Image "flashing" as move adjustment sliders in develop mode

using LR4.1 with iMac i7, 8gb ram, system 10.7.3.
after a few edits, 15-20, there is constant delay as the image is blanked, redrawn, blanked, redrawn, etc. This occurs with most adjustments but does not start until 10 or 12 images have been processed.
have seen this referenced before but cannot find the thread.
this did not happen with lr3.6.
any ideas?
thanks
vince

dmcrescent wrote:
We're 3 for 3 fixing this with this technique, on Mac. Thanks for reporting back.
The flashing is really getting annoying.
For example, I was cropping an image today in 4.1RC and I had already cropped several images w/o a problem. I kept the same aspect ratio, dragged in the upper left and lower right to get close to what I wanted for the size of the crop and then clicked on the image to drag it into place.
During the drag the image flashed, a new crop rectangle was entered into the history and the actual crop radically changed. The zoom level and the placement jumped in value. I had to resize the crop and again attempt to move the image into the crop area. It flashed again during the first drag operation. A new size of crop was created and the zoom level again changed. Rinse and repeat. I simply could not get a proper crop. NOTE: During the entire 'drag' process I did not release the mouse. The flash happened during the drag.
I have experienced this exact problem in prior instances of LR and it affected the development sliders, too. The only remedy I have found is to exit LR and once again it will work correctly for a handful of images. When it starts up again I immediately exit and restart.
Adobe really needs to find out what is going here and either squash this bug or let us know that 'something' besides LR is causing the problem. Note, I have never had a similar problem in any other image editing software be it from Adobe or anyone else--just LR.
27" i7 iMac; 2.93GHz QuadCore CPU, 16GB DRAM; ATI Radeon HD 5750 1024 MB

Similar Messages

Why can't I see the changes in my image when I move the sliders in LR's Develop Module

When I use the quick develop tools in the LR 5.3 Library module, I see the changes in the selected image. When I switch to the Develop Module, when I move the sliders for the different tools, nothing happens to my image. When I go back to the Library module, I see the changes, but not in the Develop Module. Why is this happening? I have a PC running Windows 7. I have 30 gigs of space on my C drive. I recently updated my LR to 5.3 and subscribed to CC. I uninstalled the LR program and reinstalled it from the cloud. Same problem.

Hello lakota85usa, the [http://kb.mozillazine.org/Profile_folder_-_Firefox#Mac profile folder is hidden Mac OS X 10.7 and above], not in your version(10.6.8), see if the "Showing hidden files and folders on Mac OS X" in the next link is helpful: http://kb.mozillazine.org/Show_hidden_files_and_folders#Mac_OS_X
thank you

Lost BASIC section of adjustment panel in DEVELOP mode.

Editing my first image in Lr5, v7. Somehow I have lost the BASIC section of adjustment panel in the DEVELOP mode. This adjustment panel now starts at TONE CURVE, just under the TOOL STRIP. How can I get the BASIC section of the adjustment panel back???

Right-click on Tone Curve or any other tab and choose Basic again.
Or in develop Mode press Cmd+1 (Ctrl+1)

When I use the and - keys on their own it used to adjust exposure (in develop mode) but now it adjusts contrast and i can't work out how out change it back to exposure?

How do you change + and - keys back to adjusting exposure rather than contrast? I can't find any documentation about this.
Thanks :-)

NO way!! thats os easy LOL thanks heaps, i really appreciate you responding :-) problems solved!!!! :-) cheers mate

Develop mode doesn`t work in realtime

Winsows 8.1 x64
Lightroom 5.4 CC
When I move any sliders in develop mode image in main view doesn`t change, but in filmstrip changes. If I switch to another image and back all changes applies.
Please help.

I'm having the same problem. Started just after I upgraded to Lightroom 5.4 CC

Wrong image preview while I am moving adjustment sliders in Aperture

When I move adjustment sliders, a different recently and previosly adjusted image will frequently show in the viewer while the slider is being moved. Sometimes parts of two or more previous images will appear and sometimes in the wrong orientation. This makes it makes it impossible to see the result of the adjustment until I release the slider which is annoying. I cannot reliably replicate the problem but it happens often. It seems random as if the wrong image is in a cache and not refreshing properly.
Details:
MacPro (New) 6-core 32GB RAM, D300 Graphics OS X
Aperture 3.5.1
Moved Library from old machine (2007 MacPro) and rebuilt library
250K images all referenced
Library is big (236GB)
Files are RAW Canon 5dMk3 and tend to be about 30MB
Preferences:
Import: standard previews
Previews: generate automatically and share when quitting (half size medium quality)
library created new previews for all images when I rebuilt it
machine will run processor and memory hard, sometimes around 90%
Might it be a poor choice of preference settings or a corrupt library? Anyone else ever experience this condition? I would appreciate any suggestions.

