 1-2 weeks) fails to wake from sleep. it either hangs on the blue screen which first comes up when you switch it on, or on the black screen which normally follows shortly afterwards.
    i regularly use it "closed", i.e., with an external screen and keyboard, but the problem seems also to happen occasionally when i switch it on without these peripherals.
    any ideas?
    i've also had dvd player crash once. it was in full screen mode, and i couldn't switch to any other applications or force quit dvd player, so again i had to cut power.
    Macbook   Mac OS X (10.4.8)  

    Having similar issues...not that it happens everyday ...it's very infrequent..but yeah im in the same boat..
    As far as the computer being hot...
    Go to :
    System Preference--->Energy Savings
    From there you should have the boxed check both on Battery power and AC Cord to put the Hard drive to sleep when possible..
    Once i did this it never happened again(the closing of the lid and still running)
    as far as the other issue??Help.!!Anyone?

  • Etch A Sketch Problem - failure to wake from sleep mode

    My iMac fails to recover from sleep mode.  I have only noticed the problem when it has been left in sleep mode overnight.  When I try to wake it, the last screen viewed appears.  The mouse moves the cursor, but a trail of dark grey is made as you move the cursor.  It operates much like an Etch A Sketch.  When the power button is pressed, the log-in screen appears.  After logging in, the iMac seems to operate properly.  This just started last week.  I haven't loaded any new programs.  Has anyone else experienced this problem?  What is the cause and a possible solution?

    Here's the article,  review the bottom of the article.
    http://support.apple.com/kb/TS4135?viewlocale=en_US
    It's most often caused by automatic logoff

  • IMac with waking up randomly from sleep mode

    Hello everybody!
    Since I installed Snow Leopard (all updates done) my iMac is randomly waking up from sleep mode without any reason that I know of. Some days everything is fine, next day it wakes up when I am at work and retrieves mails (thats how I see it is awake).
    Also I set it up to shut down after 1h idle time- this does not work as well.
    Any ideas how to track the problem?

    re:
    Just happened again.
    My activity monitor:
    123 AirPort Base Station Agent 0,0 3 856 kB
    2974 Aktivitetsmonitor 8,6 6 20,2 MB
    293 AppleSpell.service 0,0 2 5,8 MB
    105 Dock 0,0 3 10,0 MB
    107 Finder 0,0 6 35,8 MB
    109 fontd 0,0 3 5,0 MB
    129 GeekTool 0,9 4 3,6 MB
    188 GrowlHelperApp 0,0 3 10,3 MB
    127 iTunesHelper 0,0 3 1,5 MB
    99 launchd 0,0 2 836 kB
    29 loginwindow 16,5 2 7,5 MB
    152 Mail 0,0 7 60,3 MB
    2977 mdworker bjarne 0,0 3 3,2 MB
    110 pboard 0,0 1 488 kB
    128 Quicksilver 0,0 3 19,6 MB
    154 Safari 0,0 9 207,1 MB
    2985 snmpInk 0,0 3 1,8 MB
    106 SystemUIServer 0,3 4 19,8 MB
    117 UserEventAgent 0,0 3 3,3 MB
    239 WebKitPluginAgent 0,0 2 696 kB

  • Compter won't wake from sleep mode

    My Pavilion 17 notebook computer, purchased in Oct. '13, won't wake from sleep mode; I must shut down and reboot each time.  I know this is not due to Windows 8, as I have another Win 8 computer that works normally.

    I've done some more experimentation and found a workaround. I had Sleep and the Screensaver both set to Never, and by activating the Screensaver the wake up issue has gone away. This doesn't change the fact that there is an issue with my ATV sleeping when it shouldn't and failing to wake up, but having the screensaver active stops it sleeping in the first place I guess.
    It's slightly annoying because I like to have music playing with the description and album art running, and this disappears when the screensaver comes on, but it is better than unplugging the thing every time I use it. Hopefully this will be fixed in the next update, because it only appeared in the last one.

