Image Quality Issues from FCE to iDVD

I've been attempting to take a 16 minute video shot in DV to a DVD and have been disappointed with the results. Using Final Cut Express, I've tried every codec but have found the image quality to be quite a bit less than the original DV footage. Also having a difficult time retaining the original 4:3 aspect ratio of the footage, despite specifying NTSC 4:3. When converting the footage to a Quicktime movie, the quality of the movie appears fine when played back on the Mac, but degraded when the final DVD is burned. Haven't used iDVD much, so the issue may lie there, but it's hard for me to believe that such a relatively small amount of footage would require so much compression that the final DVD image would show this much degradation from the DV footage.
Is there some magic combination of codec and size that I'm missing when converting to Quicktime?

Your FCE Easy Set should be DV NTSC.
Your FCE Sequence Settings should also be DV NTSC.
Export a QuickTime Movie using Current Settings, Self Contained.
Bring that file into iDVD where it will be converted internally to MPEG 2.

Similar Messages

Poor quality of from FCE to idvd

Hello All,
We have used iDVD to burn our fce projects. This week we burned a reunion filmed mainly in doors. On FCE the footage looked fine as well as after exporting to QuickTime. Once burned on iDVD and played on a HD tv, the picture is extremely grainy. We switched the tv to standard screen which helps a little, but overall the quality is poor. Even the type on the chapter titles looks blurry. I tried changing the encoding preferences (in iDVD) to professional quality, but couldn't see much difference.
The original footage was filmed in hd and captured at 29.97 fps and hdv-apple intermediate codec 1080i60.
Any advice would be great.
Gobble Gobble,
Jamie

Jamie,
Please provide a little more information.
1) How long is your movie, that is what is the play time?
2) How did you get the movie to iDVD? The best way is to export the movie from FCE as a Quicktime Movie (not Quicktime Conversion). The close FCE and then open iDVD and then go get your movie from with in iDVD.
Also, I hope you realize you had HD material, but iDVD is Standard Definition. How good it looks depends a lot on how well your TV and your DVD player upscale.

Bizarre Lightroom image quality issue

I have a weird image quality issue with Lightroom, when opening RAW files (haven't tried it with any other file format, admittedly).
Here's an example of how the image appears in Lightroom. As an experiment, I exported the image as a TIFF and opened it in Gimp to see if it was just down to a display issue, but the exported TIFF showed the same quality issues as Lightroom. Aside from exporting as a TIFF (and then saving as a Jpeg), this image is SOOC:
<a href="http://www.flickr.com/photos/swisstony10/4912360565/" title="IMG_4134 by swisstony10, on Flickr"><img src="http://farm5.static.flickr.com/4093/4912360565_5891c0160f.jpg" width="333" height="500" alt="IMG_4134" /></a>
If I open the same image in Canon's own DPP software, this image quality issue does not occur, so I know that it's not an issue with the memory card, the camera, or my laptop's monitor. The SOOC image from DPP (exported as a Jpeg) looks like this:
<a href="http://www.flickr.com/photos/swisstony10/4912362053/" title="IMG_4134b by swisstony10, on Flickr"><img src="http://farm5.static.flickr.com/4116/4912362053_1ca92078c9.jpg" width="333" height="500" alt="IMG_4134b" /></a>
Has anybody else experienced this, and if so, is there a fix? (there had better be - I'm not going to be overly chuffed if my expensive Adobe software is being outperformed by the free stuff.. )
Russ.

This is proving to be an extremely helpful forum!
Thanks for the advice on embedding my calibrated colour space - I don't very often send files anywhere other than my own home network (where all the monitors are calibrated), and when I do upload any to Flickr, it's never caused a problem in the past (and if I get anything printed by a lab, I use their ICC profile). I'll definitely keep that all in mind though..
Here's the original RAW file of the image I used as the example https://www.yousendit.com/download/aHlUa3ZONmNFd2Z2Wmc9PQ - I hope that helps someone to shed some light on what's going wrong. From what you've said though, it does look as if this is just an extreme example of something that Lightroom isn't very good at doing.
As I said in my original post, it'll be a bit disappointing if that's the case though, because a fair amount of the pictures I take tend to be of bands playing in what are, let's face it, diabolical conditions for photography. (At the festival I was attending at the weekend for example, all of the photographers - even the seasoned pros - were moaning about how awful the lighting was in the Big Top, and how much it sucked to try and get a decent picture there, as opposed to the main stage where everybody wasn't completely backlit by either red or purple lights. I appreciate that Lightroom is a much more powerful tool than Canon's DPP - the noise reduction controls on their own completely rock - but I must admit I'm a bit surprised that it can't handle highlights terribly well...

