IMAC will no longer boot into Windows 7 with Boot camp
I can see the partition on the Mac destop and can access it.
The windows options is available when I hold down the option key when booting but the computer appears to just hang.
I have been unable to get the Imac to boot off the Windows 7 dvd or a repair disk. I just get a white screen.
I could sure use some help trying to get the computer to boot back in Windows.
Thanks in advance.
Oddly enough I turned off the computer for a bit and turned it back on and it boot right into windows.......
I did have my Samsung phone plugged into the usb hub.....I wonder if that was causing some issues...weird.
Similar Messages
-
Trying to boot into Windows with no Windows Partition
So I tried Windows XP on boot camp and ofcourse it says it's not installed when it clearly is >_>
So I restored and when I boot up it tries to boot into windows, when it loads it says Disk Error insert boot disk. When I hold alt it only shows Macinstosh HD.
I've just re-partitioned and restored to Mac full partition again so I need to reboot and see if that works...
Any help?Ubuntuz wrote:
So I tried Windows XP on boot camp and ofcourse it says it's not installed when it clearly is >_>
So I restored and when I boot up it tries to boot into windows, when it loads it says Disk Error insert boot disk. When I hold alt it only shows Macinstosh HD.
I've just re-partitioned and restored to Mac full partition again so I need to reboot and see if that works...
Any help?
The last line in your post says "I've just re-partitioned and restored to Mac full partition again so I need to reboot and see if that works"
Rebooting should take you to OSX provided you removed the BC partition correctly (using Boot Camp Assistant)
I am not sure what you mean by the rest of the post "So I restored" restored what?
It sounds as though XP was either not installed or not installed correctly, what happens now when you reboot? -
Booting into Windows with Unsupported Video Card
I'm looking to buy a Windows-only video card. I'm currently using the Apple branded 8800GT and want to use an nVidia GTX 290. If I change my target drive to my Windows partition, will the system boot normally into Windows if I only have the GTX 290 installed or will I still be required to have the 8800GT in place in order for the EFI to launch normally?
Set your sits on PC 285 maybe? Your 295 will require more power than available and has been a stumbling block for all that tried.
http://forums.macrumors.com/forumdisplay.php?f=1
No mixing with ATI cards allowed. -
X79A GD45 Slow start and slow boot into windows with SSD
Im having some major issues with my X79A GD45 board, When I start the system it takes about 30 seconds sometimes more for something to appear on the screen and from cold boot it starts stops and then starts again before loading.
Once its loaded it is taking forever to get into windows Im running 2 6gb/s SSD's in raid and the windows logo is able to appear and flash 3 or 4 times before I even get into windows.
Ive tried it with just a single drive and re installations of windows but get exacly the same thing its driving me mad as Ive spent so much money on this machine. Details of my system are below:
MSI X79A GD45 v1.0 Bios 1.6
Intel I7 3820
Corsair Vengeance 16gb 1600 Cl9
2 x GTX 680 in SLi
Creative Soundblaster 3D Recon Fatality Sound Card
2 x Sandisk Extreme 240gb in Raid 0
Silvertone Strider 850w PSU
LG Bluray WriterUpdated the SSD Firmwares and it made no difference. Ive already tried single drives and the same. The drives are installed into SATA 1 and SATA2 ports the 6gb/s ones. The hang time is atleast 20 seconds at the splash screen alone before loading into windows. I checked the event log for booting and this is what it showed:
Log Name: Microsoft-Windows-Diagnostics-Performance/Operational
Source: Microsoft-Windows-Diagnostics-Performance
Date: 18/10/2012 22:07:07
Event ID: 100
Task Category: Boot Performance Monitoring
Level: Warning
Keywords: Event Log
