Image problems with keynote   dropbox

We are having massive problems with images not appearing correctly in our Keynote when saved via dropbox. Images appear swaped with other images, or at times, completely missing all together. This has completely crippled the work flow at our business and we are at all but a loss other on how we can continue to properly work in Keynote 6. What can be done to remedy this problem?

This is a MASSIVE problem. Keynote autosaves every single small change. With multiple team members on multiple locations it's virtually impossible to know if someone even does 1 tiny change in the presentation, while someone else is doing the same. The autosave makes this almost a certainty to happen.
We had to do multiple reworks this weekend, because of this. It makes working with dropbox and Keynote virtually impossible. I asked around and all Agencies I know, having the same issue.
One change on two locations, even by accident means:
- Broken images
- Broken videos
- Mixed images turning on different locaties
- Mixed videos turning on different locaties
- Keynote versioning broke.
- No dropbox versioning because of the new file format,
Only thing that can save you is a local backup.....OMG!!
It feels like a viral outbreak, and nobody is realising it yet....

Similar Messages

  • Haven't been able to use pages for a while.  Keep getting following message.  Have tried reinstalling iWork, but no luck.  Same problems with Keynote and Numbers/Users/scottmcdonald/Desktop/Screen Shot 2012-03-14 at 9.39.52 PM.png

    Haven't been able to use pages for a while.  Keep getting following message.  Have tried reinstalling iWork, but no luck.  Same problems with Keynote and Numbers/

    Have you moved Pages from its installed location? Or just dragged a copy to your current system?
    It can't find some of its resources apparently.
    Peter

  • Error-1074396120 Not an image, problem with IMAQ Learn multiple geometric patterns

    Error-1074396120 Not an image, problem with IMAQ Learn multiple geometric patterns
    Hi!
    I've tried to modify the example of  "multiple geometric patterns matching" , and just use two patterns, but when I run the VI this error appear and I doon't know how to solve it! , the error appears in the "IMAQ Learn multiple geometric patterns" block.
    Running on:
    - labview 32 bits
    - windows 7 64 bits
    - usb camera 2.0
    Any sugestion would be helpful..... !  Regards
    Attachments:
    template_12.png ‏150 KB
    template_11.png ‏123 KB
    vision_multiple_pattern_matching.vi ‏127 KB

    thanks all for your replies, the problem was on my template images, I had to give them information about the pattern matching, and I did it with NI Vision Template Editor, within Vision utilities, and I chose template with Feature Based. 
    Thank you again and Regards!

  • 10.4.10 image problem with Firefox and Photoshop on Intel and OD AFP server

    We are working on a new client image (perfect client image to deploy with Netboot) and our Intel machines, new and old, are throwing errors in CS2 Photoshop and refusing to launch Firefox when we log in to home folders from the OSXserver, local accounts run OK. The Intel Mac Pros we got last year ran Photoshop fine using last years image. Power Macs are running OK logged in on the server and local. The biggest variable is we are now running 10.4.10, the last image was 10.4.9. Anyone seen this, any thoughts, I have tried everything I can think of.
    Thanks!

    I haven't had any problems with 10.4 and solaris 10. At some point Apple upgraded to some version of OpenSSH that required the addition of the -Y switch to make things work well.

  • Problem with Keynote

    Hello, anyone knows about a problem in Keynote(iWork) that whenever I write with a RTL language, and make "Build" in Inspector, it doesn't not show the whole word or sentence, and sometimes it doesn't show the entire sentence.
    Is this problem solvable?
    Thank you,
    Balig

    All iwork apps have major bugs with RTL scripts and are normally not suitable for using them, unless copy/paste from another app like TextEdit works well enough to meet your needs.    Sometimes different Effects may give better results than others.
    In any case, such problems are not related to your hardware and you should ask in a software forum like
    https://discussions.apple.com/community/iwork/keynote

  • JAI(Java Advanced Imaging) Problem with splitting TIFF images

    Hi
    I am getting problem with height when I use this program to split TIFF images
    ImageDecoder decImage = ImageCodec.createImageDecoder("tiff", inStr,
    null);
    Then it creates RenderedImage page by page and encodes them to file:
    String outFileName = "";
    OutputStream outStr;
    TIFFEncodeParam encParam = new TIFFEncodeParam();
    encParam.setCompression(TIFFEncodeParam.COMPRESSION_PACKBITS);
    for (int i=0,n=this.getPageCount(); i < n; i++)
    outImage = this.decImage.decodeAsRenderedImage(i);
    outFileName = "C:\\Temp\\Split" + i + ".tif";
    outStr = new FileOutputStream(outFileName);
    BufferedOutputStream bOutStr = new BufferedOutputStream(outStr);
    encImage = ImageCodec.createImageEncoder("tiff",bOutStr,encParam);
    encImage.encode(outImage);
    bOutStr.flush();
    bOutStr.close();
    }The images are shrinking when I split . I need a solution to this problem.
    Thanks for any help in advance
    Sudheer.