Exporting From FCE to IDVD With Chapters How long

Exporting From FCE to IDVD With Chapters How long will the DVD hold??? if i have an hour and 40 minutes of HD footage all cut together with FCE and has been saved as a movie file, how many hours will IDVD let me burn to it?
if i run over the allowed amount will it say i need to drop quality, i am editing loads at the moment and dont want to get to the end and it come up with an error message. also will idvd include the chapter markers if i export with them?

Sure, no problem.
1. Go to Project > Project Info in iDVD.
2. Make sure "DVD Type" is set to a single-layer DVD.
3. Under "Encoding," choose "Best Performance." Is the arrow solidly in the green portion of the quality bar? If so, go ahead and burn your disc.
4. If not, choose "High Quality." Again, go ahead and burn your disc if the arrow is solidly in the green.
3. If the arrow still isn't in the green, select Professional Quality. If the arrow's in the green, burn your disc. If not, you'll have to delete some of the menus (scene selection, etc.) or menu content and check again. You should be able to burn up to 2 hours if you don't have a lot of other menu content.

Image quality issues in PS - word to PDF

Hi,
I am having major image quality issues when trying to make my word document a clean, clear PDF. Images become distorted. Borders for tables and text that are equal px size look like they are different sizes throughout the document.
I have searched the internet, read help, and tried many different things:
Word 2007 - Changed image %, image size, export options, adjusted px for borders, used different styles
Acrobat 9 Pro - Changed import settings, import options, print options, tried press quality, high quality, etc.
Photoshop CS4 - Changed ppx, file format, compression options
What can I do to get a clean, clear PDF file with the images and borders preserved?
Thank you.

In converting a MS Office file to PDF, Photoshop cannot help in any way and will likely cause more harm as it may rasterize vector data. Expect your ideal answer in the Acrobat forum.

Image Quality issue with script

So I recently wrote a simple script to output an image at a bunch of different resolutions. However, I am running into an image quality issue that I don't run into when I do the same thing manually.
Here is an example image showcasing the image: http://terminalvelocity.ca/temp/notworking.jpg
As you can see along the top of the model's forhead there is destinct color fragmentation. Which seems very strange.
Here is the script, it is pretty simple, it asks for a few simple config options. (the above image was created using default settings). It then figures out the correct ratios and loops through doing each resize, saving the image, then reverting the history so each iteration uses the original image data and not the resized version:
doc = app.activeDocument;
openFilePath = Folder.selectDialog ("Where do you want the images to be saved?");
maxSize = Number(prompt("What would you like to be the maximum length of the long edge? (Image is never upsized) (pixels)", 2800));
minSize = Number(prompt("What would you like to be the minimum length of the long edge? (pixels)", 100));
gap = Number(prompt("How much smaller should each image be? (pixels)", 100));
quality = Number(prompt("What quality would you like the JPG exported as (0-12)", 10));
var size;
var primary;
var secondary;
if(doc.width > doc.height){
          primary = doc.width;
          secondary = doc.height;
}else{
          primary = doc.height;
          secondary = doc.width;
var ratio = secondary/primary;
var size = [];
for(var i = maxSize;i>minSize;i-=gap){
          var p = i
          var s = i * ratio;
          size.push([p,s]);
var w;
var h;
var n;
for(var i in size){
          if(doc.width > doc.height){
                    w = n = size[i][0];
                    h = size[i][1];
          }else{
                    w = size[i][1];
                    n= h = size[i][0];
          if(doc.width >= w && doc.height >= h){
                    doc.resizeImage(w,h,null,ResampleMethod.BICUBICSHARPER);
                    jpgFile = new File(openFilePath+"/"+n+".jpeg" )
                    jpgSaveOptions = new JPEGSaveOptions()
                    jpgSaveOptions.embedColorProfile = false
                    jpgSaveOptions.formatOptions =
                    FormatOptions.STANDARDBASELINE
                    jpgSaveOptions.matte = MatteType.NONE
                    jpgSaveOptions.quality = quality
                    app.activeDocument.saveAs(jpgFile, jpgSaveOptions, true,Extension.LOWERCASE);
                    doc.activeHistoryState = doc.historyStates[doc.historyStates.length-2];
In comparison, here is an example of an image of the exact same resolution that does not exhibit this issue at all:
The steps taken to save this image were as follows: http://photography.terminalvelocity.ca/content/images/2012/avery_konrad_6/horizontal/1500. jpg
Image > Resize > Bicubic Sharper (1500px);
Save For Web
     Jpeg
     Quality 75
     Optimzed: true
     Progressive: false
     Blur: 0
     Convert to sRGB: true
Anyway, as you can see, The manually exported image does not have any of the quality issues that are present within the scripted image. I am pretty new to photoshop scriping so am assuming it has something to do with me missing some sort of option in the save settings. Any help would be swell.
Also note, this doesn't occur on all images, I usually don't see an issue when using the script, however, something about the tones of this particular photo make it really obvious.
I am using the latest version of Photoshop CS6 (creative cloud) on Max OSX
thanks so much!