User: LOCAL SERVICE
Computer: Steve-PC
Description:
Windows has started up:
Boot Duration : 22130ms
IsDegradation : false
Incident Time (UTC) : 2012-10-18T21:05:20.624800300Z
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Diagnostics-Performance" Guid="{CFC18EC0-96B1-4EBA-961B-622CAEE05B0A}" />
<EventID>100</EventID>
<Version>2</Version>
<Level>3</Level>
<Task>4002</Task>
<Opcode>34</Opcode>
<Keywords>0x8000000000010000</Keywords>
<TimeCreated SystemTime="2012-10-18T21:07:07.018586500Z" />
<EventRecordID>11</EventRecordID>
<Correlation ActivityID="{02EB6910-F800-0002-44BE-684874ADCD01}" />
<Execution ProcessID="1268" ThreadID="1336" />
<Channel>Microsoft-Windows-Diagnostics-Performance/Operational</Channel>
<Computer>Steve-PC</Computer>
<Security UserID="S-1-5-19" />
</System>
<EventData>
<Data Name="BootTsVersion">2</Data>
<Data Name="BootStartTime">2012-10-18T21:05:20.624800300Z</Data>
<Data Name="BootEndTime">2012-10-18T21:07:04.226181600Z</Data>
<Data Name="SystemBootInstance">8</Data>
<Data Name="UserBootInstance">4</Data>
<Data Name="BootTime">22130</Data>
<Data Name="MainPathBootTime">12230</Data>
<Data Name="BootKernelInitTime">13</Data>
<Data Name="BootDriverInitTime">696</Data>
<Data Name="BootDevicesInitTime">4960</Data>
<Data Name="BootPrefetchInitTime">1575</Data>
<Data Name="BootPrefetchBytes">228585472</Data>
<Data Name="BootAutoChkTime">0</Data>
<Data Name="BootSmssInitTime">4198</Data>
<Data Name="BootCriticalServicesInitTime">190</Data>
<Data Name="BootUserProfileProcessingTime">36</Data>
<Data Name="BootMachineProfileProcessingTime">0</Data>
<Data Name="BootExplorerInitTime">205</Data>
<Data Name="BootNumStartupApps">1</Data>
<Data Name="BootPostBootTime">9900</Data>
<Data Name="BootIsRebootAfterInstall">false</Data>
<Data Name="BootRootCauseStepImprovementBits">2308</Data>
<Data Name="BootRootCauseGradualImprovementBits">0</Data>
<Data Name="BootRootCauseStepDegradationBits">0</Data>
<Data Name="BootRootCauseGradualDegradationBits">0</Data>
<Data Name="BootIsDegradation">false</Data>
<Data Name="BootIsStepDegradation">false</Data>
<Data Name="BootIsGradualDegradation">false</Data>
<Data Name="BootImprovementDelta">0</Data>
<Data Name="BootDegradationDelta">0</Data>
<Data Name="BootIsRootCauseIdentified">true</Data>
<Data Name="OSLoaderDuration">511</Data>
<Data Name="BootPNPInitStartTimeMS">13</Data>
<Data Name="BootPNPInitDuration">5049</Data>
<Data Name="OtherKernelInitDuration">1426</Data>
<Data Name="SystemPNPInitStartTimeMS">6472</Data>
<Data Name="SystemPNPInitDuration">607</Data>
<Data Name="SessionInitStartTimeMS">7083</Data>
<Data Name="Session0InitDuration">3095</Data>
<Data Name="Session1InitDuration">259</Data>
<Data Name="SessionInitOtherDuration">843</Data>
<Data Name="WinLogonStartTimeMS">11282</Data>
<Data Name="OtherLogonInitActivityDuration">706</Data>
<Data Name="UserLogonWaitDuration">133</Data>
</EventData>
</Event> -
Boot Back Into Windows With Boot Camp
Hello,
I am running Boot Camp on a Mac Book Pro. It runs extremely well except for one issue. When the mac goes to sleep for a short time minutes to a few hours, and I click a button, the Windows screen is there ready to use. But, if it sleeps over night, I can not click a button to wake it, I have to click the power button and wait for the boot cycle again holding down the option button so I can choose the Windows drive again. Am I missing something is settings so no matter how long the system sleeps it will wake back into the last running operating system?
Thanks JrCheck on the hibernate settings by going to the advanced power options as posted by Loner T above. Look under the sleep heading, see pic.
While sleep puts your work and settings in memory and draws a small amount of power, hibernation puts your open documents and programs on your hard disk, and then turns off your computer.
It can be disabled. http://support.microsoft.com/kb/920730 -
IMac with bootcamp and parallel boots into windows 7 but won't boot intoxc lion.