  • Computer won't start & fails to wake from sleep

    First post -- I have a 2009 HP Pavilion Elite w/Windows7. Good box & OS, never a problem until now. Started about a month ago w/the box not waking up from "sleep" -- no response (power light turned from amber to blue as usual but nothing else happens). Had to turn it off, but then won't come back on! After 10-15 minutes of repeated power-on button presses, it starts back up. Removing/reinserting the power cord during trys doesn't help. Occasionally it starts right up from sleep, but usually has this problem. Windows7 is up-to-date and no viruses or malware detected. HP or Microsoft diagnostics show no issues.
    I opened the box to clean out dust -- also took off the CPU heatsink (really dusty) & cleaned it too. Fans rotate easily & aren't an issue.
    So now I have "sleep mode" turned off, but occasionly the box has to be turned off & afraid it won't come back on. I've seen some of the HP videos & will try shorting the two start-up pegs on the MBoard, but the power-switch was hardly ever used & I seriously doubt that's the problem -- it wouldn't have anything to do w/the sleep-wakeup problem. Any suggestions?

    Hello @beng1,
    I understand that your desktop computer is not able to wake from sleep mode, or power on intermittently. I would be happy to assist you in this matter!
    To enable your system to successfully wake from sleep mode, I recommend following the steps in this document on Troubleshooting sleep and hibernate issues (Windows 7).
    Additionally, I also recommend following the steps below to restore the power settings on your computer:
    Step 1. Click the Start button
    Step 2. In the search box, type "Command Prompt"
    Step 3. Right-click Command Prompt
    Step 4. Click Run as administrator
    Step 5. At the command prompt, type powercfg /restoredefaultschemes and press Enter 
    In regards to the computer not powering on, I suggest following this resource on Computer Does Not Start (Windows 7). This should help enable your computer to consistently power on.
    If the issue persists, please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www8.hp.com/us/en/contact-hp/ww-phone-assis​t.html
    I hope this helps!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • Helix 20CG won't wake from sleep mode

    Hi
    After doing all updates (windows/lenovo) and ensuring latest lenovo power managers are installed, my Helix 20CG will still not wake from sleep mode. This problem has been persistant since the second day I had the computer.
    If the Helix is in sleep mode for more than 2 hours and you press the power button, the screen will not turn on. However if the tablet is docked on the ultrabook keyboard the green light on the Fn key will briefly flicker. Also if you press the power button and then immediately hit the windows button on the bottom of the tablet it will vibrate a bit, but in both cases the screen does not turn on.
    After continuously hitting the power button for ~5-10 minutes the screen will eventually turn on.
    Has anyone else experienced this problem?
    Thanks,
    Brandon