I'm on windows find the bicubicsharper does not work well it the image being resized has been highly sharpened all ready. Because of my Photoshop preferences I had to make minor modification to your script. I'm also a bit colorblind so i don't see many color issues so I include a screen capture if what windows does with your image and script.
var orig_ruler_units = app.preferences.rulerUnits;
app.preferences.rulerUnits = Units.PIXELS;          // Set the ruler units to PIXELS
doc = app.activeDocument;
openFilePath = Folder.selectDialog ("Where do you want the images to be saved?");
maxSize = Number(prompt("What would you like to be the maximum length of the long edge? (Image is never upsized) (pixels)", 2800));
minSize = Number(prompt("What would you like to be the minimum length of the long edge? (pixels)", 100));
gap = Number(prompt("How much smaller should each image be? (pixels)", 100));
quality = Number(prompt("What quality would you like the JPG exported as (0-12)", 10));
var size;
var primary;
var secondary;
if(doc.width > doc.height){
          primary = doc.width;
          secondary = doc.height;
}else{
          primary = doc.height;
          secondary = doc.width;
var ratio = secondary/primary;
var size = [];
for(var i = maxSize;i>minSize;i-=gap){
          var p = i
          var s = i * ratio;
          size.push([p,s]);
var w;
var h;
var n;
for(var i in size){
          if(doc.width > doc.height){
                    w = n = size[i][0];
                    h = size[i][1];
          }else{
                    w = size[i][1];
                    n= h = size[i][0];
          if(doc.width.value >= w && doc.height.value >= h){
                    doc.resizeImage(w,h,null,ResampleMethod.BICUBICSHARPER);
                    jpgFile = new File(openFilePath+"/"+n+".jpeg" )
                    jpgSaveOptions = new JPEGSaveOptions()
                    jpgSaveOptions.embedColorProfile = false
                    jpgSaveOptions.formatOptions =
                    FormatOptions.STANDARDBASELINE
                    jpgSaveOptions.matte = MatteType.NONE
                    jpgSaveOptions.quality = quality
                    app.activeDocument.saveAs(jpgFile, jpgSaveOptions, true,Extension.LOWERCASE);
                    doc.activeHistoryState = doc.historyStates[doc.historyStates.length-2];
app.preferences.rulerUnits = orig_ruler_units;          // Reset units to original settings

