Image of line , kant do any adjusments ,??

Imag of line ??? . Can do any adjustments . Please help

Imag of line ???
Hasse -
you get this off-line error message, if the originals of your image is on a drive, that is not connected, or if Aperture cannot find the original, because it has been moved or deleted. Sometimes this error may occur, if you resored your Aperture library from a backup and it has not been restored correctly. What happened, before this problem occured?
And what is your Aperture 3 version exactly? Where do you store the original image files? As managed in your Aperture library or on an external drive?
You can fix "Image offlin" errorsby reconnecting the image versions to their originals, if you know, where the original file is. See this manual page:
Aperture 3 User Manual: Working with Referenced Images
Scroll down to: "Reconnecting Missing or Offline Referenced Images"
-- Léonie

Similar Messages

Where to upload images on-line for storyboarding?

Where to upload images on-line for storyboarding? Or what does it take to produce a storyboard from a Adobe Story Plus Script?
Any suggestions are welcome ; )

Hi Richard,
See if this help article works for you: Adobe Story Help | Storyboards. You can create additional feature requests here: http://adobe.ly/feature_request
Thanks,
Kevin

Fatal Internal Error: "image.cpp", line 13192 when trying to insert a cursor to graph

NOTE: This IS a duplicate post from the Breakpoint. Text slightly changed. The post in Breakpoint can be deleted. All comments should be placed in this thread.
I resolved the "Fatal Internal Error: "image.cpp", line 13192 when trying to insert a cursor to graph", but would like to share to find out if others have seen this and to determine whether this is a bug, or if it's time to redo my PC, or buy a new one..
I have an existing graphs (qt 6) which originally had 2 cursors. This occurred while trying to add the third cursor.
Up until attempting to add the last cursor, the program worked great, and I had been running tests for a while. However, I do recall seeing this problem when creating the original cursors, but not to this extent. Plus I don't remember the original error message from that time.
I needed to add one more cursor to the existing graphs. As soon as I add a new cursor and set it's properties, I get a nasty error message and without warning LV8.2 simply closes itself (well, the only warning was the error message. Tried it 3 times, same result.
Here are the steps:
Shut down the PC, went for a coffee, rebooted the PC. Opened the LV project, opened the VI. Immediately went to the graph properties to add the new cursor by doing the following steps:
Right click graph indicator icon on block diagram.
Select Properties.
Click on cursor tab.
Click on Add
Select Cursor 2 (3rd one, newly created)
Change color
Select cursor as a line
Remove checkmark for "show cursor"
Click OK
I need to do this to 3 other graphs, same steps. And as soon as I get to the step before clicking OK, I get the error message.
I managed to get an additional one done, by immediately saving after each step (yep going in & out of the properties). But I've had this problem before when creating the first two cursors.
Is it a bug? Anyone else seen this? Using LV8.2. And the message is right about LOOSING ALL unsaved work!!!!
Here are more observations:
Tried creating a new one on the second graph. As soon as I clicked on the color, it crashed!
See the error explanation below. It is really clear, now anyone can solve it    LOL!!... According to the error log, there's a bad image out there
.\manager\image.cpp(13192) : DAbort: bad image in ValidateImage
$Id: //labview/branches/Europa/dev/source/manager/image.cpp#47 $
0x007A81E8 - LabVIEW <unknown> + 0
0x007A7BDB - LabVIEW <unknown> + 0
0x00829D74 - LabVIEW <unknown> + 0
0x008546CD - LabVIEW <unknown> + 0
0x00C054E6 - LabVIEW <unknown> + 0
0x0081B9C8 - LabVIEW <unknown> + 0
0x0081EB9A - LabVIEW <unknown> + 0
0x0084D9D4 - LabVIEW <unknown> + 0
0x00854663 - LabVIEW <unknown> + 0
0x00C054E6 - LabVIEW <unknown> + 0
0x0085F7A1 - LabVIEW <unknown> + 0
0x00BBACDD - LabVIEW <unknown> + 0
0x00C06A2F - LabVIEW <unknown> + 0
0x0085AA46 - LabVIEW <unknown> + 0
0x00C06A2F - LabVIEW <unknown> + 0
I observed the title bar after making changes to the properties. I noticed that 3 out of 4 times, while changing the properties of the graphs to include the cursor, and saving after each & every step, that there were no stars appearing on the title bar to indicate "unsaved changes". Saving was also much slower than usual. I suspect, the program never got to placing the star before saving occurred. However, I am noting everything.
After creating the cursors, saving was and is normal, and the program runs well..   I have run tests without problems.
Does anyone have a clue at what causes this? Has anyone seen this before?
Thanks,
RayR

Hi Donovan,
I can't remember seeing this elsewhere. When I get a chance, I'll create a new (blank) vi with new graphs and will repeat the steps.
I will let you know if I see this in the new vi.
Thanks!
RayR

How can I get two hand drawn images to line up?

