Image format for best quality photos

Hi there, I'm pretty new to photo-editing and have a question about preserving image quality:
I've heard that re-saving jpegs in Photoshop (Elements 12) makes them lose quality - even if no editing is done - and that saving jpegs in formats like PNG and TIFF can preserve the quality of the original image. So, if I edit a jpeg image in PSE and then save it as a TIFF, does that mean the quality of the original image is preserved 100%? If not, how can I fully retain the quality of jpegs after editing and saving them?
Thanks for your help

Hi Phoebe2014,
Yes you are right that each time you open and save a jpeg image , the image compresses and you lose small amount of information. As i believe that it should not lose quality of image when you are saving a jpeg image to tiff format because compression occurs when you re-save a jpeg image to jpeg format. You can read more on below links.
Photoshop Elements Help | Saving and exporting images
What is the Best File Format to Save Your Photos In? PSD * TIFF * JPEG * GIF * PNG - Digital Photography School
Thanks,
Raushan

Similar Messages

I would like to be able to size images by kilobytes instead of pixels--is this possible? I use I-Contact which requires a maximum of 70kb per image. For best quality I want to make the images as close to 70 as possible. Currently I choose a size of 300

I would like to be able to size images by kilobytes instead of pixels--is this possible? I use I-Contact which requires a maximum of 70kb per image. For best quality I want to make the images as close to 70 as possible. Currently I choose a size of 300 pixels on the shortest side but sometimes this gives me an image of slightly greater than 70kb and sometimes the image is just 30-40kb. Is there a way to be more precise in reaching but not exceeding 70 kb?

That is not a feature of iPhoto - suggest to Apple - iPhoto Menu ==> provide iPhoto feedback.
You can opnly resize using the available options and file size is not one of them
LN

What's the best ink and paper for hp deskjet f4140 for best quality photo prints

what's the best ink and paper for hp deskjet f4140 for best quality photo prints

Hi,
For inks, no choice but for papers please use the following shop (or use information to buy elsewhere):
http://www.shopping.hp.com/en_US/home-office/-/products/-/-/CB587A?HP-Deskjet-F4140-All-in-One&Targe...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Exporting format for best quality/file size

Hi,
Help!!
Nubie to after effects, pretty much got my head round most of the basics except exporting/rendering my projects.
I can export to Encore and get great results as a dvd...problems i have are as follows.
If I wish to create a presentation for a plama screen running on a laptop what might be the best format to render. For example I have tried .AVI but the file sizes are huge..gigs n gigs worth!!
I have a 720 x 576 project I would currently like to export but do not know how to get the right balance of quality and file size.
Are there any presets anyone knows of?
Thanks!
Regards
Ian

Well, if you are referring to plain desktop playback from a Windows-based laptop, nothing beats WMV. It will play smoothly and if you ramp up the data rates to somewhere between 2 and 3 Mbit/sec, you see almost no adisturbances at this resolution. You will need to work in square pixels, though, or it may look crooked, so nest all your work in a respective comp for final render.
Mylenium

Which kind of paper is suitable for printing best quality photo by hp officejet 4500 wireless?

Hi
I have a "hp officejet 4500 wireless" printer and want to print best quality photo from my digital camera. Which kind of paper is suitable for my job? Please kindly advice me.
Best regards,
Faezeh Dibaei

The link below will bring you to the HPshopping website for the Officejet 4500 supplies. Click on the "Paper" link at the top of the webpage and it should show you the supported paper types. I would personally asuggest the Advanced photo paper for photo pritning.
http://shopping2.hp.com/en_US/home-office/-/products/-/-/CB867A?TargetPage=productsupplies
Binary_Zen (worked at HP )
Click the white Kudos star to say thanks
Please mark Accept As Solution if it solves your problem

What format to import AVCHD for best quality and how to export?