    Hi
    Did you get a solution for your problem. I am also trying to split a TIFF file.
    Thanks in advance
    Antony

  • Severe problems with Keynote

    Hi there,
    I've got some trouble with keynote (on Ipad)
    What happens: My wife and myself often receive Powerpoint "presentations" from friends or relatives though e-mail, some of them from China.
    These presentations are usually displayed as slideshows, with sophisticated transitions, and of course music.
    It's no problem on a computer.However with Ipad and Keynote, we can't:
    1. listen to voice/music (no sound at all)
    2. Impossible to display the slideshow automatically (pages can only be changed manually...)
    Luckily, Chinese characters are displayed correctly
    I can't find under Keynote's GUI the appropriate tools to solve these issues..
    I'm afraid, I think I could do with a bit of help !
    Many thanks in advance for your help
    FilouZorro

    Hi there, and welcome to Apple discussions,
    I must make sure you are actually viewing the presentation in keynote. In mail, make sure you have tapped "open in keynote", as you can view presentations in mail, just with limited functionality.
    Keynote for iPad does play sound, just it does not very well. When you press play, and move through the slides, wait about 30 seconds for sound, as playback may be delayed.
    To automatically move through slides, you must set times on your iPad. Try, on one of your slides (but not the first) tapping the icon which has 2 squares, one more faded than the other (3rd from the right, top right). The tap the slide you want to move on automatically, tap the blue arrow, and play with the options!
    Hope this helps! Let me know how you get on.
    P.S. If you are using chinese characters, have you tried adding a Chinese keyboard. [Click here to find out how|http://support.apple.com/kb/HT4509]

  • Image problem with my palm (J2ME Wireless Toolkit)

    Hi,
    I did a basic application. I just show an image and it works perfectly with the J2ME Wireless ToolKit.
    However, when I create the package, convert it and send it on my palm, everything is ok, except the image. It won't appair.
    I get an exception that the image couldn't be found, but when I use the emulator, everything is ok !!!
    The image is in the "res" directory, like it was asked in the manual.
    I tought that everything is encoded (text file or image file) when you create the package. If it's working with the emulator, why is it not working on my palm?

    I had a same problem with my nokia 3650 in J2me the image appears but not on the phone, I think that that is a bug and fixed it this way:
    when you make a jar package, unpack package with winRAR or some archive program in some temp directory and in that directory make a res directory an put the image in it, then repack theese files again including the res directory in a new jar file. It works for me. It looks that J2ME in compiling doesn't change the path, to root but leaves the res directory.

  • Image problems with my 6D...diagonal line

    Hello, my name is Lindy and I'm new to this forum. I've been having a problem with my Canon 6D which results in some of my images appearing with a dark diagonal line across the upper left hand corner. I've seen this problem with both my 100mm L lens and my 16-35mm lens. Has anyone had this problem before or have any idea of what may be wrong?
    Thanks!!
    Solved!
    Go to Solution.

