Image UI element is not displayed in Abap webdynpro application

Hi Experts,
I need your advice on below issue.
I have created new ABAP Webdynpro application just to
display employee photo.
When loading the application, I generated a dynamic URL for
a image in webdynpro application path in cache to map to Image UI Element. It
is working well in DEV and QA environment. But it is not displaying when loaded
in PRD system.
Please suggest where to check the cache properties in system
in order to resolve this issue.
The user can access the application path, is there any chance for security issue in the same path?
I suspect the URL is cleared before user access it, can it be controlled via any config?
Looking forward for your valuable inputs.
Thanks,
Swetha

HI Swetha,
Maybe the image is not present in MIME repository for the PRD system.
Please check.
Regards,
Hancila

Similar Messages

Header information not displaying in ABAP Webdynpro record working time

1. I am not seeing the header information, personnel number, name, cost center, on the ABAP Webdynpro record working time timesheet. When I run the timesheet profile in CAT2 the header contains the personnel number, name, cost center, but these do not display when the ABAP Webdynpro timesheet is run
2. Is there a version of the ABAP webdynpro timesheet that prompts for the personnel number, date and profile prior to executing the timesheet? I want to define an ESS link for managers to update timesheets of individual teammates. The teammate do not necessarily have to be their direct reports

Hi David,
CATS Webdynpro application is a OIF fpm. Please check if you have performed the FPM IDR configuration properly.
In standard, the ESS CATS does not prompt for the personnel number except in CE scenario. In MSS addon, you have an option to launch the ESS CATS application on-behalf of the employee. Please refer to the sap library documentation.
Hope this helps,
Regards,
Roy

Data is not displaying using ABAP WebDynPro

Hi,
Thanks in Advance.
I am trying to get the data of field AUFNR and KTEXT from AUFK table into Layout.
These are the attributes of Change Node
Node Name            PROD_ORDER
Interface Node                   : No
Input Element (Ext.)           : No
Dictionary structure AUFK
Cardinality                    :      0..n
Selection                     :       0..1
Init. Lead Selection       :   Yes
Singleton                     : No
Supply Function
Mapping Path
Method :
I have written the following code to fetch the data from AUFK table
method WDDOINIT .
Data: it_AUFK type standard table of AUFK,
      context_node type ref to if_wd_context_node.
select AUFNR KTEXT from AUFK INTO table it_AUFK.
if sy-subrc eq 0.
    context_node = wd_context->get_child_node( name = 'PROD_ORDER').
    context_node->bind_table( it_AUFK ).
endif.
endmethod.
There is no syntax error and getting activated. But while testing no data or even column is displaying into browser. It is blank page.
Am not sure where I am wrong. Please assist me.
Thanks

Hi ,
Check this for testing purpose :
Afer you have binded the internal table to the node , check if node has some vlaues in it or not :
Use this code to get the data of node into an internal table and see if the node is getting populating with data or not :
DATA lo_nd_cn_table TYPE REF TO if_wd_context_node.
    DATA lo_el_cn_table TYPE REF TO if_wd_context_element.
    DATA ls_cn_table TYPE wd_this->element_cn_table.
DATA it_table TYPE wd_this->elements_cn_table.
*   navigate from <CONTEXT> to <CN_TABLE> via lead selection
    lo_nd_cn_table = wd_context->get_child_node( name = wd_this->wdctx_cn_table ).
*lo_nd_cn_table->get_static_attributes_table( IMPORTING table = lt_table).*
<CN_table is my node binded to table.>

Firefox 33 HTML select elements do not display correctly

HTML form <select> elements do not display options correctly in Firefox 33.
For example:
<select id="field_4" class="mainForm" name="field_4">
<option value=""></option>
<option value="submitted"></option>
<option value="pending"></option>
<option value="discarded"></option>
<option value="all"></option>
</select>
should display a drop down with 5 elements (first one blank) but no elements at all are displayed.
The bounding box does not seem to be computed correctly so no options display.
I have observed this issue on multiple pages. These pages displayed correctly in older version of Firefox and they display correctly under IE. The problem occurs with no addons or additional themes installed. The problem does not occur in SafeMode so I suspect that it is theme related but the Default 33.0 theme is the only installed theme and it cannot be disabled outside of SafeMode. I tried installing and changing multiple themes without success. The problem persists after restarting Firefox and after rebooting the computer and even after uninstalling and re-installing Firefox.
I can supply a screen shot if needed.

