Image stabilization only works half the time and is not consistent

When I access image stabilization, apply, and render it. Only sometimes will it work. Help.

daveypr
It looks like you have come up with the answer to your particular situation. Great.
But, so that your experience can be of benefit to those finding your thread
a. What version of Premiere Elements are you using and on what computer operating system is it running?
b. How were you not applying the video stabilizer to the whole video clip in the first place? Or, are you suggesting
that others apply the video stabilizer to all the clips on the Timeline instead of one video clip that may really need that effect?
Thanks.
ATR

Similar Messages

Alerts only working half the time, phone only rings half the time on incoming calls,settings all ok

my alerts for text messages, vip emails and voicemail are only sounding half the time and same with phone ringing on incoming calls...have checked settings, all are ok, have powered phone down and back up..any suggestions why i dont get alerts and phone ring all the time?

You can use http://support.apple.com/kb/ts5180. if that does not work you have to do repair.

Ethernet Port only working half the time

I recently moved into a dorm/hotel for the summer, and my internet worked for the first four days I was there. Then one day, it just didn't. It doesn't recognize that the cable is plugged into the wall. The AirPort is fine, and I've been using the wireless connections in the lobby. I had the IT department at the school check the ports in the room, and they believe they're fine. The ethernet cable seems to work in the lobby port, it works half the time in my friends room, but not at all in my room. Any ideas on what's going on or how to fix it?

You can use http://support.apple.com/kb/ts5180. if that does not work you have to do repair.

Left and Right-Click Only Working Half The Time

Ok, I have a Pavilion G6, A6Y36UA#ABA The last few days, my mouse (trackpad and buttons on the laptop NOT an external one) works fine but I can't left-click on the desktop, start menu (or apparently Paint?). Everytime I try to left-click, the right-click menu pops up (except in Paint. It doesn't do anything in Paint except not work). I tried right clicking thinking it was backwards but that doens't work.
I can left click as normal on the task bar, in Microsoft Word and in my Internet browser but I can't RIGHT click. (I can use the keyboard buton to bring up the right-click menu but it's still a pain) and for some reason, once I open more than one tab in Chrome, I can't go back to the earlier tabs unless I first close the tabs opened after it (also annoying).
I've restarted the computer. Uninstalled the touch pad driver, restarted, reinstalled the device driver, restarted and I'm STILL having problems with it. Please help!

I understand that your right-click and left-click buttons aren't quite working the way they should.
What happens if you boot into a clean boot state?
http://support.microsoft.com/kb/929135
Also, what happens if you boot into safe mode with networking? This can be done by turning the system on and pressing F8 about once a second to get the options for safe mode.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Audio only works half the time

Product name: HP 2000 Notebook PC
Product number: C2N26UA#ABA
Windows 8 64-bit
Sometimes my audio works, sometimes it doesn't. It was just working fine on a youtube video, then when I went to a different video I suddenly had no audio. Itunes doesn't have audio either, the song just stays at 0:00.
Restarting did nothing. Disabling and Re-enabling the speakers did nothing.
Please help,

Hello Intelligently,
Have you tried to reinstall the audio driver? Give that a shot and please let me know if it helps to resolve your issue.
Good luck!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

HT4993 I have an IPhone 5 and my on and off button works half the time. I have the aple care protection plan. How should I repair this problem?

My on and off button works half the time. How can I fix it? I have the aple care protection.

mende1 wrote:
AppleCare is relevant in case the OP isn't near any Apple Retail Store and he/she has to contact with Apple by phone. The iPhone only comes with 90 days of free telephone support, and without AppleCare, he/she would have to pay
Well, yes and no. If you call to arrange a repair there is no charge for the call. For tech support other than a repair there is.

Auto Import CD then Eject unreliable (works half the time)

I'm trying to re-rip my large collection of CDs, so I set my iTunes General Preferences to:
When you insert a CD: [Import CD and Eject]
Unfortunately, it doesn't work half the time. When it does work, it works as you might expect. I insert the CD, it spins up, iTunes mentions that it is looking up the track info online, and then it starts importing. When it's done it ejects. Perfect.
However, sometimes I insert the CD and things go differently. It spins up, iTunes acts like it's doing something, but then it stops as if no CD were present. There's no CD listed on my desktop nor on the left panel of iTunes. My only option here is to use the top menu bar Eject -> Eject Superdrive tool, then reinsert. The second insertion of the CD makes it work as listed in the previous paragraph.
At first it seemed to fail every few CDs, but now I have to do the in-out-in thing on every CD. Because this requires MORE attention on my part than doing it the normal, manual way, I have resorted to the old manual way. Insert CD, iTunes shows the CD, and then I say Import. Then I manually eject.
Anyone know why the auto feature isn't working reliably?
Thanks!
Michael