    For the past week, I've been using the Helix and just shutting it down every time I walk away from it. This morning I put it in sleep mode walked away for an hour or so and when I went to wake it up, by pressing the power button, the green light on the Fn key flashed but it would not wake up. I held the power button down for 4 seconds to do a hard reboot. I checked the system log, and when the computer was "asleep" the following warnings were recorded:
    Level    Date and Time    Source    Event ID    Task Category
    Warning    12/13/2014 11:08:12 AM    Microsoft-Windows-DNS-Client    1014    (1014)    Name resolution for the name imap.gmail.com timed out after none of the configured DNS servers responded.
    Warning    12/13/2014 10:06:28 AM    Microsoft-Windows-DeviceSetupManager    123    None    The DSM service was delayed by 289 seconds for a driver query/download/install on device 'HID\VID_17EF&PID_6067&MI_02\8&111A4E3A&0&0000'
    Warning    12/13/2014 10:01:38 AM    Microsoft-Windows-DeviceSetupManager    123    None    The DSM service was delayed by 205 seconds for a driver query/download/install on device 'HID\VID_17EF&PID_6067&MI_01&COL03\8&12BCEF88&0&0002'
    Upon start up, the following was recorded:
    Level    Date and Time    Source    Event ID    Task Category
    Warning    12/13/2014 11:36:39 AM    Microsoft-Windows-DeviceSetupManager    201    None    A connection to the Windows Metadata and Internet Services (WMIS) could not be established.
    Warning    12/13/2014 11:36:39 AM    Microsoft-Windows-DeviceSetupManager    201    None    A connection to the Windows Metadata and Internet Services (WMIS) could not be established.
    Warning    12/13/2014 11:36:39 AM    Microsoft-Windows-DeviceSetupManager    202    None    The Network List Manager reports no connectivity to the internet.
    Warning    12/13/2014 11:36:39 AM    Microsoft-Windows-DeviceSetupManager    202    None    The Network List Manager reports no connectivity to the internet.
    Warning    12/13/2014 11:36:39 AM    Microsoft-Windows-DeviceSetupManager    200    None    A connection to the Windows Update service could not be established.
    Warning    12/13/2014 11:36:39 AM    Microsoft-Windows-DeviceSetupManager    202    None    The Network List Manager reports no connectivity to the internet.
    Warning    12/13/2014 11:36:39 AM    Microsoft-Windows-DeviceSetupManager    200    None    A connection to the Windows Update service could not be established.
    Warning    12/13/2014 11:36:39 AM    Microsoft-Windows-DeviceSetupManager    202    None    The Network List Manager reports no connectivity to the internet.
    Error    12/13/2014 11:36:34 AM    DPTF    256    GENERAL    Intel(R) Dynamic Platform and Thermal Framework : ESIF(8.0.10002.14) TYPE: ERROR FUNC: rsrc_file_extract_resource_file FILE: rsrc_file.c LINE: 368
    Error: Unable to create resource file.
    Error    12/13/2014 11:36:34 AM    DPTF    256    GENERAL    Intel(R) Dynamic Platform and Thermal Framework : ESIF(8.0.10002.14) TYPE: ERROR FUNC: rsrc_file_extract_resource_file FILE: rsrc_file.c LINE: 368
    Error: Unable to create resource file.
    Warning    12/13/2014 11:36:26 AM    Microsoft-Windows-Kernel-PnP    219    (212)    The driver \Driver\WudfRd failed to load for the device HID\INV6500\5&3adb0959&0&0000.
    Warning    12/13/2014 11:36:25 AM    Microsoft-Windows-Kernel-PnP    219    (212)    The driver \Driver\WUDFRd failed to load for the device ACPI\VFSI6101\1.
    Warning    12/13/2014 11:36:24 AM    Microsoft-Windows-Kernel-PnP    219    (212)    The driver \Driver\WUDFRd failed to load for the device ROOT\SYSTEM\0005.
    Warning    12/13/2014 11:36:24 AM    Microsoft-Windows-Kernel-PnP    219    (212)    The driver \Driver\WUDFRd failed to load for the device ROOT\SYSTEM\0004.
    Warning    12/13/2014 11:36:24 AM    Microsoft-Windows-Kernel-PnP    219    (212)    The driver \Driver\WUDFRd failed to load for the device ROOT\SYSTEM\0003.
    Warning    12/13/2014 11:36:24 AM    Microsoft-Windows-Kernel-PnP    219    (212)    The driver \Driver\WUDFRd failed to load for the device ROOT\SYSTEM\0002.
    Warning    12/13/2014 11:36:24 AM    Microsoft-Windows-Kernel-PnP    219    (212)    The driver \Driver\WUDFRd failed to load for the device ACPI\INT3400\2&daba3ff&3.
    Critical    12/13/2014 11:36:23 AM    Microsoft-Windows-Kernel-Power    41    (63)    The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
    Error    12/13/2014 11:36:21 AM    volmgr    46    None    Crash dump initialization failed!
    Error    12/13/2014 11:36:33 AM    EventLog    6008    None    The previous system shutdown at 11:23:57 AM on ‎12/‎13/‎2014 was unexpected.
    Does anyone know what these devices are or have any recommendations for getting this thing to be able to wake up from sleep mode?
    Thanks!

  • MacPro6,1 - Failing to wake from 'sleep'

    I have a MacPro6,1 which keeps failing to wake from 'sleep' is there a solution to stop this or is it a fault? considering I've only had it a few months i'm not impressed!

    Open  the Console app and see if you can find log errors at the time you try to wake the Mac.
    Also see:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        

  • IPhone 1.1.4 will not wake from sleep mode

    Hi all,
    I have an iPhone with 1.1.4 firmware. The problem that I have is that the phone will not wake from sleep mode by pressing the "home" button. I have to press both the "home" and "sleep/power" buttons and hold them for 6 seconds for the phone to restart. I did restore the phone twice - did not solve the problem. Then, one day, I left it charging for about 3 days and when I came back it started working fine. Not for long though( After about a week of normal usage the wake up problem came back. I don't know what to do. I don't think it's the software problem, since I did complete restoration 2 times.
    If the phone is connected to a charger or computer - it wakes up fine.
    Thanks, Gene K
    Message was edited by: rimini

    rimini,
    When you've restored the iPhone, have you tried setting it up as a new phone? This would truly eliminate software as a possibility.
    If setting it up as a new phone doesn't correct the issue, it's probably time for service: apple.com/support/iphone/service/faq/
    Hope this helps,
    Raleigh