You can try to disable hardware acceleration in Firefox.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
You need to close and restart Firefox after toggling this setting.
*https://support.mozilla.org/kb/upgrade-graphics-drivers-use-hardware-acceleration
If it works in Safe Mode and in normal mode with all extensions (Firefox/Tools > Add-ons > Extensions) disabled then try to find which extension is causing it by enabling one extension at a time until the problem reappears.
Close and restart Firefox after each change via "Firefox > Exit" (Windows: Firefox/File > Exit; Mac: Firefox > Quit Firefox; Linux: Firefox/File > Quit)
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

BPS Variable-Cost Element is not displaying Text

Dear Team,
We have a peculiar issue one of the BPS Variable defined for Cost Element is not displaying text in one of the Planning Layouts.
Another variable is displaying text in another layout.
Surprisingly...when I reused the old variable in the new layout it is also not displaying the text.
Am I missing something....appreciated your quick support.
Thanks & Best Regards
Srinivas

Have you check the layout Lead-Column setting? Is it set to 'Key/Description'?

Displaying both ABAP webdynpro and Java Webdynpro tasks in the UWL

Hi,
We have two an issue when trying to get the UWL to process two different types of workflow tasks : ABAP webdynpro and Java webdynpro.
Examples of these tasks are:
TS12300097 u2013 LeaveRequestApprover u2013 Java Webdynpro
TS17900100 - ASR_PROCESS_EXECUTE u2013 ABAP webdynpro
We have two backend systems configured
SAP_ECC_Financials u2013 This has the WAS host pointing to the java stack (xxx:50000)
SAP_ECC_Workflow u2013 This has the WAS host pointing to the ABAP stack (xxx.80xx)
In transaction SWFVISU all the tasks which use Java webdynpro have been configured to use the u2018Javau2019system (SAP_ECC_Financials) using the SYSTEM_ALIAS parameter
In the UWL configuration the system SAP_ECC_Workflow has been registered
In addition to this all u2018Javau2019 tasks have had an extra UWl config XML created to ensure that the SYSTEM_ALIAS is set to SAP_ECC_Financials
The system SAP_ECC_Workflow has been re-registered
The UWL cache has been cleared
However when we try to launch the java webdynpro tasks the system is trying to access the ABAP stack (It is still trying to access the Web AS location for the system SAP_ECC_Workflow even though the system alias was specified as SAP_ECC_Financials )
The ABAP webdynpro tasks (in this case a HCM process and form) are launched correctly
If we try the reverse (i.e register the Java system SAP_ECC_Financials and change the SYSTEM_ALIAS parameter for the ABAP webdynpro tasks to system SAP_ECC_Workflow) then the reverse happens. The java tasks can be launched and the ABAP tasks cannot.
Does anyone have a solution to this problem. Surely other people have implemented both ABAP and Java webdynpro workflows?
Any help much appreciated
Andrew

Thanks a lot for all your replies..
The workitem type registration has been done already, but still it doesn't work..
But here is the actual problem...
There is a link 'Execute Workitem' in the inbox of the approver, or the second level manager...
In the leave application, when we click on this link it is taking to the portal as the task is the Webdynpro Java application task. Whereas, when using ABAP webdynpro application task, it is taking to R/3 - which means that the user cannot access this link without R/3 access. The users are given only portal access, they don't have access to backend R/3.
The requirement is that the link has to take the user to portal directly instead of R/3 - i.e it should ask only for the portal id and password.
Since it was working fine with leave application, I changed the task to Java webdynpro task, but I think the Java Webdynpro application is not deployed in the server.
Please can anybody suggest.
Best Regards,
Sushmitha