IMac with bootcamp and parallel boots into windows 7 but won't boot into Mac OS lion?
Hi,
Thanks for your suggestion. Actually that was not the problem, because I had the Mcintosh drive set as my boot drive. The answer was that my Lion Os got somehow corrupted and I had to reinstalll Lion. This was all after I discussed the situation with the Apple Support people. -
Can I install Windows on my iMac 27, 3TB Fusion Drive, late-2012 with Boot Camp 5?
Hello. When I first opened the Boot Camp Assistant app, it said it could not work with the 3TB fusion drive. With the updated version of Boot Camp, the option to install Windows appeared. I tried to install Windows 8, but the loading bar stopped moving. I waited for hours, but it still did not move. I decided to quit the app, and re-open it, in order to try again. It crashed, and would not open. So I restarted my system and when I did that I noticed that I had about 1GB or so left of storage. This shocked me, because the disk was just suddenly filled for some reason. In hopes of fixing this I used an app called 'CleanMyMac' to try and recover the disk space. And as I thought the disk space returned to normal. However when I went to Disk Utility and clicked 'repair disk' it said this...
There is only 1 partition, so the Boot Camp process did fail.
I don't know whats wrong with my system though? I would like to install Windows, but I'm worried that I might recieve errors again. I have not got Apple Care, but I'm playing on buying it soon, due to it being almost a year since I bought the system.
Maybe I did something wrong when trying to install Windows with Boot Camp? I don't know, but if possible can someone please tell me if I can install Windows and if something is wrong with my system.
Here is some additional screen shots of the type of system I have.
Thank you for your help with this issue!Which copy or version of Windows? and how where was it purchased?
my window installed itself perfectly on another computer.
One copy and you want to activate on two computers?
With 16GB, it will try to create 16GB hibernation file, 24GB page file, and need 20-30GB for the OS, plus room for temp, cache, applications, 9GB just temp to install SP1 update(s).
did you create 80GB or larger partition?
also, some macs with ssd + hard drive have issues, and of course you need Windows 7 64-bit home premium (Pro to use more).
OWC has up to 32GB, not cheap.
http://eshop.macsales.com/shop/memory/iMac/2010/DDR3_21.5_27
Crucial is usally very helpful, try email cs. -
I want to set up OSX Server on my iMAC running Mavericks and also install Windows 8 on Boot Camp. If I do this and boot into Windows, will that prevent server from running while I'm in Windows?
No. Bootcamp, as you've described, requires rebooting into your chosen operating system. If you want to run both OS X and Windows at the same time from your hardware, look at virtualization tools like Parrallels or VMWare.
R-
Apple Consultants Network
Apple Professional Services
Author "Mavericks Server – Foundation Services" :: Exclusively available in Apple's iBooks Store -
Can't get past gray screen for OS X but will boot into Windows partition.
Hi- I am really desperate for help here.
Restarted my computer this evening when Front Row wasn't able to find the files on my external HD. When it booted it went directly in to my Windows Boot Camp partition. So I restarted, held down 'option', choose my OS X disk and just got the spinning sun icon on the gray screen for several minutes. It then booted into Windows again. If I hold down 'option' again I can cut it off before it gets to Windows.
I've tried booting into a cloned HD via FireWire and same results.
I've tried booting with the install disk (c key held down) and it won't recognize it.
I've tried Safe Mode (shift key) - same.
I've booted into Single User and done fsck and and it says everything is ok.
- BUT I did notice it says further up- "BSD: rootdisk0s2, major 14, minor 2". Are these errors? If so why didn't fsck find and fix them.
I've tried resetting PRAM and SMC.
The only thing I have done out of the ordinary was an hour before I was trying to get some of my files on my wife's laptop and went into permissions on my HD and changed "Everyone" Priviledges to Read (or maybe it was Read and Write) then chose "apply to enclosed items". This change took about 20 minutes.
The computer is, of course, just over a year old and has worked perfectly up until now.
Someone-Please!!!Tried that and it just doesn't read the disk. I've booted it with the disc already in and held Shift and also tried it with "C". The same for putting the disc in just as it boots up.
I went into Single User mode again and compared the text against what shows up on the laptop. Their are a few differences. At the very beginning of the iMac text there is:
npvhash=4095
hi mem tramps at 0xffe00000
PAE Enabled
64 bit mode enabled
-then-
Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpicomponents; use only one style.