Actually the problem seems unrelated to whether I have auto-import turned on or not. The problem appears to be general, and related to CD identification.
I notice when it fails that iTunes has begun doing the CDDB (or whatever it's called now) lookup, but that only flashes briefly and then it goes away as if there were no CD in the drive. I eject, immediately reinsert, and it works the next time.
Now that I'm nearly done re-ripping my collection (450 CDs), I'd estimate that it fails to see/recognize/mount 1 out of every 5 CDs on the first try.

Does airplay mirror only work with the ipad2 and not ipad1

does airplay mirror only work with the ipad2 and not ipad1

But can it still stream video wirelessly?
For example, with the Digital AV Adapter I can watch video on my TV, but obviously it's wired.
I'd like a wireless option.

Can someone explain how to reset my security question answers. When I go to the manage my ID page it only asks me the questions and does not give me the option to change the answers

When I go to the manage my ID page it only asks me the questions and does not allow me to change the answers.

1. See my User Tip for some help: Some Solutions for Resetting Forgotten Security Questions: Apple Support Communities.
2. Here are two different but direct methods:
    a. Send Apple an email request at: Apple - Support - iTunes Store - Contact Us.
    b. Call Apple Support in your country: Customer Service: Contacting Apple for support
        and service.
3. For other queries about Apple ID see Frequently asked questions about Apple ID.
4. Rescue email address and how to reset Apple ID security questions

My AIM iChat works half the time can this be the issue?

I saw that AIM allows you to use your email as your screen name. My email is through a web hosting site. For example it's like [email protected]
Half the time I open up ichate\, it says I'm online and my status says I'm available with the little green bullet. My buddy collumn has the arrow down, but theres no one under it. It looks almost as if every person is offline. Why is this happening? Can it be my web hosting email screen name thats the problem?
I think I may have ran into this issue even with my old screen name but I can't remember. Any suggestions? It feels like its starting to be the majority of the time it's not working now.
Thanks

Hi
Yes AIM does allow you to register any Email address.
It come about from allowing Apple @Mac.com names and later @Me.com names, as well as several other ISPs email names, to be Valid AIM Screen Names.
If you search for it there is a different Registration Screen for this.
If your Buddy List is set up to Show Groups (View menu) and you only have one Group you will only see one grey bar with the Arrow that can be turned On and Off to Display the list or Not.
If you turn Off Show Groups then there is no grey Bar.
The Grey Bar should have the Name of the Group, what is this please ?
I would also use the View Menu to turn On Show Off line Buddies (I am not sure from your description this sis what you are doing)
If you delete a Group then you lose all the Buddies that were in that Group as well.
If the group you do have is "Recent Buddies" this is a Special Group only held on the AIM servers of people you have had contact with that are not in your Buddy List.
In iChat 4 and 5 you can turn Off the Display of this Group in the iChat Preferences > Accounts.
Next Level.
In iChat > Preferences > Accounts > Security Tab you can set who sees you as On-line.
Check you are not set to Block everyone.
If it is set to Allow Specific People then Buddies need to be in that list (Recent Buddies cannot be in this list)
NOTE:- Some of these settings can be influenced by using the same iChat details in a second (Test) Mac User account and using Parental Controls.
You will only really sort it by taking off the Parental Controls.
Based somewhat on the Note issue a second login can also effect things if it was logged in first.
9:53 PM Monday; October 4, 2010
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

My menu button doesnt work half the time

my menu button doesnt work half the time

You can copy the photos and other data to your computer, the mentioned article tells you how to.
The content of a backup is described here: iTunes: About iOS backups
Copying personal photos and videos from iPhone, iPad, or iPod touch to your computer

9860 Audio issues: Ringtones & alerts work half the time!

Hi to everyone,
I have a problem with my Torch 9860: the device is not ringing half the time. My alarm & alert tones don't sound--half the time.
I've had the .373 version and no audio problems with it, then i've made an upgrade to .440 and the problems came onto my device, so wipe and a new installation of .440 and the problems were still there, again a wipe and a new installation of .474 and the problems are still there!
Is there a way to solve it? Please post your opinions, suggestions and what I haveto/should/must do to fix the issue. I'm desperate, please help me! Thanks in advance!