ABAP WEBDYNPRO Application Administrative DATA URL HOST & PORT empty/blank

My ABAP Webdynpro applications do not display the preview layout in SE80 just white page - no errors ANYWHERE.
Also in SE80 the properties on the application look like: https://:/sap/bc/webdynpro/sap/z_rep_text. Don't know why https, but I think if I could figure that out I may resolve the issue. Can't see why trying to run HTTPS, then the host & port are empty.
I have been reading SDN posts & notes for days on this. I HAVE ACTIVATED ALL SERVICES that is not the issue. This works fine in our QA system so I know it is some sort of configuration in the development system that is causing this issue.
We just applied support packs to 23 on SAP ECC 6.0. SAP_ABAP, SAP_BASIS 7.0 level 23. This was working before patches. There had to be some note that changed what WEBdynpro's look at so now development is no longer working.
Any suggestions would be appretiated.
Regards,
Diane Szmurlo

We found that the profile parameter login/ticket_only_by_https was set to 1. Once we changed to 0 everything worked fine.

Cannot save the Interactive form downloaded from abap webdynpro application

Hello Everyone,
Can anyone help me here.
I have created an interactive form in SFP tcode and used in abap webdynpro application.
scenario is i can downloade the form,fill it, sign it,save it and submit the form.
Some thing is going wrong when i try to sign the form downloaded from the application.It is giving the error ->
The document could not be saved. there was a problem in reading the document(26).
When i try to sign the form save as dialog box will come where we can save the filled form.but here when itry to save it is giving above error.and also i cannot save thye form form file option.
but form is working fine from sfp tcode not form application link.
What is going wrong.Can somebody please help me here.
Regards,
Menaka.H.B

Check the enabled and readOnly property of the InteractiveFormUI element in your application.
enabled should be true and readOnly should be false.
Also just FYI interactive forms are licensable in Productive environment for which you need Adobe Credentials. You may contact SAP Account Manager and Note 736902 for it.
Chintan

How to set portal authorization in ABAP Webdynpro application

Hi All,
Do you have an idea how to set the visibility for Group UI element based on the Portal user authorization in ABAP Webdynpro , for example if the portal user A(or group A), logins into the portal on click of the ABAP Webdynpro IView then we need to set invisible (hide) the Group UI element in webdynpro ABAP Application.
Do you have any sample code on the same to handle the portal authorization in Webdynpro ABAP?? , please let me know if couldnu2019t understand this requirement or my explanation
Thanks,
PortalUser100

Hi Kris,
Thanks for your reply.
Like however we passed the UserID, can we pass Group ID also to the ABAP Webdynpro application??
Can u get me other things, how to copy of the existing component and i want to give the new name for the component and there i need to modify, i dont want to disturb original component before copy...let me know the procedure for the same??
Regards,
PortalUser100

Error occured while showing adobe form in abap webdynpro application

Dear SAP-Masters ,
This is the mail regarding the error occured while showing adobe form in abap webdynpro application .
When i run the adobe form seperately it works fine but with abap web dynpro , i'll get following error .
Pls tell me how to resolve this problem .
The following error text was processed in the system D35 : WebDynpro Exception:
The error occurred on the application server DV35_D35_00 and in the work process 2 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: UPDATE_PDF of program CL_WD_ADOBE_SERVICES==========CP
Method: CREATE_PDF of program CL_WD_ADOBE_SERVICES==========CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/LADOBE==================CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/LADOBE==================CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L8STANDARD==============CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L8STANDARD==============CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L7STANDARD==============CP
Method: CONV_VIEW_INTO_VE_ADAPTER_TREE of program CL_WDR_INTERNAL_WINDOW_ADAPTERCP
Method: SET_CONTENT_BY_WINDOW of program CL_WDR_INTERNAL_WINDOW_ADAPTERCP
Method: RENDER_WINDOWS of program CL_WDR_CLIENT_SSR=============CP