    Hi Lindy.  You've got a bit of "dust" on your sensor (only in your case it looks like a tiny hair).  
    It's easily fixed.
    See page 279 of your owner's manual which describges how to clean the sensor.  
    I do, however, recommend that before doing an automatic cleaning cycle, you remove the lens and point it at the ground -- that way this little hair has someplace to go when it falls... other than finding itself another location inside your camera.
    After cleaning, poing the camera a plain white wall (or ceiling) and snap a photo (it doesn't even have to be in focus).  The dust shows up better at high f-stops (it'll be fuzzier at low f-stops).
    Sometimes automatic cleaning is not enough and you have to do something further.  If that's the case, then see page 283 for "manual sensor cleaning".  This simply causes the camera to power down the sensor, but open the shutter (and hold it open) so that you can inspect and clean it.  If you look inside, what you're REALLY seeing are the two filters in front of the sensor.  The front filter is the one that vibrates (using a piezoelectric effect) to "shake" dust loose.  
    I use a variety of techniques... the simplest and safest is to use a simple hand-squeeze (bulb) blower such as a Giottos Rocket Blower.  I recommend you not use cans of compressed air because the liquid propellant in the cans can spray out if the can is either shaken or not held perfectly level and that leaves a residue on the filter (and the only way to get that off is to wet-clean the filter).  Even air-compressors spray water and oil.  A hand-squeezed blower is the safest option.
    If that doesn't work, I use an extremely soft small paintbrush.  They actually do make brushes that plug in to release any static charge so that if something is sticking because of static cling it will hopefully release.
    If that doesn't work, I use a sensor scope to inspect my sensor and get a better understanding of why it still wont come free (because generally it would have by now) and then wet-clean the sensor using Photographic Solutions brand "Sensor Swabs" and "Eclipse" cleaning solution.  The solution is nearly pure methenol which means it evaporates very quickly and leaves no residue behind.
    My guess is a simple manual cleaning (with camera pointing at the ground) -or- a hand-squeezed blower will likely do the trick.  If you do resort to a brush, give that brush a couple of good solid whacks on the edge of a desk or table to throw off any dust that could be on the brush -- as you don't want to add dust on to the sensor as you are trying to brush that hair away.
    Most "real" camera stores (stores in business primarily to sell and service camera gear -- not big box stores that also happen to sell cameras) offer sensor cleaning, but usually there's a charge associated with that.  It's fairly easy to learn to clean the sensor (which is why Canon has a section in the owner's manual) and it's something photographers have to do.... just occasionally.
    Tim Campbell
    5D II, 5D III, 60Da

  • Is anyone having problems with keynote after upgrading to Lion?

    After upgrading my system to Lion, my keynote presentations are becoming a nightmare. They crash all the time, and are becoming significantly slower, not just due to the autosave but after making just a few movements the beach ball appears and takes forever for me to be able to edit the document again. When I try to put into presentation mode the computer stops, sometimes I even lost the images inside the saved prasentation, and when I tried to recover from the auto saved versions, they were corrupted also. I talked to the apple support here in Brazil and after running all kinds procedures to check and fix the disk and hardware even in the safe mode, it still remained with the same problem. Another suggestion was to reinstall the keynote, and I even bought a new version from the app store even though the old one was updated. Again, nothing changed. Does anyone have the same problem or knows what to do?

    Hi Thomas - listen, I want to tell you that we aren't necessarily all in the same boat...what I mean is that this problem almost ruined my business and I spent a long time reading the dozen or so threads in this board, and tried solutions people suggested in each one. I had two separate problems...the first was like yours, and it was indeed solved by the time machine save setting mentioned above. The other was that I couldn't get an object selected with a click of the mouse every tenth time or so...I had to click onto a different slide and then come back to mine. I started turning off every single piece of hardware and software one by one, in search of a conflict. It turns out that my Apple Magic Mouse was the problem. I switched it to a plain MS wireless mouse and problem solved. *****, but it let's me continue. My point is that too many people are using Keynote just fine for any of us to throw in the towel and say it's universally and irreversibly broken. There are different bugs in play, but you have to go on the assumption that there's a way out if you can spot what's not quite right. Sorry I don't have your specific solution, but this mindset is what saved me from jumping ship to PPT.

  • Printing problems with keynote

    Is it possible, when printing six slides on one page for the slides to be in two columns instead of one?  I know this can be done with PowerPoint, can it also be done with Keynote

    Not directly in Keynote, but there is a work around:
    1. Create a blank page in Pages and open your Keynote adjacent to it then drag (from the slide navigator in Keynote)  and size 6 of the first slides on the blank so the layout looks good for you
    2. Select the six slide images on the Pages document and Format > Advanced > Make Images Place Holders
    3. Save the Pages document as a template and when ever you need a handout, create a new document with the template and drag the slides ( from the Slide Navigator) into the place holders.
    4. Duplicate the page in Pages (clone it by Option-Dragging in the Thumbnail view in Pages) to create additional pages.
    Note: you can add page numbers and headers/footers on your handouts on the Pages Template if you like. You can also create dummy text to add notes or slide titles as needed.
    Hope this helps.

