IMac (on Ethernet) Can No Longer Stream to Airport Express (on WiFi)

After years of reliable service, all of a sudden I cannot stream music from iTunes on my iMac, via my Airport Express, to my stereo system.
First, a bit about my configuration:
   * iMac connected via Ethernet to a wireless router (D-Link DIR-655).
   * iMac Airport (WiFi) is turned off.
   * D-Link sets up a wireless network, and Airport Express joins the network.
   * Airport Express does not set up its own network, it's simply a client of the existing D-Link wireless network.
   * iTunes "sees" the Airport Express, and can stream audio via AirPlay.
   * iPad also joins the wireless network, and also can stream to the Airport Express via AirPlay.
   * iMac running 10.6.8, with all software updates applied.
   * Airport Express running latest firmware (7.6.1).
Well, that was a few days ago, when "it just worked". But for some unknown reason iTunes could no longer "see" the Airport Express.
So I took my Airport Express to the Apple Store and they did a Factory Reset, but it did not solve the problem. I figured my rather old Airport Express was failing, so today I bought a new one. The symptoms have changed a bit, but even after spending an hour on the phone with AppleCare, it doesn't work properly.
Now, the only way the iMac can stream to the Airport Express is if the iMac also joins the wireless network. In fact, now with Airport turned OFF on the iMac, the Airport Utility cannot see the Airport Express. But here's another weird thing: when I use the IP address of the Airport Express, the Airport Utility CAN connect with and manage the Airport Express, even with Airport turned OFF on the iMac!
I should also mention, the iPad has no issues whatsoever connecting to the D-Link's wireless network and streaming music to the Airport Express.
This all seems like something might have changed on the D-Link wireless router. But for the life of me, I cannot figure out what setting(s) on the router might allow the iMac - over Ethernet - to stream audio to the Airport Express.
Another thing. When I have Airport turned on on the iMac, it can "see" and stream to the Airport Express, but the music has very frequent drop-outs. Could this be related to the fact that the iMac has two IP addresses (one on Ethernet, one on WiFi)?
My goal is to get things "back to normal", where I can turn off Airport on the iMac, and all LAN and WAN traffic from the iMac goes over Ethernet. I have a few questions (for now :-)
   * Since my iMac has two connections to my LAN using two IP addresses (Ethernet & WiFi), is that likely to cause any issues?
   * When two computers join the same wireless LAN, can they effectively talk directly to one another, or does the wireless router need to be involved every time one computer sends a TCP or UDP packet to the other?
   * Do routers (or the DIR-655 in particular) tend to have any firewalls or policies that control connections on the LAN between Ethernet and WiFi clients?
   * Since AirPlay uses TCP port 3689 and UDP port 5353, would the DIR-655 need any special configuration to "open these ports" so an Ethernet client can connect with a WiFi client?
So, any help would be most appreciated!
Thanks!
Jim

I am having a very similar issue. I use my Airport Express (AX) to stream music from the computers on my network to my stereo via Airplay. I have AX set up to wirelessly join my existing wireless network, which uses a D-Link DIR-655 router hooked to a Time Warner cable modem. I can succesfully connect all of my wireless devices via Airplay, through iTunes to my AX, including two laptops and an iPhone. However, my primary desktop PC, which does not have a wireless card is linked directly via ethernet cable to my D-Link router, and it is not able to see my AX. Similar to your case, I can see the Airport Express from my PC through my Airport Utility by directly typing in the IP address. Note that the AX set-up option to allow Ethernet clients is checked. I also noticed that my laptops will stop detecting AX if I directly connect them to my D-Link router via Ethernet and turn off their wireless cards. They will resume detecting AX when I turn their wireless connections back on. I have tried every conceivable setting of my D-Link router to no avail.

Similar Messages

I can no longer access my Airport Express Base Station. When I plug it in, it keeps flashing orange. I cannot see it in the Airport Utility.

I can no longer access my Airport Express Base Station. When I plug it in, it keeps flashing orange. I cannot see it in the Airport Utility.
How do I fix this

If you're comfortable resetting all settings, unplug it, hold down the reset button and keep holding it in as you plug it back in - keep holding it for another 10-20s until the amber light flashes
Then, open airport utility, now you should be able to see the device either on-screen or in the upper left under 'other wi-fi devices'

Airport Utility can no longer see my Airport Express Base Station.

Hi all the problem I have is as follows;
I've set up my Airport Express Base Station some time ago to print wirelessly from my HP Photosmart C4280 and it was working fine.
However recently when I've gone to print a document, even though the printer is working fine and the Airport Express Base Station is showing a green light nothing happens. I've gone into the Airport Utility and its say's it can't see the Airport Express Base Station (even though it still has a green light showing). If I unplug the Airport Express and plug it in again, the Airport Utility can suddenly see it again.
I've successfully gone through the reset process but after a few minutes the Airport Utility can no longer see the Airport Express Base Station which means I can't print a document wirelessly. I've repeated the reset process several times with the same outcome.
Everything was working fine up until recently, has the Airport Express Base Station developed a fault? or is there something I'm not doing.
Any advice would be greatly appreciated.