Hi
My boss has got himself a panasonic HDC camcorder of some sort that is formatting the video in AVCHD.
Basically he was using adobe premiere pro from around 2003 on an pc running xp and loved it. My I.T. director persuaded him to buy an iMac and Final Cut Pro 7. As we stand now he states he hates macs because he can't figure out how to get his home movies off his camcorder and onto a dvd without them looking blurry and fuzzy.
Can anyone advise what format we should be importing the AVCHD files into final cut pro for best video quality and how we should be exporting the final movie for best quality to go onto dvd?
I will also note that he is using toast 10 titanium to burn his movies to dvd.
Also he is not looking to burn to blu-ray as none of his familiy have blu-ray players. He just wants his HD footage off camera and onto a dvd with the best quality picture he can get. Also his movies are approx 2 hours long and he has just ordered some Dual Layer DVDs
Thanks
Kieran

I take it you mean Pro Res 422 from the AVCHD plugin options? And not going for any of the other 422's with bits in brackets?
Sorry for being dumb in this area but my boss and i are both pretty new to FCP
How do i ensure i edit in a pro res sequence?
Export straight to quicktime no quicktime compression or anything?
Thanks for your help
Kieran

Export settings for best quality for pages with letters etc.

Hi, I am trying to make video of a musical piece, featuring the score of the piece with pages turning following the progression of the music. I made the video in Adobe After Effects CS5 and exported it so it would be lossless. The video itself is a .mov file and looks great when I view it in Quicktime, but when I import it into FCE the quality goes down a bit. I don't know if FCE is handling the clips correctly or if it's just for making it quicker to view. Any suggestions on export settings from FCE for best quality of a video of this nature, so that the notes are clearly readable.
Thanks in advance
Ps. It has to be in a format suitable for Youtube.

Under "Sequence" and in "Settings" and in the tab "Render Control" I have: Frame Rate: 100% Resolution: 100%.
If that is what you were referring to... but under the tab which is called RT and is located left of the timeline and left of the timecode. There I have checked : Safe RT, (Playback Video Quality) Dynamic, (Playback Frame Rate) High.
There might be a way to import the clip in better quality (so it doesn't downgrade the quality).
Was mostly trying to find out with the export but it might have something to do with this.
Thanks

Setting for best quality in compressor

Hi.
I'm running FCP 5.1 and Compressor 2.3.1. For best quality videos on youtube I've heard it's a good idea to max out the free space they make available to you. What are the best settings I should use in Compressor for maximum quality uploads to youtube? Also what's a good setting for good quality video with a smaller file size? Also I should note most of my videos uploaded are of short duration 1 minute to 5 minutes. I've been using the settings DVNTSC and it's okay but maybe there's something better you can recommend? Also I tend to use Toast to burn DVD's. What's a good setting for best quality dvd's?
thank you!

For Youtube encoding, read these: http://www.kenstone.net/fcp_homepage/you_tube_redux_gary.html and http://www.kenstone.net/fcp_homepage/you_tube_hd_gary.html
Keep in mind that the more compressed the file is (smaller file size), the lessor quality.
As for DVD compression, I've always found Toast's encoder to create poorer quality DVDs than Compressor or DVD Studio Pro. The best method would be to export a self-contained or reference movie from FCP (Do NOT use QuickTime Conversion), then import that file into Compressor. Use the DVD preset in Compressor that best matches your movie's duration. You can duplicate and adjust presets as needed for your particular movie. Compressor will create the needed MPEG-2 video file (.m2v) and Dolby Digital audio file (.ac3). Import those two files into DVD Studio Pro for authoring and burning.
-DH

Tips for best quality?

I've got a full res SD quicktime movie that I want to put onto DVD....how can I get the best quality out of this video on DVD through compressor....should I just choose best quality with a 2 pass vbr?

Does anyone have any tips for best quality imovie3 exports but keeping file.
Here is a quick Apple tutorial introduction that may be of some help:
http://www.apple.com/quicktime/tutorials/h264.html
I personally use the QVGA (AKA "Internet Content") H.264 settings for everything from family site clips to iPod compatible files. 400 kb with stereo 128kb audio should produce a good quality file at 29.97/30 fps which is on the order of 4 MBs per minute of content and are suitible for DSL/Cable QuickStart viewing. You can, of course further reduce file size by decreasing data rates, frame rates, target display size, etc. However, to my mind, the quality suffers and becomes unacceptable for my purposes. QT Kirk has other tricks such as further halving the dimensions and then doubling the playback display. This would get you down to the approximately 1 MB per minute mark or sub 1 MB rage when couple with reduced data/frame rates. Basically, you are only limited by your own idea as to the minimum level of acceptable quality.