Hi Arjun ,
            Thanx for ur reply ,
            i got following results in ST22 dump analysis :
' An exception occurred that was not caught ' .
        and
Source Code Extract
Line
SourceCde
79
x_xml = get_wd_context_as_xml( data_source = data_source ).
80
m_pdf_object->set_data( formdata = x_xml ).
81
catch cx_fp_exception into lr_fpexc.
82
raise exception type cx_wd_general
83
exporting
84
previous = lr_fpexc.
85
endtry.
86
if fillable = abap_true.
87
       if m_version is initial.
88
         m_version = m_pdf_object->get_version_info( ).
89
       endif.
90
       if version < ''.
91
         set_usage_rights( m_pdf_object ).
92
       endif.
93
endif.
94
endif.
95
endif.
96
97
only call the ads if requested
98
if execute_ads_call = abap_true.
99
try.
100
      set document
101
m_pdf_object->set_document( pdfdata = pdf ).
102
103
      execute, call ADS
104
m_pdf_object->execute( ).
105
106
      get result
107
m_pdf_object->get_document( importing pdfdata = pdf ).
108
catch cx_fp_exception into lr_fpexc.
>>>>>
raise exception type cx_wd_general
110
exporting
111
previous = lr_fpexc.
112
endtry.
113
endif.
114
115
endmethod.
and
Error analysis
An exception occurred which is explained in detail below.
The exception, which is assigned to class 'CX_WD_GENERAL', was not caught and
therefore caused a runtime error.
The reason for the exception is:
WebDynpro Exception:
The occurrence of the exception is closely related to the occurrence of
a previous exception "CX_FP_RUNTIME_SYSTEM", which was raised in the program
"CL_FP_PDF_OBJECT==============CP",
specifically in line 255 of the (include) program
"CL_FP_PDF_OBJECT==============CM02Y".
The cause of the exception was:
ADS: com.adobe.ProcessingException: PDF is not interactive. Data can only be
|    imported into interactive forms.(201501).

Debugging abap webdynpro application

hi gurus,
an abap webdynpro application is runninf fine in developmernt server but not in production system. i transported the application again to refresh the application in production. but still the error persists. now i want to debug the abap editor in production system. so i wrote code 'BREAK POINT' in abap editor. but program is not stopping at this code. in dev as well as in prod system. please suggest.
Moderator Message: There is a separate forum for Webdypro for ABAP. Please post your question there.
Edited by: kishan P on Nov 29, 2010 1:25 PM

Hi
Few links to check:
External debugging is not working
Re: Debugging Abap webdynpro appln
Re: Unable to Debug WD ABAP application
Dedug is not working in Production Server.
a) Check on number of R/3 sessions opened at a time.
b) Check that user ID configured in portal using System Mapping Under 'Delegate User Administration' is the same user for which you are setting external breakpoint in backend system.

Steps for ABAP WebDynPro Application Creation in SE80

Hello
i can create ABAP WebDynPro iViews
but i dont know how to create ABAP WebDynPro Applications in R3
can someone help me out how to create simple ABAP WebDynPro Application in R3 from where i can create ABAP WebDynPro iViews
useful points will be rewarded
Regards
JM

Hi John,
You can create a ABAP webdynpro application in the transaction SE80.
Only precondition is u have authorization to develop Webdynpro Programming
in SE80.
Go to SE 80 --> Select webdynpro ABAP --? Create Project --> enter the name
and text-->save it --> right click ur Project Node --> create --> View.
Note: In Webdynpro Programmin if u want to create view or window or any new object u have to use rightclick on the project root node or corresponding node.
Regards,
Ramganesan K.