If you're comfortable resetting all settings, unplug it, hold down the reset button and keep holding it in as you plug it back in - keep holding it for another 10-20s until the amber light flashes
Then, open airport utility, now you should be able to see the device either on-screen or in the upper left under 'other wi-fi devices'

Can no longer print from Airport Express

I have an Airport Express base station model A1084 that had been working fine. I have a printer attached to it that did work, but now whenever it is used it shows offline. The Airport is connected to a DLink DGL-4100 router which is connected to a cable modem. Wireless access to the internet works fine. I also have an iMac connected to this network. The Airport utility on the iMac can only see the Airport when I turn on the wifi on the iMac. If I turn off the wireless on the iMac, it cannot find the Airport. I have discovered that the iMac can print to the printer when the wifi is on but not when it is turned off. Performance is very slow. The other devices can see the printer but not print to it. I suspect that an update to something is the source of the problems. All of the software and firmware is up to date.
Any help is appreciated.
John

The Airport is connected to a DLink DGL-4100 router which is connected to a cable modem.
With the AirPort Express Base Station (AX) connected directly to the upstream D-Link router by Ethernet, I assume that you have the AX reconfigured as a bridge, i.e., Connection Sharing = Off (Bridge Mode) ... correct?

Can no longer connect to Airport Express with upgrade to iTunes 10.1

Since I upgraded to iTunes 10.1 I can no longer connect to my Airport Express (unknown error-15000). Another computer on my betwork running an older version of iTunes still works on the Airport Express.
Any ideas? I have tried to uninstall and reinstall airport express with no success.

Rather than disabling the firewall, try making sure you've got exceptions in it for BonJour. Although the following document is about a different error message, the instructions in there are worth trying. (At step 7, make sure there's an exception for BonJour as well.)
[iTunes for Windows: Bonjour alert due to firewall, security, or proxy software|http://support.apple.com/kb/TS3448]

Anyone have any ideas why i can no longer see my Airport express speaker in Airtunes?

for the last couple of days i no longer can see my itunes speaker from an old Airport Express (V 6.3) 802.11g. Airport Utility 5.6 still lets me set it up, so I can see it there. but for some reaason i can no longer see that speaker selection in itunes or any of my devices. Any ideas? Thanks.

Hi Murray,
What version of Acrobat or Acrobat Reader are you using? Are you trying to open the PDF files from the Finder, or in Acrobat/Reader?
We look forward to hearing back from you.
Best,
Sara

Recently upgraded to 10.8.5 however the Himedia player connected to my iMac via sharing can no longer connect to the iMac.

please help. recently upgraded to 10.8.5 however the Himedia player connected to my iMac via sharing can no longer connect to the iMac. the media player recognizes the imac and the shared files, however when you try to connect from himedia to imac it give a login unsuccesful.
Have contacted Himedia and they say its something to do with Mountain lion

This helps but
scroll bar very flat, slim and hard to see not able to customize
at least I know I have to suck it up and not loose anymore time
Thanks

When I upgraded my iMac to Lion I can no longer connect the iPad 2 to WiFi. It gives me a message unable to search for WiFi. Before the upgrade to Lion it worked fine. What gives?

When I upgraded my iMac to Lion I can no longer connect the iPad 2 to WiFi. It gives me a message unable to search for WiFi. Before the upgrade to Lion it worked fine. What gives?

Could there be a setting I need to adjust in the iPad2? When I try to turn on WiFi and enter the name of the WiFi that I have established, including the security type and the password, I get the message "Could not scan for wireless networks." Is there a setting in iCloud or other location that needs to be changed?

HT4363 I can no longer stream my iTunes into my Apple TV. Help!

I can no longer stream my iTunes into my Apple TV. It has worked before, but Apple TV is not recognizing my iTunes library any longer. It keeps telling me to make sure it's turned on on my computer. It is. And yes, the accounts match, etc. But it no longer recognizes my iTunes library. I can play all the stuff purchased through iTunes fine. I just can stream my main library any longer. Very very frustrated.

Welcome to the Apple Community.
Have you tried restarting the router, the Apple TV and iTunes.

Updated to ios5 and can no longer stream videos with apps. Solutions?

I updated my iPhone 4 to ios5 and can no longer stream avi files that I get as mail attachments. I have two video player apps (GoodPlayer and oPlayer) and I can't choose to open the attachments with either of them when I hold down the file name in mail. Before the update, avi files played perfectly well with oplayer and now, nothing... I'm a pretty basic user and just want something that works well. Anyone have any ideas?
Thanks!