How can I get these two images to line up? I am stumped.....I have used auto-align, scale, etc.....but I get one side right then other side not aligned.

You are dealing here with a difference in image size between the top and bottom sections and perhaps a difference in verticality.
Consider the bottom units. The left side should shift right and the right side should shift left in order to align.
Your next move would be the adjust the size of one of the layers by using Edit > Transform > Scale. Hold down the Option key to maintain proportion.

How to send image file through mail without any attachment

Plz tell me how to send image file through mail without any attachment ( i mean not converting that image into pdf or any format ) i want to send that text or image through mail .

Hi Sandeep,
I think you can setup the type of email in Shared office Settings in transaction S016.
There is an option called <Preset document classes>
You choose this pushbutton to branch to the maintenance screen for the document classes that are directly displayed to users in the Business Workplace for selection when they use the Create function. The name under which the documents are displayed can also be maintained.
http://help.sap.com/saphelp_nw70/helpdata/en/6c/69c30f418d11d1896e0000e8322d00/content.htm
Haven't tried it though.
Regards,
Siddhesh

Help! Images not showing up in any browsers

I'm using Dreamweaver, and I can't get the images to show up
in any browser--Safari, Firefox, or IE. In Dreamweaver, it worked
in Safari, but now when I uploaded it, none. Please help, urgent!!
http://geocities.com/snwboardnchic99/
I know it's probably so simple but I can't figure it out!
Thank you!

Quick guess..... you haven't uploaded the images.
btw You have javascript above you DOCTYPE - you need to
remove it.
Jo
"daveygrow" <[email protected]> wrote in
message
news:ef3obs$4rt$[email protected]..
> I'm using Dreamweaver, and I can't get the images to
show up in any
> browser--Safari, Firefox, or IE. In Dreamweaver, it
worked in Safari, but
> now
> when I uploaded it, none. Please help, urgent!!
>
>
http://geocities.com/snwboardnchic99/
>
> I know it's probably so simple but I can't figure it
out!
> Thank you!
>

There is no address line to put any web site addresses

I have down loaded Fire Fox so many times and each time there is no address line to place any web site addresses.
I have a laptop using windows 7

Make sure that you do not run Firefox in Full Screen mode with all toolbars hidden.
* Press F11 to toggle full screen mode (Firefox/File > Full Screen)
If the menu bar is hidden then press the F10 key or hold down the Alt key, that should make the menu bar appear.
Make sure that toolbars like the "Navigation Toolbar" and the "Bookmarks Toolbar" are visible: "View > Toolbars"
* If items are missing then open the Customize window via "View > Toolbars > Customize" or via "Firefox > Options > Toolbar Layout"
* If a missing item is in the toolbar palette then drag it back from the Customize window on the toolbar
* If you do not see an item on a toolbar and in the toolbar palette then click the "Restore Default Set" button to restore the default toolbar set up.
See also:
* http://kb.mozillazine.org/Toolbar_customization
* https://support.mozilla.com/kb/Back+and+forward+or+other+toolbar+items+are+missing

HT2506 I'm using Preview with a MacBook Pro and MacOS 10.6.8. When adjusting sharpness in the Adjust Colour tool, images are not saved. Any hint? Thanks.

I'm using Preview with a MacBook Pro and MacOS 10.6.8. When adjusting sharpness in the Adjust Colour tool, images are not saved. Any hint? Thanks.

I too experienced the same issue. Here are my details:
Recently I bought a 15” Macbook Pro and last night I tried to connect and use a Edirol FA/66 Firewire 400 connected outboard audio interface using a Firewire 400 to 800 adapter then connected to a Firewire 800 to Thunderbolt adapter since the MBP doesn’t have a native Firewire port. What I observed is that the Edirol was not getting power from the bus nor did the MBP (running Yosemite) recognize the Edriol. At first I thought there was a problem with the Edirol since I haven’t used it in a while but when I connected it to an older MBP that has a native Firewire port, it worked normally. Is there a known issue with these sorts of external audio interfaces working properly with newer MBP running Yosemite? I’m hoping that a software update will fix this issue.