  • Projection problems with KEYNOTE

    I am an orthodontist and do many lectures showing pictures of faces and teeth.
    I moved to Mac 2 years ago and I love Keynote BUT when I project the pictures the quality is significantly inferior to the identical slide projected through the same projector with the same cable using powerpoint.
    The quality is also nowhere near the quality seen on my computer.
    Do I need to buy a Belkin HDMI to DVI cable - I would love to do this if it will help?
    Do I need to buy a Dell 5100MP projector with HDMI input - again happy so to do...
    I just want to maximise the quality of the output, irrespective of cost...
    Please help

    Not that your problem is related to doing dental presentations, but there are at least 2 people who specialize in helping presenters of dental information: James Cowherd in Las Vegas and Greg Lutke in Dallas. Greg may not have as much knowledge about Keynote as James, but both are great guys. Contact info should be easily accessible through google.
    Corky

  • Safari load image problem with iMac Intel core

    I got my new iMac 20" Intel core and system updated everything. I found that Safari cannot load image in my web photo album ( http://fotop.net/nicknick ), all image became "?".
    I can load this page correctly with FireFox and Opera Browser. I also try the iMac 17" PowerPC in my office with the latest version Safari, it also load the album correctly. And I know this web is created and store in a Linux server, the web page coding not written or optimized to IE.
    I've try to reinstall the whole OS X, nothing else installed, the same problem occurred.
    Is it the problem on Intel core? or any setting I can do to overcome it?
    Hope the problem could be solve, I like to use Safari except this problem.
    iMac 20" Intel core   Mac OS X (10.4.5)  

    Well... no - except to ask if your intel imac is connected to the internet in exactly the same way as the ppc imac. If it is, then that's puzzling
    You're right, I'm puzzled by the imac.
    Intel imac is at my home, ppc imac is at my office;
    both using same ISP but different service plan,
    (home:) PPPoE, ADSL modem -> buffalo MIMO wireless router -> intel imac (both direct wire or wireless connect have same result)
    (office:) fixed-ip, ADSL modem -> firewall -> Linksys wireless router -> ppc imac (wireless)
    both network setting with manual assigned IP, gateway and same DNS
    Same result occurred when (1)open box new machine, (2)after updated system, (3)reinstall whole OS with preserve the old setting, (4)reinstall whole OS with erase the whole harddisk option, (5)updated system after the reinstallation.
    I firstly think may be some security setting in imac that blocked the images, but can't found out. I secondly think some html code at this web not work on Safari.
    May someone with same machine help to open this web to see if all intel imac get the same result?

  • Having an image problem with Photoshop cs4.

    Sorry if this is in the wrong place. Anyway, my problem is when i open CS4 and either open a picture or start a new image, the image has annoying black lines on it which distort anything i do, kinda like a broken touchscreen.
    I have some images here to show what i mean.
    http://i143.photobucket.com/albums/r130/Tsuikai/annoyingphotoshopproblem.jpg
    http://i143.photobucket.com/albums/r130/Tsuikai/annoyingphotoshopproblem2.jpg
    Now, i've tried updating my graphic drivers, resetting the tools and opening other image files, it's the same with anything i open, even if i start a new. I can't figure out what's wrong with it.
    Anyone able to help?

    Hello, Nazaruda. This is the forum for Photoshop Elements, the consumer version of Photoshop. Since you have CS4, you would probably get better help in the Photoshop forum:
    http://forums.adobe.com/community/photoshop/photoshop_windows
    Good luck!

  • Image problems with VS2005 & CR 10.2

    Hi,
    I've searched & read the forum but not found any replies that match my problem, please help!
    I've got a field in an Oracle database that contains an image in binary form (Oracle type BLOB).
    In my VS2005 (ASP.Net using VB) website I return this field (along with others) at runtime into a dataset which I load into a report I've created.
    All the fields in the dataset show except for the image field.  I just get the "red cross".
    I know the image is ok because it is used elsewhere in an Oracle Forms project.
    I've also got the relative path to a physical copy of the image stored on the server - is there anyway this can be used to dynamically load the image using this version or CR (10.2, the one bundled with VS2005)?
    I've tried running the application locally as well as deploying it to our server - both fail and just show the "red cross"
    Any ideas please?
    Thanks,
    Ted H

    Start with the latest SP for that version of CR. That can be downloaded from here:
    https://smpdl.sap-ag.de/~sapidp/012002523100006007872008E/crvs05sp1.exe
    Since I do not have the same data structure as you, it is difficult to say if any version of CR supports it. I did have a look at our known issues database, but do not see anything there similar to your issue.
    You may want to test with the latest version of CR - CR 2008. Eval version can be downloaded from here;
    http://www.businessobjects.com/forms/default.asp?id=701600000009BXP
    The testing I'd recommend:
    1) Once you have downloaded CR 2008, create a new report and connect to the Oracle database. Throw the blob field on the report and see if it comes up. If it does, move to test (2) below. If it does not, post a query to the Report Design forum as to why not. The report design forum link is here:
    SAP Crystal Reports
    2) Create a simple (I'd recommend win app), load the report, cerate a dataset  that contains the blob, pass that to the report and see if you can see the blob.
    Ludek

Maybe you are looking for