Image quality issues - Sony Handycam (MPEG) to iMovie / iDVD

I have read through dozens of posts but the recommendations vary widely and am hoping I can get some guidance specific to my situation. The image quality I am getting from home movies I edit in iMovie11 and burn to DVD in iDVD are far inferior to the original material.
I have a Sony DCR-TRV17. This camera is a little over 10 years old. It is a miniDV with 500 lines resolution, 680K gross pixels and uses MPEG. While not HD, the image quality is exceptional. The DVDs I used to create using my Sony Viao likewise looked fantastic. But the results I get from iMovie and iDVD are on par with VHS -- very poor, especially in low-light.
I hope the issue is just the settings when I import, edit (iMovie) and share to iDVD. I generally use the default settings, and often alternate settings don't seem to be selectable. It also sounds from other posts like iMovie sacrifices quality for reduced file size and increased simplicity? I would appreciate help with the following:
1) Please list the settings I should be adjusting from default when I a) import, b) edit in iMovie11 and c) share to iDVD and burn -- and the recommended settings for each
2) Is there a process I should be trying? Should I be creating test DVDs using different settings at each stage and then reviewing various setting combinations to find the best one?
3) I will most probably buy an HD camcorder very soon, and plan to burn to Blue Rays. I have no problem with going ahead and buying Final Cut and an external drive to burn Blue Rays. Should I just go ahead and do it and get away from iMovie / iDVD entirely. Will Final Cut solve this issue for my old miniDVs without a whole lot of hair pulling? Or will I still have to tinker with a bunch of settings or convoluted processes to get it "right." I never had to tinker with settings on my Viao. Really expected Mac software to be more user friendly…
Thanks very much for any help or advice!

On Import you could try unchecking Optimize video and choose Full Size. Your disk space however will get eaten up incredibly quickly choosing these settings as each hour of video = 40GBytes of disk space. So be forewarned about how big those files will expand as they come off the MiniDV tapes.
Another thing you will immediately see a difference in is how you move files from iMovie to iDVD. Share to iDVD while named in an intuitive way, is NOT the best way to get good quality DVDs out of iMovie. Instead you want to Share to Media Browser. Choose the Large Size setting. Then quit iMovie. Open iDVD, click the Media button, the Movies button. Find your project listed under the iMovie star icon and drag it into the iDVD project. Burn the Disc and see if you get a higher quality disk by Sharing to Media Browser instead of Share to iDVD.
If you choose a Blu-Ray burner, also get a copy of Roxio Toast. The encoding to Blu-ray that Toast provides will be top notch and prevent you from making mistakes as the recordable Blu-ray disks are more expensive than DVDs. So every mistake will be expensive.

Interlace issues from 1080i50 to - iDVD, PS3, Apple TV and even FCE canvas

Hello all,
I am struggling to get smooth output from my FCE, interlace is thwarting me at every turn. I can produce a smooth DVD but at low quality with a work around as described at end of post, but really want smooth HD file, here is my workflow an plight
Have captured footage with Panasonic HDC-SD5 AVCHD camcorder in 1920 x 1080i50, imported into FCE with the newer 1920x1080 apple intermediate codec at 25fps
On inspection in the canvas set to 100% I see interlace jaggies, play back is not smooth either. So this is the first question should I really interlace in the canvas at this point?
Export to iDVD, use Quicktime Movie export, import into iDVD and produce DVD - result awful not smooth and blurred.
So try to export a HD MP4 , using Quicktime conversion. I produced in 1080i at 25fps and it's jumpy and blurred on the PS3 in playback. Then I did one at 29.97fps and as expected the video jumped every second BUT there were periods of smooth HD playback so I was so close! But just could not find the correct export setting.
Export to Apple TV directly from FCE produce awful results, however if I use the Quicktime movie and run it through visual hub I can encode for Apple TV using H.264 it de-interlaces correctly but movei not smooth (so it just removes a frame)
So, over a period of 2 days I have tried seemingly every export in Quicktime conversion for PS3 and Apple TV, VisualHub conversions and MPEG StreamClip all producing blurred or jumpy results due to interlacing.
The only smooth output was achived by using technique of another poster
Export Quicktime Movie and use Mpeg_StreamClip exportthat movie in
DVPRO50, set to PAL and 16:9, no deinterlace
then take movie and drop into iDVD and resulting DVD is Smooth
BUT quality is poor.
So, the main question is
How do I get all my nice HD footage out of FCE and onto Apple TV, PS3 or even iDVD in quality and without interlace making it jumpy or jaggy.
Any help would be greatly appreciated.
Cheers
Andy.