Help! Images are not rendering in any browser!

When online, images are not rendering on any webpage. All other content is fine. Problem is across browsers, BUT, is limited to my user identity. When I create a new user and go online the problem id resolved. I do not want to lose all my user settings. Can anyone think of something I can do to troubleshoot this. Some file I may have deleted, some setting?

Hi all, I am facing the same problems:
Im using an UMTS card to connect to the internet.
On various pages, no pictures are shown. The reason is, that my mobile carrier is using proxies to compress the pictures. Same thing worked fine, before updating to snow leopard. Now the pictures can show up. Safari says, that the pictures were not found.
I tried the umts card on another computer, it worked fine, so t has to do with the update from Leo to Snow Leo....
I already deleted the .plist, but it didnt solve the issue.
Does anybody has an hint or solution??

HELP! - Things disappear from Indesign files!!! (images, boxes, lines, logos etc)

Things disappear from my indesign files!!!!
Images, boxes, lines logos, other design elemtents will be missing from a page when I open indesign. I restore the same file from time machine yesterday! and all the elements are on the page (it is fine).
The only thing I have done to the file the morning is to copy and paste a line of text from excel on to a different page of the file.
Please help!

Hi P
I have found another indesign file with the same problem!!!!
Its a text box this time!
Luckily its just a spread with a couple of words saying what needs to go on the spread when I come to design it.
See below how it should look
and how it looks now - with the 2 text boxes disappeared
and here's the layers panel - a node appears in the centre of the spread when I click the item in the layers panel

Reader XI has suddenly stopped loading any images in pdf's. Any idea why?

Reader XI has suddenly stopped loading any images in pdf's. Any idea why?

I tried to got to edit to follow the suggestion of ~graffiti I found that the "Show Large Images" was already checked. I since have found that if I download the .pdf file and then open the download everything appears as it should. Previously, when I clicked on the emailed .pdf file it would automatically open without having to download the file. I'm not sure why it is requiring the extra steps of downloading the and then opening the downloaded file before the images with appear. Any ideas why the extra steps are now required?

In Line Items if any duplicate reocords found don't delete

In Line Items if any duplicate reocords found don't delete   catch those records and display in output as Warning message.
PO      line item
123     1
123     2
123     3
123     1
134      1
in the above scenario there are 1 line item duplicate record . I want to catch that and display it as an Error / Warning message and    don't process that record continue to the next PO 134 like that.

The below code works considering the duplicates of both f1 and f2.
if you only require f1.then change the control break statements to f1.
DATA:BEGIN OF itab OCCURS 0,
      f1 TYPE char3,
      f2 TYPE char1,
    END OF itab.
DATA:wa LIKE LINE OF itab.
data:count type i.
wa-f1 = '123'. wa-f2 = '1'.APPEND wa TO itab.
wa-f1 = '123'. wa-f2 = '2'.APPEND wa TO itab.
wa-f1 = '123'. wa-f2 = '3'.APPEND wa TO itab.
wa-f1 = '123'. wa-f2 = '1'.APPEND wa TO itab.
wa-f1 = '134'. wa-f2 = '1'.APPEND wa TO itab.
SORT itab ASCENDING.
LOOP AT itab.
AT NEW f2.
    count = 0.
ENDAT.
ADD 1 TO count.
AT END OF f2.
    READ TABLE itab INTO wa INDEX sy-tabix.
    IF count = 2.
      write: 'E'.
      "move the error records.
    ELSE.
      Write:'S'.
      "Process the records
    ENDIF.
ENDAT.
ENDLOOP.

Pointer turns to 'hand' over image while in editor disallowing any access to tool bar. How do I avoid?

Pointer turns to 'hand' over image while in editor disallowing any access to tool bar. How do I avoid?

Hi,
Verify that the Space bar is not pressed or hung.
Hand tool is activated when we have Space bar pressed. You can use it while working on other tools and you need to move the image up/down. You just need to press Space bar in between and releasing it would return to the initially active tool, you were wrokinf on.
Thanks.