  • Hp Envy + Win 10 -does not wake from sleep mode

    Win 10 on HP Envy  Device will not wake from sleep mode must force power off and reboot (hold power button in) Please help! : ) OS Name Microsoft Windows 10 Home
    Version 10.0.10240 Build 10240
    Other OS Description Not Available
    OS Manufacturer Microsoft Corporation
    System Name
    System Manufacturer Hewlett-Packard
    System Model HP ENVY 15 X360 PC
    System Type x64-based PC
    System SKU G6T84UAR#ABA
    Processor Intel(R) Core(TM) i5-4210U CPU @ 1.70GHz, 2401 Mhz, 2 Core(s), 4 Logical Processor(s)
    BIOS Version/Date Insyde F.11, 7/17/2014
    SMBIOS Version 2.8
    Embedded Controller Version 89.34
    BIOS Mode UEFI
    BaseBoard Manufacturer Hewlett-Packard
    BaseBoard Model Not Available
    BaseBoard Name Base Board
    Platform Role Mobile
    Secure Boot State On
    PCR7 Configuration Binding Not Possible
    Windows Directory C:\WINDOWS
    System Directory C:\WINDOWS\system32
    Boot Device \Device\HarddiskVolume2
    Locale United States
    Hardware Abstraction Layer Version = "10.0.10240.16392"
    Time Zone Pacific Daylight Time
    Installed Physical Memory (RAM) 8.00 GB
    Total Physical Memory 7.93 GB
    Available Physical Memory 4.89 GB
    Total Virtual Memory 9.81 GB
    Available Virtual Memory 6.33 GB
    Page File Space 1.88 GB
    Page File C:\pagefile.sys
    Hyper-V - VM Monitor Mode Extensions Yes
    Hyper-V - Second Level Address Translation Extensions Yes
    Hyper-V - Virtualization Enabled in Firmware No
    Hyper-V - Data Execution Protection Yes  1. The computer's model number. If you require assistance locating this information, please reference this website: Guide to finding your product number ***listed above 2. The computer's operating system. If you require assistance locating this information, please reference this website to determine your Windows operating system. *** Win 10 3. Have you installed any new hardware on this computer, before the issue appeared? no 4. Have you installed any new software or drivers on this computer, before the issue appeared? Win 10 upgrade from 8.1 Reply 

    I found a solution. It's still has some bugs to fix but for now, waking it up from sleep works. here's a link to a step by step proceedurehttp://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/windows-10-sleep-mode/td-p/5170873  it worked for me. hope it does for you.

  • IMac freezes up after awaking from sleep mode. I then Force it to shut down

    My iMac freezes up after awaking from sleep mode. I then Force it to shut down and it freezes up during startup. Any clues out there? This is a first generation iMac G5 17".

    Welcome to Discussions - check and see if you're included in Apple's Repair extension programs, your power supply or capacitors might be bad.

  • T410 fails to wake from sleep with 2nd Hard drive installed?

    Ever since I've installed a second hard drive in my T410, a Hitachi 250GB drive, my machine fails to wake from sleep (sometimes)... Then I have to do a hard reset.
    I had the same problem without the 2nd drive when I tried to use the HD Password in the BIOS and found out that it was something to do with the Crucial M4 drive I'm using. But this same problem is now happening ever since using the 2nd drive slot.
    Any ideas? I really like the extra storage space and don't want to remove it based on this problem.
    T410(2537) -- i7 620M - Intel HD GPU (1440 x 900) - 8GB RAM - 128GB Crucial M4 SSD - 250GB Hitachi HDD - Windows 7 & 8 Pro
    Solved!
    Go to Solution.