Wow thanks for quick reply. Apologies I didn't give full info.
I am viewing DVD on TV - well a plasma being played via DVD on PS3.
BUT, DVPRO50 is the only output that shows a "smooth" movie, if I playback on the canvas at 50% the interlace line are gone due to the scaling BUT the movie plays jumpy, so the DVPRo50 method is the only way I can get a smooth pan for example, every other method just gives a jumpy playback on DVD.
iDVD is set to Production quality, when I do a QT movie direct to iDVD without the DVPRO50, the quality is better but the movie is jumpy.
The movie is also 47 minutes long - it's quite big, file produced is about 19GB.
Also I understand about getting HD quality and BlueRay disk etc, but I would expect to get DVD quality from iDVD, doing the DVPRO50 conversion makes it pretty bad. but smooth!
As I said the anooying things is when I exported to MP4 on quicktime at 1080 HD and 18000kbps and 29.97 it also plays smooth for a short bursts of a few seconds (albeit jumping every second to 25 -> 29.97 issues), in 25 fps it's just blurry and jumpy. (playback on PS3)
Thanks

Poor image quality using iMovie 8 or iDVD after importing DV file via FW

Hello,
i am a complete newby and asking for help. I have bought a Panasonic NV-GS320EG-S miniDV Camcorder. First i connected it via S-Video to my Pioneer Plasma which worked fine.
I have connected the camcorder via Firewire to my iMac 20/2,4 GHz, camcorder will launch import window, streaming works but in iMovie the image quality is already rather poor. I can cut files and all but after using Import film and burning it with latest Toast, picture quality is even worse, that means colors are natural but no sharpness, lots of shivering lines as soon as the angle is moving.
I've tried to import directly into iDVD with the direct transfer function for Firewire which works technically as well but the result is mainly the same, when i burn the DVD the picture quality gets far worse than via S-Video connection.
Last thing i tried is importing to iMovie, importing for media browser and reopening file in iDVD which burns the DVD later, all that works technically fine, but the image result remains absolutely poor, my wife meant inacceptable...
Any ideas what that could be??? I've always imported and exported the film with the largest picture mode possible...

I am using the Panasonic HDC-SD5 camcorder which records in AVCHD.
I also have a JVC miniDV camcorder.
The following is available in iMovie 08 help:If the larger sizes are not available, the original project media isn’t large enough to render in that size. The largest media size used in the project determines the final movie sizes you can render.
Tiny: Always 176 by 144 pixels.
Mobile: Always 480 by 272 pixels.
Medium: Varies in size from 640 by 480 pixels (standard aspect ratio) to 640 by 360 pixels (widescreen), depending on the size of the media in your project.
Large: Always 960 by 540 pixels (widescreen). No large size is rendered if your original video isn’t high definition (HD).

IMovie 11 - Image quality issues / aperture thumbnails

I'm importing images from my Aperture library into iMovie but for some reason the images are of a lesser quality than the original file.
I've tried importing it directly using the Aperture preview panel on the right side of the iMovie screen, I have also tried to drag it from Aperture but both methods produce really bad quality images once imported. I right clicked on the clip after importing so that it would show me the file in Finder and it seems that they are referencing Aperture thumbnails which explains the quality. Why is iMovie doing this? Its useless if its going to use my thumbnails, I want my full images in HD!
I did try to drag a drop from Finder to iMovie which seems to solve the problem although I still believe there is some quality loss its not as bad as it is using thumbnails. This is definitely not an easy process!!
Am I doing something wrong here? It just seems silly that iMovie can't import an image with the original quality if it then is going to make an HD video.

On Import you could try unchecking Optimize video and choose Full Size. Your disk space however will get eaten up incredibly quickly choosing these settings as each hour of video = 40GBytes of disk space. So be forewarned about how big those files will expand as they come off the MiniDV tapes.
Another thing you will immediately see a difference in is how you move files from iMovie to iDVD. Share to iDVD while named in an intuitive way, is NOT the best way to get good quality DVDs out of iMovie. Instead you want to Share to Media Browser. Choose the Large Size setting. Then quit iMovie. Open iDVD, click the Media button, the Movies button. Find your project listed under the iMovie star icon and drag it into the iDVD project. Burn the Disc and see if you get a higher quality disk by Sharing to Media Browser instead of Share to iDVD.
If you choose a Blu-Ray burner, also get a copy of Roxio Toast. The encoding to Blu-ray that Toast provides will be top notch and prevent you from making mistakes as the recordable Blu-ray disks are more expensive than DVDs. So every mistake will be expensive.