ITunes 11 MP3/320 - Joint or normal stereo for best quality ? Thanks!

iTunes 11 encoding MP3 @ 320 - Joint or normal stereo for best quality ? Thanks!

OK, I digged a bit deeper.......
Apparently, the common LAME MP3 encoder uses JOINT mode throughout bitrates ...... ( have a look at the wikipedia pages for MP3/joint stereo)
This leads to a) smaller files and/or b) gives or frees up "bandwidth for signal encoding when/if necessary.
The iTunes encoders algorithms are unknown, thus we need Apple to help with this issue.
If "normal" = separate stereo, i.e. separate encoding of the left and right audio channel, then there might be rather a quality loss despite high bitrates and large files, because that would mean using 160kbps/channel only , as MP3s are limited to 320.
Until Apple does not specify and explain this in detail, I myself will no longer use iTunes for encoding.
( @keeferaf, many thanks, in "userdefined-MP3-encoding" you can select those values )

What is the most suitable image format for processing with imaq?

Hello.
What is the most
suitable image format for processing with imaq?
I want to capture an image of a usb webcam, store and
then process it with imaq. I need to know what format to save the
captured image can then load and process it with imaq vision.
Thanks

The only criteria is: don't use JPEG for anything scientific! The compression involved with saving JPEGs means you always lose information. I tend to prefer PNG - it's compressed, but non-lossy, and also widely supported. TIFF is fine as well, but I don't think has any advantages over PNG for this application. JPEG2000 can give good non-lossy compression I think is slower to read/write than PNG.

AVCHD - Blu-ray: what settings for best quality?

Hi Folks,
I've got a BD-burner and I want to export my edited HD avchd footage to BD with minimal quality loss.
Can you please advice me on the right settings?
* should I go for the 'Match Sequence Settings' option in the export menu?
* or probably select 'MPEG 2 Blu-ray' option for best quality?
* what is better in terms of quality of the outcome: 'MPEG 2 Blu-ray' vs. 'H.264 Blu-ray'?
Finally, I have a question related to Adobe Encore: the same footage exported through Adobe Media Encoder in 'MPEG2 Blu-ray' (takes 13 GB), Adobe Encore reports will take only 8GB?!? I'm puzzled here. How come the same footage got exported into files with different length? Is there a way to set the Encore to export in the maximum possible quality? Where can I locate this menu setting?
Thank you very much!

Forgot to mention, I'm using CS5 and I shoot in avchd, 30fps,
1980i

Converting HDV to SD for best quality

I shot with Sony HDV camera, need to end up in SD. How do I convert/compress to SD for best quality so I can work in Final Cut SD timeline?

According to Apples website you can. Here is the link.
http://www.apple.com/finalcutstudio/finalcutpro/specs.html
Good Luck. Hope all goes well.

Best image EXPORT settings for best quality

What should i have my export settings at when exporting to a jump drive to give to clients for web and printing use???
When i see my images uploaded on Facebook for example, the qulity looks poor which worries me that when printing the quality will be poor as well. Am i missing something in the setting for exporting? What is the proper way to export for the best quality image? HELP!
My settings now under Aperture>Presets>Image Export:
JPG Original size
300 dpi