Cant save images from goggle to ipad any more what am I doing wrong pls

CAnt save image from goggle to ipad any more keeps saying save image failed what am I doing wrong pls

If by "goggle" you mean the Google Chrome browser, then make sure its allowed to use the Camera Roll under Settings->Privacy->Photos, and make sure Chrome is turned on there.
If that's not it perhaps explaining in a bit more detail what you are doing, and what happens when you try to save a picture?

Aperture 3.2.4 macbookpro lion: image disappears after loading from any project; repairing everything on starting app doesn't fix it. Only restarting the computer works. Any help, please? ... in non-technical language please. Thanks

aperture 3.2.4, macbookpro lion: image disappears after loading from any project; repairing everything on starting app doesn't fix it. Only restarting the computer works. Any help, please? ... in non-technical language please. Thanks

“Hi Kirby, thanks a lot for your answer.
I got one answer, from DMoore, saying:
“Try Safe boot and then restart with only Aperture open. Still doent work write back with more details like Ram, HD capacity/free space. Are these thumbnails or Previews? Have you turned off building previews in AP preferances?
Safe boot http://support.apple.com/kb/HT1564
Starting up into Safe Mode does several things:
1 It forces a directory check of the startup volume.
2 It loads only required kernel extensions (some of the items in /System/Library/Extensions).
3 In Mac OS X v10.3.9 or earlier, Safe Mode runs only Apple-installed startup items (such items may be installed either in /Library/StartupItems or in /System/Library/StartupItems; these are different than user-selected account login items).
4 It disables all fonts other than those in /System/Library/Fonts (Mac OS X v10.4 or later).
5 It moves to the Trash all font caches normally stored in /Library/Caches/com.apple.ATS/(uid)/ , where (uid) is a user ID number such as 501 (Mac OS X v10.4 or later).
6 It disables all startup items and login items (Mac OS X v10.4 or later).
7 Mac OS X v10.5.6 or later: A Safe Boot deletes the dynamic loader shared cache at (/var/db/dyld/). A cache with issues may cause a blue screen on startup, particularly after a Software Update. Restarting normally recreates this cache.”
As I don’t know much about the technical aspects of computers, I don’t really understand the first answer, and it sounds like following it might produce unwanted changes.
But I understand your questions, so I’ll try to answer them;
"loading from any Project" means that I encounter the problem when I’m using a project, possibly after/because I’ve left the Mac on overnight, and/or I’ve made a lot of adjustments, and, once the problem is there, it happens in any other project which I open – the images load then disappear.
I can see images in the Browser, so it only happens in the Viewer(s).
I’m afraid I don’t understand what you mean by: “If you select "Photos" from near the top of the Library tab of the Inspector, does it show you all of your Images?”. I am a newcomer to Aperture, so I don’t know what some of the buttons are for yet, but when I want to look at and adjust my pictures, I import them, as referenced images, then Aperture creates a folder/project in the Library. When I click on that Project (when it’s working properly), all the images appear in the Browser or the Viewers – without me needing to “select Photos from near the top of the Library tab of the Inspector”. I selected it and looked at all the items in the dropdown menu, but none of them seems to offer the option to ‘show all the images’. So I’m not sure how to answer your question except to say that – yes, I can see all the pictures in the Browser or the Viewers (when it’s working properly), but I don’t seem to need to use the Photos button to achieve this.
Did Aperture work before?
Yes it worked ok for a while, but I only purchased it on 24th May.
If I understand correctly, the difference between thumbnail and preview is that the thumbnail is what I see when the “Loading” wheel is turning, and the disappearance of this wheel after a few seconds means that I am now looking at the preview (also, the thumbnail cannot be adjusted).
So I think the problem occurs when the thumbnail has finished loading; the viewer going blank/grey might mean that it is not showing the preview.
But I have not changed the default Preview settings in Aperture Preferences.
My macbookpro details:
2.7 Ghz Intel Core i7
Memory: 8 Gb 1333 MHz DDR3
Hard Drive capacity 499.25 GB
Available 387.36 GB
I have noticed another problem: I cannot apply the same rating to multiple images: following the instructions, I select a group of contiguous (or non- contiguous) images, choose a selection eg “5stars” using the keyboard, but the stars only appear in the last selected image – even though all the images are still showing as selected.”
I hope this helps you to understand more.
Thank you for trying to help me.
Tony

Image of line , kant do any adjusments ,??

Similar Messages

Maybe you are looking for