Extension "com.apple.driver.AppleIntelCPUPowerManagement" has immediate dependencies on both com.apple.kernel and com.apple.kpicomponents; use only one style.
-then- after "MAC Framework successfully initialized" comes this three times...
Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpicomponents; use only one style.
These are really the only major differences that I can see in the Single Mode screen.
I also have tried booting from the Firewire drive clone on the laptop but it is not an available option for booting. The disk partitions mount but have a lock in the corner and say they cannot be opened because I have insufficient access privileges. -
FreeBSD didn't install, i can no longer boot into Windows
I unsuccessfully installed FreeBSD and I can no longer boot into an OS from the HD. I attempted to install BSD onto the "G" drive below however the the install gave me some kind of storage error and I can no longer boot into Windows. While going through the BSD installation process I opted to NOT install a boot manager (I incorrectly assumed that this would leave my existing boot manager intact).
Here's how I was partitioned pre-FreeBSD (these are all partitions on the same SATA 80GB drive):
C:\ Windows ME
D:\ Windows XP sp1a
E:\ Windows XP-64 beta
F:\ Longhorn 64 preview
[G]:\ unpartitioned 4GB
[F]:\ uformatted 4GB
H:\ NTFS Storage
I:\ FAT32 Storage
Before I attempted to install BSD, I used c:\boot.ini as my boot manager.
Now when I try to boot it says:
Code: [Select]
Invalid Partition
Invalid Partition
No /boot/loader
FreeBSD/i386 boot
Default: 0:ad(0,a)/kernel
boot:
Invalid Partition
No /kernel
FreeBSD/i386 boot
Default: 0:ad(0,a)/kernel
boot: _
Has anyone else ever had this happen to them? If so how can I reenable booting into Windows?Hi
You got a prob I think, if you can boot a windows, MSconfig, startup options might restore the boot files.Only other thing is to try and either load a new windows and let it setup a boot file, or perhaps a win98 startup disk, and fdisk, then set active partiton, which will set an MBR. But that would leave a load of work to do, I think I'd opt for an install of XP, and let it repair existing installation, and make a new boot file.
Hope you don't need the info on disks. If you do, I would install another HDD, load XP, then copy original Disk to save place.
Good luck
Jocko -
Will MSI Z87 MPOWER Motherboard boot into Bios with Devils Canyon?
Hey guys !
I decided to take the plunge and update to a Devils Canyon i5 4690k and purchased a MSI Z87 MPOWER motherboard which was on special. I know I need to update the bios for this cpu.
I forgot to check something crucial !
Will i be able to boot into UEFI Bios and update the Bios with this CPU ???? I have only used ASUS Mobo's and they have the bios flashback feature. I'm worried i'll have this great mobo and cpu and not be able to update !!! I don't have a standard haswell cpu to use just to update the bios to support Devils Canyon.
Could someone confirm if it will boot allowing me to update via the MSI Bios flash method.
I still have time to cancel the order if need be.
Thanks !!!!!!!!!!!!!!!!!Not quite automatically. It will recognise the CPU but may not properly work or boot. You can try booting into Windows/other OS, but you might need to update BIOS.
Once you have the updated BIOS prepared on the USB stick, you just boot from the USB stick and it will give you some instructions etc to follow, and that's all about updating.
As last resort if it won't let you do it, you can take motherboard to some PC repair center where they have SPI programming tool and they'll update BIOS even without the CPU inside -
Hi, can anyone help with the problem I am having with pro book 4440s? I can't boot into windows 7, nor can I enter the bios cause i fogot the password. the error I am getting says "windows failed to start. a recenr hardware or software change might be the cause. it then gives me options to boot from a disc but I can't do that cause I am unable to get into the bios to change it to boot from a disc.
The error message goes on :
File: \Boot\BCD
Status: oxcoooooof
info: An error occurred while attempting to read the boot configuration.
the only two options on the screen are enter=continue and ECS=exit
I just can't get pass this screen.
Please help.
ThanksHi,
If you don't already have one, use another PC to create a Windows 7 Rescue CD. Download the relevant ISO from the links below.