Hey coldpatrix,
Welcome to the BlackBerry Support Community Forums.
Try resetting your Sound Profiles database using the BlackBerry Desktop Software as shown here: http://btsc.webapps.blackberry.com/btsc/KB10167
Thanks!
-HB
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

My phone thinks it is connected to a dock all the time and will not play any sound or ring what do i need to do?

my phone thinks that it is connected to a dock all the time and wont play ringtones or any other sound. I know that the speakers work because it will randomly play sound but for a very short amount of time and just recently stopped making sounds all together. the phone is almost brand new and has no damage I just bought it a few months ago. What can I do to fix the problem?

Clean iPhone charging port with a clean dry toothbrush. See if better. If not, clean again with toothbrush and small amount of Isopropyl Alcohol. See if better. If not, try Restore. If still a problem, and there is Warranty or AppleCare make Genius reservation and take to Apple for resolution.

Access + asp + working half the time....

So, I have been going through the forums and books and cant
seem to find an answer to my problem...I have gone through all the
online documentation and bought the book Dreamweaver 8 with ASP,
Coldfusion, and PHP (Jeffery Bardzell) and have finaly got a my
pages to work.
So...we have a local intranet with a basic form that is just
radio buttons, that then saves to an access database for easy
look-up later....customer survey....do you like the product (1-5)
etc...
Very basic, only 4 questions. The site is coded in .asp and
is hooked up to an access database that works perfectly. It saves
the results and I can display them just fine....most of the time.
I can go to the page and fill in the form 1 time, then i
click submit and it says it saved just fine, i check the database
and in fact it did. Then i go to fill in the form again and when i
click submit this time i get a page cannot be found error. I clear
all the cache and cookies...load the page up and most of the time
it will work correctly again....then i try the same steps again to
fill out a new form and i have to do all the steps over again just
to get the form to save.
The same thing happens when i try to view the results....1st
time works great.....2nd time not so well, get page errors, then
have to delete all cache and cookies....then loads up finally.
Why is it so buggy? Would copy and pasting my code for both
pages even be helpful? Im using all the functions inside
Dreamweaver . I just dont know if its an easy fix or if its saving
previous pages and giving me the error. Just really wierd, since in
the book im reading doesnt cover this at all.
I apologize for the long post, but just wanted to give as
much info as possible.
Thanks in advance
- Gary

You'll have this problem again if you continue to use Access.
As your site
grows, Access can't keep up for long.
Consider using SQL Server 2005 Express (free from Microsoft)
instead.
"GGSquared" <[email protected]> wrote in
message
news:f5s3s9$6qj$[email protected]..
> sorry for the replies....got it working though.
>
> I changed my connection from a DNS connection to a
DNS-less connection (i
> think thats the right terminology) and it works
perfectly....will keep
> this in
> mind in the future. Thanks.
>
> -Gary
>

Flash working half the time

Well, I feel as though I'm at my wits' end. This has been
going on for a few months now, and I'm starting to get aggravated.
I don't have a single problem with embedded flash objects anywhere
(Youtube, Homestar Runner, etc.) but when I want to open a saved
.swf file, I can't. Same when I try to access a solitary swf
directly from the web (
http://www.anysite.com/poppycock.swf).
I get the little yellow exclamation point icon in the bottom left
of the status bar in IE7 and double-clicking on it reveals this
gibberish "blah blah Object expected durr hurr hurr" error.
Screenshot provided below
http://img134.imageshack.us/img134/2618/problemqj5.png
I get this error 100% of the time when I meet the above
criteria and it is always guaranteed to be the same error. The
flash player always used to work fine before, and I never had
problems. I am running Vista Ultimate 32 bit with IE7, and this is
the only time I've run across something like this. Sure, I could
open .swf files in Media Player Classic, sure I could open them in
Firefox, sure I could reboot to XP Pro and use it perfectly fine
there, BUT THESE ARE NOT SOLUTIONS TO THE PROBLEM. I've been
through a multitude of pages of forums here and there, I've
uninstalled and reinstalled more times in more different ways than
I care to admit, but nothing helps. I've even been though that
entire 138 post thread about Vista near the top of the topic list
(before you recommend it) to no avail. I come to you kind people
because I'm out of ideas, and I refuse to install Failfox just as a
workaround to one stupid problem. I feel bad enough not being able
to get this to work, but it doesn't help when I can't locate a
single other person in real life or on the internet who's having
the same problem as me.
Any worthwhile advice you can spare, I'd be grateful.
Thanks

You can use http://support.apple.com/kb/ts5180. if that does not work you have to do repair.

Image stabilization only works half the time and is not consistent

Similar Messages

Maybe you are looking for