Export from FCE to iDVD, results in black border around movie

Here is the problem....
I have edited a movie in FCE where all of the footage is 1440 x 1080
I export it using: File -> Export... QuickTime movie
I choose "self contained" movie and "audio/video", plus "chapter markers" in the pop up menu.
I then take this into iDVD amd all looks ok in the preview, but once burnt to DVD, there is a large black border around the entire movie. It is almost like it is a smaller movie which does not fill the screen correctly.
Any idea why this happens and how to overcome this. When I lok at the exported movie from FCE- it is 720-x576 and not the full size- is this the problem?
Thanks for any tips.

Hi
Is it widescreen ?
Did You in Your browser window set sequence and material to anamorphous. To me it was a revelation that the Browser window was exstendably to the right with lot's of columns - and one of them was Anamorphous.
Did you start a WideScreen project in iDVD - First window that opens after You clicked Start a New iDVD project (top button). At bottom this new window You set 4:3 (SD format) or 16:9 for WideScreen.
In iDVD You also need to go up to Project and down to Projectinfo
then set 16:9 here TOOO !
Proportion - Change it to 16:9
When I go from FinalCut to iDVD - I do
FCE/P to iDVD
Several things
• How to go from FCE/P to iDVD
• Free space on Start-up hard disk
• Encoding
• Brand and type of DVDs used
• Burn speed set
• iDVD BUG
• Chapters
How to go from FCE/P to iDVD I do
• Disable Screen and Energy saver
• IMPORTANT --> FIRST in FinalCut - Mix Down Audio under Sequence Menu / Render Only / Mix-down
• Export out as a QuickTime .mov file
• Select with Mark - Chapter Mark
• Not as Self-Contained (not important but saves time and space)
• NO QUICKTIME CONVERSION (IMPORTANT)
This QT.mov file I import into iDVD from within iDVD.
Free space on Start-up hard disk
I set a minimum of 25GB (for Mac OS and iDVDs temp files)
Encoding
• I use Pro Quality encoding
Brand and type of DVDs used ( Important as cheap brands DO NOT WORK )
• I use Verbatim
• I use DVD-R
Burn speed set (IMPORTANT)
• I set down this to x4 (or x1)
iDVD BUG
• One can not go back to movie-project for any alterations and then go back to
the iDVD project. It will notice and ask You to either Up-date or Cancel. Neither
of them will work.
Medicine - Start a brand new iDVD project.
Use of Chapters
• I only use a to z and 0 to 9 in naming them. NO other symbol/letter !
• NO Chapter-mark at very beginning - iDVD NEEDS TO set this by it self
• No Chapter marks in or within two seconds from a transition
(Way around this last one - Export movie as QT full quality and NO Chapter marks
Import this into a new Movie-project and now You are free to set C-Ms where You want
them except at very beginning - still)
Material used to build movie
• video - I use streamingDV (or convert all other to this e.g. .mp4, .avi, .wmv etc)
• audio - I use .aiff 16-bit 48kHz or from Audio-CD (44.1kHz) - no .mp3 or direct from iTunes
• photos - I use .jpg - no .bmp etc
Problems - then Trash iDVD pref. file and run Repair Permissions - and have a re-try.
from post ??
May not be relevant, but I had the same problem with iDVD, where burned DVDs showed a green screen. It was cured by quitting Quicksilver and Quickeys as well as disabling sleep and screen-saving
Yours Bengt W

Image quality issue in ACR

Hi, Can anyone help me?
I have been using ACR for a while now as a professional photographer, however I have recently started using Alamy picture library. They rejected all my submissions on quality grounds, as they 'lacked definition'. In consulation with another photographer, we have tracked the problem to ACR; the images appear perfect on his mac, and they also appear perfect on mine when I use the Nikon Software. The same quality issue appears in lightroom as well, therefore it is Adobe related. The Sharpening settings are as per ACR default.
I am using CS3 and ACR 4.6; Some have suggested upgrading to CS5, however surely I shouldnt need to do this, as the Nikon D3 was brought out before I started using CS3, so it should work?
Please please any help would be appreciated as this problem is driving me insane; I currently have to open all of my RAW files in the Nikon software and save as TIFF to then open in CS3, rather than using the more simple and logical workflow.
Thanks,
Rob