Windows 7 32bit
Windows 7 64bit
You should use an application such as ImgBurn to burn the ISO to a CD - a guide on using ImgBurn to write an ISO to a disc is Here. Once created, or if you already have this, tap away at the esc key as you start the notebook to enter the Start-up Menu. Insert the Rescue CD. Select Boot options ( usually f9 ), use the arrow keys to select the CD/DVD drive and hit enter. You may also get a prompt to 'Press any key to continue' - do this if asked.
When loaded, select Repair Your Computer and choose the Command Prompt. When this loads, enter the following commands and hit enter after each one - include spaces as shown.
Bootrec.exe
bcdedit /export C:\BCD_Backup
c:
cd boot
attrib bcd -s -h -r
ren c:\boot\bcd bcd.old
bootrec /RebuildBcd
bootrec /fixmbr
bootrec /fixboot
Remove the Rescue CD and try rebooting the notebook.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
Macbook Pro running Windows with Boot Camp, wanting to use iMac as second monitor.
I am using a Macbook Pro that is running Windows with Boot Camp. I want to connect it to my iMac so that I can use the iMac as a second monitor.
If it is not possible, I also have a TV that I could use using an HDMI, however when I tried this my Macbook Pro running Windows 8.1 did not detect it in the Display Settings.
What are my options? I just want to use my iMac or TV as a second monitor!!
Any help is appreciated, tMachanks!See if your equipment qualifies:
http://support.apple.com/kb/HT3924
http://support.apple.com/kb/PH14264
Ciao. -
Boot Into Windows or LInux Directly with rEFIt
Hi,
I'm installing Linux on my MBP. How do I setup the GRUB so I can boot into Windows or Linux directly without having to "--> Windows --> Windows or Windows --> Linux
THanks.Hi,
I'm installing Linux on my MBP. How do I setup the GRUB so I can boot into Windows or Linux directly without having to "--> Windows --> Windows or Windows --> Linux
THanks. -
I had a partioned HDD 250 gb Mac and 250 gb Windows. I have uninstalled Windows with boot camp but still dont have the extra 250 gb available. What to do now?
You need to remove the partition you created when you set up BootCamp.
http://www.macworld.com/article/1156195/delete_boot_camp.html -
Imac auto boots into windows bootcamp
I just installed windows 8 using bootcamp. Installed it without issue (magic mouse wouldn't work though), now i can't boot into mac. it won't even send me to the boot options. I turn on holding option, like apple says I should. But i get a blinking underscore for a second, then boots into windows 8. My magic mouse still doesn't have drivers to work. I'm not sure what to do. I have also tried holding down cmd + r, but nothing happens as well. my keyboard does work, just not my magic mouse.
Thanks for the help!Yes, when you were in Boot Camp getting ready to install Windows you missed step 1
Downloading the Windows Support Software, go back and do it now.
Maybe you are looking for
-
Cant open files via double click on file icons
hello i recently wiped my drive and did a clean install of 10.5.1 (lepperds). here are specs for my machine:macprobook 2.33ghz intel core 2 duo w/ 2gb 667mhz ddr2 sdram, 120gb HD (72.25GB available), serial # W2186148K4Y, username:billysmac password:
-
I have here an iPod touch Model number a1288 but the last number to me also looks like a 3. But that isn't my point. I'm here asking this question,. I broke my screen today and I was wondering if it mattered or not if i put on a ipod touch 2nd or 3rd
-
Airplay symbol not showing on any device
the airplay symbol not showing on any device. did al the steps on apple support. 1. apple tv and iphone/ipad/macbookair are really on the same wifi; 2. restart my apple tv don't know what to do anymore
-
Re-opening a STP Multitrack Project after exporting Mixdown to FCP
Hello- I'm running Soundtrack Pro 2.0.2 with FCP 6.0.5 and am sending my sequences from the timeline to an STP Multitrack Project. I have edited the audio as needed, and exported the final mixed tracks back to FCP choosing .xml import and open in a n
-
Anyone else waiting for a Macbook replacement battery?
My battery packed up on the 6th August and I rang Apple Care on the 7th August. They said that they would send out a new battery. After waiting a week I rang them again and the person I spoke to couldn't understand why it hadn't been shipped to me as