ASR_PROCESS_EXECUTE - ABAP Webdynpro application keeps looping

Hi,
We are implementing HCM Processes and Forms framework and trying to use the standard ABAP
Webdynpro application ASR_PROCESS_EXECUTE to be able to Start HR Personnel related processes.
Start Processes iview available with the HR Administrator package on the portal when clicked seems to be getting stuck in a loop.
When I try to test the application from SE80 on the backend, it seems to be going in some sort of loop and flashing message appears repeatedly 'Logon is being prepared.....logon is starting'. Looks like it keeps attempting to switch between http and https. The URL that appears in SE80 for the application is
http://servernmame.domainname.com/sap/bc/webdynpro/sap/asr_process_execute.
Instead of http...if I replace this URL with https://servernmame.domainname.com:443/sap/bc/webdynpro/sap/asr_process_execute it works fine
When I go to SICF and execute this Web dunpro application, it uses https in the URL and that works fine too.
We are on EhP3. How can i fix this issue? I want to be able to use standard iviews that will call this Webdynpro application using appropriate protocols.
Any ideas will be much appreciated
Thanks,
Saurabh
PS: this also sound like a portal issue, so posting in Portal forum too.

Its not the cache, i just wanted to let people know with similar problems.
It may be a problem with the parameters,
in RZ10, search for icm* parameters and search in SAP Help about each parameter and what should be their value. You will find that parameters are taking HTTPS
Also, one more thing, STRUSTSSO2, check if certificate is added in ACL and in production client as well..
This will solve all this kind of problems.

ASR_PROCESS_EXECUTE - ABAP Webdynpro application - http/https

Hi,
We are implementing HCM Processes and Forms framework and trying to use the standard ABAP
Webdynpro application ASR_PROCESS_EXECUTE to be able to Start HR Personnel related processes.
Start Processes iview available with the HR Administrator package on the portal when clicked seems to be getting stuck in a loop.
When I try to test the application from SE80 on the backend, it seems to be going in some sort of loop and flashing message appears repeatedly 'Logon is being prepared.....logon is starting'. Looks like it keeps attempting to switch between http and https. The URL that appears in SE80 for the application is
http://servernmame.domainname.com/sap/bc/webdynpro/sap/asr_process_execute.
Instead of http...if I replace this URL with https://servernmame.domainname.com:443/sap/bc/webdynpro/sap/asr_process_execute it works fine
When I go to SICF and execute this Web dunpro application, it uses https in the URL and that works fine too.
We are on EhP3. How can i fix this issue? I want to be able to use standard iviews that will call this Webdynpro application using appropriate protocols.
Any ideas will be much appreciated
Thanks,
Saurabh
PS: this also sound like a portal issue, so posting in Portal forum too.

Its not the cache, i just wanted to let people know with similar problems.
It may be a problem with the parameters,
in RZ10, search for icm* parameters and search in SAP Help about each parameter and what should be their value. You will find that parameters are taking HTTPS
Also, one more thing, STRUSTSSO2, check if certificate is added in ACL and in production client as well..
This will solve all this kind of problems.

User ID executing ABAP WebDynpro Application

Hello,
If we are running a ABAP WebDynpro application from a portal and we don´t want to create user ID both in portal and in SAP machine. Is it possible to have a system-user executing the applikation instead of the portal user ID ?
Many users will run this web Dynpro report and it would help a lot if they only needed authorization to the portal and not to the SAP machine.
Thanksful for your help.
Best Regards
Andreas

Hi Andreas,
it is absolutely possible to provide access to WDA applications from the portal using a specific generic user rather than a named SAP user. Within the SICF logon data tab for your application you can specify the user to be used.
However, be careful with this approach as it may breach the terms of your SAP license agreement - generally all WDA should be via a named user. That said SAP are normally quite flexible about this sort of thing - but I would be approaching your SAP client manager to discuss the particular situation and if they would be happy for you to do this. Especially given the description of your requirement I would be especially vigilant with getting prior approval from SAP, as this does look like the sort of situation where they would normally be wanting you to pay license fees for those users.
Good luck,
Chris

Image UI element is not displayed in Abap webdynpro application

Similar Messages

Maybe you are looking for