On a conceptual level, it should not be a problem, but a Preview is related to a Version, and a Version is related to one Original/Master. There can be multiple Versions, all of which must point to a single Original.
You are not adjusting a Preview, but rather a Version. What you see as you adjust is a new rendering of the Version, and is not the Preview you saw when you decided to adjust, I believe.
There are on the order of 8 or 9 other files related to every Original even if only one Version in the Package that is the Library. Very complex indexing going on at all times.
Please open an image, and before attempting to adjust, click on File, and choose Show in Finder -- is the Finder image the correct one? And in the correct location?
Now attempt to adjust. Does the image change? If so, again us Show in Finder and check.
Ernie

LR 4.3 continuously refreshes the image in develop mode

I am using LR 4.3 with Photoshop CS5. I have found that after editing a picture in photoshop (transfer from CR2 to .TIFF file) it correctly transfers back into LR as an updated .TIFF file with all edits from PS. However, on further editing of the picture in LR the image is refreshed after EACH edit (ie. file reloads into LR taking a few seconds). If I am trying to apply an edit as the refresh starts then that edit gets lost i.e. NOT applied. The refresh happends after ANY change to the file. It is very frustrating as it wastes time and makes editing slow (have to keep waiting for a refresh). It does not appear to happen in that way when editing CR2 files.
I have only noticed this feature since installing V4.3 although it may have been happening in previous versions. Is there any way round this problem?
I am using W7, i5 2.5 Ghz processor and 8 GB ram with dual screens.

This problem has existed in LR since about 3.0.
If Lightroom creates a tiff or psd for external edit, then when it is returned to LR and one attempts to further adjust the image, the adjustment sliders gray out, the photo reloads, then the sliders become active again.
Many folks say it is caused by the program writing to XMP, to turn "automatically write to XMP" off. Does NOT work! It is not the root cause.
Bampton says to flick to the next photo. Does NOT work. This is not normal behavior.
What will work to stop the activity is to close and reopen the program. This is not normal behavior.
This will not occur if the file(tiff or PSD) is written by Photoshop. If you are using 4.X and CS6 then Photoshop will write the file at the end of your session in PS. No blinkies.
If you are using 3.X and CS5 together you will not experience the problem since again PS writes the file. No blinkies.
If you are using 4.x and CS5 or under you will encounter the problem, blinkies!
I have not encountered the problem with any file written by the OS or any other program.
The problem is ONLY with tiffs or PSD files created by LR for external editing. It would seem to me this is a bug.
It is not a major bug, but annoying.
I have filed a bug report again here......http://feedback.photoshop.com/photoshop_family/topics/lr_continuously_refreshes_the_image_ in_develop_mode?rfm=1
Please drop by and sign it...........maybe we can get some attention this time. I filed a bug report before, but can't find it.
Thank you for your time,
Rich

In Develop mode not all of the adjustment panels are showing. The basic panel is not evident.

In Develop mode not all of the adjustment panels are showing. The basic panel is not evident.

Right click near to one of the other options e.g tone curve and a popup list will provid you with the option to display or hide the options. see image capture.

Flash video Movie ad banner tutorial

Does anyone have a link for a Flash tutorial that shows how they make the banners for coming soon movies with the video inside? Sometimes they expand. Or what the genral specs are?
thanks,
Frank

What I need is to be able to take flash 9, AS3 swfs, import
them into a Director 11 project, and interact with the flash
funcitons, call them, set properties, etc. Despite the
documentation on the Adobe Director page saying this is possible, I
have not been able to get it to work, and other posters on this
board have stated that it is currently not possible. Any clarity or
examples would help. I notice Director 11 has no entries concerning
Director/flash programming yet on the Adobe Developer page, just
tutorials for MX2004.

What is happening to my Aperture adjustment sliders?

After the Lion upgrade, Aperture adjustment sliders are buggy. I can adjust an image, but when I go to the next image, the slider either has no effect or it alters the previous image I just left. The only "fix" I have found is to exit Aperture and relaunch.
HELP!

