IMac Won't start up and beeps when turning power on.

So last night, I got the gray screen that said I needed to turn off the power to my iMac. I powered down and upon turning it back on, I got a blank screen with three (I'm pretty sure it was three) beeps followed by a pause and then three more beeps. From what I've read, I think this means there is a RAM issue.
Any advice or suggestions before I contact support??
Thanks

Honker --
Welcome to Apple Discussions!
We're other Mac users here, asking questions and sharing solutions.
It is your RAM.
You can try reseating your RAM chips to make sure they're in tight.
You can check your Memory in your Profile --
Click on the Apple icon - upper left corner - to "About this Mac."
Then click on "More Info," down to Memory. It will explain the slots and dimms there.
What does it say there?

Similar Messages

My iMac won't start up and running so slow

Hello,
Since I upgraded my iMac to OS X Yosemite its been running so slow.
Yesterday out of the blue it won't shut down it froze so I forced the shut down by holding the power button.
Today it won't start! It goes till the apple logo with the download bar then it shuts down. Tried to unplug everything, reinstall but it won't work. It said the Mac HD driver is locked as well as the recovery one. I'm trying to repair the disk now its been going for ever.
Any help...

Light blue bars is a new one.
Startup - Gray, Blue or White screen at boot, w/spinner/progress bar
Startup - Gray Screen
Startup Issues - Resolve
Startup Issues - Resolve (2)
If you live near an Apple Store, make a Genius Bar appointment to have the computer tested. Supposedly there is no charge for testing.
Genius Bar Reservation US

IMac won't start, gray screen, beeping sound

Computer crashed while using Safari. Restarted with gray screen and beeping sound

Not good, sounds like a hardware failure. Navigate to Apple Gray Screen and closely follow the troubleshooting steps, if none work the final step says to take ht machine in for service. Here is the link to the page:
http://support.apple.com/kb/ts2570
Good luck!

IMac G4 Flat Panel 1Ghz - 1 beep when turning it on.

I have an iMac G4 Flat Panel 1Ghz that beeps once when you turn it on. After doing some research, I learned the 1 beep could be no RAM or RAM problem. I replaced both the internal RAM and the easily accessible RAM with RAM from a reputable dealer that markets this RAM just for iMac G4s. I still get one beep after startup. I tried taking one stick out and all variations of using the old and new RAM with no difference. I did more research that maybe it was the power supply. By the way, originally this iMac was shocked through its Ethernet port with lightning. I since bought a new motherboard, new RAM as stated, and now also the power supply. After putting it all together, I still get one beep at startup. I have reset the PMU also. Also added a new battery. Looking forward to your suggestions.

There may be some indication of the beep's cause after some thorough
testing of the computer with some utility software; perhaps even the basic
Apple Hardware Test which would have accompanied the computer when
new could be helpful to some degree, if the machine were run in that, in a
long continuous loop to see if at some point, it may generate some codes.
However, the startup sequence itself is where such a hopeful bit of information
would more likely be generated; and this is the kicker, in that some of the info
at start-up is too early in the beginning of the run-cycle to be recorded or read.
But, you may find evidence of the issue in the Console error message reports
in that utility; and there are a few different sub-titles of places in Console to look.
Also, you may be able to find some error or crash messages, or other runtime
messages and glitches, in the System Profiler> Software> progression path.
There may be another source of the single-beep on startup tone. Not sure of
any other, though; since the Power-on self-test is generally what checks out
those computers on start-up. And the 'single beep' suggests there is a RAM
issue, as this Beep would replace the normal startup chime.
So, that early in the startup, and without a booted system, the error logs or
crash and failure reports would not be generated to be read later.
Is the computer you have really a 20" LCD and does it truly have a 1GHz
CPU? Or, does it have a 1.25GHz PPC processor, as it should? Did the
company you obtained the replacement logic board from, have anything
to say about the kinds of issues you've noted the computer displaying?
There may have been a limited duration warranty on the rebuilt board.
There have been a few of the old iMac G4 17" & 20" 1.25GHz models
generating an odd, single 'buzz' sound after the normal startup tone.
Is your's making a 'single beep' or a 'buzz' sometime after booting?
Do you have any other RAM chips of correct supported version to
replace one or both RAM slots, of reliable quality product? How was
the OS installed into the computer, or have you been unable to do so?
Once in a great while, new correct RAM could be bad on arrival. Rare.
{This is a lot like chasing gremlins or setting a trapline for gnomes.}
Maybe someone, such as the contributor alias 'spudnutty' may know of
some other factor in this matter that he has found, that may cause that.
Good luck & happy computing!

Mac Book Pro won't start from hard drive when turned on

I have a new 15 in Mac Book Pro with 10.8.1. When I turn it on it always boots to the disk utilities rather than my harddrive. I select my startup disk and reboot. It starts fine. But when I shut it off the same sequence repeats. I have verified my drive and selected the hard drive as my startup disk.
What is happeneing? What should I try?

Step by Step to fix your Mac

My 21.5 inch 2010 iMac won't stop crashing and rebooting when I put in my 8GB 1 piece Kingston RAMstick

I have the 21.5 inch 2010 iMac and I bought this Kingston 8GB 1 piece Ramstick (http://www.amazon.com/Kingston-Technology-1333MHz-KTA-MB1333-8G/dp/B007TGZ4UY/re f=sr_1_7?ie=UTF8&qid=1401114006&sr=8-7&keywords=iMac+1333Mhz+RAM) and when I put it in my Mac, and I start up my Mac, it crashes and reboots itself. Then it happens over and over again. No matter what I do. Anyone have a solution?