    Well it seems the problem was caused by the firmware version for the SSD I've installed.
    The problem was resolved by updating the Crucial M4 SSD with the latest firmware.....
    ......and It solved the HD1 password issue too.
    T410(2537) -- i7 620M - Intel HD GPU (1440 x 900) - 8GB RAM - 128GB Crucial M4 SSD - 250GB Hitachi HDD - Windows 7 & 8 Pro

  • PowerBook won't wake from sleep mode

    My PowerBook G4 won't wake from sleep mode. I open the lid and nothing happens. I hold down the power button and nothing happens. I resetted the PMU and it will wake up and I am able to login and then it goes back to sleep mode. What should I do please help? And if my computer is dead, is there any way to retrieve my information saved on the hard drive?

    this would happen to me when my battery was dead. you test the battery life? (little button on bottom near battery)
    I'd make sure it was plugged in and let it charge for 10 minutes or so. then try restarting it if it doesnt wake up by itself.

  • Battery wakes from sleep mode

    I have a user who's laptop wakes from sleep mode while the laptop is closed. We changed the battery, checked all settings for sleep mode (wake on LAN, etc) and it still wakes up while the lid is closed. Also, the laptop gets really hot on the left-hand side by the fans, below the screen.
    Any other suggestions of what it could be? I'm not sure where else to go.
    Thanks!
    Solved!
    Go to Solution.

    Hi again, itjedi
    I did some research and found that there are some driver updates available for the machine that may be of some assistance. I would definitely make sure the BIOS gets updated, but the others may help as well. All of them can be found here, and the results can be filtered by OS and device type if you'd like.
    Best of luck. Let me know how it goes
    Adam
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

  • Powerbook Ti will occasionally not wake from sleep mode

    When I put my powerbook in sleep mode, either it will wake, or it will wake but the screen will be blank. The HD will have turned on, the pulsating light will have turned off, and you can hear the fan running. I'll then have to force shutdown and restart.
    So far I have tried:
    1. sleeping via the powerbutton and choosing sleep to see if that changes anything
    2. to plug in a peripheral via USB
    3. to wait it out to see if the screen appears
    4. to reset the PMU underneath the keyboard
    5. to check to see if my ram was bad
    6. to repair disk permissions
    7. to repair file systems via fsck -f in terminal
    Nothing has worked. Please help anyone. Thanks

    ckoeshall: The note you quoted from that article concerns desktop Macs, most or all of which use non-rechargeable PRAM batteries. The internal backup battery in your Tibook is rechargeable, and is responsible for maintaining your time and date settings when both the main battery and the AC adapter are disconnected. It will only last a few minutes under those circumstances, though (it lasts long enough to let you change the main battery or get connected to AC power when your main battery runs down). You haven't mentioned that your time and date settings don't hold (but of course they're lost when you reset PRAM or the PMU), and I'm not aware that a depleted backup battery can cause the wake-from-sleep problem you're experiencing.
    To recharge your backup battery just to eliminate it as a possible factor in your problem, remove the main battery and leave the PB connected to AC power for 4-5 hours. It takes much longer to charge the backup battery if the main battery is in place and in need of charging too, because the main battery evidently gets priority.
    The fact that you have a third-party main battery probably has nothing at all to do with your problem. By now, I suspect that a large majority of Tibook users are operating with third-party batteries, since Apple no longer sells them.

Maybe you are looking for

  • Problem in a BEX Query

    Dear BW-Experts, I have following problem: the yearly figure of our forecast is stored in the BW Infocube in calendar month 12 (this was set up before I joined the company, no idea why it was done in this way). Now I should create a query where the f

  • BPEL skip checkin documents in UCM

    Guru's : We have an serious issue, We are trying to load documents into UCM from BPEL that Invokes 2-way operation CheckIn.wsdl & service : CheckInUniversal as you can see below. There will be request in BPEL for creating multiple documents for the s

  • Z61t - Sound not working

    Hi, I am new to this forum. Had purchased the z61t about 1.5 yrs back. Was working fine. I am very satisfied. However, recently, when the laptop was on standby, the battery drained completely. After I recharged the battery and brought up the laptop,

  • Work processes died and dispatcher not starting

    Any idea on the following error causing dispatcher not to start? The following excerpt is taken from the trace log. Any clue would be very helpful. Thanks. Mon Mar 03 11:44:02 2008 CCMS: start to initalize 3.X shared alert area (first segment). ERROR

  • Sharing my movies

    I am looking for a way that will allow me to rip all the content of a DVD I make in iDVD and store it on a hard drive. Not just the video footage, the DVD menus/sub menus as well and be able to play them by clicking on the file. This way I can drop t