Click the little fly-out menu icon at the upper-right and choose Save New Camera Raw Defaults.
But be careful, any setting you have changed from default will be saved, so you could inadvertently save a particular color balance setting (instead of As Shot) for example, and that wouldn't be good.
mijbil250456 wrote:
I am using CS3 and ACR 4.6; Some have suggested upgrading to CS5, however surely I shouldnt need to do this, as the Nikon D3 was brought out before I started using CS3, so it should work?
One thing I'd like to add that goes to this comment that you made in the original post: There's not just one result that can be made from a raw file. The quality of conversion results is continunuing to improve as Adobe refines their algorithms and more powerful computers are being built to run them.
The quality of conversions of the very same raw files from Photoshop CS5, using the PV2010 conversion process can indeed be superior to that from Photoshop CS3.
In turn, the quality of conversions from Photoshop CS6 can be better than that of conversions from Photoshop CS5.
We are seeing real improvements to this technology before our very eyes.
-Noel

Exporting from FCE to iDVD

No matter what I do iDVD 09 quits with a "iDVD unexpectedly quit . . " message after exporting from FCE.
The movie has 12 chapters and includes chapter markers.
I have tried to rename file, repair permissions, delete plist prefs, save as disk image, have plenty of hard disk space but all with same result.
Any suggestions?
Doug

Hi Michel,
Here is what I did (and settings)
FCE 4.0.1
Mac OS X 10.5.8
QuickTime Player 7.6.2 (518)
Format: .mov
No Itunes purchased. Just converted one or 2 mp3s to .aiff format
Export settings from FCE:
Export: as Quicktime Movie
Include: Audio and Video
Markers: Chapter Markers
Make Movie self-contained: unchecked
Thanks!
Doug
All media stored on external hard drive but when I burn DVD I bring .mov file
onto my desktop.
Using standard DVD R disks from Staples

Flash in Premiere Elements Image Quality issue

Hello,
I've decided now that I am going to create animated films in Flash and then edit them in Premiere Elements. the problem is, is that when I export it from Flash to Premiere Elements the Image quality is detiereoreted (i.e fuzzy, blurry, out of focus, general ugly to look at). I first realised that I couldnt use an swf file in Premiere and isntead I should use an AVI. So I did. Problem is I'm still having the same problem. the Image quality is still terrible and doesn't equal up to the origonal image quality. And then tried Uncompressing it and all that did is make the video clip jump over about 80 frames and still the image quality is terrible. Is their one little thing that I'm doing wrong or Am I altogether not getting this right.
Programs I'm using:
Macromedia Flash MX 2004
Adobe Premiere Elements 3.0
Adobe Premiere Elements 7.0 (currently not working)

The MS DV CODEC should be installed on your system already. Whether Flash can Export to it could still be an issue. I'll have to check my version of Flash (think that it's Studio 8, but I've had it around from version 2) to see what all of the options are.
I've been handed many Flash animations that were Exported as .MOV with the Animation CODEC, and these have edited fine.
Other than the huge file sizes, AVI [Uncompressed] should work fine too. You might have resource issues, but that would depend on your system, more than on your NLE. I've used these with no issues many times.
Another likely candidate would be the free Lagarith Lossless CODEC. I use it for intermediate transfer and it edits fine in PrPro. I would assume that it would be the same in PrE, but cannot verify this.
On Monday, I'll be on my workstation with Flash and will tell you the exact version, plus the Export options available.
Good luck,
Hunt

DVD Playback - Image Quality Issues...

I'm curious to know if others are experience sub-par image quality when playing standard DVDs in the iMac with a 24" screen. The picture of the DVDs is sub-par compared to playback of the same DVD on a regular TV monitor. Also, playback is jumpy and or pixelated (looks like digitizing errors) despite the DVD being new and which plays back normally on a typical DVD player and TV monitor.
Is anyone having similar issues? My computer is new, so this seems odd...

Hi AM249
Welcome to Apple Discussions
SuperDrives are way more senitive that tray load players, is the DVD scrached or dirty?
Dennis

Image Quality Issues from FCE to iDVD

Similar Messages

Maybe you are looking for