If it is Kingston ValueRAM, that product has been troublesome since Intel Macs were introduced in 2006.
Look to Crucial or OtherWorld Computing (macsales.com).

Old iMac won't start up and stuck in grey screen with spinning wheel

Hi, I have a very old imac which I purchased back in 2005, and has been working fine. I have left it in storage about 1 and 1/2 years ago.
Just now I try to restart it, the screen is forever stuck in the grey screen with the spinning wheel.
I tried many times off-on, hold down the apple function key but none worked.
I no longer have the rebooting CD with me. I wonder whether the computer can still be saved?
I have already backed up the contents so it doesn't matter if fixing the computer requires me to delete all my old files.
Thanks
If I am not wrong, I think it's tiger or earlier that it's using.

Do you have the Install Disc to try to boot from?
Might be time to replace the PRAM Battery, 4 years is close to their lifespan, far less if ever without AC power, & can cause strange startup problems...
http://eshop.macsales.com/item/Newer%20Technology/BAA36VPRAM/

Won't wake up and beeps when trying to

After my computer has been asleep for a while, and I try to wake it up, it will not wake up. Instead, the screen remains black and a loud beeping occurs. I let the beeping go on, thinking it will end, but it doesn't. The only way I can get my computer to work is to turn the power off on the power strip I have my computer plugged into, then turn it back on and turn on my computer. It seems to be fine after that. Can anyone tell me what the beeping means and how to fix this? Thank You!

Beeps on startup:
1 beep = no RAM installed
2 beeps = incompatible RAM types
3 beeps = no good banks
4 beeps = no good boot images.
5 beeps = processor is not usable
http://support.apple.com/kb/HT2538

HT1379 My iMac won't start up and shows a grey screen with light blue bars Online instructions have been followed bur don't seem to work

Hello
Online instructions for rebooting don't seem to working
What next

Light blue bars is a new one.
Startup - Gray, Blue or White screen at boot, w/spinner/progress bar
Startup - Gray Screen
Startup Issues - Resolve
Startup Issues - Resolve (2)
If you live near an Apple Store, make a Genius Bar appointment to have the computer tested. Supposedly there is no charge for testing.
Genius Bar Reservation US

My iMac won't start...just beeps. What do I do now?

My iMac won't start up anymore. When I hold down the power button for 3 seconds and then let go al it does is beeps 3 times and then pauses for about 4-5 sec. , the 3 beeps and pause, and so on. Everything was working fine. I shut down the computer and now can't geitback on. Is it ruined?

Three beeps at startup indicates bad or loose RAM.
You can look up videos on how to replace RAM on your model Mac, at YouTube, or Other World Computing.

My iMac 27" screen is black and will not start. The computer is making noise and beeps when i use the keyboard but I can't see anything. I have rebooted with no success

My iMac 27" screen is black and will not start. The computer is making noise and beeps when i use the keyboard but I can't see anything. I have rebooted with no success

Have a look at these. And please say what OS you have.
http://support.apple.com/kb/ts1411
http://support.apple.com/kb/ts1367

TS1587 Intel iMac won't light up and continues to make three load beeps.... What's that about, never happened before.

Intel iMac won't light up and continues to make three load beeps.... What's that about, never happened before.

Hello, sounds like bad RAM...
The following table lists the new tones and their meaning:
Tone(s)    Description
1 tone, a 5-second pause, repeat    No RAM installed
3 successive tones, a 5-second pause, 3 successive tones    RAM does not pass data integrity check
1 long tone when holding down the power button    Firmware upgrade in process. See About firmware updates for Intel-based Macs for more details.
3 long tones, 3 short tones, 3 long tones    Firmware restoration from CD in process. See About the Firmware Restoration CD (Intel-based Macs) for more details.
http://support.apple.com/kb/HT2538

Early 2008 iMac won't start up. Goes to apple logo and freezes

Early 2008 iMac won't start up. Goes to the apple logo but it has a couple of yellowish stripes on it. Then the whole screen gets the stripes and it freezes. Does the same thing using another start up drive or a recovery drive. Running Maverics. Help!

I work at an Authorized Apple Reseller and we are having the same problem with one of our showfloor models.
Model: iMac 21.5" (Brand New Core i3, etc)
Problem Description: When you press the power button, you hear the Apple chime and the screen turns on. Instead of booting normally, the screen shows the Apple logo, a spinning 'loading' circle (I call it a ferris wheel), and a loading bar below that. Typically the loading bar is for an EFI Firmware update, but I don't remember updating the iMac recently. Anyways, the loading bar moves once, starts over, and then the iMac shuts down.
Possibly Related Issue: Several days leading up to this issue, the computer was very noisy. It sounded like the hard drive was working overtime on indexing or something, but it ran fine and spotlight wasn't even indexing at all. I walked by it yesterday and noticed it wasn't on. I pushed the power button, and the problem it has now started.
I will keep searching the forum for a solution, but I have a feeling this is a hardware issue that will need to be serviced by Apple.
Sidenote: If anyone has any experience contacting apple as an Apple Reseller about repairing a computer before the warranty starts, any advice would be greatly appreciated

Imac won't start beyond white screen apple logo and circle

Imac won't start beyond white screen, Apple logo and spinning circle

Follow the steps at > Mac OS X: Gray screen appears during startup

My phone keeps flashing and beeping when connection to iMac via USB

my hone keeps flashing and beeping when i connect it via the USB to my new Imac
cant understand why it will not work

peterjimmyclark,
One of your USB connections may be loose/not fully inserted, or it may be a bad USB cable. It happened to me once, when a powered USB hub was not properly seated.

IMac Won't start up and beeps when turning power on.

Similar Messages

Maybe you are looking for