Unless you give us the URL we can't possible begin to help.
Happy Holidays

Lost adjustment sliders exposure ,highlights,shadows,ect.

I was working in develop module version 5.7 and lost me adjustment sliders,all the top sliders are gone from hue ,sat, luminance up. the are not collapsed or nothing they are just gone?

You've inadvertently hidden the panel. Right click one of the panel headings, and tick the Adjustments option.

Maximum frame bytes in 15 fps Flash 8 movie

I have a Flash 8 movie, with several motion tweens that take
the average frame size from 200 bytes up to 1000 at about halfway
thru my movie. What is the max acceptable when designing movies at
15 fps? And is there a way around this that won't cause delays in
downloading?
thanks.

"David Stiller" <[email protected]> wrote in
message
news:es1cjd$h6p$[email protected]..
> Steve,
>
>> I need to combine multiple source videos into a
single
>> Flash video file. Trouble is those source videos
don't
>> all have the same frame rate. For instance in one
piece,
>> the source frame rate is 13 fps, and in another it
is 30 fps.
>
> Aha. Actually, not to worry. :) Dynamically loaded FLV
framerates
> are independent of the SWF's framerate. So leave those
FLVs outside the
> SWF and load them in -- you'll be set. (See the "Working
with Images,
> Sound, and Video" > "About using FLV video" topic
under the "Learning
> ActionScript 2.0 in Flash" doc.)
I'm soprry, I should have been more explicit. I am importing
to Flash 8, but
I have to publish as Flash 6 so it's not flv files I am
creating, so thus
not dynamically loaded flv. These files are being presented
inside an
Authorware file so Flash 6 is a must ... I cannot use the
Flash AX control,
I have to use the internal Flash suppor provided by
Authorware.
>
>> Is there a 'best practice' method for combining
these
>> videos in Flash and retaining the best possible
quality?
>
> Do you mean compression-/bitrate-wise? If so, that's one
of those
> "more an art than a science" things. But framerate won't
make a
> difference.
No, compression is less of an issue for me ... I have a
handle on that black
art. It's just the reconciliation of multiple frame rates I
need to get to
the bottom of :-)
Steve
EuroTAAC eLearning 2007
http://www.eurotaac.com
Adobe Community Expert: Authorware, Flash Mobile and Devices
My blog -
http://stevehoward.blogspot.com/

Imported image's position moves when updated in Indesign CS6. Why??

After modifying an imported image from illustrator, the imported image's position moves within the frame of Indesign CS6 when the link is updated.

You have not provided any relevant information, so nobody can know. you can simply have added content that expands the bounding box. Well, whatever, ask in the relevant forums and be much more specific.
Mylenium

Image in Develop mode - Orange Tint

I'm having an issue with my images when I switch to Develop mode. There is an orange tint that appears in each image while I'm tweaking it. Sometimes the tint is minor like the example I've attached and other times it makes it very difficult to edit the image. When I return to Library mode or export the image it's normal.
I've attached the same image in both Library and Develop mode to illustrate the issue. I've highlighted the problem areas with Yellow call-outs in the image that's open in Develop mode (note no adjustments have been made the tint appears as soon as I switch to Develop).
My system uses two video drivers (they are current as of today):
Intel HD Graphics 4000, Driver version 10.18.10.3621
NVIDIA NVS 5200M, Driver version 340.84
Thanks in advance for any assistance.
Jack

DOH, so much to learn!
Thanks

Why are my processed images now sharper in the Library mode than in Develop mode (LR5)?

In LR 5. Recently I noticed my processed images are sharper in the Library mode than in the Develop mode. This makes doing adjustments difficult because I can't really tell the effect of the adjustments.
PC, i7, 24GB RAM.
I've tried purging the Camera Raw cache. It's been suggested to purge the Preview cache but I cannot find the Preview cache file. It's also been suggested to clear the Preferences but those file don't show up in a search either even though my PC search is set up to show hidden files and folders.
Any solutions?

Images can be different between the camera-rendered preview you see before Import and the default Adobe rendering, but after import the thumbnail in the LR grid view shouldn’t be a different tone than the image in the main area. Is that what you’re saying you’re seeing?
Can you show us a screenshot with both the thumbnail filmstrip and the central area visible as well as the histogram?

Image "flashing" as move adjustment sliders in develop mode

Similar Messages

Maybe you are looking for