t_hall10 wrote:
The information provided was helpful, but did not completely answer my question...
Are there specific settings with-in Aperture I can set for exporting so that clients have the ability to print as wanted and post on the web as wanted whithout losing any major amount of photo quality?
No, not for one size fits all.
I do appreciate this may be a frustrating answer, but non-the-less, that's how it is.
t_hall10 wrote:
Should I be gving 2 folders of pictures, one for web use and one for printing use? If I were to do that, what should the exporting setting be set for both folders?
Maybe, it's your choice.
Let's go through the settings.
The only real quality setting is for JPG compression. 12 is virtually no (lossless) compression but gives huge file sizes which may breach a websites limits.
A 16MP images on quality 12 will be about 22MB. 11 brings it down to 8MB and 10 down to 7MB. You'd be very hard pressed to see the difference between a 12 and a 10. But if you want to feel you are giving the best quality without the extreme file size, go for 11.
The the vast majority of web sites, like facebook, will either resize uploaded images and/or re-compress them. They may also crop them to a different aspect ratio to fit their browser software.
Many report the best size for upload to facebook, for small images is 960 pixels on the long side. For large images it's 2048. For different websites it may be different. It is discussed on many photography sites and blogs. You will find some promoting the 960 / 2048, and others with their own preferences. Here's a good one which also shows you many ways FB will mess with the images:
http://havecamerawilltravel.com/photographer/images-photos-facebook-sizes-dimens ions-types
The safest colour space is sRGB (Mac profile: sRGB IEC61966-2.1) as it will more often be right than wrong. You should preview your images on screen with this profile to get a feel for how it will look and avoid unexpected colour shifts in your files. Ideally your screen should be calibrated so you know what you are giving them is accurate.
To understand the printing issue, try this exercise:
If you have a printer installed on your Mac, it probably also installed some printer profiles. In Aperture, look at one of your nicer vibrant images. From the view menu turn on 'Onscreen Proofing' and then from the 'Proofing Profile' sub menu, select one of your printer profiles and look at how the onscreen image changes. Repeat with each of the printing profiles and see how the image changes each time.
This is only a fraction of the colour shifts that will be occuring after you give your file to someone and they print it on their own uncalibrated system with their uncalibrated printer.
Many photographers don't offer full size images to their clients. They will usually give them smaller versions for their own use, which may include small size printing.
They will either do the main printing themself on their own calibrated printer, or work with a print shop, and may have installed calibrated profiles on their system for the shops printing equipment so they can use onscreen proofing to gauge what the pictures will look like when printed on that equipment.
But if you are just giving a file to someone, you lose all control of how they will print it. Even experienced photographers and computer users can struggle to make the prints match close to what they look like on screen.
Most often photos will appear too dark, or the colours look wrong, or it lacks sharpness. There are some settings on the export presets for gamma and blackpoint compensation. Gamma will brighten the image for when it's printing too dark, and blackpoint will try to stop the shadows turning black (within the chosen colour space). But as you don't know in advance whether the images are going to print too dark, or the shadows are turning black, you can't really set these for a one-size fits all scenario.
So there are not many settings to help you here.
You are actually moving into the realm of defining your product. You could, for example, ask the client which site they intend to publish the photos on, research that site and produce files optimized specifically for that site.
You also need to decide what size (resolution) files to give them for printing and whether you are happy giving away your full size images.
These choices will lead you to a number of a different files sizes as 'your product', all should be in sRGB colour space, and all with quality 10 or 11. For any client's who know how to make use of a wider clour space like Adobe RGB for printing, they will probably ask you up front to supply the print versions as such.
Next, for each size and usage, you now need to sharpen these images.
This is because sharpeing is best applied to images that have been resized to their intended output size and should be sharpened in accordance with how they will be viewed. Images displayed on computer screen generally need less sharpening than those that will be printed. Depening on the printer, the images may need some oversharpening in the file, in order to appear crisp and sharp in the print. As you won't be controlling the printing process you should probably avoid oversharpening. The bottom line is, if people are taking on the task of their own printing, they'll need to figure out what they are doing to get good results, or use a commercial printer.
Andy

When importing a CD to iTunes which will then be downloaded onto a ipod, which is the best setting format for sound quality?Im unsure if once i save setting for CD import, do i then have to change settings to sync with my ipod?

When importing a CD to iTunes which will then be downloaded onto a ipod, which is the best setting for audio quality? Also once CD is downloaded do i need to change the setting to sync with my ipod?

gobbybird40 wrote:
Also once CD is downloaded do i need to change the setting to sync with my ipod?
I'm not sure what settings you are referring to. If you mean the import CD settings, there would be no point in changing them after importing the CD, would there?
As for the best setting for audio quality, it's down to your preference. Many people will not hear the difference bewteen one setting and another. The best thing to do is import the same song several times using different import setttings (and change the song title so you know which one is which) and then listen to them on your iPod. Then decide.
Unless you have specific reasons for using the WAV setting, don't use it. It will use up a lot of space on your iPod and you cannot tag WAV files in the same way as the other formats.

Image format for best quality photos

Similar Messages

Maybe you are looking for