Are you running the current versions of these apps - you have checked for app updates?
I use OPlayer which works fine with iOS 5. As an FYI, viewing an AVI attachment received via emal is not streaming.
Any problem with a 3rd party app you need to take up with the app developer.

I downloaded Yosemite on new iMac and now can no longer open spreadsheet files created using Excel for the iMac. I used to be able to do so on this new computer. What can I do?

I downloaded Yosemite on my new iMac and now can no longer open spread sheet files I created on my old iMac using Excel for the iMac. I used to be able to open these files on my new computer before Yosemite.

I downloaded Yosemite on my new iMac and now can no longer open spread sheet files I created on my old iMac using Excel for the iMac. I used to be able to open these files on my new computer before Yosemite.

Hi, I`d like to connect my Ipad wirelessly to a stereo to listen to my music from the iTunes library on streaming, but also to movies online, games, Goear-) and so on. I guess I can do that using an Airport express connected to the stereo and via airplay

Hi, I`d like to connect my Ipad wirelessly to a stereo to listen to my music from the iTunes library on streaming, but also to movies online, games, Goear…) and so on. I guess I can do that using an Airport express connected to the stereo and via airplay to my Ipad. My question is, can I listen to all the audio that come out from the ipad (movies online, games, Goear…) or only to the music from iTunes library? I`d appreciate any help. Alex.

My question is, can I listen to all the audio that come out from the ipad (movies online, games, Goear…) or only to the music from iTunes library?
On the iPad you can stream videos, photos, or music from the Video, Photos, Music, and YouTube apps to an Apple TV OR just stream music to an AirPort Express Base Station.

Can i use my european airport express in israel as a client for streaming music?

can i use my european airport express in israel as a client for streaming music?
thank you!

Yes. There may be regional differences in the number of available wireless channels but it should work. Its power supply is universal.

Can I add a second Airport Express?

I have an Extreme Base Station connected to my Time Warner Cable Modem. It comes into my house in my office, which is over my garage, a separate structure in my backyard. The iMacs there are connected via Ethernet to the Apple Base Station. In my house, maybe 30 feet away, where I use two Macbook Pro's, iPhone 6, iPad 3 etc, all via Wireless, I have an Airport Express as an extender to amplify the signal because my house with it's lathe walls is a great shield. This works OK up to a point. The further away I get from the Airport Express, the fainter the signal gets.
Naturally, the farthest room away is my family room with a Smart TV, Apple TV, A/V receiver, DirecTV Cinema box, Playstation3 etc. I just added an Amazon FireStick TV via HDMI. It found my wireless network perfectly and joined. Problem is, it's buffering like crazy when I try to watch a movie and reporting "bandwidth too low". So I have a problem. I need to boost the signal one more time.
Can I add a second Airport Express to my existing network as an extender, which now consists of a Extreme BaseStation and one Airport Express.
If not, does anyone have any ideas?
Thank you.

Can I add a second Airport Express to my existing network as an extender, which now consists of a Extreme BaseStation and one Airport Express.
Sorry, but no. Even if it was possible, the speed loss would be amazing, and would really hurt, not help the current network performance.
Probably not the answer that you want to hear, but the only way to get the same signal strength and speed from your office to a location in the home is to run an Ethernet cable between the two locations.
There is no loss of signal or speed through an Ethernet cable up to 330 feet, or 100 meters. Good old Ethernet cable. Nothing comes close to a wire in terms of performance.
I faced a similar problem, and while the initial outlay to the electrician was significant, it has been the best investment that I ever made in terms of improving network performance....far better than the "improvement" with any new product, or any new router or any new technology that might have been available.
If you absolutely cannot run the Ethernet cable, then a pair of Ethernet Over Powerline (EOP) adapters might be able to send the Ethernet signal over the existing power lines in your office and home.
The theory with EOP products is that you already have the wiring in place.....you just need the adapters. Unfortunately, things do not always work as well in practice as the theory might suggest.......having the signal hop several different circuits would be one major challenge.....whether the office and home are on the same master circuit would be a question as well.
Given your situation, I would not even consider trying EOP adapters unless the store agreed to take them back within 7-14 days if they don't work well for you.

I am currently using Itunes 4.1. It no longer shows my airport express setups as options. What's up with that?

I am currently using Itunes 4.1 on my IMac. It no longer shows my airport express setups as options. What is going on?

Hi Geo,
fnfErr
= -43, /*File not found*/
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
Any change on reboot?

IMac (on Ethernet) Can No Longer Stream to Airport Express (on WiFi)

Similar Messages

Maybe you are looking for